Siqura PD1103Z2-E User manual

Finalise / SD card / Reset button
© Siqura B.V. 2017
Version 1.1 (160407-1.1)
pd1103z2e QSG (MW10)
Mount
Unpack
Assemble & Fasten
Use DHCP server
Connect
Note: Subject to modification. Actual product and accessories may differ in appearance.
DHCP
Network s witch IP = 10.x.y.z
IP = 10.x.y.z
DHCP:
IP = 10.x.y.z
Note: For mounting instructions for wall, pole, and ceiling mounts see respective manuals.
2
1
PD1103Z2-E
3 MP Intelligent IP outdoor PTZ camera with IR
Quick Start Guide
3
2
4
3
2
5
4
3
2
6
5
4
3
2
7
6
8
7
9
6
5
4
3
2
10
65
43
2
11
10
65
43
2
Remove transport tape and protection foil.
12*
13
10
65
43
2
14**
*Micro SD Card: µSDHC or µSDXC ≤128GB
**Reset button: Press and hold for 10 sec. when powering on or rebooting.
Warning: Restores factory-default settings, including IP address, user name and password!
Find additional manuals, the datasheet,
the EU Declaration of Conformity and the
latest firmware for this product at:
http://www.tkhsecurity.com/support-files
http://www.tkhsecurity.com
http://www.tkhsecurity-usa.com

Set password
View live video / PTZ
Use fixed IP address
Install Device Manager (optional)
Change IP address via Device Manager
Open web interface via Device Manager
Note: Use Device Manager (see next) to discover the camera on the network.
DHCP
Network switch IP = 192.168.1.x
IP = 192.168.1.x
DHCP:
30 s
2 ~ 253
1
2
3
1 2
ZoomPan/Tilt
Show/Hide
PTZ pane
Focus
Iris
Presets Patrols
Patterns
Auxiliary focus
(push to focus)
1
2
3
Important: 1103 series cameras require Device Manager version 1.8.1 or later.
Replace an existing, older installation of this tool on your PC, if necessary.
Administrator / End User
Set a strong password!
qwerty1234
x6W@oM0a!9#F
Note: For information about user accounts and passwords, see User Manual.