Siqura BC820 User manual

BC820 Series
HD box camera with Day/Night, H.264
Installation Manual

Note: To ensure proper operation, please read this manual thoroughly before using the
product and retain the information for future reference.
Copyright © 2014 Siqura B.V.
All rights reserved.
BC820
Installation Manual v3 (120811-3)
AIT55
Nothing from this publication may be copied, translated, reproduced, and/or published by
means of printing, photocopying, or by any other means without the prior written permission
of Siqura.
Siqura reserves the right to modify specifications stated in this manual.
Brand names
Any brand names mentioned in this manual are registered trademarks of their respective
owners.
Liability
Siqura accepts no liability for claims from third parties arising from improper use other than
that stated in this manual.
Although considerable care has been taken to ensure a correct and suitably comprehensive
description of all relevant product components, this manual may nonetheless contain errors
and inaccuracies. We invite you to offer your suggestions and comments by email via
[email protected]. Your feedback will help us to further improve our documentation.
How to contact us
If you have any comments or queries concerning any aspect related to the product, do not
hesitate to contact:
Siqura B.V.
Zuidelijk Halfrond 4
2801 DD Gouda
The Netherlands
General : [phone]
Fax : [phone]
E-mail : [email protected]
WWW : www.siqura.com
2

Contents
1 Introduction .............................................................................................. 4
2 Safety and compliance .............................................................................. 5
2.1 Safety ................................................................................................ 5
2.2 Compliance ......................................................................................... 6
3 Product overview ...................................................................................... 7
3.1 Common features ................................................................................ 7
3.2 Models ............................................................................................... 8
3.3 Description ......................................................................................... 9
3.4 Package contents ................................................................................. 10
4 Back panel ................................................................................................ 11
4.1 Switches, connectors, and buttons ......................................................... 11
4.2 System requirements ........................................................................... 12
4.3 System compatibility ............................................................................ 12
5 Cable connection ....................................................................................... 13
5.1 Power options ..................................................................................... 13
5.2 Power the camera ................................................................................ 13
5.3 Alarm application ................................................................................. 14
5.4 Audio ................................................................................................. 14
5.5 Micro SD storage ................................................................................. 14
6 Mount the camera and the lens ................................................................. 15
6.1 Mount the camera ................................................................................ 15
6.2 Mount the lens .................................................................................... 15
Appendix: Technical specifications ............................................................ 17
BC820 and BC820-SFP ......................................................................... 18
BC820MP5 and BC820MP5-SFP .............................................................. 21
BC820H1 and BC820H1-SFP .................................................................. 24
3

1 Introduction
Document scope
This manual applies to the BC820 series, Siqura's high-definition IP box cameras. It describes
how to install BC820 cameras. For instructions on how to operate and configure a BC820, see
the user manual of the specific model.
Intended audience
This manual is intended for technicians and operators involved in the installation of BC820
cameras.
Assumed skills and know-how
To work with the BC820 camera, an installer or technician must have adequate knowledge
and skills in the following fields.
● Ethernet network technologies and Internet Protocol (IP)
● Windows environments
● Web browsers
● Video, audio, data, and contact closure transmissions
● Video compression methods
Specifications
The information given in this manual was current when published. Siqura reserves the right to
revise and improve its products. All specifications are subject to change without notice.
Important information
Before proceeding, please read and observe all instructions and warnings in this manual.
Retain this manual with the original bill of sale for future reference and, if necessary, warranty
service. When unpacking your product, check for missing or damaged items. If any item is
missing, or if damage is evident, do not install or operate this product. Contact your supplier
for assistance.
We like to hear from you!
At Siqura, customer satisfaction is our first priority. We welcome and value your opinion about
our products and services. Should you detect errors or inaccuracies in this manual, we would
be grateful if you would inform us. We invite you to offer your suggestions and comments by
email via [email protected]. Your feedback will help us to further improve our
documentation.
4

