SMART-AVI DPX-XT User manual

DisplayPort, USB 2.0 and Audio
KVM CAT5/6 Extender
EXTEND DIGITAL VIDEO
(DISPLAYPORT 4K30HZ), USB
2.0, USB 1.1 KEYBOARD/
MOUSE AND AUDIO
UP TO 330 FT (100 M) OVER
A SINGLE CAT5E/6/6A
UNCOMPRESSED
Quick Start Guide
VIDEO
Format DisplayPort 1.1 and 1.2
Video Resolution Up to 3840 x 2160 @ 30 Hz
Video Bandwidth 275 MHz
Input Interface (TX) (1) DisplayPort female
Output Interface (RX) (1) DisplayPort female
DDC via AUX
Equalization Automatic
Input Cable Length Up to 15 ft.
Output Cable Length Up to 15 ft.
AUDIO
Format Stereo
Frequency 30KHz to 80KHz
Input Interface (TX) (1) 3.5mm (Female)
Output Interface (RX) (1) 3.5mm (Female)
USB
Signal Type USB 1.1 and USB 2.0
Input Interface (TX) (1) USB Type B (Female)
Output Interface (RX) (4) USB Type A (Female)
OTHER
Power External 100-240 VAC/5VDC4A
@ 20 W
Dimensions 5.5” W x 1 7/8” H x 3 1/4” D
Weight 1 lb per TX/RX unit
Operating Temp. 0-55 °C (32-131°F)
Storage Temp. -20-85 °C (-4-185 °F)
Humidity Up to 95%
NOTICE
The information contained in this document is
subject to change without notice. SmartAVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and tness for particular purpose.
SmartAVI will not be liable for errors contained
herein or for incidental or consequential damages in
connection with the furnishing, performance or use of
this material.
No part of this document may be photocopied,
reproduced, or translated into another language
without prior written consent from SmartAVI
Technologies, Inc.
800.AVI.2131, 702.800.0005
2455 W Cheyenne Ave, Suite 112
North Las Vegas, NV 89032
SmartAVI.com
TECHNICAL SPECIFICATION
DPX-XT
WHAT’S IN THE BOX
PART NO. Q-TY DESCRIPTION
DPX-XT-TX 1 DP, USB and Audio
CAT5/5e/6 Transmitter.
DPX-XT-RX 1 DP, USB and Audio
CAT5/5e/6 Receiver.
PS5VD3A-WMT 2 PS5VD3A Power Supply
Quick Start Guide 1

ABOUT DPX-XT
The DPX-XT is an extender supporting DisplayPort video
signals at resolutions up to 4K/30Hz, with bi-directional
audio and fully-transparent USB 2.0 up to 330ft.
The DPX-XT is the rst extender on the market to feature
DP 4K/30Hz, USB 2.0, and full KVM extension on one
cohesive system. Its DisplayPort 4K (3840x2160 @ 30Hz)
video output is optimized for HD monitors with crystal-clear
picture; excellent for detail-driven work.
The DPX-XT extends fully-transparent USB 2.0, supporting
keyboard, mouse, ash-drive, digital cameras, printer(s)
and a wide variety of other USB 2.0 devices!
FEATURES
• Extends DisplayPort 1.1 and 1.2, USB 2.0 and
audioup to 330  (100 m) from the source
• Supports up to 3840x2160 digital
video resoluon @ 30Hz
• Uncrompressed Video
• Supports keyboard and mouse USB 1.1
• USB 2.0 Transparent
• Carries DP, USB 2.0 and Audio
Over a Single CAT 5e/6/6a
• DisplayPort Auxiliary Bypass
• Plug-and-Play Ready
1. Power off all devices.
2. Connect a DisplayPort source (computer) to the DisplayPort port on the DPX-XT-TX.
3. Connect a USB source (computer) to the USB port on the DPX-XT-TX using a USB A to B cable (not included).
4. Connect the DPX-XT-TX to the DPX-XT-RX with one CAT5 UTP (Unsheilded Twisted Pair) cable.
5. Connect a DisplayPort compatible display to the DisplayPort port on the rear of the DPX-XT-RX.
6. Connect USB keyboard and mouse to the USB ports on the DPX-XT-RX.
7. Connect the power to the DPX-XT-RX and the DPX-XT-TX.
8. Power on the display and then the computer.
DPX-XT-TX FRONT
DPX-XT-TX BACK DPX-XT-RX BACK
DPX-XT-RX FRONT
HARDWARE INSTALLATION
DP IN
DP OUT
USB IN
USB 2.0 OUT
USB K/M OUT
AUDIO IN
AUDIO OUT
CAT5/6
330 ft
DC 5V USB IN
DPIN
LINK AUDIO
IN
AUDIO
OUT
DC 5V
DPOUT
LINK AUDIO
IN
AUDIO
OUT
USB
DPX-XT-TX
DPX-XT-RX