Simrad FX80 User manual

410999/977-800019H2/B
May2020©KongsbergMaritimeAS
SimradFX80
Catchmonitoringsystem
HarbourAcceptanceTest
ThisistheHarbourAcceptanceTestfortheSimradFX80Catch
monitoringsystem.
ThepurposeofthisHarbourAcceptanceTestistoverifythattheFX80
systemprovidedtothevesseliscorrectlyinstalled,andfullyfunctional.
ItisthenreadyfortheSeaAcceptanceTest.Whenallthetaskshave
beendone,thereportformmustbesignedbytherelevantparties.The
completeddocumentthenbecomestheofcialreport.
Vessel/Customer
Serialnumbers(ifapplicable)
Display
ProcessorUnit
BridgeControlUnit
CommunicationHub
Camera
Lamp

KongsbergMaritimeAS
www.kongsberg.com
Documentinformation
•Product:SimradFX80
•Document:HarbourAcceptanceTest
•Documentpartnumber:410999/977-800019H2
•Revision:B
•Dateofissue:1May2020
Copyright
TheinformationcontainedinthisdocumentremainsthesolepropertyofKongsbergMaritimeAS.Nopartof
thisdocumentmaybecopiedorreproducedinanyformorbyanymeans,andtheinformationcontainedwithin
itisnottobecommunicatedtoathirdparty,withoutthepriorwrittenconsentofKongsbergMaritimeAS.
Warning
Theequipmenttowhichthismanualappliesmustonlybeusedforthepurposeforwhichitwasdesigned.
Improperuseormaintenancemaycausedamagetotheequipmentand/orinjurytopersonnel.Y oumustbe
familiarwiththecontentsoftheappropriatemanualsbeforeattemptingtooperateorworkontheequipment.
KongsbergMaritimedisclaimsanyresponsibilityfordamageorinjurycausedbyimproperinstallation,
useormaintenanceoftheequipment.
Disclaimer
KongsbergMaritimeASendeavourstoensurethatallinformationinthisdocumentiscorrectandfairlystated,
butdoesnotacceptliabilityforanyerrorsoromissions.
Supportinformation
Ifyourequiremaintenanceorrepair,contactyourlocaldealer.Youcanalsocontactususingthefollowing
address:[email protected].Ifyouneedinformationaboutourotherproducts,visithttps:
//www.simrad.com.Onthiswebsiteyouwillalsondalistofourdealersanddistributors.

410999/977-800019H2/B3
Tableofcontents
INTRODUCTION...........................................................................5
Purpose....................................................................................................................................5
Personnelandlocation............................................................................................................6
Referenceddocuments............................................................................................................6
Toolsandtestequipment........................................................................................................7
HARDWAREANDSOFTWAREREGISTRATION..............................8
Vericationofpreviouslytesteditems....................................................................................8
Softwareitems........................................................................................................................9
Hardwareitems.....................................................................................................................10
Display.........................................................................................................................10
ProcessorUnit.............................................................................................................10
BridgeControlUnit......................................................................................................11
Camera..........................................................................................................................11
Lamp.............................................................................................................................11
CommunicationHub....................................................................................................11
TESTPROCEDURES....................................................................12
Inspectinglogisticitems.......................................................................................................13
Visualinspectionofthedisplay............................................................................................14
VisualinspectionoftheProcessorUnit................................................................................16
VisualinspectionoftheBridgeControlUnit.......................................................................18
Visualinspectionofthecamera............................................................................................20
Visualinspectionofthelamp................................................................................................21
VisualinspectionoftheCommunicationHub......................................................................23
TurningontheFX80Catchmonitoringsystemtostartthetest...........................................24
Verifyingthatthelivevideofeedisoperational...................................................................25
Verifyingthatthelampisoperational...................................................................................27
Recordingvideosequences...................................................................................................28
Verifyingthecommunicationwithanavigationsystem(GPS)............................................30
CUSTOMERACCEPTANCEFORM.................................................32
SECONDARYPROCEDURES........................................................33
PoweringuptheFX80..........................................................................................................33
Startingthelivevideofeed...................................................................................................35
Controllingtheambientlightconditionsforthecamera......................................................36
HarbourAcceptanceTest

