Slendertone Connect Abs9 User manual

Slendertone Connect IM 5L_ML Book 26/05/2015 10:50 Page 2

Welcome to SLENDERTONE CONNECT ABS9
SLENDERTONE CONNECT ABS9is a breakthrough in interactive toning technology. Combining the toning power of a
SLENDERTONE Abdominal Toning System with the versatility of your smart device, this product revolutionises the whole
concept of home toning.
Download the SLENDERTONE CONNECT ABS9app, complete your profile details and register your controller to access the
full interactive experience. Here you will be given a recommended toning regime, designed to suit your specific
requirements, targets to achieve on a weekly basis and the chance to challenge yourself and even others to constantly
improve your results.
SLENDERTONE CONNECT ABS9has been ergonomically designed for use whenever it suits you. Very slimline and discreet, it
can be worn under your clothes for use just about whenever and wherever you want - relaxing at home, out for a walk
even at your desk at work.
Notes:
•You can start and operate a SLENDERTONE CONNECT ABS9session without a smart device by using the buttons on the
front of the controller.
•For the best results, we recommend that you do at least four training sessions per week.
Important
Ensure Compatibility
Before setting-up your SLENDERTONE CONNECT ABS9, you should ensure that your smart device is compatible with
this product. SLENDERTONE CONNECT ABS9uses Bluetooth®Smart wireless personal area network technology.
Your smart device must have this capability or it will not work with SLENDERTONE CONNECT ABS9.
For a complete list of smart devices compatible with SLENDERTONE CONNECT ABS9, please check our website
www.slendertone.com/compatibility
www.slendertone.com/compatibility
Controlling Your Toning Session
While generally you use your smart device to control your toning session, there may be times when your
smart device is unavailable, for example, when the battery is flat or it has been left out of range. To ensure
you can still safely control the toning session the buttons on the controller let you to adjust the intensity,
pause or turn off the stimulation. These built-in controls take precedence over the app controls.
2
Slendertone Connect IM 5L_ML Book 26/05/2015 10:50 Page 3

Indications, Contra-Indications, Warnings & Precautions
Your SLENDERTONE product is suitable for use by all healthy adults. However, as with other forms of exercise, some care
is needed when using it, so always follow the points below and read your user manual carefully before use. Some of
the points below are gender specific.
Indication for use:
SLENDERTONE CONNECT ABS9is intended for use by healthy persons to apply transcutaneous electrical muscle stimulation
(EMS) through skin contact GelPads for the following:
•Improvement of abdominal muscle tone.
•Strengthening of the abdominal muscles.
•Development of a firmer abdomen.
Contra-indications:
•Do not use if you have an electronic implant (e.g. cardiac pacemaker or defibrillator) or suffer from any other heart
problem.
•Do not use if you have any other form of abdominal implant. The safety of using electronic muscle stimulators over
abdominal implants has not been established.
• Do not use if you are pregnant. The safety of powered muscle stimulators for use during pregnancy has not been
established.
•Do not use if you suffer from cancer, epilepsy or are under medical supervision for cognitive dysfunction.
•Do not use in close proximity (e.g. 1m) to shortwave or microwave therapy equipment, as this may produce instability
in the controller’s output.
•Do not use if wearing the device necessitates placement over areas at which drugs/medicines are administered by
injection (short term or long term) e.g. hormone treatment.
•Simultaneous connection of a patient to high-frequency surgical equipment may result in burns at the site of the
GelPads and possible damage to the controller.
Warnings:
• The long-term effects of chronic electronic stimulation are unknown.
• The product should not be used while sleeping.
Please wait before using your SLENDERTONE CONNECT ABS9 until:
•At least six weeks after the birth of your baby (you must consult your doctor first).
•At least three months after having a caesarean section (you must consult your doctor first).
•One month after an IUD contraceptive device (e.g. coil) has been fitted.
•The heavy days of your period have finished.
3
English
Slendertone Connect IM 5L_ML Book 26/05/2015 10:50 Page 4

