Full Manual MD-270/WL-355
- 10 -
4Getting Started
Before beginning the installation, please read through the installation pro edure
des ribed in this manual.
Installation Requirements
To begin using the MD-270/WL-355 TV Media Player, you will need:
• A television set (TV) with either a HDMI onne tion or available AV omposite
able onne tions for audio and video.
• The MD-270/WL-355 TV Media Player onne ted to the TV.
• A USB hard disk or USB flash memory devi e with a USB 2.0 able ontaining
media files (video, musi and digital photos).
Installation Procedure
The MD-270/WL-355 TV Media Player installation pro edure is summarized below:
1. Transfer digital video, digital photo and digital musi or audio files to a USB
external hard disk.
2. Conne t the TV Media Player to a TV, stereo amplifier or entertainment system.
3. Conne t the power to the TV Media Player.
4. Conne t the USB hard disk ontaining stored digital media to the TV Media Player
and power on the hard disk.
5. Conne t the Ethernet able to the Ethernet port (if the devi e is used on a lo al
network).
Transfer Media files to USB storage
Transfer your favourite ontent, like your musi , videos and photos, from your
omputer to your external USB drive. You don’t need to put these files in any order,
the TV Media Player will sort them out in the right ategories for Musi , Videos and
Photos.
Connecting the MD-270/WL-355
Below is a summary of the audio and video onne tion options. The pages that follow
have illustrations of the various onne tion types.
Video Connections
To onne t video to your TV, there are two options. If your TV or home entertainment
system is equipped with a HDMI port, use a HDMI able for the video and audio
onne tion. Alternatively, the media player video output an be supplied through the
omposite video onne tion (yellow oloured ja k). Both the omposite and HDMI
onne tions an be used simultaneously, however optimizing the video settings for
HDMI (su h as the aspe t ratio), might affe t the appearan e of the omposite video
output.