4410999/977-800019H2/B
Recordingvideosequences...................................................................................................36
Replayingpreviouslyrecordedvideosequences..................................................................37
TurningofftheFX80............................................................................................................39
SimradFX80

410999/977-800019H2/B5
Introduction
Topics
Purpose,page5
Personnelandlocation,page6
Referenceddocuments,page6
Toolsandtestequipment,page7
Purpose
ThisistheHarbourAcceptanceTestfortheSimradFX80Catchmonitoringsystem.
ThepurposeofthisHarbourAcceptanceTestistoverifythattheFX80systemprovidedto
thevesseliscorrectlyinstalled,andfullyfunctional.ItisthenreadyfortheSeaAcceptance
Test.Whenallthetaskshavebeendone,thereportformmustbesignedbytherelevant
parties.Thecompleteddocumentthenbecomestheofcialreport.
Note
TheSimradFX80CatchmonitoringsystemcanbeprovidedwiththeoptionalSimrad
DFS75Trawlsonarsubsystem.ThisdocumentonlydescribesthetestfortheFX80units
andtheoperationalfunctionalityofferedbytheFX80software.ForDFS75trawlsonar
procedures,refertothededicatedHarbourAcceptanceTest.
Introduction

6410999/977-800019H2/B
Personnelandlocation
Successfulcompletionofthetestrequiresqualiedandexperiencedtestengineersand/or
technicians.
ThisHarbourAcceptanceTestisdoneonboardthevessel,alongsidethequay.Thetestis
donebypersonnelfromKongsbergMaritime.Allpersonnelmusthavegoodknowledge
oftheproductand/ormodule(s)athand.
ArepresentativefromanauthorizeddealerordistributorcandotheHarbourAcceptance
TestonbehalfofKongsbergMaritime.
Representativesfromtheclientand/orenduserarenormallypresenttowitnessthetest
andresults.
Aswithallassemblyandtestproceduresrelatedtoadvancedtechnicaland/orelectronic
equipment,theskilloftheoperatorisvitaltoasuccessfulcompletionofthetasks.Theonly
waytosecurehighqualityofourproductsisrstrateworkmanshipandhighprofessional
standardsthroughouttheproductionchain.
Itisequallyimportantthatallmembersoftheproductionandtestcrewsshowinitiative,and
arewillingtosuggestimprovementstofunctionality,design,proceduresanddocuments.If
youndamistakeinadocument,orndthatinformationismissing,offerthisinformation
totheproperauthoritieswithoutfurtherdelay.Likewise,yourexperienceasaskilledworker
isvaluable.Pleaseforwardanysuggestionstomakeimprovementstotheproduct,the
design,theproductionmethod,oranyothermattersrelatedtoyourexpertise.
Referenceddocuments
TheinstallationanduseoftheFX80isdescribedinseveraldocumentsandenduser
manuals.InternaltestdocumentsareusedthroughouttheproductionandtestoftheFX80.
Thislistisnotcomplete.Additionaldocumentsandendusermanualsareavailableforthe
FX80.ThesepublicationsarenotrelevantforthisHarbourAcceptanceTest.
Note
Unlessspeciedintheapplicableprocedure(s),theFX80publicationslistedherearenot
requiredduringthisHarbourAcceptanceTest.
Endusermanuals
•QuickStartGuide:977-00017021
•OperatorManual:977-00017041
SimradFX80HarbourAcceptanceTest

410999/977-800019H2/B7
•ReferenceManualandOn-lineHelp:977-00017001
•InstallationManual:977-00017011
Softwaredocuments
•SoftwareReleaseNote:388771
Customeracceptancetestprocedures
•FactoryAcceptanceTest:410824
•HarbourAcceptanceTest:410999
•SeaAcceptanceTest:411000
Internaltestprocedures
•Systemtest:0478-5052
Qualifyingdocuments
•ECDeclarationofConformity:413443
Toolsandtestequipment
SpecictoolsandtestequipmentarerequiredforthisSimradFX80HarbourAcceptance
Test.Therequiredtoolsandequipmentmustbemadeavailablebeforethetestcanstart.
Therequiredtestequipmentislisted.Foreachitem,recordtheinstrument'sserialnumber
and-ifrelevant-itscalibrationexpirydate.
Multimeter(Makeandmodel)SerialnumberCalibration
expirydate
Introduction