2 Safety and compliance
This chapter provides cautions on what to do and what not to do when working with or
handling your BC820 unit. It also offers information on product compliance with
environmental regulations and explains how to dispose of the product at the end of its service
life.
In This Chapter
2.1 Safety...................................................................................................................5
2.2 Compliance............................................................................................................6
2.1 Safety
The safety information contained in this section, and on other pages of this manual, must be
observed whenever this unit is operated, serviced, or repaired. Failure to comply with any
precaution, warning, or instruction noted in the manual is in violation of the standards of
design, manufacture, and intended use of the module. Siqura assumes no liability for the
customer's failure to comply with any of these safety requirements.
Make sure that camera installation is performed by a specialist
Only qualified service personnel or system installers should install and connect this product.
Handle the camera carefully
Do not abuse the camera. Avoid bumping and shaking. The camera can be damaged by
improper handling or storage.
Do not disassemble the camera
To prevent electric shock, do not remove screws or covers. There are no user serviceable
parts inside. Consult technical support if a camera is suspected of malfunctioning.
Do not exceed the ratings given in the Technical Specifications
Verify that the power source is appropriate before you plug in and operate the unit. Use the
camera under conditions where the temperature remains within the range given in the
Technical Specifications of this product.
Prevent exposure to optical radiation (units with SFP interface)
Warning: Optical equipment presents potential hazards to testing and servicing personnel,
owing to high levels of optical radiation.
When using magnifying optical instruments, avoid looking directly into the output of an
operating transmitter or into the end of a fiber connected to an operating transmitter, or there
will be a risk of permanent eye damage. Precautions should be taken to prevent exposure to
optical radiation when the unit is removed from its enclosure or when the fiber is disconnected
from the unit. The optical radiation is invisible to the eye.
Use of controls or adjustments or procedures other than those specified herein may result in
hazardous radiation exposure.
5

Never face the camera towards the sun
Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at
the sun or other extremely bright objects, as this can damage the camera.
Do not expose indoor models to moisture
The indoor dome camera is designed for indoor use or use in locations where it is protected
from rain and moisture. Turn the power off immediately if the camera is wet and ask a
qualified technician for servicing. Moisture can damage the camera and also create the danger
of electric shock.
Do not use strong or abrasive detergents to clean the camera
Use a dry cloth to clean the camera when it is dirty. If the dirt is hard to remove, use a mild
detergent and wipe gently. To clean the lens, use lens tissue or a cotton tipped applicator and
ethanol. Do not clean the lens with strong detergents.
2.2 Compliance
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions.
● This device may not cause harmful interference.
● This device must accept any interference received, including
interference that may cause undesired operation.
This symbol on the product or on its packaging indicates that this
product shall not be treated as household waste in accordance with
Directive 2002/96/EC. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and
electronic equipment. By proper waste handling of this product you
ensure that it has no negative consequences for the environment
and human health, which could otherwise be caused if this product is
thrown into the garbage bin. The recycling of materials will help to
conserve natural resources.
For more information on how to recycle this product, please contact
your local city office, your household waste disposal service or the
seller of the product.
Compliance is evidenced by written declaration from our suppliers,
assuring that any potential trace contamination levels of restricted
substances are below the maximum level set by EU Directive
2002/95/EC, or are exempted due to their application.
Safety and compliance
6

3 Product overview
The Siqura BC820 is a full-featured IP camera providing high-quality high-definition images.
This chapter introduces the models and their features.
In This Chapter
3.1 Common features................................................................................................... 7
3.2 Models.................................................................................................................. 8
3.3 Description............................................................................................................ 9
3.4 Package contents..................................................................................................10
3.1 Common features
The BC820 camera offers a solution for both indoor and outdoor applications. Via its built-in
webpages, users can configure the camera's live video stream and an extensive range of
parameters specific to the camera. As a part of the Siqura collection, the BC820 cameras can
be easily integrated with nearly all Siqura software and hardware solutions, including video
codecs/servers, IP and analog cameras, video management and configuration software, and
network storage devices.
BC820 series cameras share the following features.
● Quad stream H.264 (1080p/D1)
● Frame rate setting from 1-30 fps NTSC mode / 1-25 fps PAL mode
● Bit rate settings from 1-8192
● Siqura Programming Interface (HTTP API) support
● HTTPS
● 802.1x
● IPv6
● QOS (DiffServ)
● IP address filter
● SNMP v1/v2
● ONVIF Profile S conformant
● Micro SD support
● Tampering alarm
● Analogue output (always available)
● Browser support upgrade -IE, Chrome, Firefox, Safari
● Wide dynamic range
● Backlight compensation
● Video motion detection
● Privacy masks
7