When applying the GelPads and belt, always remember...:
•To place the GelPads and belt ONLY on the abdomen, as indicated in this manual.
•Stimulation should not be applied across or through the head, directly on the eyes, covering the mouth, on the front
of the neck (especially the carotid sinus), on the chest and the upper back or crossing over the heart.
•Application of stimulation on or near the thorax may increase the risk of cardiac fibrillation.
•Avoid applying stimulation over or in proximity to cancerous lesions.
•Avoid any recent scars, broken or inflamed skin, areas of infection or susceptibility to acne, thrombosis or other
vascular problems (e.g. varicose veins), or any parts of the body where feeling is limited.
•Avoid areas of injury or restricted movement (e.g. fractures or sprains).
•Avoid placing the GelPads directly over metal implants.
Precautions:
Please read these precautions before using your SLENDERTONE CONNECT ABS9 product.
•Do not use SLENDERTONE CONNECT ABS9in or near water, including a bathtub, shower, hot tub or swimming pool.
• Caution should be used in the following:
- When there is a tendency to haemorrhage following acute trauma or fracture;
- Following recent surgical procedures when electronic stimulation may disrupt the healing process;
- Over areas of skin which lack normal sensation.
• Your SLENDERTONE product is not intended for medical use, for the treatment of any medical condition, nor for any
permanent physical changes.
Please get your doctor’s or physical therapist’s permission before using SLENDERTONE CONNECT ABS9 if:
•You wish to use the belt and have a bad back. You should also ensure the intensity is kept low.
•You have any serious illness or injury not mentioned in this guide.
• You have a tendency to bleed internally, such as following an injury or fracture.
•You take insulin for diabetes.
•You suffer from muscle or joint problems.
• You use the product as part of a rehabilitation program.
To reposition the belt or GelPads during a session:
•Always pause the programme currently running, unfasten the belt and then refasten it behind your back once the
position of the GelPads has been adjusted.
Contact your local careline (see page 6) if:
•Your product is not working correctly. Do not use it in the meantime.
•You experience any irritation, skin reaction, hypersensitivity or other adverse reaction. You should, however, note that
some reddening of the skin can appear under the GelPads during and for a short time after a session.
4
Slendertone Connect IM 5L_ML Book 26/05/2015 10:50 Page 5

Note:
•An effective treatment should not cause undue discomfort.
Important:
•Keep your product out of the reach of children.
•The studs and GelPads must not be connected to other objects.
•Do not use your SLENDERTONE CONNECT ABS9at the same time as any other device which transfers an electrical current
into the body (e.g. another muscle stimulator).
•Cease using the product if you are feeling light headed or faint. Consult your doctor if this happens.
•Do not switch the controller on until it has been correctly inserted into the holster on the belt (except when Pairing).
•Do not touch the GelPads or metal studs with your fingers while the controller is switched on.
•Do not use while driving, operating machinery or cycling.
•Keep GelPads and packaging out of reach of children, to avoid risk of choking.
•For hygiene reasons the belt and GelPads are for single person use only. Do not share your belt or GelPads with
anyone else.
•Do not over-exert yourself when using muscle stimulation. Any workout should not exceed your comfort level.
•Do not use if you are wearing a belly-button ring. Remove the ring before you begin a session.
•SLENDERTONE will not accept responsibility if the guidelines and instructions supplied with this product are not followed.
•Although compliant with applicable EMC requirements, this device may still interfere with more sensitive equipment,
please move away or switch off.
•Keep this device out of the reach of pets or pests.
Possible adverse reactions:
•A small number of isolated skin reactions have been reported by people using muscle stimulation devices,
including skin allergies, a prolonged reddening of the skin and acne.
•If allergic reactions last for several hours, you should stop using the product as this product may not be suitable for you.
•On very rare occasions, first-time users of EMS have reported feeling light-headed or faint. We recommend that
you use the product while seated until you become accustomed to the sensation. For first time users, muscle
stimulation can be an unusual sensation. We recommend that you begin with low stimulation intensities to familiarize
yourself with the sensation before progressing to higher stimulation intensities.
N.B. If you are in any doubt about using SLENDERTONE for any reason, please consult your doctor before use.
5
English
Slendertone Connect IM 5L_ML Book 26/05/2015 10:50 Page 6