8410999/977-800019H2/B
Hardwareandsoftware
registration
Topics
Vericationofpreviouslytesteditems,page8
Softwareitems,page9
Hardwareitems,page10
Vericationofpreviouslytesteditems
Itisnotnecessarytollinregistrationtablesforsoftwareandhardwareitemsthathave
alreadybeenrecordedinaprevioustest.
AretheFX80userinterfacesoftwareandhardwareunitsthesameasthosetestedduringthe
FactoryAcceptanceTest?Ifthisisthecase,itisnotnecessarytollouttheregistration
tablesagain.
•Ifnochangeshavebeenmadetoneitherthesoftwarenorthehardware,signthetable
belowtoverifythis.
•Ifthesoftwarehasbeenupdated,recordthenewsoftwareversion.
•Ifhardwarechangeshavebeenmade(unitsarereplaced),allserialnumbersmustbe
recordedagain.
SimradFX80HarbourAcceptanceTest

410999/977-800019H2/B9
Vericationofpreviouslytesteditems
NeitheruserinterfacesoftwarenorhardwareunitshavebeenchangedonthisFX80systemsincetheFactory
AcceptanceTest.Forthisreason,theregistrationtableshavenotbeenlledout.
Dateandsignature
Softwareitems
EverysoftwareprogramthatisprovidedasapartoftheFX80deliverymustberegistered.
Partnumberandsoftwareversionmustberegistered.Whensoftwaremedia(USBash
drive,CD,DVDetc)isprovided,thepartnumberofthemediaandtheFX80software
versionprovidedonthemediamustberegistered.
SoftwarePartnumberSoftwareversion
SimradFX80software450-00950000
DATSSsoftware901–10280000
SoftwaremediaPartnumberSoftwareversion
SimradFX80Software+
Endusermanuals
Whenapplicable,thesoftwaremediaitemcanbeanymemorydevice(CD,DVD,USBashdrive,etc)
thatcontainstheFX80software.Enduserdocumentationmaybeincludedonthesamesoftwaremedia,or
providedonaseparatedevice.
Hardwareandsoftwareregistration

10410999/977-800019H2/B
Hardwareitems
Topics
Display,page10
ProcessorUnit,page10
BridgeControlUnit,page11
Camera,page11
Lamp,page11
CommunicationHub,page11
Display
EachdisplayprovidedwiththeFX80deliverymustbeuniquelyidentied.Make(s),
model(s),partnumber(s)andserialnumber(s)mustberegistered.Anyunitthatisnot
providedbyKongsbergMaritimeASdoesnotneedtoberegistered.
Display(Makeandmodel)PartnumberSerialnumber
Fillinthemake,modelandserialnumberforeachunitthatisprovidedwiththeFX80delivery.If
applicable,addtheordernumber.Theunitcontainsneithercircuitboardsnormodulesthatneedtobe
identiedseparately.
ProcessorUnit
TheProcessorUnitprovidedwiththeFX80deliverymustbeuniquelyidentied.Make,
model,partnumberandserialnumbermustberegistered.
ProcessorUnitPartnumberSerialnumber
901-10360000
Theunitcontainsneithercircuitboardsnormodulesthatneedtobeidentiedseparately.
SimradFX80HarbourAcceptanceTest