3.2 Models
BC820 & BC820-SFP Network box camera with Day/Night
● 1/2.7 Progressive scan CMOS imager
● Quad stream of H.264 and MJPEG video (1080p/D1)
● Two-way audio
● Day/Night (IR cut filter)
● Alarm I/O (1 output, 1 input)
● ROHS compliant
● 24 Vac / 12 Vdc / 802.3af PoE (BC820 only)
● RS-485 PTZ support
● SFP Interface (BC820-SFP)
BC820MP5 & BC820MP5-SFP 5 Megapixel indoor network box camera with Day/
Night
● 1/2.5 Progressive scan CMOS imager
● Up to 5 megapixel resolution (2592 x 1944)
● Quad stream of H.264 and MJPEG video (1080p/D1)
● Two-way audio
● Day/Night (IR cut filter)
● Alarm I/O (1 output, 1 input)
● ROHS compliant
● 24 Vac / 12 Vdc / 802.3af PoE (BC820MP5 only)
● RS-485 PTZ support
● SFP Interface (BC820MP5-SFP)
BC820H1 & BC820H1-SFP Network box camera with integrated optics
● Integrated 18x optical zoom, 8x digital zoom -
autofocus module
● 1/2.7 Progressive scan CMOS imager
● Full HD 1080p resolution
● Quad stream of H.264 and MJPEG video
● Two-way audio
● Day/Night (IR cut filter)
● Alarm I/O (1 output, 1 input)
● ROHS compliant
● 24 Vac / 12 Vdc / 802.3af PoE (BC820H1 only)
● SFP Interface (BC820H1-SFP)
Product overview
8

3.3 Description
General
The Siqura BC820 is a full-featured fixed IP camera providing high-quality high-definition
images.
Multistream high definition
The BC820 series cameras have quad-stream capability for simultaneous streaming of H.
264/H.264 or H.264/MJPEG. Full HD 1080p streaming with a D1 second stream or dual 720p
streams are possible. Multiple combinations of resolution and frame rate can be configured to
satisfy different live viewing and recording scenarios.
Open standards
Multiple options are available to easily integrate the BC820 into a video management system.
In support of open standards, these cameras are compliant with the ONVIF Profile S
specification in addition to Siqura's Open Streaming Architecture’s (OSA) HTTP API.
Day/Night
The BC820 provides automatic day/night functionality, for use in low light situations. Under
poor lighting conditions, the camera automatically becomes infrared-sensitive by removing the
IR cut filter. This Day/Night feature ensures that even in minimal light the camera still
produces clear images.
Backlight compensation
Backlight compensation enhances image visibility in difficult lighting conditions. In situations
where the observed object is unclear due to being underlit or overlit (such as in a hallway
entrance with many windows), backlight compensation improves image exposure by using the
light near the object as a reference.
Wide dynamic range
Wide dynamic range solves the problem of overlit images by combining the best of two
pictures with different light references.
Power source choices
The BC820 can be powered over the network with 802.3af compliant Power-over-Ethernet
(PoE) sources (SFP models excepted). The cameras can also be powered by 12 Vdc or 24 Vac
(terminal block).
SFP interface
The SFP models are equipped with an SFP interface. It supports the Siqura XSNet™ SFP range
for Ethernet over fiber and the Siqura ECO-plug™ for Ethernet over coax.
Privacy masks
Privacy masks cover sections of the image. This feature is often requested for situations such
as city centre surveillance and point of sale keypads.
Product overview
9

3.4 Package contents
BC820/BC820-SFP & BC820MP5/BC820MP5-SFP
BC820/BC820-SFP
(lens not included)
C mount lens
adapter
Back focus adjuster Quick Start Guide
CD containing
manuals and
DeviceSearch
application
Terminal block Wire clip 1.5 A Power adapter
BC820H1 & BC820H1-SFP
BC820/BC820-SFP Terminal block CD containing
manuals and
DeviceSearch
application
Quick Start Guide
Product overview
10

4 Back panel
This chapter provides information about the dimensions, switch location and definition, and
cable connections of the BC820.
In This Chapter
4.1 Switches, connectors, and buttons.......................................................................... 11
4.2 System requirements............................................................................................ 12
4.3 System compatibility............................................................................................. 12
4.1 Switches, connectors, and buttons
BC820 series cameras have the following connectors:
BC820/BC820MP5 back panel BC820H1 back panel
Feature Description
1 CC/Data In/Out Connectors for data and contact closures
1. Output+
2. Output-
3. Input+
4. Input-
5. GND
6. D-
7. D+
2 Network RJ-45 with PoE (SFP connector on -SFP models
3 Power connector AC 24 V / DC 12 V power connection
+ AC 24 V: Power-1 DC 12 V: Power
AC 24 V: Earth
GND
DC 12 V: Reserved
- AC 24 V: Power-2 DC 12 V: GND
4 Video (BNC connector) For analog video output
5 Power LED Power connection indication (green light)
6 Auto Iris connector Auto iris lens connector (standard only)
7 Audio Out/Audio In Two-way audio transmission
11