What's In The Box
1. SLENDERTONE CONNECT ABS9 Belt:
Ergonomically designed belt for positioning the conductive
GelPads correctly. The belt fits waist sizes 24”-42”/ 61-
107cm. The controller is connected to the belt during use.
2. SLENDERTONE CONNECT ABS9 Controller:
The controller generates signals which are sent, via the belt
and GelPads, to your muscles to contract and relax them
rhythmically.
3. Adhesive GelPads:
These adhesive GelPads are placed on the belt before use.
When you wrap the belt around your waist, these GelPads
must be in contact with your skin so the stimulation can be
sent to your muscles.
4. USB Cable:
Connect the USB cable to the controller and to any USB charger or to
your PC to recharge the battery. It takes a minimum of 3 hours to charge fully.
5. Instructions:
A detailed guide to setting-up and using your SLENDERTONE CONNECT ABS9
Note: SLENDERTONE CONNECT ABS9 app:
You will also need to download the SLENDERTONE CONNECT ABS9app to access and run your personal toning
programmes.
Need Any Help?
If you require any assistance setting up your product or have any other queries, please call customer care or send us
an email:
UK: 0330 221 1278
Rep. of Ireland: 1890 92 33 88
USA / Canada: 1-800-551-2443
International: [phone]
Email: [email protected]
www.slendertone.com
1
5
4
3
2
6
Slendertone Connect IM 5L_ML Book 26/05/2015 10:50 Page 7

SLENDERTONE CONNECT ABS9Controller
The controller is connected to the belt and has a range of functions in the operation of your SLENDERTONE CONNECT ABS9
product. Some of the functions can also be controlled using the app.
1. Power Button ( )
You must press this button to switch the controller on or off. You
can pause a toning session by pressing this button briefly. To
resume the session, simply press it briefly again. You can also
pause a session using the app.
Note:
The indicator light on the Power Button has a number of functions,
which are listed on page 8.
2. Intensity Up Button ( )
As well as controlling the strength of your toning session using the app,
you can also use this button to increase the strength of the stimulation.
This button will override the app control.
3. Intensity Down Button ( )
As with the Intensity Up Button, as well as controlling the strength of your toning session using the app, you can also
use this button to decrease the strength of the stimulation. This button will override the app control.
4. Stimulation Indicator ( )
This indicator light glows amber when your ab muscles are being stimulated. It has other functions, which are explained
on page 8.
5. Battery Indicator ( )
This dual-colour indicator light indicates the amount of charge left in the battery in the sequence shown on page 8.
Note:
If the battery is completely discharged, this indicator may not glow at all for a short while after you begin charging your
controller.
1
5
4
3
2
)
3. Intensity Down Button ( )
5. Battery Indicator ( )
7
English
Slendertone Connect IM 5L_ML Book 26/05/2015 10:50 Page 8

24”-31” / 61-79cm
30”-38” / 76-97cm
37”-42” / 94-107cm
Controller Indicators
The controller has 3 indicator lights with various different functions. These are explained here.
* This indicates poor contact between the belt and GelPads or between the GelPads and your skin (see page 14).
SLENDERTONE CONNECT ABS9Belt
The belt fits a range of waist sizes (24”-42”/ 61-107cm). On either side of the square in the centre of the belt are 3
size indicators. These show the positions in which you should place the 2 oval GelPads depending on your waist
size. For example, if you have a small waist, the two oval GelPads should be placed within the outlines closest to the
square. Use the size guide below to help you identify where to place the oval GelPads to suit your waist size.
Power Indicator Stimulation Indicator Battery Indicator
Constantly On Amber = Battery Charging
Green = Fully Charged
Slow On-Off Controller On On = Muscle Contraction
Off = Relaxation Phase
Slow Flash Programme Paused Amber = Low Battery
Fast Flash Bluetooth®Pairing GelPad Contact Error*
Controller Error
Cycles Through All LEDs Updating Controller Software Updating Controller Software Updating Controller Software
8
Slendertone Connect IM 5L_ML Book 26/05/2015 10:50 Page 9