410999/977-800019H2/B11
BridgeControlUnit
TheBridgeControlUnitprovidedwiththeFX80deliverymustbeuniquelyidentied.
Make,model,partnumberandserialnumbermustberegistered.
BridgeControlUnitPartnumberSerialnumber
977-80040000
Theunitcontainsneithercircuitboardsnormodulesthatneedtobeidentiedseparately.
Camera
ThecameraprovidedwiththeFX80deliverymustbeuniquelyidentied.Make,model,part
numberandserialnumbermustberegistered.
CameraPartnumberSerialnumber
Theunitcontainsneithercircuitboardsnormodulesthatneedtobeidentiedseparately.
Lamp
ThelampprovidedwiththeFX80deliverymustbeuniquelyidentied.Make,model,part
numberandserialnumbermustberegistered.
LampPartnumberSerialnumber
Theunitcontainsneithercircuitboardsnormodulesthatneedtobeidentiedseparately.
CommunicationHub
TheCommunicationHubprovidedwiththeFX80deliverymustbeuniquelyidentied.
Make,model,partnumberandserialnumbermustberegistered.
CommunicationHubPartnumberSerialnumber
977-80050000
Theunitcontainsneithercircuitboardsnormodulesthatneedtobeidentiedseparately.
Hardwareandsoftwareregistration

12410999/977-800019H2/B
Testprocedures
Topics
Inspectinglogisticitems,page13
Visualinspectionofthedisplay,page14
VisualinspectionoftheProcessorUnit,page16
VisualinspectionoftheBridgeControlUnit,page18
Visualinspectionofthecamera,page20
Visualinspectionofthelamp,page21
VisualinspectionoftheCommunicationHub,page23
TurningontheFX80Catchmonitoringsystemtostartthetest,page24
Verifyingthatthelivevideofeedisoperational,page25
Verifyingthatthelampisoperational,page27
Recordingvideosequences,page28
Verifyingthecommunicationwithanavigationsystem(GPS),page30
SimradFX80HarbourAcceptanceTest

410999/977-800019H2/B13
Inspectinglogisticitems
AllrelevantlogisticitemsthatareincludedwiththeFX80deliveryshallbeinspected.Once
theFX80hasbeeninstalled,anditisreadyforHarbourAcceptanceTest,theitemsmustall
beonboardthevessel.Thisincludesend-usermanuals,softwareandsoftwaremedia.If
sparepartsareincludedinthedelivery,theseshallalsobeinspected.
Prerequisites
Thelistoflogisticitemstobedelivered(orderconrmationorcontract)mustbeavailable.
Alltherelevantitemsmustbeavailableforinspection.Neithertoolsnorinstrumentsare
required.
Context
ThevericationoftheoperatingsystemlicenseisonlyapplicableiftheProcessorUnitis
providedbySimradasapartoftheFX80delivery.
Procedure
1VerifythattheFX80end-usermanualshavebeenprovided.
2VerifythattheapplicableFX80softwaremedia(USBashdisk,CD,DVDetc)have
beenprovided.
3VerifythattheoperatingsystemsoftwarelicensestickersisplacedontheProcessor
Unit.
4VerifythatthesparepartsprovidedmatchestheorderconrmationfortheFX80
delivery.
Result
RequirementsResults
Alllogisticalitemsareavailableonboardthevessel.
Dateandsignature:
Relatedtopics
Customeracceptanceform,page32
Testprocedures

14410999/977-800019H2/B
Visualinspectionofthedisplay
AvisualinspectionoftheFX80displayisrequiredtoverifythattheunithasnotbeen
physicallydamagedduringtheinstallation.
Prerequisites
TheFX80isinstalledasspeciedintheFX80Installationmanual.Y ouneedthefollowing
equipment:
•Multimeter
Context
ThistestprocedureisonlyapplicablewhenthedisplayisprovidedbyKongsbergMaritime
asapartoftheFX80delivery.
Thefollowingrequirementsmustbemet:
•Thedisplayiscorrectlyinstalledwitheasyaccessformaintenanceandreplacement
ofparts.
•Thedisplayisfreefromscratches,dentsorotherphysicaldamage.
•Freeaccesstoalltheconnectorsonthedisplayisprovided.Allcablesareproperly
mountedwithenoughslack.
•Thedisplayisproperlygrounded.
Observetheinstallationshipyard’sproceduresforworkmanship,installationofphysical
units,andinstallationandterminationofcables.
Procedure
1Makesurethatthedisplayisinstalledinthecorrectlocation,andthatitissuitably
orientatedwithrespecttoambientlightconditionsandreections.
2Makesurethattheunitisnotphysicallydamaged,andthatthepaint-workisclean
withoutdentsorscratches.
Thephysicalhandlingoftheunitduringtheinstallationmayhavecausedsomeminor
scratchestothepaint-work.Thiscanbeaccepted.However,ifroughhandlinghas
causedseriousdamagetotheunit,thismustberecordedwithawrittenstatementand
necessaryphotos,sothatcorrectiveactionscanbemade.
3Makesurethattheunithasbeenidentiedwiththerelevantproductlabel(s),andthat
onelabelincludesthepartandserialnumbers.
4Makesurethattheunit’sserialnumberhasbeenrecordedinthelistofhardwareitems.
5Makesurethatthephysicalinstallationoftheunithasbeencompleted.
SimradFX80HarbourAcceptanceTest

