Siqura SA-PD24 User manual

Unpack
Connector Definition
Installation Notices Connectors
Opening the housing
Mounting
SA-PD24
2MP Corrosion proof compact PTZ dome, 20x zoom
Quick Start Guide
Find additional manuals, the datasheet,
the EU Declaration of Conformity, and
the latest firmware for this product at:
Siqura.com/downloads/software
SA-PD24 Camera Unit
Note 1: Subject to modification. Actual product and accessories may differ in appearance.
CAUTION:
INSTALLATION SHALL BE PERFORMED BY QUALIFIED PERSONNEL ONLY.
INSTALLATION SHALL BE IN ACCCORDANCE WITH LOCAL PROCEDURES.
THE CAMERA CONTAINS BATTERIES. DISPOSE OF USED BATTERIES IN
ACCORDANCE WITH LOCAL REGULATIONS.
IF YOU USE AN EXTERNAL POWER SUPPLY, CONTACT SIQURA TO MAKE SURE
THAT THE POWER SUPPLY HAS THE PROPER POWER SPECIFICATIONS.
MAKE SURE THAT THE POWER SUPPLY COMPLIES WITH LPS REQUIREMENTS.
WHEN INSTALLING THE CAMERA, HOOK UP THE CAMERA WITH THE ANTI-DROP
CHAIN OF THE PENDANT TO THE ANTI-DROP RING (SEE FIGURE 1). FOR MORE
INFORMATION, CONTACT SIQURA.
THE CAMERA IS TO BE CONNECTED ONLY TO POE NETWORKS WITHOUT
ROUTING TO THE OUTSIDE PLANT.
For the connector definitions, see table 1.
© Siqura B.V. 2019
Version 1.0 (20191015)
SA-PD24 QSG
No.
Connector
Definition
1
Power (3
-pin terminal)
12 Vdc or 24 Vac power connection
2
I/O (6
-pin terminal)
Pink
Alarm Input 1
Gray
Alarm Input 2
Green
Alarm Input 3
Blue
Alarm Input 4
Brown
GND
Yellow
Alarm Output
3
RJ
-45 Port
10/100Mb Fast Ethernet network and PoE
4
Stereo Jack
Audio Output
5
Stereo Jack
Audio Input
Table 1 Connector definitions
M8 bolts, washers and nuts
RJ45 water protection (IP66/67)

Replacing the bubble Accessing the camera Auto detect with SDM2
1st time camera login Browser-based viewer Browser-based Viewer
IP = dhcp
Network Switch
DHCP
Siqura.com/downloads/software
SDM2-vx.xx-setup.zip
2
1
admin
admin
qwer1234
x6W@oM0a!9#
Modify user with
strong password
x6W@oM0a!9#F
1
2
2
3
4
5
IP = 192.168.30.1
Netmask: 255.255.255.0
IP = 192.168.30.220
Network Switch
DHCP
3