Getting Started
Important:
You must ensure your smart device has Bluetooth®Smart capability and that it is enabled. For a full list of Bluetooth®
Smart compatible devices, see www.slendertone.com/compatibility.
1. First, ensure you have internet connectivity, then open iTunes and search for the “SLENDERTONE CONNECT” app ( ).
Download the app and launch it.
2. Next, enable your Bluetooth®by opening your smart device’s Settings and turning on “Bluetooth®”.
Charge the Battery
1. Your controller’s battery is shipped partially charged. However, when you unpack the
controller, we recommend that you fully charge the battery for a minimum of 3 hours.
2. To charge the battery, remove the controller from the belt, connect the USB cable to
the controller (Fig. a) and to a USB charger or your PC. The battery is fully charged
when the battery indicator ( ) glows green. When the battery indicator begins
flashing orange, it is time to recharge the battery again.
Note:
•Ensure your charger plug meets the specifications listed on Page 20.
Register Your Product
You should register your product when you first download the app in order to avail of the complete SLENDERTONE
CONNECT ABS9experience from the outset. Your controller will work prior to registration as it is pre-set with SLENDERTONE’s
‘Essential Toning’ programme and can be operated using the controller buttons. However, this programme cannot be
controlled by your smart device, nor will you have access to the full range of toning programmes or SLENDERTONE
CONNECT ABS9functions and support until you have registered your product.
During the registration process, you will be asked questions about your motivation for toning and your activity level. This
data is used to offer you the most suitable SLENDERTONE CONNECT ABS9treatment regime for your needs. You can then
set yourself weekly targets, switch between toning regimen and maintain a record of your progress over time.
Fig. a
9
English
Slendertone Connect IM 5L_ML Book 26/05/2015 10:50 Page 10

Pairing Your Controller & Smart Device
Important:
You should Pair your controller with your smart device before it is inserted into the holster on the belt.
Ensure your controller is switched on, then open the app and complete the set-up proces. Follow the on-screen
instructions to pair your smart device with your controller.
Notes:
•Your controller and smart device should connect automatically every time they are both
switched on with Bluetooth®enabled.
•If the pairing fails, your smart device will advise you of this and you should retry the
process.
Position the Conductive GelPads
1. Position the belt on a flat surface with the 3 metal studs facing upwards.
2. Remove the three adhesive GelPads from their pack. There is 1 large, square GelPad and
2 small, oval GelPads. One side of each GelPad has a grid pattern on it while the other
side is plain black.
3. Remove the covers from the patterned side of the square GelPad (Fig. b) and place
the GelPad patterned side down within the blue square to cover the central metal
stud (Fig. c). Press the edges of the GelPad firmly onto the belt.
4. Then remove the covers from the patterned side of the two oval GelPads and place
them patterned side down either side of the square GelPad (Fig. d) in the positions best
suited to your waist size (see page 8). Press the edges of both GelPads firmly onto the
belt.
Important :
• Make sure that all three silver studs are completely covered by the GelPads.
• You should only use SLENDERTONE GelPads with your SLENDERTONE CONNECT ABS9 product.
5. Align the contacts on the controller with those in the belt’s holster, place the controller
on top of the holster and lightly push it down on both sides (Fig e) until the controller
clicks into place. Ensure the whole of the controller has been clicked into place.
10
Fig. b
Fig. c
Fig. d
Fig. e
Slendertone Connect IM 5L_ML Book 26/05/2015 10:50 Page 11