410999/977-800019H2/B15
aMakesurethatthestructuretowhichthedisplayisfastenedissubstantialenough
toholdtheunitsecurelyunderalloperatingconditions.
bIfapplicable,makesurethatthedisplay(orthedisplaymountingbracket)is
boltedorweldedsecurelytothedeckand/orbulkhead.
cIftheunitisinstalledinsidearackorinaclosedcompartment,makesurethat
ampleventilationisprovidedtoavoidoverheating.
dMakesurethatamplespaceisprovidedaroundtheunittoallowformaintenance
andreplacementofparts.
eMakesurethatthebolts,screwsorstudsholdingtheunitareofthecorrectsize.
fMakesurethatthecorrectatandshake-proofwashershavebeenused.
gMakesurethatallnutshavebeentightenedproperly.
hMakesurethatallweldsandbracketshavebeenpaintedwiththecorrect
preservationmediumtopreventcorrosion.
6Makesurethattheunitisrmlyconnectedtoship'sground.
aMakesurethattheunitissecurelyconnectedtotheship'sgroundwithanearthing
strap.Thestrapmustbeinadditiontoanyincidentalelectricalcontactmadeby
themountinglugsontheunit.
bUseastandardmultimetertocheckthattheresistancebetweentheunitandthe
ship'sgroundisapproximately0(zero)Ω.
7Makesurethatcableinstallationhasbeencompleted.
aMakesurethatallcablesleadingtoandfromtheunithavebeenproperlymounted
andsecured.
bMakesurethatenoughslackhasbeenprovidedoneachcabletoallowfor
maintenanceandreplacement.
Result
TestrequirementsResults
Thedisplayiscorrectlyinstalledwitheasyaccessformaintenanceand
replacementofparts.
Thedisplayisfreefromscratches,dentsorotherphysicaldamage.
Freeaccesstoalltheconnectorsonthedisplayisprovided.Allcablesare
properlymountedwithenoughslack.
Thedisplayisproperlygrounded.
Dateandsignature:
Testprocedures

16410999/977-800019H2/B
Relatedtopics
Customeracceptanceform,page32
VisualinspectionoftheProcessorUnit
AvisualinspectionoftheFX80ProcessorUnitisrequiredtoverifythattheunithasnot
beenphysicallydamagedduringtheinstallation.
Prerequisites
TheFX80isinstalledasspeciedintheFX80Installationmanual.Y ouneedthefollowing
equipment:
•Multimeter
Context
TheProcessorUnitisnotastandardpartoftheFX80delivery.Thistestprocedureis
onlyapplicablewhentheProcessorUnitisprovidedbyKongsbergMaritimeasapartof
theFX80delivery.
Thefollowingrequirementsmustbemet:
•TheProcessorUnitiscorrectlyinstalledwitheasyaccessformaintenanceand
replacementofparts.
•TheProcessorUnitisfreefromscratches,dentsorotherphysicaldamage.
•FreeaccesstoalltheconnectorsontheProcessorUnitisprovided.Allcablesare
properlymountedwithenoughslack.
•TheProcessorUnitcanbefullyopenedforaccesstotheinternalparts.
•TheProcessorUnitisproperlyearthed.
Observetheinstallationshipyard’sproceduresforworkmanship,installationofphysical
units,andinstallationandterminationofcables.
Procedure
1Makesurethatthecomputerisinstalledinthecorrectlocation,andthatitissuitably
orientedforreplacementandcabling.
SimradFX80HarbourAcceptanceTest

