SJCAM C200 User manual

SJCAM C200
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch

2
English
3 –21
Čeština
22 –40
Slovenčina
41 –59
Magyar
60 –78
Deutsch
79 –97

3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention to
the safety instructions. If you have any questions or comments about the device, please
contact the customer line.
✉www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

4
Safety Guidelines
1. Handle this product with care due to its high-precision nature; refrain from dropping or
subjecting it to impacts.
2. Keep this product away from strong magnetic fields generated by objects like magnets
or motors. Also, prevent its proximity to devices emitting potent radio waves. This
precaution safeguards against potential product malfunctions, failures, and the
resulting image/audio damage.
3. Protect this product from exposure to high temperatures and direct sunlight to
maintain its performance and longevity.
4. Opt for a TF card from a reputable brand to ensure proper functionality. Non-regular
brand cards may not guarantee normal operation.
5. Avoid bringing the TF card near items with strong magnetic fields to prevent data loss
stored within the card.
6. Refrain from disassembling or attempting to burn the battery to prevent leakage or
explosions.
7. Store this product in a cool, dry, and dust-free environment to prolong its usability.
Kindly select an authorized collection facility to properly recycle either this product or its
battery. Please refrain from discarding them in regular waste bins.

5
Diagram
1. Up Button/M Button
2. Up Button/M Button
3. Down Button/Wi-Fi Button
4. Down Button/Wi-Fi Button
5. Screen
6. Speaker
7. Lens
8. On/Off Button, OK Button
9. Reset Button
10. Memory Card Slot
11. USB Interface
12. Microphone

6
Packaging
Note: The remote control and external microphone are not included in the standard list
and need to be purchased additionally.
1× Camera
1× Waterproof Case
1× Support Base
1× Frame Bracket
1× Back Clip
2× 3M Stickers
2× Helmet Base
1× USB Cable
1× External
Microphone
(Additional purchase
required)
1× Remote Control
(Additional purchase
required)
1× Wipe Cloth
1× Manual

7
Specifications
Main Chip
NT96660
Sensor
Sony IMX335
Gyro Image Stabilization
Supported
Battery
1200mAh
Lens Angle of View
154°
Aperture
2,0
Pixels
16 million
Screen
3,27 Centimeters
Wi-Fi
2,4GHz
Remote Control
Supported
Encoding Format
H.264
TV System
NTSC/PAL
Light Source Frequency
50Hz/60Hz
Video Format
MP4
Picture Format
JPG
Video Resolution
4K (2880×2160) 24FPS, 2K (2560×1440)
30FPS, 1080P (1920×1080) 60/30FPS,
720P (1280×720) 120/60/30FPS,
VGA (640×480) 240FPS
Photo Resolution
16M (4608×3456), 12M (4032×3024), 10M
(3648×2736), 8M (3264×2448), 5M
(2592×1944), 3M (2048×1536), VGA
(640×480)
USB Interface
USB Type-C
Power Input
5V 2A
Body Waterproof
5 Meters
Waterproof Using the Waterproof
Case
40 Meters
Working Temperature
-10°C to 45°C
Dimension
68×34×26,5 Millimeters
Supported Languages
English, French, German, Spanish, Italian,
Portuguese, Simplified Chinese, Japanese,
Traditional Chinese, Polish, Russian,
Hungarian, Czech, Slovak, Finnish, Danish,
Dutch, Turkish, Hebrew, Thai

8
Charging
Charging Interface
USB Type-C
Input Voltage
5V
Input Current
2A
Downloading the APP
Scan the code and download the APP.
This product offers the convenience of seamless connectivity to a wide range of smart
devices, including smartphones and tablets that operate on both Android and iOS systems.
Whether you're an Android enthusiast or an iOS aficionado, this feature ensures that you
can effortlessly link your preferred device to the product, enhancing your user experience.

9
Camera Buttons Description
1. On/Off button/OK button: Hold the button for a duration of 3 seconds to power the
device on or off. A brief press serves to capture photos/videos or confirm actions.
2. Up button/M button: With a quick single press, you can zoom in or effortlessly
navigate upwards through the menu. Engaging in a 2 second long press unlocks the
capability to alternate between shooting modes or the settings menu, adapting your
experience to your preference.
3. Down button/Wi-Fi button: Similarly, a brief single press of the down button allows
you to zoom out or conveniently scroll down the menu. To control the WIFI
functionality, simply press and hold for 2 seconds to activate or deactivate the feature,
providing you with streamlined wireless control.