Running an Abdominal Training Programme
1. Remove the covers from the black side of the GelPads (Fig. f). Do not throw these
covers away as you will need to put them back onto the GelPads at the end of your
session.
2. Position the square GelPad over your navel (belly button) and stretch the ends of
the belt around your waist until the oval GelPads are between your hip bone and
ribs on either side of your body (Fig. g). The GelPads are water-based, so you may
find they are cool when placed on your skin. Fasten the belt and press each GelPad
firmly against your skin. You should fasten the belt tightly, but not so tight as to
cause discomfort.
3. Press the Power Button to switch on the controller (Fig. h) and open the app on
your smart device.
4. Select “Start Programme” and begin increasing the intensity by dragging the slider
on screen. You can also do this by pressing the increase intensity button ( ) on
the controller itself. Your intensity level is indicated in the slider. You should feel a
gentle prickling sensation at first. Then, as you continue to increase the intensity,
you should begin to feel a smooth, comfortable contraction of your abs.
Continue increasing the intensity throughout the session, if possible. Remember the
harder you work your muscles the better the results you will see, but always reduce
the intensity if you feel any discomfort. Your product’s intensity range is 0-100. You
can increase and decrease the intensity more rapidly by keeping your finger on the
app slider as you increase the intensity. You can also do this by pressing and holding
the increase intensity ( ) or decrease intensity ( ) buttons on the controller itself.
Pausing a Session
If you wish to pause a session before it’s finished, press Pause on screen ( ). To resume the session, simply press
Pause a second time. You can also pause and resume the session by briefly pressing the Power Button on the controller.
You may switch off your controller at any time during a session by pressing the Power Button for two seconds.
At the end of the training session your SLENDERTONE CONNECT ABS9will stop automatically and the controller will emit a
'successful session' tone. Carefully remove the belt and put the covers back on the black side of the GelPads. The
controller and GelPads can be left on the belt between sessions.
11
English
Fig. h
Fig. g
Fig. f
Slendertone Connect IM 5L_ML Book 26/05/2015 10:50 Page 12

Frequently Asked Questions
Can I use SLENDERTONE CONNECT ABS9 for post natal exercise?
• Yes, but you must wait a minimum of 6 weeks after childbirth before you begin using it and you must consult
your doctor first.
• If you’ve had a caesarean section in the past 3 months, consult your doctor for approval before using the belt.
The stimulation is uncomfortable. How can I improve this?
• Make sure the GelPads are positioned correctly and that they are pressed firmly against your skin - see page 11.
Switch off your controller and reposition the belt if necessary.
• You can also smear a few drops of water on the black surface of the GelPads. This can improve the comfort of
the muscle stimulation, but be careful not to get water on the controller. Ensure the controller is switched OFF
before you do this!
• Ensure the metal studs are fully covered by the GelPads.
My skin is red after the exercise. Is this a problem?
•Temporary reddening of the skin under the GelPads after a toning session is normal. It is partly a result of increased
blood flow and should fade after a short while. Just as with tight clothing, the belt itself can leave a temporary skin
mark which should also fade quickly.
•If the redness is excessive, or persists for longer than 30 minutes, check the condition of your GelPads. Dry GelPads
can cause skin discomfort during stimulation causing irritation. In rare cases people can have an allergic skin reaction
to the GelPads, or be exceptionally sensitive to the stimulation current. Please contact customer care for advice.
The unit is not switching on. What should I do?
•If the Power Indicator doesn’t light-up or the controller switch on when you press the Power Button, the battery
has most likely been completely discharged. Remove the controller from the belt, connect the USB cable and
charge your controller for a minimum of 3 hours. You should notice the amber Battery Indicator will come on
within a few minutes of beginning the charge.
•If the problem persists after charging, you should contact customer care for further assistance, as the controller
may need to be replaced.
How do I know when to replace the GelPads?
• With time the GelPads pick up skin debris and will need to be replaced, as this makes the workout less effective
and less comfortable.
• You may notice the signal is weakening even if the battery is fully charged. This usually indicates that the GelPads
are wearing and will soon need replacing. You can check this by first adjusting the belt to ensure correct
positioning of the GelPads. If the signal is still weak or uncomfortable, you should order new GelPads.
• New GelPads can be purchased from www.slendertone.com or from customer care.
12
Slendertone Connect IM 5L_ML Book 26/05/2015 10:50 Page 13