410999/977-800019H2/B17
2Makesurethattheunitisnotphysicallydamaged,andthatthepaint-workisclean
withoutdentsorscratches.
Thephysicalhandlingoftheunitduringtheinstallationmayhavecausedsomeminor
scratchestothepaint-work.Thiscanbeaccepted.However,ifroughhandlinghas
causedseriousdamagetotheunit,thismustberecordedwithawrittenstatementand
necessaryphotos,sothatcorrectiveactionscanbemade.
3Makesurethattheunithasbeenidentiedwiththerelevantproductlabel(s),andthat
onelabelincludesthepartandserialnumbers.
4Makesurethattheunit’sserialnumberhasbeenrecordedinthelistofhardwareitems.
5Makesurethatthephysicalinstallationoftheunithasbeencompleted.
aMakesurethatyouhavefreeaccesstorearandfrontsideconnectorsonthe
computerformaintenancepurposes.
bMakesurethatamplespaceisprovidedtoopen/closeDVDand/orCDlids(if
relevant),andtoinsertandremoveUSBashdrives.
cIftheunitisinstalledinsidearackorinaclosedcompartment,makesurethat
ampleventilationisprovidedtoavoidoverheating.
dMakesurethatamplespaceisprovidedaroundtheunittoallowformaintenance
andreplacementofparts.
eMakesurethatthebolts,screwsorstudsholdingtheunitareofthecorrectsize.
fMakesurethatthecorrectatandshake-proofwashershavebeenused.
gMakesurethatallnutshavebeentightenedproperly.
hMakesurethatallweldsandbracketshavebeenpaintedwiththecorrect
preservationmediumtopreventcorrosion.
6Makesurethattheunitisrmlyconnectedtoship'sground.
aMakesurethattheunitissecurelyconnectedtotheship'sgroundwithanearthing
strap.Thestrapmustbeinadditiontoanyincidentalelectricalcontactmadeby
themountinglugsontheunit.
bUseastandardmultimetertocheckthattheresistancebetweentheunitandthe
ship'sgroundisapproximately0(zero)Ω.
7Makesurethatcableinstallationhasbeencompleted.
aMakesurethatallcablesleadingtoandfromtheunithavebeenproperlymounted
andsecured.
bMakesurethatenoughslackhasbeenprovidedoneachcabletoallowfor
maintenanceandreplacement.
Testprocedures

18410999/977-800019H2/B
Result
TestrequirementsResults
TheProcessorUnitiscorrectlyinstalledwitheasyaccessformaintenanceand
replacementofparts.
TheProcessorUnitisfreefromscratches,dentsorotherphysicaldamage.
FreeaccesstoalltheconnectorsontheProcessorUnitisprovided.Allcables
areproperlymountedwithenoughslack.
TheProcessorUnitcanbefullyopenedforaccesstotheinternalparts.
TheProcessorUnitisproperlyearthed.
Dateandsignature:
Relatedtopics
Customeracceptanceform,page32
VisualinspectionoftheBridgeControlUnit
AvisualinspectionoftheFX80BridgeControlUnitisrequiredtoverifythattheunithas
notbeenphysicallydamagedduringtheinstallation.
Prerequisites
TheFX80isinstalledasspeciedintheFX80Installationmanual.Y ouneedthefollowing
equipment:
•Multimeter
Context
Thefollowingrequirementsmustbemet:
•TheBridgeControlUnitiscorrectlyinstalledwitheasyaccessformaintenanceand
replacementofparts.
•TheBridgeControlUnitisfreefromscratches,dentsorotherphysicaldamage.
•FreeaccesstoalltheconnectorsontheBridgeControlUnitareprovided.
•AllcablestoandfromtheBridgeControlUnitareproperlymountedwithenoughslack.
•TheBridgeControlUnitisproperlygrounded.
Observetheinstallationshipyard’sproceduresforworkmanship,installationofphysical
units,andinstallationandterminationofcables.
SimradFX80HarbourAcceptanceTest