10
Remote Control Buttons Description
1. Power Down Button: Utilize this button to switch off the camera.
2. Continuous Capture Button: Enable continuous shooting mode with this button.
3. Photo Capture Button: Press this button to capture a photograph.
4. Wi-Fi Button: Employ the Wi-Fi button to toggle the Wi-Fi functionality on or off.
5. Recording Control Button: Initiate or conclude recording sessions by engaging this
button.
Turning Wi-Fi On and Off
Upon activating the device, press and hold the Wi-Fi button for a span of 2 seconds.
Subsequently, the camera screen will promptly exhibit the designated Wi-Fi network name
and corresponding password. For deactivating the Wi-Fi, simply perform a prolonged 2
second press of the Wi-Fi button.
Wi-Fi Name
C200**********
Wi-Fi Initial Password
12345678

11
User’s Guide
Capturing Videos
Upon powering on, seamlessly access the video recording function, enabling you to initiate
video capture effortlessly with a simple press of the recording button. Note: The camera
retains the last selected mode even when powered off and on again, ensuring a seamless
continuation in the desired mode.
Snapping Shots
Once the camera is activated, engage by pressing and holding the M button for a duration
of 2 seconds (see Figure 1). This action seamlessly transitions the camera to photo mode.
To capture a photo, execute a quick press of the OK button (see Figure 2).
Playback
Upon activating the camera, hold down the M button for a duration of 2 seconds (refer to
Figure 1) to seamlessly transition into the playback mode. Employ the up or down button
to navigate and select the desired video or photo for playback. Once your selection is
made, press the OK button (depicted in Figure 2) to initiate playback.
Figure 1
Figure 2

12
Car Mode Activation
To activate the Car Mode feature, initiate the process by pressing and holding the power
button for a duration of 3 seconds. Following the camera's activation, seamlessly navigate
to the setting interface by pressing and holding the M button for 2 seconds (depicted in
Figure 1). Proceed to confirm your selection by pressing the OK button, thus granting
access to the recording settings. Within this menu, navigate to the "car mode" option and
confirm the selection with another press of the OK button. Subsequently, delve into the
Car Mode switch by pressing the down button, choosing "On" (as indicated in Figure 3).
Concluding these steps, exit the setting interface by pressing and holding the M button for
2 seconds and confirming the exit with the OK button.
Upon exiting, you'll find yourself in the Car Mode, ready to initiate recording. Press the OK
button to commence recording in Car Mode.
Helpful Notes:
1. To utilize the Car Mode, position the camera upside down and activate the screen
rotation option (accessible in the system setting menu).
2. Once connected to the car power adapter, the camera will automatically start
recording. Upon disconnecting the power, recording will cease within approximately 10
seconds.
Configuration Adjustment
Upon powering on the camera, seamlessly navigate to the configuration menu by pressing
and holding the M button for a duration of 2 seconds (illustrated in Figure 1). To access the
settings, confirm your selection by pressing the OK button (depicted in Figure 4).
Figure 3
Figure 4

13
Customizing Recording Preferences
Once the camera is powered on, initiate the recording settings by holding down the M
button for a span of 2 seconds (refer to Figure 1). This action smoothly transitions you into
the settings interface. Confirm your entry into this interface by pressing the OK button (as
shown in Figure 3).
To tailor your preferences, browse through the available menus by utilizing the up or down
keys. Upon selecting your desired menu, confirm your choice by pressing the OK button.
Recording Settings Menu
Resolution
2880×2160 24FPS,1920×1080 30FPS,
1280×720 120FPS,1280×720 30FPS,
2560×1440 30FPS,1920×1080 60FPS,
1280×720 60FPS, 640×480 240FPS
Loop Recording
Off, 3 minutes, 5 minutes, 10 minutes Off,
On
Car Mode
Off, On
Interval Recording
Off, 1 second, 2 seconds, 5 seconds
Slow Recording
Off, -2X, -4X, -8X
Video/Photo Mode
Off, 5 seconds, 10 seconds, 30 seconds, 1
minute
Vertical Video
Off, On
Pre-recording
Off, On
Delay Recording
Off, 5 seconds, 10 seconds, 20 seconds, 30
seconds
Gyro Anti-shake
Off, On
Recording
Off, On
Volume Adjustment
1, 2, 3, 4, 5, 6, 7, 8
Date Label
Off, On
Logo Watermark
Off, On
Stream
High, Medium, Low
White Balance
Auto, Daylight, Cloudy, Tungsten Light,
Fluorescent Light, Underwater Mode
Color
Normal, Black and White, Retro, Warm
Color, Cool Color
Exposure Compensation
+2.0, +5/3, +4/3, +1.0, +2/3, +1/3, +0.0,
-1/3, -2/3, -1.0, -4/3, -5/3, -2.0

