SMA SUNNY BOY 3000TL Single Tracker User manual

SB30-50TL-21-IA-en-21 | IMEN-SBXTL-21 | Version 2.1
EN
PV Inverters
SUNNY BOY 3000TL / 3600TL / 4000TL / 5000TL
Installation Manual

SMA Solar Technology AG Table of Contents
Installation Manual SB30-50TL-21-IA-en-21 3
Table of Contents
1 Information on this Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.1 Validity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.2 Target Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.3 Additional Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.4 Symbols Used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.1 Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.2 Qualification of Skilled Persons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.3 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3 Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.1 Sunny Boy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.2 Symbols on the Inverter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.3 Type label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3.4 Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3.5 Electronic Solar Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3.6 Bluetooth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3.7 Slot for Communication Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3.8 Slot for Multi-Function Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3.9 Operating parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3.10 SMA OptiTrac Global Peak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
3.11 Grid Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
3.12 Varistors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
3.13 SMA Grid Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
4 Unpacking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4.1 Scope of Delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Table of Contents SMA Solar Technology AG
4 SB30-50TL-21-IA-en-21 Installation Manual
5 Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
5.1 Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
5.2 Selecting the Mounting Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
5.3 Mounting the Inverter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6 Electrical Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
6.1 Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
6.2 Overview of the Connection Area. . . . . . . . . . . . . . . . . . . . . . . . . . . 31
6.3 Connection to the Electricity Mains (AC). . . . . . . . . . . . . . . . . . . . . . 33
6.3.1 Conditions for the AC Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 33
6.3.2 Connecting the Inverter to the Electricity Mains (AC) . . . . . . . . . . . 36
6.3.3 Additional Earthing of the Enclosure . . . . . . . . . . . . . . . . . . . . . . . . 39
6.4 Connecting the PV Array (DC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
6.4.1 Conditions for DC Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
6.4.2 Assembling the DC Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
6.4.3 Disassembling the DC Connector . . . . . . . . . . . . . . . . . . . . . . . . . . 44
6.4.4 Connecting the PV Array (DC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
6.5 Setting the Country Standard and Display Language . . . . . . . . . . . . 48
6.5.1 Checking the Country Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
6.5.2 Setting the Country Standard and Language using the
Rotary Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
6.6 Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
6.6.1 Interface for Wireline Communication . . . . . . . . . . . . . . . . . . . . . . . 55
6.6.2 Setting the Bluetooth NetID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
7 Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
7.1 Commissioning the Inverter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
7.2 Display Messages during the Start-up Phase. . . . . . . . . . . . . . . . . . . 58
7.3 Only for Italy: Self-Test in Accordance with CEI 0-21 for
PV Plants ≤ 6 kW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
7.3.1 Starting the Self-Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
7.3.2 Abortion of the Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
7.3.3 Restarting the Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
7.4 Deactivating Protective Conductor Monitoring . . . . . . . . . . . . . . . . . 61

SMA Solar Technology AG Table of Contents
Installation Manual SB30-50TL-21-IA-en-21 5
8 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
8.1 Changing the Plant Time and Plant Password . . . . . . . . . . . . . . . . . . 62
8.2 Activating and Setting SMA OptiTrac Global Peak . . . . . . . . . . . . . 62
9 Opening and Closing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
9.1 Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
9.2 Disconnecting the Inverter from Voltage Sources . . . . . . . . . . . . . . . 64
9.3 Closing the Inverter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
10 Maintenance and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
10.1 Cleaning the Inverter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
10.2 Checking Heat Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
10.3 Checking the Electronic Solar Switch for Wear. . . . . . . . . . . . . . . . . 70
11 Slot for SD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
12 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
12.1 LED Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
12.2 Event Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
12.3 Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
12.4 DC Current after AC-side Disconnection . . . . . . . . . . . . . . . . . . . . . . 84
12.5 Checking the PV Array for Earth Faults . . . . . . . . . . . . . . . . . . . . . . . 84
12.6 Checking the Function of the Varistors. . . . . . . . . . . . . . . . . . . . . . . . 86
13 Decommissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
13.1 Dismantling the Inverter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
13.2 Replacing the Enclosure Lid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
13.3 Packing the Inverter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
13.4 Storing the Inverter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
13.5 Disposing of the Inverter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Table of Contents SMA Solar Technology AG
6 SB30-50TL-21-IA-en-21 Installation Manual
14 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
14.1 Sunny Boy 3000TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
14.2 Sunny Boy 3600TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
14.3 Sunny Boy 4000TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
14.4 Sunny Boy 5000TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
15 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
16 Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