410999/977-800019H2/B19
Procedure
1VerifythattheBridgeControlUnitisinstalledinthecorrectlocation,andthatitis
suitablyorientedforeasymaintenanceandreplacementofparts.
2Makesurethattheunitisnotphysicallydamaged,andthatthepaint-workisclean
withoutdentsorscratches.
Thephysicalhandlingoftheunitduringtheinstallationmayhavecausedsomeminor
scratchestothepaint-work.Thiscanbeaccepted.However,ifroughhandlinghas
causedseriousdamagetotheunit,thismustberecordedwithawrittenstatementand
necessaryphotos,sothatcorrectiveactionscanbemade.
3Makesurethattheunithasbeenidentiedwiththerelevantproductlabel(s),andthat
onelabelincludesthepartandserialnumbers.
4Makesurethattheunit’sserialnumberhasbeenrecordedinthelistofhardwareitems.
5Makesurethatthephysicalinstallationoftheunithasbeencompleted.
aMakesurethatamplespaceisprovidedaroundtheunittoallowformaintenance
andreplacementofparts.
bMakesurethatthebolts,screwsorstudsholdingtheunitareofthecorrectsize.
cMakesurethatthecorrectatandshake-proofwashershavebeenused.
dMakesurethatallnutshavebeentightenedproperly.
6Makesurethattheunitisrmlyconnectedtoship'sground.
aMakesurethattheunitissecurelyconnectedtotheship'sgroundwithanearthing
strap.Thestrapmustbeinadditiontoanyincidentalelectricalcontactmadeby
themountinglugsontheunit.
bUseastandardmultimetertocheckthattheresistancebetweentheunitandthe
ship'sgroundisapproximately0(zero)Ω.
7Makesurethatcableinstallationhasbeencompleted.
aMakesurethatallcablesleadingtoandfromtheunithavebeenproperlymounted
andsecured.
bMakesurethatenoughslackhasbeenprovidedoneachcabletoallowfor
maintenanceandreplacement.
Result
TestrequirementsResults
TheBridgeControlUnitiscorrectlyinstalledwitheasyaccessformaintenance
andreplacementofparts.
TheBridgeControlUnitisfreefromscratches,dentsorotherphysicaldamage.
Testprocedures

20410999/977-800019H2/B
TestrequirementsResults
FreeaccesstoalltheconnectorsontheBridgeControlUnitareprovided.
AllcablestoandfromtheBridgeControlUnitareproperlymountedwith
enoughslack.
TheBridgeControlUnitisproperlygrounded.
Dateandsignature:
Relatedtopics
Customeracceptanceform,page32
Visualinspectionofthecamera
Avisualinspectionofthecameraisrequiredtoverifythattheunithasnotbeenphysically
damagedduringtransport,unpackingandinstallation.
Prerequisites
Neithertoolsnorinstrumentsarerequired.
Context
Thefollowingrequirementsmustbemet:
•Thecameraisinstalledinthecorrectlocation.
•Thecameraisfreefromscratches,dentsorotherphysicaldamage.
•Freeaccesstotheconnectoronthecameraisprovided.
Observetheinstallationshipyard’sproceduresforworkmanship,installationofphysical
units,andinstallationandterminationofcables.
Procedure
1Makesurethatthecameraisinstalledinthecorrectlocation.
2Makesurethattheunitisnotphysicallydamaged,andthatthepaint-workisclean
withoutdentsorscratches.
Thephysicalhandlingoftheunitduringtheinstallationmayhavecausedsomeminor
scratchestothepaint-work.Thiscanbeaccepted.However,ifroughhandlinghas
causedseriousdamagetotheunit,thismustberecordedwithawrittenstatementand
necessaryphotos,sothatcorrectiveactionscanbemade.
3Makesurethattheunithasbeenidentiedwiththerelevantproductlabel(s),andthat
onelabelincludesthepartandserialnumbers.
SimradFX80HarbourAcceptanceTest