Siqura CD820F1 User manual

Installation Manual
I n s t a l l a t i o n M a n u a l
CD820 Series
Compact Network Fixed-Dome Camera

Page 2
Note: To ensure proper operation, please read this manual thoroughly before using the product and retain the
information for future reference.
Copyright © 2013 Siqura B.V.
All rights reserved.
CD820
Installation Manual v2 (121508-2)
AIT55MW10
Nothing from this publication may be copied, translated, reproduced, and/or published by means of printing,
photocopying, or by any other means without the prior written permission of Siqura.
Siqura reserves the right to modify specifications stated in this manual.
Brand names
Any brand names mentioned in this manual are registered trademarks of their respective owners.
Liability
Siqura accepts no liability for claims from third parties arising from improper use other than that stated in this
manual.
Although considerable care has been taken to ensure a correct and suitably comprehensive description of all
relevant product components, this manual may nonetheless contain errors and inaccuracies. We invite you to offer
your suggestions and comments by email via [e-mail]. Your feedback will help us to further
improve our documentation.
More information
If you have any comments or queries concerning any aspect related to the product, do not hesitate to contact:
Siqura B.V.
Zuidelijk Halfrond 4
2801 DD Gouda
The Netherlands
General : [phone]
Fax : [phone]
E-mail : [e-mail]
WWW : www.siqura.com
For a full list of TKH Security Solutions sales offices, see the last page of this manual.

Page 3
Contents
1INTRODUCTION ....................................................................................................................................... 5
2SAFETY INFORMATION ............................................................................................................................ 7
2.1 CAUTIONS ..................................................................................................................................................7
2.2 REGULATIONS .............................................................................................................................................8
3PRODUCT DESCRIPTION ........................................................................................................................... 9
3.1 PRODUCT OVERVIEW ...................................................................................................................................9
3.2 PACKAGE CONTENTS ..................................................................................................................................10
4CABLE DEFINITION AND REQUIREMENTS ............................................................................................... 11
4.1 CAMERA OVERVIEW...................................................................................................................................11
4.2 INTERFACE REQUIREMENTS..........................................................................................................................12
4.3 SYSTEM COMPATIBILITY ..............................................................................................................................12
4.4 POWER OVER ETHERNET CABLE CONNECTION .................................................................................................12
4.4.1 RJ-45 connectors ..............................................................................................................................12
4.4.2 Ethernet cable connection................................................................................................................13
5INSTALLATION ....................................................................................................................................... 15
5.1 DIMENSIONS ............................................................................................................................................15
5.2 HARD-SURFACE INSTALLATION .....................................................................................................................16
5.3 CONNECTING AUDIO TO THE CD820.............................................................................................................17
6APPENDIX: TECHNICAL SPECIFICATIONS ................................................................................................ 19

Page 5
C h a p t e r 1
1Introduction
Document scope
This manual applies to Siqura's indoor and outdoor high definition (HD) mini vandal-proof
fixed-dome IP cameras, the CD820 series. It describes how to install and connect the CD820.
Operation and configuration of the CD820 is covered in the user manual.
Intended audience
This manual is aimed at installers and technicians involved in the installation of network devices,
such as the CD820.
Assumed skills and know-how
To work with the CD820 camera, an installer or technician must have adequate knowledge and
skills in the fields of:
CCTV systems and components
Electrical wiring and low-voltage electrical connections
Ethernet network technologies and Internet Protocol (IP)
Windows environments
Web browsers
Video, audio, data, and contact closure transmissions
Video compression methods
Specifications
The information given in this manual was current when published. Siqura reserves the right to
revise and improve its products. All specifications are subject to change without notice.
Important information
Before proceeding, please read and observe all instructions and warnings in this manual. Retain
this manual with the original bill of sale for future reference and, if necessary, warranty service.
When unpacking your product, check for missing or damaged items. If any item is missing, or if
damage is evident, do not install or operate this product. Contact your supplier for assistance.
We like to hear from you!
At Siqura, customer satisfaction is our first priority. We welcome and value your opinion about
our products and services. Should you detect errors or inaccuracies in this manual, we would be
grateful if you would inform us. We invite you to offer your suggestions and comments by email
via [e-mail]. Your feedback will help us to further improve our documentation.

