Kowa VANTELIN ANKLE SUPPORT User manual

1
SIZE GUIDE (Shoe Size)
INSTRUCTION FOR USE
VANTELIN ANKLE SUPPORT
S: Women!4.5in~6.5in / 22cm~24cm
Men!4in~6in / 22cm~24cm
M: Women!6.5in~8.5in / 24cm~26cm Men!
6in~8in / 24cm~26cm
L: Women!8.5in~10.5in / 26cm~28cm Men!
8in~10in / 26cm~28cm
If two sizes apply, chose the larger.
FEATURES
Figure-Eight Taping Structure
The knitted mesh figure-eight wraps around the ankle and foot
to provide extra joint support when running, walking and
performing daily activities.
Arch Support Taping Structure
The arch support taping structure raises the arch to enhance
its cushioning function, thereby reducing fatigue.
Anchor Structure
Seamless top and bottom cuffs prevent slipping of the support
and stabilize the figure-eight taping structure.

2
INDICATION
Used for daily joint discomfort.
INSTRUCTION FOR USE
1. Slide foot into ankle support with the bottom of the “V” pointing down.
2. Position the figure-eight taping structure around your ankle and arch of foot
3. Smooth the brace so there is no bunching. Always wear the support directly on skin. If the
support is not positioned correctly, it may not function as intended.
WARNING
• Do not use if you have: (1) a sprain, fracture, or ligament injury, (2) peripheral vascular disorder,
(3) abnormality such as injury, blotchiness, rash at site where support is to be worn, or (4)
chronic dermatitis/allergy to chemical textile or rubber.
If you experience any of these, stop using immediately and consult your healthcare professional.
• Use only as directed.
• Use correct size.
• Do not use when sleeping.
CARE INSTRUCTIONS (USE LAUNDRY NET)
1. Wash separately below 40ºC.
2. Do not bleach.
3. Do not tumble dry.
4. Hang and air-dry. Avoid direct sunlight.
5. Iron at low temperature. Do not steam iron.
6. Do not dry clean.
PACKAGING
Box of 1 unit.
PRODUCT OWNER
KOWA COMPANY, LTD.
4-14, 3-chome, Nihonbashi-Honcho, Chuo-ku, Tokyo 103-8433, Japan
MANUFACTURING SITE
IIDA HOSIERY CO., LTD.
1619, Yamaguchi, Kouhoku-machi, Kishima-gun, Saga-Ken 849-0501 Japan.

5
SIZE GUIDE:
S: 12in-13in / 31cm-34cm
INSTRUCTION FOR USE
VANTELIN KNEE SUPPORT
M: 13in-14.5in / 34cm-37cm
L: 14.5in-16in / 37cm-40cm
XL: 16in-17in / 40cm-43cm
Measure around knee as shown. If two sizes apply, chose the larger.
FEATURES
U-shaped Taping Structure
U-shaped taping structure supports the kneecap to reduce stress
to the patellar tendon when extending the knee
Slit Knit structure
Breathable front and back mesh panels provide ventilation and
reduce bunching behind the knee
Anchor structure
Seamless top and bottom cuffs prevent slipping of the support and
stabilize the U-shaped taping structure
INDICATION
Used for daily joint discomfort.
INSTRUCTION FOR USE
1. Slide leg into knee support with the bottom of the “V” pointing down.
2. Position the U-shaped taping structure below and on either side of your knee.
3. Smooth the brace so there is no bunching when you bend your knee. Always wear the support
directly on skin. If the support is not positioned correctly, it may not function as intended.

6
WARNING
• Do not use if you have: (1) a sprain, fracture, or ligament injury, (2) peripheral vascular disorder,
(3) abnormality such as injury, blotchiness, rash at site where support is to be worn, or (4)
chronic dermatitis/allergy to chemical textile or rubber.
If you experience any of these, stop using immediately and consult your healthcare professional.
• Use only as directed.
• Use correct size.
• Do not use when sleeping.
CARE INSTRUCTIONS (USE LAUNDRY NET)
1. Wash separately below 40ºC.
2. Do not bleach.
3. Do not tumble dry.
4. Hang and air-dry. Avoid direct sunlight.
5. Iron at low temperature. Do not steam iron.
6. Do not dry clean.
PACKAGING
Box of 1 unit.
PRODUCT OWNER
KOWA COMPANY, LTD.
4-14, 3-chome, Nihonbashi-Honcho, Chuo-ku, Tokyo 103-8433, Japan
MANUFACTURING SITE
IIDA HOSIERY CO., LTD.
1619, Yamaguchi, Kouhoku-machi, Kishima-gun, Saga-Ken 849-0501 Japan.

9
SIZE GUIDE
INSTRUCTION FOR USE
VANTELIN WRIST SUPPORT
S：5.5in~6in / 13cm~15cm
M：6in~6.5in / 15cm~17cm
L：6.5in~7.5in / 17cm~19cm
Measure around arm about 7cm/3inches above wrist. If two sizes apply, chose the larger.
FEATURES
Sandwich-Taping Structure
The sandwich-taping structure on the front and back of the wrist
works like a splint to limit excessive wrist movement and reduce
discomfort.
Thumb-Lock Structure
Maintains the correct position of the support while allowing free
movement of the thumb.
Anchor Structure
Seamless top and bottom cuffs prevent the support from slipping
and stabilize the taping structure.
INDICATION
Used for daily joint discomfort.
INSTRUCTION FOR USE
1. Slide hand into wrist support with the bottom of the “V” pointing toward the fingers and the
thumb protruding out the thumb hole (same position for left or right hand).

