Skypatrol SP9600 User manual

SP9600 User Manual
1
Skypatrol SP9600
User Manual v2.0
Copyright © 2017 Skypatrol

SP9600 User Manual
2
Document History
File name
SP9600 user manual
Created By
Hanson
Product
SP9600
Creation date
2016-01-15
Version
V2.0
Update date
2016-02-24
Status
Release
Reviewed By
Update History
NO.
Updates content

SP9600 User Manual
3
Attention
All wireless data transferring trackers produce interference that may affect other
trackers which are placed nearby.
The tracker may be connected only by qualified individuals.
The tracker must be firmly fastened in the predefined location.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
Instructions Of Safety
By following these requirements and recommendations you will avoid dangerous
situations. You must read these instructions carefully and follow the strictly before
operating the tracker!
Please install the batteries carefully according this user manual indicates to avoid short
circuit that may causes malfunction of tracker.
Before usage, the tracker should be placed so that its LED indicators are visible, which
show what status of operation the tracker is in.
When connecting the connection cables to the vehicle, the appropriate jumpers of the
power supply of the vehicle are recommended to be disconnected.
Before dismounting the tracker from the vehicle, the connection must be disconnected.
Copyright and Disclaimer
The User Manual may be changed without notice.
Without prior written approval of Skypatrol LLC., this User Manual, or any part thereof,
may not be reproduced for any purpose whatsoever, or transmitted in any form, either
electronically or mechanically, including photocopying and recording.
Skypatrol LLC. shall not be liable for direct, indirect, special, incidental, or consequential
damages (including but not limited to economic losses, personal injuries and loss of
assets and property) caused by the use, inability, or illegality to use the product or
documentation.

SP9600 User Manual
4
CONTENTS
1. SP9600 introduction ..................................................................................................5
2. SP9600 Specifications ................................................................................................6
3. Product overview.......................................................................................................7
3.1 Check Part List..................................................................................................7
3.2 Product indicator diagram ...............................................................................9
3.3 Interface Definition........................................................................................10
3.4 LED indicator behavior...................................................................................10
4. Device installing way................................................................................................12
4.1 Dismount........................................................................................................12
4.2 Configure device ............................................................................................15
4.3 Install magnet ................................................................................................16
4.4 Connect battery packet..................................................................................17
4.5 Dismantle battery packet...............................................................................17
4.6 Charging device..............................................................................................18
5. Common commands................................................................................................19
5.1 Set User Phone Number ................................................................................19
5.2 Set User Password .........................................................................................20
5.3 Set ACK...........................................................................................................21
5.4 Set Position Report Interval To User..............................................................22
5.5 Set SIM Card APN...........................................................................................23
5.6 Set GPRS Main Server ....................................................................................24

SP9600 User Manual
5
5.7 Set GPRS Backup Server.................................................................................25
5.8 Set Position Report Interval To GRPS Server .................................................27
5.9 Set device dismantled alarm..........................................................................28
5.10 Set product firmware upgrade ...................................................................29
6. User Combine Command.........................................................................................30
6.1 Command Error SMS......................................................................................30
6.2 Command Success SMS .................................................................................30
7. SMS Report Explanation ..........................................................................................31
7.1 “W” Mode Report ..........................................................................................31
7.2 “T” Mode GPS Report ...................................................................................31
7.3 “T” Mode LBS Report .....................................................................................32

SP9600 User Manual
6
1. SP9600 introduction
SP9600 is a GPS tracker with powerful function, which is used for assets management
mainly. It‟s a low power consumption, high level of waterproof products. It has build-in
high capacity rechargeable lithium battery, allowing to use external multilevel extension
battery packet. The device has abundant function, support Bluetooth configuration, APP
to browser drive trajectory and other Bluetooth accessories control functions. Support
device tamper detection. Support movement, stillness, harsh brake, collision and
turnover detection etc.
•Main and backup GPRS server, SMS server, Bluetooth server and report way of
dual users can be configured flexibly
•Set time, distance, angle , event and dynamic upload
•Flexibly configure single event, comb events
•28 polygons and 128 Geo-fence, can relate to speed, time and level factor
•Read ,import the configuration command file, and switch to different configuration
in different scene
•Local and remote upgrade
•Can configure white list of position requesting information Anti-Jamming
•Automatic time calibration and time zone, daylight saving time setting
•Private hour
•Three axis acceleration sensor to achieve movement, emergency driving behavior
(harsh brake, accelerate, turn), accident (turnover collision) detection.
•Overspeed monitoring, mileage statistics, engine running time statistics
•Towing and idling monitoring
•Power supply monitoring, low power consumption and multistage power supply
management
•Remote configuration

SP9600 User Manual
7
2. SP9600 Specifications
Physical
Dimensions
96（L）*50（W）*31.5（H）mm
Weight
140g (include Lithium battery )
Environment
Operating
temperature
-20℃～+50℃(include battery)
Storage temperature
-40℃～+85℃
Relative humidity
95% RH @ +30°C humidity
Waterproof and
dustproof
IP6-7
Dustproof: prevent outside thing
intrusion, and can completely
prevent dust. IP6
Waterproof: Short-term
immersion under atmospheric
pressure, when the shell
temporary immersion in the 1 m
deep water will not cause
harmful effects. IP-7
Shock/impact
MIL STD 810/ SAE J1455
USB
Normal 4Pin socket on PCB, space 1.25MM
CPU
ARM
EFM32GG330F512,QFN64-9x9 Silicon
Bluetooth
4.0
Power
External
Battery packet, AC adapter
Internal
Rechargeable 4000MAH lithium battery
Power
consumption
Work mode(GPS on,
GPRS on)
100mA
Sleep mode(GPS
off, GPRS off)
≤300uA
Deep sleep mode
≤100uA
Communication
Antenna
Build-in
2G model
BGS2-W
3G model
EHS-5
SIM card
Standard SIM card
GPS
Antenna
Build-in ceramic antenna
Model
Ublox
Channel
50
Sensitivity
-162 dbm
Precision
<2.5 m
Detector
Build-in detector
3D
sensor
Driving behavior(harsh turn,
accelerate brake, collision), shift
alarm
Vision
LED
4 LED
System/GPS/GSM/Power status
Note: Early production information