CD820 Series
Page 6
Typographical conventions
Before you start using this guide, it is important to understand the typographical conventions
used in the documentation. The following kinds of formatting in the text identify special
information.
Formatting convention
Type of Information
Numbered list
Step-by-step procedures. You can follow these instructions to
complete a specific task.
Special Bold
Items you must select, such as menu options, command buttons, or
items in a list.
Emphasis
Used to emphasize the importance of a point or for variable
expressions such as parameters.
CAPITALS
Names of keys on the keyboard. for example, SHIFT, CTRL, or
ALT.
KEY+KEY
Key combinations for which the user must press and hold down one
key and then press another, for example, CTRL+P, or ALT+F4.

Page 7
C h a p t e r 2
2Safety Information
This chapter provides cautions on what to do and what not to do when working with or handling
your CD820 unit. It also offers information on product compliance with environmental
regulations and explains how to dispose of the product at the end of its service life.
In This Chapter
Cautions ........................................................................... 7
Regulations ....................................................................... 8
2.1 Cautions
Handle the camera carefully.
Do not abuse the camera. Avoid striking, shaking, etc. as the camera can be damaged by
improper handling or storage.
Do not disassemble the camera.
To prevent electric shock, do not remove screws or covers. There are no user serviceable parts
inside. Please consult technical support if a camera is suspected of malfunctioning.
Do not operate the camera beyond the specified temperature,
humidity, and power source ratings.
Verify that the power source is appropriate before you plug in and operate the unit. If the camera
is installed outdoors, make sure it is sheltered from direct sunlight.
Do not use strong or abrasive detergents when cleaning the
camera.
Use a dry cloth to clean the camera when it is dirty. If the dirt is hard to remove, use a mild
detergent and wipe gently. To clean the lens, use lens tissue or a cotton tipped applicator and
ethanol. DO NOT clean the lens with strong detergents.
Ensure that camera installation is performed by a specialist.
Only qualified service personnel or system installers should install and connect this product.
Never face the camera towards the sun.
Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the
sun or other extremely bright objects, as this can damage the camera.

CD820 Series
Page 8
2.2 Regulations
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions.
This device may not cause harmful interference.
This device must accept any interference received, including interference
that may cause undesired operation.
This symbol on the product or on its packaging indicates that this product shall not
be treated as household waste in accordance with Directive 2002/96/EC. Instead
it shall be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. By proper waste handling of this product you
ensure that it has no negative consequences for the environment and human
health, which could otherwise be caused if this product is thrown intothe garbage
bin. The recycling of materials will help to conserve natural resources.
For more information on how to recycle this product, please contact your local city
office, your household waste disposal service or the seller of the product.
Compliance is evidenced by written declaration from our suppliers, assuring that
any potential trace contamination levels of restricted substances are below the
maximum level set by EU Directive 2002/95/EC, or are exempted due to their
application.

Page 9
C h a p t e r 3
3Product Description
The CD820 fixed-dome network camera features a 1/2.7" CMOS image sensor (1920 x 1080
pixels) that delivers unparalleled image quality and produces images of rapid moving objects
with minimum motion blurring. Dual streaming enables users to view MJPEG and H.264 video to
achieve superior image quality and conserve bandwidth. With full high-definition (HD)
resolution, users can monitor critical areas with greater detail than ever before.
In This Chapter
Product Overview ............................................................. 9
Package Contents .............................................................. 10
3.1 Product Overview
Siqura CD820F1 and CD820F2
Multiple resolutions: 1080p/720p
1/2.7” progressive scan CMOS imager
Dual-stream H.264 and MJPEG video
ONVIF-compliant
Audio - mic input
4mm fixed lens (CD820F1), 2.8 mm fixed lens (CD820F2)
Compact surface mount design
Ruggedised construction
802.3af Power-over-Ethernet/12 VDC
IP66 ingress rating

CD820 Series
Page 10
3.2 Package Contents
Before proceeding, please verify that the box contains the items listed here. If any item is
missing or has defects, do not install or operate the product. Contact your supplier for
assistance.
CD820 package contents
CD820 camera
Plastic anchors (x3)
Self-tapping screws (x3)
Rubber washer (×1, casing)
Rubber washers (×3, baseplate)
Security TORX
CD (search tool and manuals)
Quick Start Guide
The supplied self-tapping screws are mainly for softer substrate/material installations such as
wood. For other installation environments such as cement walls, pre-drill the holes and use
plastic anchors before fastening the supplied self-tapping screw to the wall.