Will the product cause muscle soreness?
• As with all exercise some muscle soreness can occur after using the belt. This is normal and should go away after
a day or two. Use a low toning intensity for a few sessions if you are experiencing muscle soreness.
I can feel a tingling sensation in my legs during an exercise. What should I do?
• This indicates that the GelPads are over your hip-bones. Moving the two oval GelPads upwards and inwards on
your waist (i.e. towards the centre of your body) should prevent this. Remember to pause or switch off your
SLENDERTONE CONNECT ABS9 before adjusting the belt or GelPads.
I can feel my waist muscles exercising but not my stomach muscles.
• Pause the programme and reposition the central GelPad slightly lower on your stomach. If this doesn’t help, move
the 2 oval GelPads to a smaller figure setting on the belt (towards the central GelPad).
I can feel my stomach muscles exercising but not my waist muscles.
• Pause the programme and reposition the central GelPad slightly higher on your stomach. If this doesn’t help,
move the 2 oval GelPads to a larger figure setting on the belt (away from the central GelPad).
What happens if my smart device’s battery runs out during a session?
• Don’t worry, the session will continue as normal. You can simply use the controller to regulate the intensity, pause
or stop the session.
How do I know when to replace my controller’s battery?
• Our batteries are designed to last for years. However if your battery is degrading please do not attempt to open
your controller and replace it. These batteries are non replaceable. If it is outside the warranty period, you can
purchase a new controller from our customer care team - [e-mail].
13
English
Please refer to the Help section of the app or to the FAQ section of
the website for additional information and tips on using the product.
Slendertone Connect IM 5L_ML Book 26/05/2015 10:50 Page 14

Troubleshooting Guide
The following is a basic troubleshooting guide. A more detailed guide is available via the app.
14
Problem
Unit is on and stimulation indicator is lit
but there is no stimulation
Unit is not connecting to the app
The contractions are weak even with a
high intensity
Unpleasant feeling beneath the
GelPads during a session OR GelPad
contact error
I can’t see the Connect Bluetooth®
connection on my smart device
Unit will not charge
Unit is beeping and the Stimulation
Indicator is flashing
Error message appears on the app
Possible Cause
Intensity is too low
Unit and app are not paired
Battery is low
Poor contact with the skin
GelPads are not covering the metal
studs
Poor contact with the skin
The GelPads are worn
GelPads are not covering the metal
studs
Metal studs are not clean
You have not paired the unit with the
device correctly
USB cable may not be connected to a
suitable power source
Indicates poor contact between the belt
and GelPads or between the GelPads and
your skin
Unit Error
Unit Error
Solution
Increase the intensity
See page 10 for pairing instructions
Recharge the battery
Press GelPads firmly against the skin
Reposition the pads so that the metal
studs are covered
Press GelPads firmly against the skin.
New GelPads are available from
SLENDERTONE
Reposition the pads so that the metal
studs are covered
Clean any residue from the metal studs
with a dry cloth and replace the GelPads
See page 10 for correct pairing
instructions
Ensure the correct type of USB charger
is used
Switch off the unit, remove the belt and
check the pads are positioned correctly
and covering the metal studs.
Switch off and on again. If the problem
persists, contact SLENDERTONE
Go the Help section of the app for
assistance
Slendertone Connect IM 5L_ML Book 26/05/2015 10:50 Page 15

Caring For Your Product
Your controller should not be allowed to get wet or be left in excessive sunlight. It may be cleaned regularly using a
soft cloth, lightly dampened in soapy water. Do not allow the interior of your controller to become wet. Do not use
detergents, alcohol, spray aerosols or strong solvents on your controller.
Access to the interior of the controller is not required for maintenance purposes. The battery is not accessible or
replaceable. Do not try to open the controller if there is a problem with your battery, contact customer care instead.
If your controller is damaged, you should not use it but should return it to SLENDERTONE or your local distributor for
replacement or repair. Repairs and service may not be carried out by anyone other than qualified service personnel
authorised by SLENDERTONE. You should report any unexpected operation or event to SLENDERTONE or your distributor.
You may use a lightly dampened cloth to clean the holster, however you should avoid getting the connectors wet.
Caring For Your GelPads
•The durability and effectiveness of the GelPads depends entirely on their use, storage and care. Certain skin types,
the duration, number of sessions, intensity used and area of stimulation can also affect the life of the GelPads.
•The GelPads are for single person use only.
•You should ensure your skin is clean and free of oils, creams and other lotions before use.
•Ensure your hands are clean before handling GelPads. You should avoid touching the skin-side of the GelPads with
your fingers as much as possible when applying or removing the belt, as this can transfer oils and skin particles to
the GelPads’ surface.
•After use, replace the liners on the black side of the GelPads and store everything in a cool, dry place until the next
use.
•GelPads will need to be replaced periodically as the surface picks up skin debris and becomes dry over time.
•Do not use GelPads if they become torn.
Disposing of the GelPads
Used GelPads must never be disposed of in a fire but in accordance with your country’s national laws governing the
disposal of such items.
15
English
Slendertone Connect IM 5L_ML Book 26/05/2015 10:50 Page 16