SMA Solar Technology AG 1 Information on this Manual
Installation Manual SB30-50TL-21-IA-en-21 7
1 Information on this Manual
1.1 Validity
This manual applies to the following device types:
• Sunny Boy 3000TL (SB 3000TL-21)
• Sunny Boy 3600TL (SB 3600TL-21)
• Sunny Boy 4000TL (SB 4000TL-21)
• Sunny Boy 5000TL (SB 5000TL-21)
1.2 Target Group
This manual is intended for skilled persons. Only qualified personnel with the appropriate skills are
allowed to perform the tasks set forth in this manual (see Section2.2 "Qualification of Skilled Persons",
page10).
1.3 Additional Information
Links to additional information can be found at www.SMA-Solar.com:
Document title Document type
Miniature Circuit-Breaker Technical information
Measured Values and Parameters Technical description
SMA Bluetooth ‒ SMA Bluetooth® Wireless Technology in Practice Technical information
SMA Bluetooth® Wireless Technology Technical description
Module Technology Technical information
Capacitive Leakage Currents Technical information

1 Information on this Manual SMA Solar Technology AG
8 SB30-50TL-21-IA-en-21 Installation Manual
1.4 Symbols Used
The following types of safety precautions and general information are used in this manual:
Nomenclature
The following nomenclature is used in this manual:
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a safety precaution which, if not avoided, could result in death or serious
injury.
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate
injury.
NOTICE indicates a situation which, if not avoided, could result in property damage.
Information
Information provides tips that are valuable for effective installation and operation of the
product.
☑ This symbol indicates the result of an action.
Complete designation Short form in this manual
Sunny Boy 3000TL / 3600TL / 4000TL / 5000TL Inverter, product
Electronic Solar Switch ESS
SMA Bluetooth® Wireless Technology Bluetooth

SMA Solar Technology AG 2 Safety
Installation Manual SB30-50TL-21-IA-en-21 9
2 Safety
2.1 Intended Use
The Sunny Boy is a PV inverter, which converts the direct current of the PV array to grid-compliant
alternating current and feeds it into the electricity grid.
Principle of a PV plant with this Sunny Boy
The Sunny Boy is suitable for indoor and outdoor use.
The Sunny Boy must only be operated with PV arrays of protection class II, in accordance with
IEC 61730, class A. The PV modules must be suitable for use with the Sunny Boy and must have been
released by the module manufacturer.
PV modules with large capacities to earth may only be used if their coupling capacity does not exceed
1,400 nF.
Alternative uses, modifications to the Sunny Boy or the installation of component parts not expressly
recommended or sold by SMA Solar Technology AG are not permitted.
Persons with limited physical or mental abilities may only work on the Sunny Boy after due instruction
and under constant supervision. Children are forbidden to play with the Sunny Boy. Ensure that the
Sunny Boy is kept out of reach of children.

2 Safety SMA Solar Technology AG
10 SB30-50TL-21-IA-en-21 Installation Manual
Only use the Sunny Boy in accordance with the information provided in the enclosed documentation.
Any other use may result in personal injury or property damage.
• Do not mount the inverter on flammable construction materials.
• Do not mount the inverter in areas where highly flammable materials are stored.
• Do not mount the inverter in a potentially explosive atmosphere.
The enclosed documentation is an integral part of this product.
• Read and follow the documentation to ensure the correct and optimum use of the Sunny Boy.
• Keep the documentation in a convenient place for future reference.
2.2 Qualification of Skilled Persons
The tasks described in this manual may be performed by skilled persons only. Skilled persons must
have the following qualifications:
• Knowledge of how an inverter works and is operated
• Training in how to deal with the dangers and risks associated with installing and using electrical
devices and plants
• Training in the installation and commissioning of electrical devices and plants
• Knowledge of all applicable standards and directives
• Knowledge of and adherence to this manual and all the specified safety precautions
2.3 Safety Precautions
Danger to life due to electric shock.
When exposed to sunlight, the PV array generates a dangerous direct voltage which is present in
the DC conductors or the live components in the inverter.
• Do not touch the DC conductors.
• Do not touch live components in the inverter.
• Prior to performing any work on the inverter, always disconnect it from any voltage sources
as described in this document (see Section9.2 "Disconnecting the Inverter from Voltage
Sources", page64).