Page 11
C h a p t e r 4
4Cable Definition and Requirements
Read the instructions provided in this chapter thoroughly before installing the CD820 camera.
In This Chapter
Camera Overview .............................................................. 11
Interface Requirements ...................................................... 12
System Compatibility.......................................................... 12
Power over Ethernet Cable Connection ................................. 12
4.1 Camera Overview
Under the CD820 camera's outer cover, installers can physically adjust the angle and lens
settings as well as access the reset button.
Important: The lens is factory focused for a wide depth of field when the housing cover is in place.
The CD820's lens is focused to compensate for the slight shift in focus that is caused by the clear
bubble. In the event that the focus needs to be adjusted, loosen the focus screw, refocus the
lens, verify that the camera is still in focus with the housing cover in place, and then tighten
gently. Do not over tighten!
Overview of the internal configuration of the CD820 camera
Feature
Description
1. Reset button
Press with an appropriate tool, such as a small screwdriver or a paperclip,
to restore the default settings.
2. Pan screw
Loosen to adjust the pan angle.
3. Focus screw
Loosen to adjust the lens focus. Rotate the lens to the left and/or right to
adjust the focus. Please note that under normal circumstances, the lens is
factory focused and should not require adjusting.
4. Tilt screw
Loosen to adjust the tilt angle.
5. Micro SD card slot
Insert a micro secure digital (micro SD) card for storing recordings locally

CD820 Series
Page 12
4.2 Interface Requirements
The CD820 camera can be accessed and configured from a standard web browser supporting
ActiveX controls. The browsing PC must meet the system requirements described in the table
below.
Items
Minimum Requirements
Personal Computer
1 Intel Pentium M, 3 GHz or higher
2 Intel Core2 Duo, 2 GHz or higher
3 2 GB RAM or higher
Operating System
Windows Vista or XP
Web Browser
Microsoft Internet Explorer 6.0 or later
Network Card
10Base-T (10 Mbps) or 100Base-TX (100 Mbps) operation
Viewer
ActiveX control plug-in for Microsoft IE
4.3 System Compatibility
To ensure system compatibility, download the latest firmware at http://www.siqura.com/.
4.4 Power over Ethernet Cable Connection
The CD820 uses Power over Ethernet (PoE), which requires that IEEE 802.3af Power Sourcing
Equipment (PSE) is available on the network. The use of Cat 5 Ethernet cable is recommended
for network connection. For the best transmission quality, limit the cable length to no more than
100 meters.
Connect one end of the Ethernet cable to the camera's RJ-45 connector and the other end of the
cable to the IEEE 802.3af network switch or PC. The CD820 consumes 3.8W of power.
Note: In some cases, you may need to use an Ethernet crossover cable when directly connecting
the CD820 to a PC.
4.4.1 RJ-45 connectors
A waterproof cable and RJ-45 connector are attached to the CD820 camera. Follow the
instructions in this section to complete the IP camera connection.
The CD820's waterproof RJ-45 connection

Cable Definition and Requirements
Page 13
4.4.2 Ethernet cable connection
To connect the CD820's Ethernet cable.
1. Unpack the CD820 compact fixed-dome IP camera.
2. Use the security TORX tool to remove the housing cover.
Removing the housing cover
3. After connecting the Ethernet cable, replace the dome cover.
4. Run the Ethernet cable through the Waterproof RJ-45 Screw-On Plug.
5. Connect one end of the Ethernet cable to the RJ-45 dongle.
6. Completely tighten the sealing nut of the waterproof RJ-45 screw-on plug.
7. Connect the other end of the Ethernet cable to the Power Sourcing Equipment (PSE).
RJ-45 dongle
Note: For proper operation of the camera, use a waterproof PoE switch/hub.

Page 15
C h a p t e r 5
5Installation
The CD820 can be installed directly on a wall or ceiling, provided the surface has sufficient
strength to support the camera.
In This Chapter
Dimensions ....................................................................... 15
Hard-Surface Installation .................................................... 16
Connecting Audio to the CD820 ........................................... 17
5.1 Dimensions
The CD820 dimensions are provided in millimeters in the figures below.
CD820 dimensions in millimeters