10
2. Smooth the brace and make sure the knitted mesh structures are straight and centered on the top
and bottom of the wrist. Always wear the support directly on skin. If the support is not
positioned correctly, it may not function as intended.
WARNING
• Do not use if you have: (1) a sprain, fracture, or ligament injury, (2) peripheral vascular disorder,
(3) abnormality such as injury, blotchiness, rash at site where support is to be worn, or (4)
chronic dermatitis/allergy to chemical textile or rubber.
If you experience any of these, stop using immediately and consult your healthcare professional.
• Use only as directed.
• Use correct size.
• Do not use when sleeping.
CARE INSTRUCTIONS (USE LAUNDRY NET)
1. Wash separately below 40ºC.
2. Do not bleach.
3. Do not tumble dry.
4. Hang and air-dry. Avoid direct sunlight.
5. Iron at low temperature. Do not steam iron.
6. Do not dry clean.
PACKAGING
Box of 1 unit.
PRODUCT OWNER
KOWA COMPANY, LTD.
4-14, 3-chome, Nihonbashi-Honcho, Chuo-ku, Tokyo 103-8433, Japan
MANUFACTURING SITE
IIDA HOSIERY CO., LTD.
1619, Yamaguchi, Kouhoku-machi, Kishima-gun, Saga-Ken 849-0501 Japan.

13
SIZE GUIDE
INSTRUCTION FOR USE
VANTELIN ELBOW SUPPORT
S：7.5in~9in / 19cm~22cm
M：9in~10in / 22cm~25cm
L：10in~11in / 25cm~28cm
Measure around forearm as shown. If two sizes apply, chose the larger.
FEATURES
X-Shaped Taping Structure
X-shaped taping structure on the inside of the elbow limits
excessive movement and reduces discomfort when lifting
heavy objects.
Ventilated Mesh Panels
The knitted mesh structure located on the outside of elbow
allows the support to adapt to the elbow’s movement.
Anchor Structure
Seamless top and bottom cuffs prevent slipping of the support
and stabilize the X-shaped taping structure.
INDICATION
Used for daily joint discomfort.
INSTRUCTION FOR USE
1. Slide arm into elbow support with the bottom of the “V” pointing down.

14
2. Position the knitted mesh X-shape on the inside of your elbow, with the center of the X aligned
to the crease of your elbow.
3. Smooth the brace so there is no bunching when you bend your elbow. Always wear the support
directly on skin. If the support is not positioned correctly, it may not function as intended.
WARNING
• Do not use if you have: (1) a sprain, fracture, or ligament injury, (2) peripheral vascular disorder,
(3) abnormality such as injury, blotchiness, rash at site where support is to be worn, or (4)
chronic dermatitis/allergy to chemical textile or rubber.
If you experience any of these, stop using immediately and consult your healthcare professional.
• Use only as directed.
• Use correct size.
• Do not use when sleeping.
CARE INSTRUCTIONS (USE LAUNDRY NET)
1. Wash separately below 40ºC.
2. Do not bleach.
3. Do not tumble dry.
4. Hang and air-dry. Avoid direct sunlight.
5. Iron at low temperature. Do not steam iron.
6. Do not dry clean.
PACKAGING
Box of 1 unit.
PRODUCT OWNER
KOWA COMPANY, LTD.
4-14, 3-chome, Nihonbashi-Honcho, Chuo-ku, Tokyo 103-8433, Japan
MANUFACTURING SITE
IIDA HOSIERY CO., LTD.
1619, Yamaguchi, Kouhoku-machi, Kishima-gun, Saga-Ken 849-0501 Japan.

SIZE GUIDE
INSTRUCTION FOR USE
VANTELIN BACK SUPPORT
M：26in~34in / 65cm~85cm
L：32in~39in / 80cm~100cm
XL：37in~45in / 95cm~115cm
Measure your waistline at your navel as shown. If two sizes apply, chose the larger.
FEATURES
Restricts Backward Bending
Built-in Cross-Net Taping provides
wide coverage of the lower back. It
limits excessive “back-and-forth
motion” and “twist” which cause pain.
Helps Improve Posture
Ergonomically designed support holds
the lower abdomen and lower back
firmly in place to help establish a
heathy posture.
Enhanced Breathability
Use of thin breathable fabric improves
ventilation to help you stay cool and
dry.
INDICATION
Used for lower back discomfort.
INSTRUCTION FOR USE
1. Hold each end of the brace (Note the tag on the inside right. Arrows should be pointing
up).

2. Pull the left side firmly across your middle section and about 5cm/2in below the navel.
※Do not position above the navel.
3. Overlap the right side and secure with the hook-and-loop fastener.
WARNING
• Do not use if you have: (1) a sprain, fracture, or ligament injury, (2) peripheral vascular
disorder, (3) abnormality such as injury, blotchiness, rash at site where support is to be
worn, or (4) chronic dermatitis/allergy to chemical textile or rubber.
If you experience any of these, stop using immediately and consult your healthcare
professional.
• Do not use if you are or may become pregnant.
• Use correct size. (see Size Guide)
• Do not use when sleeping.
• Do not wear brace directly on skin.
• Do not over-tighten.
• Do not wear brace for extended periods of time.
CARE INSTRUCTIONS (Close fasteners prior to washing)
1. Hand wash separately below 40℃. Do not wring.
2. Do not bleach.
3. Do not tumble dry.
4. Hang and air-dry. Avoid direct sunlight.
5. Do not iron.
6. Do not dry clean.
7. Professional wet cleaning.
PACKAGING
Box of 1 unit.
PRODUCT OWNER
KOWA COMPANY, LTD.
4-14, 3-chome, Nihonbashi-Honcho, Chuo-ku, Tokyo 103-8433, Japan
MANUFACTURING SITE
D-M CHAIN Cooperative
5-321 Osaki, Kahoku-shi, Ishikawa 929-1127 Japan