SP9600 User Manual
8
3. Product overview
3.1 Check Part List
Before starting, check and make sure the following items have been included with your
device. If anything is missing, please contact your supplier.
①Standard Part List
Main unit
Battery waterproof of port

SP9600 User Manual
9
②Optional Part List
USB cable IO cable
Charger Magnet
Screw battery packet
Bluetooth adapter

SP9600 User Manual
10
3.2 Product indicator diagram
Charging LED indicator
GPS LED indicator
System LED indicator
GSM LED indicator
Battery packet connector
or IO data connector
Light sensation area

SP9600 User Manual
11
3.3 Interface Definition
Interface definitions are as below.
Pin
Name
Definition
1
VCC
DC5V input, battery packet supply or
charger
to input
2
AD1
Battery packet detection
3
IN/OUT1
General bidirectional input/output
4
GND
Ground
3.4 LED indicator behavior

SP9600 User Manual
12
3.5 Features
IP67 rating which provides protection against temperature/dust/water spray
Bluetooth connectivity, for wireless configuration and periodical report.
Endurablebattery lifefor long term deployment, and external battery pack supported
Built-in 3 axis G-sensorfor motion detection
Light sensor for tracker removing alarm
GSM jamming detection
Dynamic report interval according topreset conditions(parking/roaming etc.)
Fixed distance and fixed angle cornering report
Flexible report packet size on demand
Hardware based Geo-fence supported up to 156for instant notification
OTA firmware upgrade supported

SP9600 User Manual
13
3.6 Supported event list
Tracker is capable to report below specific events instantly via GPRS/SMS channel
according to setting.
Note: Above events by default are disabled please enable them by configuration tool
if necessary or contact your distributor forfurther information regarding this topic.
4. Device installing way
4.1 Dismount
a) Open device cap “Unscrew it” b) Open the cap

SP9600 User Manual
14
c) Open Card slot d) Install SIM card
e) Close card slot
f) Be sure to plug in the power
line at first time use.
g) Connect USB cable and use
configuration tool to configure
device.
h) Screw cap on.

SP9600 User Manual
15
4.2 Configure device
a) Install device driver
Device driver file Gosafe-Cdc
b) Open the configuration tool
by double click “Configuration Tool”
Note: if there is an error or you are unable to open the file, please install
“Microsoft .NET Framework ”4.0 or latest version in your computer.
Software interface is as below.

SP9600 User Manual
16
c) Connect the device to your computer. Choose the correct serial port and
device mode, then click „connect‟.
d) Input your desired parameters and click „write‟ to write all of the data to device.
4.3 Install magnet
Use two screw to fix magnet.

SP9600 User Manual
17
4.4 Connect battery packet
a) Connect b) Close
c) Fasten
4.5 Dismantle battery packet
Use tweezers or other tools to insert and press down the point showed on the
picture, at the same time open the buckle to dismantle the battery packet.

SP9600 User Manual
18
4.6 Charging device
e) Charging.

SP9600 User Manual
19
5. Common commands
To set your cell phone number as User0 or User1. This will allow you to send SMS
commands to control and receive messages from the device.
5.1 Set User Phone Number
Command:
UNO command is set up to utilize 2 users phone numbers. Both users have the same
authorization. With the correct password, any phone number is able to use this
command. User0‟s factory default password is “1234”, User1‟s factory default
password is also “1234”.
Command format:
1.Set user0 phone number:
< User0 Password>,UNO0;<New phone number>
2.Set user1 phone number:
< User1 Password>,UNO1;<New phone number>
Parameter description:
<New phone number>: the length must be less than or equal 20 digitals. The
setting has two formats:
1. Domestic phone number: phone number without country code.
2. International phone number: phone number with country code. Add “+” before
the numbers.
Example:
Set user0 phone number:
1234,UNO0;[phone]
Or
1234,UNO0;13912345678

SP9600 User Manual
20
5.2 Set User Password
Command:
UPW command is used to set user command password. User0‟s factory default
password is “1234”. User1‟s factory default password is “1234”. Changing the factory
password upon first use is highly suggested.
Command format:
1.Set user0 password:
< User0 Password>,UPW0;<New Password>
2.Set user1 password:
< User1 Password>,UPW1;< New Password>
Parameter description:
< New Password>:Fix 4 digits, range is “0000 to 9999”
Example:
Set user0 password
1234,UPW0;5678
5.3 Set ACK
Command:
ACK command is used to set up UDP response mechanism switch Command format:
Disable UDP response: ACK;0
Data packing method is the same as before Enable UDP response: ACK;1
Data packing includes sequence number and ID Parameter description:
This function needs SVR command set as UDP mode to open a response.
Example:
Enable UDP mode and open a response
SVR;183.233.129.45;;6667;1;1
Enable new respond mechanism ACK;1
Configure the initial waiting reply time SVT;1800;15