CD820 Series
Page 16
5.2 Hard-Surface Installation
To install the CD820 on a wall or hard ceiling
1. Unpack the CD820 compact fixed-dome IP camera.
2. Use the security TORX tool to remove the housing cover.
Removing the housing cover
3. Insert the rubber washers in both sides of the holes on the bottom plate of the camera.
Rubber washer position
4. Mark the position of the two screw holes.
5. Drill holes that are slightly smaller than the supplied 4 mm screw anchors.
6. Insert the anchors into the drilled holes.
7. Fasten the CD820 to the ceiling or wall with the supplied screws.
8. Connect the Cat 5 Ethernet cable to the RJ-45 connector. If necessary, connect the M8 audio
connector to the audio source. For more information, see Connecting Audio to the CD820
(on page 17).
9. After the dome body is mounted and the cable connected, type the IP address of the camera
into an Internet Explorer 6.0 or higher web browser to access the camera's internal settings.
The default user name is Admin with 1234 as the default password.
The camera view should appear on the home page. For more information, consult the CD820
& (I)FD820 Series - User Manual.
10. Use the home page of the camera's web interface to check the position of the camera view.
11. If necessary, loosen the tilt or pan screws to adjust the camera's angle. See Camera
Overview (on page 11) for more information on the various screws under the camera's
cover.
12. Gently tighten the angle screws and replace the dome cover.

Installation
Page 17
5.3 Connecting Audio to the CD820
Users can connect an external microphone to the CD820 through a waterproof M8 connector.
The CD820 offers Simplex listen-only audio. This allows audio to be received, so one site can
listen to the other site.
M8 audio connector pin assignments
To enable audio in the CD820
1. Connect the camera's audio connector to an external microphone.
2. In the internal web pages, go to Streaming > Audio to enable the audio feature.
If necessary, refer to the CD820 & (I)FD820 Series - User Manual and follow the procedure
to log on to browser-based interface to view the camera image.
3. Under Transmission Mode, click to select Simplex (Listen only).
4. Click Save.

Page 19
C h a p t e r 6
6Appendix: Technical Specifications
Item
Siqura CD820
CAMERA
Image sensor
1/2.7" CMOS (1920x1080 pixels)
Progressive scan
Yes
Video streaming
Simultaneous H.264 + MJPEG
H.264 video
output
Single stream
1920X1080@30fps
Dual stream
720p@30fps OR 720p + D1/CIF@30fps
MJPEG video
output
Single stream
1920X1080@30fps
Dual stream
720p + D1/CIF@30fps
Video compression
H.264 Main Profile/MJPEG
Minimum illumination
0.1 lux color
Signal-to-noise ratio
>40 dB
Lens
4 mm (CD820F1) / 2.8 mm (CD820F2) fixed focal
Shutter speed
1~1/10000 s
Lens type
Fixed iris
IMAGE CONTROL
Brightness
Manual
Exposure
Auto/Manual
Sharpness
Manual
Contrast
Manual
White balance
Auto/Manual
Saturation
Manual
Hue
Manual
AGC
Auto
Rotation
Flip, Mirror, and 180°
FUNCTIONS
Motion detection
On / Off
Privacy masks
2
On-screen display
Date, time, and user-specified text (20 characters)
AUDIO
One-way audio
Mic. in (4-pin barrel connector)
Compression
G.711/G.726
STORAGE

CD820 Series
Page 20
Item
Siqura CD820
Storage
Micro secure digital (SD) card, 32GB
NETWORK
Interface
10/100 Ethernet (RJ-45)
Protocol
TCP/IP, UDP, RTP, RTSP, HTTP, ICMP, FTP, SMTP, DHCP,
NTP, PPPoE, UPnP, and IGMP
Internet browser
Internet Explorer 6.0 or higher
User levels
User and administrator
User account
20
MECHANICAL
Dimension
Ø116.9 x 50 mm (Ø4.60 x 1.97 in.)
Connectors
RJ-45
Mount
Surface mount
Weight
7.03 oz. (200 g)
Color
RAL-9003 (Signal White)
Bubble
Transparent polycarbonate
Cover
Polycarbonate/ABS blend
ENVIRONMENT
Operating temperature
-14°F to +122°F
(-10°C to +50°C)
Relative humidity
10 - 90% (as long as there is no condensation)
Ingress protection
IP66
Regulatory
CE, FCC, RoHS
Impact rating
IK10
POWER
Power
802.3af Power over Ethernet (PoE) / 12 VDC (via M8
connector)
Power consumption
3.8W
Power connector
Waterproof RJ-45 connector
Note: Weight and dimensions are approximate. All specifications are subject to change without
notice.