14
Customizing Photo Preferences
Upon activating the camera, access the photo settings by
holding down the M button for a duration of 2 seconds
(depicted in Figure 1). This will smoothly transition you into
the settings function. Confirm your entry by pressing the OK
button.
For further photo adjustments, perform a prolonged 2-second
press of the M button once more to transition into the camera
settings function (as shown in Figure 5). To tailor your
preferences, navigate through the available menus using the
up or down keys. Once you've selected your desired menu,
solidify your choice by pressing the OK button.
Photo Settings Menu
Face Recognition
Off, On, Auto photo (>=1 Face), Auto
photo (>=2 Faces), Auto photo (>=3
Faces), Auto photo (>=4 Faces), Auto
photo (>=5 Faces), Auto photo (>=6
Faces), Auto camera (>=7Faces), Auto
camera (>=8Faces)
Photo Size
16M 4608×3456, 10M 3648×2736, 5M
2592 ×1944, VGA 640×480, 12M
4032×3024, 8M 3264×2448, 3M
2048×1536
Time-Lapse Capture
Off, 3 seconds, 5 seconds, 10 seconds
Interval Capture Time
Off, 3 seconds timer, 5 seconds timer, 10
seconds timer, 20 seconds timer
Continuous Capture
Off, 3 shots, 5 shots, 10 shots
Image Quality
High, Standard, Economical
White Balance
High quality, Standard, Economical Auto,
Daylight, Cloudy, Tungsten Light,
Fluorescent Light, Underwater Mode
Color
Normal, Black and White, Retro, Warm
Color, Cool Color
Exposure
+2.0, +5/3, +4/3, +1.0, +2/3, +1/3, +0.0,
-1/3, -2/3, -1.0, -4/3,- 5/3, -2.0
Date Label
Off, Date, Date/Time
Figure 5

15
System Settings Customization
Upon powering on the camera, access the comprehensive system settings by holding
down the M button for a duration of 2 seconds (as depicted in Figure 1). This seamless
action effortlessly takes you to the setting function, which you can confirm entry by
pressing the OK button.
For further refinement of system preferences, initiate another 2-second press of the M
button to transition into the system setting function (illustrated in Figure 4). Delve into the
menus by using the up or down keys to select your desired option, and then solidify your
choice by pressing the OK button to confirm.
System Settings Menu
Language Settings
English, French, German, Spanish, Italian,
Portuguese, Simplified Chinese, Japanese,
Traditional Chinese, Polish, Russian,
Hungarian, Czech, Slovak, Finnish, Danish,
Dutch, Turkish, Hebrew, Thai
Quick Turn On
Off, On
Rotation
Off, On
Screen Saver
Off, 30 seconds, 1 minute, 3 minutes, 5
minutes
Automatic Turn Off
Off, 3 minutes, 5 minutes, 10 minutes
Format
Cancel, Confirm
Date/Time
YY/MM/DD (Note: After setting the
date/time, press and hold the M button for
2 seconds to exit)
TV System
NTSC, PAL
Fast Recording
Off, On
Quick Photo
Off, On
Voice Broadcast
Off, On
Button Sound
Off, On
Wi-Fi SSID
A-Z, a-z, 0-9 and other text modifications
Wi-Fi Password
A-Z, a-z, 0-9 and other text modifications
Light Source Frequency
50Hz, 60Hz
Remote Control
Off, On, Remote control matching
Default Settings
Cancel, Confirm
Version
Check the information about version

16
Exit Settings
Engage the X icon by pressing and holding the M button for a duration of 2 seconds. Within
this mode, navigate through the menu options, and conclude the process by pressing the
OK button, as indicated by Figure 6, to exit the settings interface.
Figure 6

17
Waterproof Case Diagram
1. Lens
2. Clip
3. On/Off Button/Ok Button
4. Screen
5. Waterproof Base Interface

18
Waterproof Case Buttons Description
1. On/Off/Ok Button: A 3 second long press effectively powers the device on or off,
while a quick, short press is ideal for capturing photos/videos or confirming actions.
2. Up Button/M Button: A single brief press effortlessly zooms in or upwardly scrolls
through the menu, and an extended 2 second press seamlessly toggles between
shooting modes or navigates to the settings menu.
3. Down Button/Wi-Fi Button: A quick, momentary press conveniently zooms out the
viewfinder or facilitates downward menu scrolling. Alternatively, a 2 second prolonged
press activates or deactivates the WIFI feature.

19
Frequently Asked Questions
1. Facing Difficulty in Turning On? Should the camera appear unresponsive, it's likely
running low on battery. Swiftly resolve this by initiating a charging session.
2. What kind of power adapter should be used to charge the camera? For
efficient charging, employ a 5V 2A power adapter. Alternatively, leverage the
convenience of a computer's USB interface for charging purposes.
3. Is it normal for the camera to get hot? It's common for the camera to generate a
moderate amount of heat during operation, signifying its healthy functionality. Within
the acceptable temperature range of -10°C to 45°C, the camera performs optimally.
4. Interpreting Indicator Lights:
Steady blue light: Recording mode
Flashing blue light: Video recording in progress
Constant red light: Photo mode engaged
Flashing red light: Photo capture ongoing
Steady red light: Charging underway
Note: Product features may evolve with upgrades or updates. To ensure accurate
information, consult the current product specifications.
For any assistance or inquiries regarding after-sales service, don't hesitate to reach out to
SJCAM's dedicated customer service team. You can connect with us via technical support
email at [e-mail]. Explore the comprehensive SJCAM after-sales service
website at www.sjcam.com for further support.
Manufacturer: Shenzhen Zhencheng Technology Co., Ltd. We are committed to providing
you with the utmost support for your camera experience.

20
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
Using the product for any purpose other than that for which the product is intended or
failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g., during transport, cleaning
by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries,
etc.).
Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic
discharge voltage (including lightning), faulty supply or input voltage and inappropriate
polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.