SJCAM M10 Series User manual

Quick Start Guide
Safety Warnings
Your battery and camera can only be disposed of in recycling facilities.
Please look for recycling drop off points when you need to throw it away.
Thank you for purchasing an original SJCAM action camera. Please read this Quick Start Guide thoroughly
before using it. For a more detailed version of this manual, please check out: SJCamHD.com/Manual.
1.While this is an action camera, care must be taken to keep it working properly.
2. Do not expose the unit to strong magnetic fields, such as magnets, electrical motors,
and machinery that use strong electromagnetic or radio waves.
3. Do not leave your M10 in hot environments or under direct sunlight for long periods.
4.All electronic equipment generate heat during operation.
If the camera’s body is too hot to touch, turn the unit off and let it cool down before
using it again.
5. Choose a branded microSD card to avoid performance issues.
Non-branded cards may cause erratic camera behavior.
6. Do not place your microSD cards near strong magnetic fields to avoid data loss.
7.Always remove the battery when using the camera as a dashcam to avoid overcharging.
8.Always avoid extended periods of battery charging. Keep it away from children and pets
while charging to avoid accidents.
9. Store the camera in a cool, dry, and dust-free place.

WVGA (640*480) 60fps

Power supply
43x44x49 mm 43x44x49 mm 43x44x49 mm

Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Waterproof case
Clip
Helmet base
Switch support 1
Switch support 2
Switch support 3
Bicycle mount
Fixed base
Adapter
Data / Charging cable
3M sticker
Lens cloth
Sticker
Manual
Waterproof case touch door
Base
Band

User instructions
1. Inserting a microSD card
Insert the card all the way in until it clicks into place. Only use a branded microSD card and format it on a
computer prior to use. Non-branded cards may cause erratic camera performance.
2. Installing and removing battery
A. Push the battery cover tab to open it.
B. Install battery into camera as indicated by +/- symbols and direction of arrows marked on battery and
push it all the way in.
C. Battery charge indicator: please refer to pictures.
D. Remove Battery: open cover to take battery out.
3. Charging
A. Charging can be done by connecting the camera to a computer, or using a power adaptor or a car
charger.
B.The M10 can record video while charging (select Car Mode in Menu）
C.The M10 can be charged even when it is powered off.
4. Switching camera on and o
A. Press and hold power button for 3 to 5 seconds to turn it on / off.
5. Car camera mode
A. Go to the video menu and select car mode to record.
B. Camera will switch on automatically when the car starts while connected to a car charger.