Caring For Your Belt
Your belt can be washed, but you must first remove the controller and GelPads and try to avoid immersing the holster
in the water. Always follow the instructions on the label when washing the belt.
Never machine wash your belt. Always hand wash in lukewarm water. This protects the internal wiring from
damage in the washing machine. You should take care even when hand washing and never wring the belt to
remove water.
Do not use bleach when washing the belt.
Do not dry clean your belt.
Do not tumble dry your belt. Dry the belt on a flat surface. Do not dry it over anything hot. (e.g. a radiator) as
the belt contains plastic parts. Ensure the belt is completely dry before using it again.
The belt should not be ironed.
Accessories
Under no circumstances should anything other than SLENDERTONE accessories be used with your SLENDERTONE
CONNECT ABS9product (Type 570). Any others may not be compatible with your product and could degrade the
minimum safety levels. You can purchase all accessories from www.slendertone.com or by calling customer care.
SLENDERTONE CONNECT ABS9Belt:
SLENDERTONE ABS GelPads: • 1 large, square GelPad (Type 732)
• 2 small, oval GelPads (Type 733)
USB Cable: Type A to Micro B USB Charger
16
Slendertone Connect IM 5L_ML Book 26/05/2015 10:50 Page 17

Technical Specifications
Product Type: 570
Intended use: Abdominal muscle stimulator
Classification:
• Internally powered equipment, Type BF applied parts.
• This product is intended for continuous operation. i.e. operation in normal use, for an unlimited period of time,
without the specified limits of temperature being exceeded.
• This product is not suitable for use in an oxygen-rich environment.
• This product is not suitable for sterilisation.
• Protected against ingress of water, as per IP22.
Waveform: Symmetrical bi-phasic pulse waveform when measured into a resistive load.
Note:
•The signal gradually increases to a peak intensity level at the start of the contraction phase (i.e. ramp up) and
gradually decreases to nothing at the start of the relaxation phase (i.e. ramp down). When a GelPad contact
problem is detected, the signal ceases.
Environmental Specifications:
Operating Range: Temperature: 5 to 40˚C
Humidity: 15 to 93 % RH (non condensing)
Atmospheric Pressure: 70 to 106kPa
Transport & Storage Range: Temperature: -25 to +70˚ C
Humidity: 10 to 93% RH (non condensing)
Atmospheric Pressure: 50-106kPa
The Output Frequency indicates the number of pulses per second transmitted by the controller. This is measured in
hertz, which is indicated by Hz”.
Output (RMSA) means the maximum output root mean square current for each channel.
Output (RMSV) means the maximum output root mean square voltage for each channel.
17
English
Slendertone Connect IM 5L_ML Book 26/05/2015 10:50 Page 18

Description of the controller’s symbols:
There are a number of technical markings on your controller. These can be explained as follows:
The product is manufactured for Bio-Medical Research Ltd, Parkmore Business Park West, Galway, Ireland.
The controller contains 1 x 4.2V Li-Po battery.
This symbol means Attention, read the accompanying documents.
This symbol means type BF applied parts (belt & GelPads).
The CE mark applied indicates that this equipment complies with the requirements of the ROHS Directive
(2011/65/EU) for the Restriction of Hazardous Substances in Electrical and Electronic Equipment.
Hereby, BMR Ltd., declares that this Slendertone Connect is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at the address BMR
Ltd., Parkmore Business Park West, Galway, Ireland.
SN stands for serial number. Inside the box, on the back of the controller is the serial number specific to this product. The
letter preceding the number indicates the year of manufacture, where ‘T’ denotes 2014, ‘U’ denotes 2015 etc.
At the end of the product lifecycle, do not throw this product or batteries into the normal household garbage, but
bring it to a collection point for the recycling of electronic equipment.
Some product materials can be re-used if you bring them to a recycling point. By re-using some parts or raw
materials from used products you make an important contribution to the protection of the environment. Please
contact your local authorities if you need more information about collection points in your area.
Waste Electrical and Electronic Equipment can have potentially harmful effects on the environment. Incorrect
disposal can cause harmful toxins to build up in the air, water and soil and can be harmful to human health.
Product uses Bluetooth®Smart.
IP22: Ingress Protection Rating.
This symbol on the device means it is protected against access to hazardous parts with a finger and against vertically falling
water drops when tilted up to 15 degrees.
VXX: Software version at shipping.
18
Slendertone Connect IM 5L_ML Book 26/05/2015 10:50 Page 19