Feature Description
8 Micro SD card slot For video and snapshots storage
9 Network LEDs Network connection and activity indicator
10 Reset button Reset to factory default
Switch definition
To reset the camera to its factory default settings
● With the camera powered up, push and hold the reset button for 30 seconds.
All settings, including the camera's IP address, are reset to the original factory settings.
4.2 System requirements
The BC820 camera can be accessed and configured from a standard web browser supporting
ActiveX controls. The browsing PC must meet the system requirements described in the table
below.
Item System requirement
Microprocessor Intel Pentium M, 2.16 GHz or higher or
Intel CoreTM2 Duo, 2.0 GHz or higher
Memory At least 2GB RAM
Operating system Windows Vista / Windows XP / Windows 7
Web browser Internet Explorer 6.0 or later, Firefox, Chrome, Safari
Network card 10Base-T (10 Mbps) or 100Base-TX (100 Mbps) operation
Viewer ActiveX control plug-in for Microsoft IE
Minimum requirements
4.3 System compatibility
To ensure system compatibility, download the latest firmware from Support > Software on
the Siqura website at http://www.siqura.com/.
Back panel
12

5 Cable connection
This chapter explains how to power the camera and gives information about connecting alarm
and audio cabling.
In This Chapter
5.1 Power options.......................................................................................................13
5.2 Power the camera................................................................................................. 13
5.3 Alarm application.................................................................................................. 14
5.4 Audio.................................................................................................................. 14
5.5 Micro SD storage.................................................................................................. 14
5.1 Power options
All BC820 series cameras support 12 Vdc and 24 Vac via terminal block. The BC820/
BC820MP5 and BC820H1 models also support Power over Ethernet (PoE).
3-pin power connector
5.2 Power the camera
To power the BC820 camera
1 Connect the leads from the 12 Vdc power supply (included) or 24 Vac power supply (not
included) to the terminal block in accordance with the connection assignments on the
rear panel of the camera.
2 If used, connect the GND wire to the third pin of the terminal block.
3 Plug the power supply into a power outlet.
Warning: To avoid electric shock, connect the power jack to the IP camera before plugging
the power jack into the socket.
Connection 24 Vac Assignment 12 Vdc Assignment
+Power-1 Power
Earth GND Reserved
—Power-2 GND
24 Vac / 12 Vdc connection assignments
13

Power over Ethernet (PoE)
The BC820/BC820MP5 and the BC820H1 can also use Power over Ethernet (PoE), which
requires that IEEE 802.3AF Power Sourcing Equipment (PSE) is available on the network. The
use of Cat 5 Ethernet cable is recommended for network connection. For the best transmission
quality, limit the cable length to no more than 100 metres.
Connect one end of the Ethernet cable to the camera's RJ-45 connector and the other end of
the cable to the IEEE 802.3AF network switch or PC. The BC820 consumes 3.8 W of power.
Note: In some cases, you may need to use an Ethernet crossover cable when directly
connecting the BC820 cameras to a PC.
5.3 Alarm application
The camera equips one relay input and one relay output for alarm application. Refer to the
alarm pin definitions below to connect alarm devices to the IP camera as necessary.
The RS-485 connector is the interface for connecting with the camera's PTZ positioning
system.
Pin definitions Equivalent Circuits Output specification
● Solid state relay MOSFET output
● Absolute MAX Voltage:
300 V AC/DC
● ON-Resistance: MAX 30 Ω
● MAX Load Current: 100 mA
● OFF Leakage Current: 1 uA
7. D+
6. D-
5. GND
4. Input-
3. Input+
2. Output-
1. Output+
Alarm/RS-485 definitions
5.4 Audio
The BC820 cameras support two-way audio transmission in full duplex, half duplex, and
simplex modes in a variety of audio qualities.
5.5 Micro SD storage
The BC820 cameras support a Micro SD card for storing motion detect and scheduled
recordings. Users can also format the SD card and implement automatic recording cleanup
through the setting page on the browser interface of the camera.
Cable connection
14

6 Mount the camera and the lens
The BC820 series camera requires a lens and a mount, usually a wall bracket.
In This Chapter
6.1 Mount the camera.................................................................................................15
6.2 Mount the lens......................................................................................................15
6.1 Mount the camera
The BC820 can be installed directly on a wall or ceiling, provided the surface has sufficient
strength to support the camera. The mounting bracket screws directly into the screw hole
shown in the figure below. No tools are required. There are screw holes on both the top and
bottom of the camera.
BC820 with screw hole
6.2 Mount the lens
The BC820 and BC820MP5 models support C- and CS-lens mounting, detailed in this section.
Note: The BC820H1 camera has an integrated lens and therefore these instructions do not
apply.
To mount a CS-Mount lens
1 Remove the box camera's CCD cover.
2 Attach the lens to the camera (see figure below).
To mount a C-Mount lens
1 Remove the box camera’s CCD cover
2 Attach the supplied C/CS mount adapter to the camera as shown below.
3 Screw the lens onto the C/CS mount adapter.
4 Check for proper back-focus and adjust as necessary using supplied wrench.
15