SMA Solar Technology AG 2 Safety
Installation Manual SB30-50TL-21-IA-en-21 11
Risk of burns due to electric arc
To prevent arcing when disconnecting DC connectors, the ESS and DC connectors must be removed
from the inverter, or the external DC switch-disconnector must be switched off and the
DC connectors must be removed from the inverter before performing any work on the PV array.
• Before starting work on the PV array, always disconnect the inverter on the AC and DC sides
(see Section9.2 "Disconnecting the Inverter from Voltage Sources", page64).
• Attach the enclosed warning label "Risk of burns from electric arc" so that it is clearly visible
on the external AC disconnection device.
Risk of electric shock if DC connectors are pulled out under load
If you disconnect the DC connectors from the inverter under load, an electric arc may occur, causing
electric shock and burns.
• If the inverter is equipped with an ESS and the regulations in the country of installation require
an external DC switch-disconnector, install an external DC switch-disconnector.
• Switch off the AC miniature circuit-breaker and disconnect the inverter on the DC side before
pulling out the DC connectors.
Risk of burns due to hot enclosure parts
Some parts of the enclosure may become hot during operation.
• Do not touch any parts other than the lower enclosure lid of the inverter during operation.
Earthing of the PV array
Comply with local regulations for the earthing of the modules and the PV array.
SMA Solar Technology AG recommends connecting the array frame and other electrically
conductive surfaces so that there is continuous conduction, and earthing them in order to ensure
maximum protection for property and persons.

3 Product Description SMA Solar Technology AG
12 SB30-50TL-21-IA-en-21 Installation Manual
3 Product Description
3.1 Sunny Boy
The Sunny Boy is a PV inverter, which converts the direct current of the PV array to grid-compliant
alternating current and feeds it into the electricity grid.
Item Description
AType label
BLEDs
CDisplay
DElectronic Solar Switch*
*Optional
ELower enclosure lid
FUpper enclosure lid

SMA Solar Technology AG 3 Product Description
Installation Manual SB30-50TL-21-IA-en-21 13
3.2 Symbols on the Inverter
Symbol Description Explanation
Inverter This symbol defines the function of the green LED.
It indicates the operating state of the inverter.
Observe the
documentation.
This symbol defines the function of the red LED.
It indicates a fault or disturbance. Please read the
manual to find information on how to remedy the
fault or disturbance.
Bluetooth This symbol defines the function of the blue LED.
It indicates that communication via Bluetooth is
activated.
QR Code®Links to additional information on the inverter can
be found at www.SMA-Solar.com.
Danger Observe the connection requirements for a
second protective conductor (see Section6.3.1
"Conditions for the AC Connection", page33).
Danger to life due to
high voltages in the
inverter
The capacitors in the inverter may be charged
with very high voltages.
• Disconnect the inverter from voltage
sources (see Section 9.2) and wait
5 minutes before opening the upper lid, in
order to allow time for the capacitors to
discharge.

3 Product Description SMA Solar Technology AG
14 SB30-50TL-21-IA-en-21 Installation Manual
3.3 Type label
The type label uniquely identifies the inverter. The type label is located on the right-hand side of the
enclosure. You will find the following information on the type label:
• Device type (Model)
•Serial number (Serial No.)
• Date of manufacture
• Device-specific characteristics
The information on the type label is intended to help you use the inverter safely and receive targeted
customer support from the SMA Service Line. The type label must remain permanently attached to the
inverter.
Symbols on the Type Label
Symbol Description Explanation
Danger to life due to high
voltages
The product operates at high voltages.
All work on the product must be carried out
by skilled persons only.
Risk of burns from hot
surfaces
The product can get hot during operation.
Avoid contact during operation.
Allow the product to cool down sufficiently
before carrying out any work. Wear
personal protective equipment such as
safety gloves.
Observe the
documentation.
Observe all the documentation supplied with
the product.
Without transformer The product does not have a transformer.
DC Direct current
AC Alternating current
Degree of protection The product is protected against dust
intrusion and water jets from any angle.
Outdoor The product is suitable for outdoor
installation.

SMA Solar Technology AG 3 Product Description
Installation Manual SB30-50TL-21-IA-en-21 15
WEEE designation Do not dispose of the product with
household waste, but only in accordance
with the locally applicable disposal
regulations for electronic waste.
CE marking The product complies with the requirements
of the applicable EU directives.
Device class ID The product is equipped with a wireless
component and complies with
Device Class 2.
RAL quality mark for solar
products
The product complies with the requirements
of the German Institute for Quality
Assurance and Certification.
Certified safety The product is VDE-tested and complies with
the requirements of the German Equipment
and Product Safety Act.
C-Tick The product complies with the requirements
of the applicable Australian EMC standards.
Symbol Description Explanation