This symbol means that this device emits nonionising radiation. All devices and systems that include RF
transmitters or that intentionally apply RF electromagnetic energy must have a label with this symbol.
FCC/IC transmitter declaration:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. This device complies with Industry Canada license-exempt RSSs.
Rated Outputs / Voltage/Currents: Type 570
The electrical output of the SLENDERTONE CONNECT ABS9depends on the parameter settings of the active NMES
program. The program loaded at manufacture is described as “Essential Toning” and delivers the following output:
Parameter 500!1K!
Waveform type Symmetric, biphasic, constant current controlled
Peak Output Current (user adjustable) 0 - 75 mA 0 - 70mA
Peak Output Voltage 0 - 38V 0 - 70 V
Output Frequency range 60 - 70 Hz 60 - 70 Hz
Phase Duration 250 -300 µS 250 - 300 µS
DC Component none none
The SLENDERTONE CONNECT app allows you to select from range of other NMES programs, each having different
parameter selections. The following table gives the limits of these parameters. All SLENDERTONE CONNECT ABS9
programs are within these limits.
Parameter 500!1K!
Waveform type Symmetric, biphasic, constant current controlled
Peak Output Current (user adjustable) 0 - 80 mA 0 - 70mA
Peak Output Voltage 0 - 40V 0 - 70V
Output Frequency range 10 - 80 Hz 20 - 80 Hz
Phase Duration 100µS - 400 µS 200µS - 400 µS
DC Component none none
The parameters of each program can be viewed on the app. The maximum power per channel into a 500!load is
180mW.
19
English
Slendertone Connect IM 5L_ML Book 26/05/2015 10:50 Page 20

Battery Charging & Discharging
Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but
it will eventually wear out. To ensure optimum battery performance you should use your device regularly e.g. perform
one session a day, four days per week.
To conserve energy, disconnect the USB cable from the controller when the battery is fully charged.
Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, may reduce the
capacity and lifetime of the battery. A device with a hot or cold battery may cease working temporarily, even when the
battery is full charged. Battery performance is particularly limited in temperatures below freezing. Do not dispose of
batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local
regulations. Please recycle when possible. Do not dispose as household waste.
Charging Specifications
When charging the battery, you must use a charger with the following outputs: Output Voltage: 5V DC nominal.
Output Current: 0.5A (500mA) minimum. Output Connector: Micro-B USB Connector.
Expected Service Life
Controller: 2 years
Belt: 2 years
GelPads: 20-30 Sessions
Product Warranty (EU Only)
Should your unit develop a fault within two years of purchase, SLENDERTONE will undertake to replace or repair the unit
or any parts found to be defective with no charge for labour or materials *, provided the unit:
• Has been used for its intended purpose and in the manner described in this user manual.
• Has not been connected to an unsuitable power source.
• Has not been subjected to misuse or neglect.
• Has not been modified or repaired by anyone other than an approved slendertone agent.
This guarantee complements existing national guarantee obligations and does not affect your statutory rights as a
consumer.
* This excludes consumables (e.g. pads, belt, etc.) which are subject to normal wear and tear.
•US/Canada warranty details are available from www.slendertone.com or from customer care - [e-mail].
20
Slendertone Connect IM 5L_ML Book 26/05/2015 10:50 Page 21