C/CS mount adapter Attached lens
Mount the camera and the lens
16

Appendix: Technical specifications
This appendix provides the technical specifications of the BC820 series cameras.
In This Chapter
BC820 and BC820-SFP................................................................................................ 18
BC820MP5 and BC820MP5-SFP.....................................................................................21
BC820H1 and BC820H1-SFP........................................................................................ 24
17

BC820 and BC820-SFP
Camera
Image sensor 1/2.7" Progressive scan CMOS
Video standards PAL/NTSC
Output resolutions 1080p (1920x1080); 720p (1280x720); 1024x768;
800x600; D1 (720x576); CIF (352x288)
Effective pixels 1920(H) x 1080(V)
Digital slow shutter 1 - 1/15 s
Shutter speed 1 - 1/10000 s
Signal-to-noise ratio >40 dB
Analogue output BNC (1 Vpp)
Lens type C/CS-mount
Minimum scene
illumination
0.2 Lux colour; 0.02 lux (b/w)
Image control
Backlight compensation On/off
Wide dynamic range On/off
WDR value 69 dB
Contrast Manual
Brightness Manual
Saturation Manual
Hue Manual
Sharpness Manual
White balance Auto/manual
3D Noise reduction On/off
Iris control DC iris
Exposure Auto/manual
Day/night (IR-cut filter) Auto/on/off/smart
Digital zoom Yes
Appendix: Technical specifications
18

Functions
Privacy masks 5
Privacy mask type Colour
Video motion detection 10 user-defined; rectangular masking; adjustable
detection level, sensitivity, time interval
Language support English, French, German, Italian, Korean, Simplified
Chinese, Traditional Chinese, Russian
Event notification HTTP, FTP, SMTP
Tampering alarm On/off
Video
Number of video streams 4x H.264 or 3x H.264 + 1x MJPEG
Number of output
streams
Up to 20 (RTSP)
Compression
algorithm(s)
H.264 MP (ISO/IEC 14496-10), MJPEG
Encoder bit rate control Constant bit rate (CBR), Variable bit rate (VBR)
Output bit rate (per H.
264 stream)
Up to 8192 kbit/s
Total output data rate Up to 32 Mbit/s
Maximum streaming
capabilities
1 2 3 4
H.264
1080p30
H.264
D1@30
- -
H.264
1080p30
H.264
CIF@30
H.264
CIF@30
H.264
CIF@30
H.264
1080p15
H.264
1080p15
- -
H.264
1080p15
MJPEG
1080p15
- -
H.264
1080p15
H.264
720p30
H.264
D1@30
-
H.264
1080p15
H.264
720p15
H.264
720p15
H.264
D1@30
H.264
1080p15
H.264
D1@30
H.264
D1@30
H.264
D1@30
H.264
720p30
H.264
720p30
H.264
D1@30
-
MJPEG
1080p30
---
Audio
Two-way audio G.711, 8 kHz, A-law, μ-law, 64 kbit/s; G.726, 8 kHz, 40
kbit/s
Appendix: Technical specifications
19

Data
Serial port RS-485 2-wire
Protocols Pelco D, Pelco D
Contact closures
Input 5 V 10 kΩ pull-up
Output Photo relay output 300 Vdc/ac
Reactions 4-pin terminal block, 4-pin terminal block
Storage
Storage options Micro SD card, 64 GB
Network
Interface(s) 10/100 Ethernet RJ-45)
Protocols IPv4/v6, TCP/IP, UDP, RTP, RTSP, HTTP, HTTPS, ICMP,
FTP, SMTP, DHCP, PPPoE, UPnP, IGMP, SNMP, IEEE
802.1x, QoS, ONVIF
Password levels User and administrator
Supported browsers Internet Explorer (6.0+), Chrome, Firefox, Safari
User accounts 20
Powering
Power consumption 4 W
Power
BC820 12 Vdc / 24 Vac / Power over Ethernet (PoE)
BC820-SFP 12 Vdc / 24 Vac
Power connector Terminal block
Environmental
Operating temperature -10 °C to +50 °C (+14 °F to +122 °F)
Relative humidity 10% to 90%, no condensation
Mechanical
Dimensions (h x w x d) 126 x 76 x 53 mm (without lens)
Weight 330 g (0.73 lbs)
Colour Black/Grey
Note: Weight and dimensions are approximate. All specifications are subject to change
without notice.
Appendix: Technical specifications
20