SMART-AVI LDX-4P User manual

Quad Head DVI-D, USB
Keyboard, Mouse
and Audio Extender
EXTEND QUAD DVI-D,
DUAL RS-232, USB AND AUDIO
UP TO 245 FEET OVER TWO
CAT5E/6 CABLES
Quick Start Guide
VIDEO
Format DVI-D
Maximum Pixel Clock 165 MHz
Input Interface (TX) (4) DVI-D 29-pin female
Output interface (RX) (4) DVI-D 29-pin female
Resolution Up to 1920 x 1200 @ 60Hz AND
Up to 4K/2K (3840x2160) @ 30Hz
DDC 5 volts p-p (TTL)
Input equalization Automatic
Input cable length Up to 20 ft
Output cable length Up to 20 ft
USB
Input interface (TX) (1) USB Type B (Female)
Output interface (RX) (2) USB Type A (Female)
Signal Type OHCI/VHCI (USB 1.1)
RS-232
Input Interface (TX) (2) DB9 (Female)
Output Interface (RX) (2) DB9 (Female)
Speed @ 115 Kbps
IR
Input Interface (TX) (1) 3.5 mm (Female)
Output Interface (RX) (1) 3.5 mm (Female)
Frequency Response 30KHz to 80KHz
OTHER
Power External 100-240 VAC/5VDC3A
@ 20W
Dimensions 17 in W x 1.7 in H x 3.2 in D
Weight 2 lbs
Operating Temp. 0-55 °C (32-131°F)
Storage Temp. -20-85 °C (-4-185 °F)
Humidity Up to 95%
NOTICE
The information contained in this document is
subject to change without notice. SmartAVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and tness for particular purpose.
SmartAVI will not be liable for errors contained
herein or for incidental or consequential damages in
connection with the furnishing, performance or use of
this material.
No part of this document may be photocopied,
reproduced, or translated into another language
without prior written consent from SmartAVI
Technologies, Inc.
800.AVI.2131, 702.800.0005
2455 W Cheyenne Ave, Suite 112
North Las Vegas, NV 89032
SmartAVI.com
TECHNICAL SPECIFICATION
LDX-4P
WHAT’S IN THE BOX
PART NO. Q-TY DESCRIPTION
LDX-4P-TX 1
Quad DVI-D, USB 1.1,
Dual RS232, Audio over
CAT5/5e/6 Transmitter
LDX-4P-RX 1
Quad DVI-D, USB 1.1,
Dual RS232, Audio over
CAT5/5e/6 Receiver
PS5VDC3A 2 PS5VD3A Power Supply
Quick Start Guide 1

OVERVIEW
Using HDBaseT technology, the LDX-4P DVI extender is
capable of sending quad DVI-D signals up to 245 feet
over four conventional and inexpensive CAT5e/6 cables.
HDBaseT technology is superior to older DVI extenders
that require a special Cat6 shielded cable to go a short
distance. The LDX-4P also has USB keyboard and mouse,
audio and RS-232 extension, giving users the ability to
control displays or devices remotely
FEATURES
• Extends dual DVI-D up to 245 feet from the source
• HDCP Support
• Supports up to 1920x1200 digital video resolution
@ 60Hz
• Supports 4K/2K (3840x2160) video resolution
@ 30Hz
• Automatic DDC Learning
• USB Keyboard and Mouse extension
• Uncompressed Video using HDBaseT
• RS-232 extension allows for remote control of displays
• External power adapter for transmitter and receiver
unit
• Supports Stereo Sound
• Compatible with Windows, Mac and Linux Operating
Systems
1. Power off all devices.
2. Connect two DVI-D sources (computer) to the four DVI-D ports on the back of the transmitter.
3. Connect a USB source (computer) to the USB port on the transmitter.
4. Optionally connect RS232 for control functions.
5. Connect the transmitter to the receiver with four CAT5 UTP (Unshielded Twisted Pair) cables.
6. Connect a DVI-D сompatible display to each of the four DVI-D ports on the back of the receiver.
7. Connect USB keyboard and mouse to the USB ports on the receiver.
8. Optionally connect RS232 for control functions.
9. Connect the power to the receiver and the transmitter.
10. Power on the display and then the computer.
LDX-4P-TX FRONT
LDX-4P-TX BACK
LDX-4P-RX FRONT
LDX-4P-RX BACK
HARDWARE INSTALLATION
DVI-D IN
DVI-D OUT
USB IN
USB OUT
AUDIO IN
AUDIO OUT
RS-232
CAT5/5E/6
1:DVI-I IN 1:DVI-I IN
LDX-4P-TX
USBIN
1:DVI-I IN 1:DVI-I IN
LDX-4P-RX
USBOUT
245 ft