sinoptim Res-Q-Rinse Operating instructions

1. Remove screw-top from bottle.
2. Add contents of
Res-Q-Rinse®saline
packet to bottle.
FIG 1
4. Cover bottle top
with palm of hand
and shake gently
to fully dissolve
saline powder.
FIG 3
5. Replace screw-top and
align mouthpiece with
back of bottle. FIG 4
DO NOT TWIST, ATTEMPT TO BEND
OR PULL ON MOUTHPIECE. BREAKAGE
MAY OCCUR.
3. Add room temperature
distilled or purified water
ONLY. 10 fl oz (300mL)
and 1 Res-Q-Rinse®saline
packet = Isotonic. FIG 2
DO NOT USE TAP WATER
WITH THIS DEVICE.
How to Use Res-Q-Rinse®
A big thank you for choosing Res-Q-Rinse® . Before first use, clean the product thoroughly.
Before each use, look for any damage or discoloration in bottle, mouthpiece, nosepiece and
tube. If discoloration is present, clean thoroughly by using the cleaning instructions on the
reverse side of this sheet. If damage is present, replace the device.
Safety: Res-Q-Rinse®is not a toy. Please keep all parts away from children.
DON’T LIKE TO READ? CHECK OUT OUR NIFTY HOW-TO VIDEO AT RESQRINSE.COM.
6. Align and position mouthpiece and nosepiece:
a. Adjust tube up or down as needed. Note, nosepiece should
create a firm seal inside nostril, but without stretching. FIG 5
b. Cup lips around mouthpiece and position nosepiece just
inside nostril opening.
7. Lean slightly
forward over
sink to allow
saline solution
to drain into
basin. FIG 6
8. Seal lips over mouthpiece,
tilt head away from bottle,
then gently squeeze bottle
and begin blowing through
mouthpiece to initiate flow
of saline solution. Do not
blow as hard as you can, just
enough to create a steady
flow. FIG 7
9. Continue blowing as solution flows up through nosepiece,
through nasal cavity and out opposite nostril into sink or
wherever you choose to rinse. Pressure of flow is controlled by
force of blowing. Use about half of saline solution, or 5 ounces,
per nostril. FIG 8
PRO TIP: RINSING IN THE SHOWER WORKS GREAT. THE NEIGHBOR’S FLOWERBED? SURE. WHY NOT?
10. Repeat for opposite side as needed.
IMPORTANT: DO NOT USE TAP WATER WITH THIS DEVICE. USE DISTILLED OR PURIFIED WATER ONLY.
SALINE
PACKET
FIG 1
DISTILLED
H20
FIG 2
FIG 3 FIG 4
FIG 5
FIG 6 FIG 7
FIG 8
DO NOT USE IF NASAL PASSAGES ARE COMPLETELY BLOCKED.

How To Clean Res-Q-Rinse®
Clean the Res-Q-Rinse®device thoroughly after every use. Replace the device
every three months, or anytime it appears damaged or discolored and cannot be
successfully cleaned. Clean Res-Q-Rinse®bottle, mouthpiece, nosepiece and tube
with DISTILLED OR PURIFIED WATER ONLY.Never use tap water with the Res-Q-Rinse®device,
unless it has been thoroughly boiled and cooled. Do not clean the device in boiling
water or in the dishwasher.
1. Empty any remaining solution from bottle.
2. Pour distilled or purified water over bottle, mouthpiece, nosepiece and
tube to rinse.
3. Add a drop of liquid dishwashing detergent to bottle and fill partway with
distilled or purified water. Concentrated white vinegar or isopropyl alcohol (99%
concentration) may be used in place of detergent.
4. Replace bottle cap and tube setup.
5. Use palm of hand to cover openings in nosepiece and mouthpiece, then shake
bottle vigorously.
6. Uncover openings and squeeze bottle so that soapy water flushes through tube.
7. Remove nosepiece and clean separately with preferred cleaner. Completely
rinse bottle and nosepiece thoroughly with distilled or purified water. Replace
when tube and nosepiece are dry.
For Individual Use Only. Don’t share – that would be gross.
It is important to keep the Res-Q-Rinse®device clean and free from contaminants.
Replace bottle after three months. Visit website for subscription options.
About Our Saline
Simply put, nasal rinsing works. And at SinOptim we take great pride in our simple,
all-natural saline formulas. Every Res-Q-Rinse®saline packet provides a gentle
isotonic saline solution that is perfectly pH balanced for our bodies.
Directions: Use 1-2 packets per 10 fl oz (300 mL) or as directed by physician.
Isotonic = 1 packet Hypertonic = 2 or more packets
Note: Fill lines on the Res-Q-Rinse®bottles are approximations. Due to manufacturing
variation, for a precise mixture, measure water before adding to bottle. This also
applies if using another manufacturer’s 8 fl oz saline packet.
Questions? Learn more at www.ResQRinse.com or contact us directly at
1.800.707.1414.
Safety: Res-Q-Rinse®is not a toy. Please keep all parts away from children.
This product is latex-free.
Rinse. Breathe. Live.™
For more information, call
1.800.707.1414 or email
[e-mail]
SO10003 v2
SinOptim, LLC
205 Ken Pratt Blvd, Ste 120 #77
Longmont, CO 80501