SIRETTA ZEST SERIES User manual

ZEST Series
2G/3G Modem Starter Kit
Quick Start Guide
Rev 1.3

Whats in the Box?
As standard, the ZEST starter kit comes with the following*:
»ZEST series modem
»Power supply
»Mike 1A antenna
»RS232 male to USB cable
»Quick start guide
NOTE - The ZEST modem requires a data enabled SIM card to work. The unit is supplied
without a SIM, please acquire a SIM from a suitable SIM provider - please note Three SIM cards
will not work with the ZEST-N-GPRS.
*If you have purchased the ZEST as a standalone modem, you will need to purchase the other
accessories separately from www.siretta.co.uk

Setting up the ZEST
Step 1. Insert a SIM card fully into the SIM slot. Once the SIM card has been correctly
inserted, a click will be heard.
SIM
Step 2. Screw the antenna*onto the ZEST. Twist the antenna connector clock-wise
until the antenna is rmly connected.

Step 3. Using the supplied RS232 to USB cable, connect the RS232 male connector
into the RS232 port on the ZEST. Connect the USB connector (other end of the cable)
into a USB port on your PC.
Step 4. Open ‘HyperTerminal’ on your PC. You will be requested to enter the number
of the COM port your are using to communicate between the ZEST and PC. Upon
request, ensure the following information is inserted:
»Bits Per Second: 115200
»Data Bits: 8
»Parity: None
»Stop Bit: 1
»Flow Control: Hardware
RS232 to USB
cable

Step 5. Plug the power supply*into the ZEST. Ensure the mains supply is plugged
into a power source and switched on. The green LED on the ZEST will light up
continuously**, this indicates that power has been supplied. See table 1 below for
LED indication.
*The power supply used in this drawing may be different to the one supplied, however the
application process of the power supply is the same.
**If this step fails, please try again. If it fails a second time, please contact your Siretta
representative or call us on [phone].
Table 2. LED status
Name Colour Status Description
POWER Green ON ZEST is powered on
POWER Green OFF ZEST is powered off

Step 6. In the ‘Hyperterminal’ command window, type in the command:
AT<cr>
The command window will respond with:
OK
Your ZEST is now connected and ready to start communication.
Mounting the ZEST
The ZEST has an integrated DIN rail mount housing which allows the unit to connect
on to the standard rail widely used for mounting industrial control equipment inside
equipment racks. This has been adopted as a European (EN) and International (ISO)
Standard.
Hook the bottom modem DIN rail clip
onto the bottom of the DIN rail
Push modem 45° until the top DIN rail
clip locks onto the top of DIN rail
1
1
2
1:1 @ A3 Sheet Size
A B C D E F G H I
7
6
5
4
3
I H G F E D C B
2
A
1
AMENDMENTS
JOB NUMBER
Concept
DRAWING TITLE
STATUS
PROJECT INFO
UK
COPYRIGHT WARNING
These drawings and designs remain
the property of Sequoia Technology
Group. Any unauthorised use will
render the offender liable for damages.
ALL DIMENSIONS ARE IN Millimeters UNLESS OTHERWISE
STATED
SA11214
4.0
Complete assembly
Robustel Enclosure
Mounting
Siretta
06/02/2014
B.Hulman
DRAWING: X:\Sequoia Design\Siretta\Robustel Module\ Robustel Assembly
MODEL: X:\Sequoia Design\Siretta\Robustel Module\ Robustel Assembly
DESIGNER
26/08/2014
ISSUE DATE
DO NOT SCALE OFF DRAWING
EMAIL [email protected] FOR DXFS OR OTHER
SCALABLE FILES.
Page No: 08 /08
GENERAL NOTES:
PART NUMBER
REV
SCALE
4.0_Updated colour and added silk
screen_28/03/14_BH
3.0_Adjusted to suit findings from 3D
print prototypes. Added
logo._12/03/14_BH
2.0_Revised as per drawings supplied by
supplier_03/03/14_BH
1.0_Preliminary issue_07/02/14_BH
2

Further Information
For more information when using your ZEST, a range of hardware and software
manuals are available to download. You can request these from your Siretta
representative, alternatively these can be download from www.siretta.co.uk
1

Basingstoke Road
Spencers Wood
Reading
Berkshire
RG7 1PW
United Kingdom
Rev 1.3
sales
fax
accounts
email
Company No. 08405712
VAT Registration No. GB163 04 0349
A member of the Olancha Group Ltd
[phone]
[phone]
[phone]
[email protected]
www.siretta.co.uk