3 Product Description SMA Solar Technology AG
16 SB30-50TL-21-IA-en-21 Installation Manual
3.4 Display
The display shows the current operating data of the inverter (e.g. status, power, input voltage) as well
as faults and disturbances.
Item Description Explanation
APower Displays the current power
BDay Displays the amount of energy fed in so far today
CTotal Total amount of energy fed in until now
DActive functions The symbols indicate which communication or power
regulation functions are enabled.
EPhase assignment Shows assignment of the inverter to a phase. It is also
used to indicate external power limitation.
FElectricity grid event
number
Event number of a disturbance in the electricity grid
GOutput voltage/
output current
The display alternately shows the output voltage and
the output current of the inverter.
HInverter event number Event number of a device disturbance
IInput voltage/
input current
The display alternately shows the input voltage and
the input current at one input of the inverter.
KPV array event number Event number of a disturbance in the PV array
kVAr
kVArh
kWh
MVArh
MWh
kW
kWh
A
B
C
D
E
F
G
H
K
L
M
I
t/hday

SMA Solar Technology AG 3 Product Description
Installation Manual SB30-50TL-21-IA-en-21 17
Symbols on the Display
LText line The text line shows event messages.
MPower and yield curve The diagram shows the changes in power over the
last 16 feed-in hours or the energy yields over the last
16 days. Tap the display once to switch between
views.
Symbol Designation Explanation
Tapping You can operate the display by tapping it:
• Single tap: the backlight switches on or the
display scrolls to the next display message.
• Double tap: the display shows, in
succession, the firmware version, the
inverter serial number or designation, the
Bluetooth NetID, the configured country
standard and the display language.
Telephone receiver Device disturbance present.
Contact the SMA Service Line.
Spanner Disturbance which can be resolved on-site.
Bluetooth Bluetooth communication is enabled.
Bluetooth connection Bluetooth connection to other devices is active.
Multi-function relay The multi-function relay is active.
Temperature symbol The power of the inverter is limited due to
excessive temperature.
Power limitation The external active power limitation via plant
control is active
Item Description Explanation

3 Product Description SMA Solar Technology AG
18 SB30-50TL-21-IA-en-21 Installation Manual
PV array This symbol represents a PV array with strings
connected to two inputs on the inverter. The left
half of the symbol stands for input A and the right
half for input B. Whichever half is darker
indicates the input to which the current values
refer. The display switches between the inputs
every 10 seconds.
Inverter ‒
Grid relay If the grid relay is closed, the inverter feeds
power into the grid. If the grid relay is open, the
inverter is disconnected from the grid.
Electricity grid ‒
Symbol Designation Explanation

SMA Solar Technology AG 3 Product Description
Installation Manual SB30-50TL-21-IA-en-21 19
3.5 Electronic Solar Switch
The ESS is an optional DC load disconnect unit. The ESS prevents the formation of electric arcs when
the DC connectors are removed.
When plugged in, the ESS forms a conductive link between the PV array and the inverter. Removing
the ESS interrupts the electric circuit and allows you to disconnect the DC connectors from the inverter
safely.
Item Description Explanation
APlug ‒
BSafety precautions
sticker
• Never operate the inverter without the lower
enclosure lid in place.
• Observe all documentation that accompanies the
inverter.
CESS sticker • If the ESS is plugged in, the DC electric circuit
remains closed.
• To interrupt the DC electric circuit, you first need to
perform steps 1 and 2.
• Remove the ESS.
• Remove all DC connectors.
B
A
C

3 Product Description SMA Solar Technology AG
20 SB30-50TL-21-IA-en-21 Installation Manual
3.6 Bluetooth
The inverter is equipped with a Bluetooth interface as standard and can consequently communicate
with other Bluetooth devices (for information on supported SMA products, see www.SMA-Solar.com).
If you wish to communicate via Bluetooth, you can protect the inverter with one plant password for
the user and one plant password for the installer.
All inverters are delivered with a default plant password for the user (0000) and a default plant
password for the installer (1111). To protect the plant from unauthorised access, you must change
the plant passwords using a communication product (for information on changing the plant password,
refer to the manual of the communication product).
If you do not want to communicate via Bluetooth, deactivate the Bluetooth communication
(see Section6.6.2 "Setting the Bluetooth NetID", page56)).
3.7 Slot for Communication Interface
The inverter can optionally be fitted with an extra communication interface (e.g., RS485 or
Speedwire/Webconnect). This communication interface will enable the inverter to communicate with
specific SMA communication products (for information on supported products, see
www.SMA-Solar.com).
The communication interface can either be retrofitted or installed ex works if specified in the
corresponding order.
Depending on the type of communication, RS485, Bluetooth or Speedwire/Webconnect, the
parameters and messages are displayed differently in the communication products.
Example: How the country data set parameter is displayed
• For communication via RS 485: parameter CntrySet
• For communication via Bluetooth or Speedwire/Webconnect: parameter
Set country standard