SMART-AVI DVNET-4Pro User manual

USER MANUAL
DVNET-4Pro
Access and control KVM and audio on up to
4 computers using one USB keyboard one USB
mouse and a DVI-D monitor
VIDEO
Format DVI-D Single Link
Maximum Pixel Clock 165 MHz
Input Inter ace (4) DVI-D 29-pin ( emale)
Output Inter ace DVI-D 29-pin ( emale)
Resolution Up to 1920 x 1200
@60Hz
DDC 5 volts p-p(TTL)
Input Equalization Automatic
Input Cable Length Up to 20 t.
Output Cable Length Up to 20 t.
Input Inter ace (4) 3.5 mm Stereo Audio
Output Inter ace (1) 3.5 mm Stereo Audio
Impedance 600 Ohm
Frequency Response 20 Hz to 20 kHz
AUDIO
Nominal Level 0-1.0 V
Common Mode Rejection at 60 dB
TECHNICAL SPECIFICATIONS
USB
Signal Type USB 2.0, 1.1, and 1.0 w/
internal hub
Input Inter ace (4) USB Type B ( emale)
Output Inter ace (2) USB Type A ( emale)
or keyboard and mouse
connection only;
(2) or USB 2.0
Transparent
800.AVI.2131
Tel: [phone] Fax: [phone]
11651 Vanowen St. North Hollywood CA 91605
SmartAVI.com
Designed and Manufactured in the USA
OTHER
Power External 100-240 VAC/
5VDC4A @20W
Dimensions 12.6” W x 1.75” H x 6.6“ D
Weight 10 lbs.
Approvals UL, CE, ROHS Compliant
Operating Temp. 32-131 °F (0-55 °C)
Storage Temp. -4-185 °F (-20-85 °C)
Humidity Up to 95%
Emulation Keyboard and Mouse
CONTROL
Front Panel Tactile Switch
RS-232 Via Control @ 9600 bps
Hotkeys Via Keyboard
IR Optional
TECHNICAL SPECIFICATIONS
PART NO. QTY DESCRIPTION
DVN-4ProS 1 DVNET-4Pro, 4x1 Dual DVI-D,
USB 2.0, Audio Switch
Power Supply 1 PS5VDC4A
User Manual 1
WHAT’S IN THE BOX
4-Port DVI-D KVM Switch with
USB 2.0 Sharing

INTRODUCTION
DVNET-4Pro is a dedicated multi-plat orm KVM switch
capable o managing up to 4 di erent computers through
a single DVI-D monitor, USB keyboard & mouse, a single
set o speakers and a USB 2.0 Device. It eatures USB
keyboard and mouse emulation or aster and reliable
switching through the use o hotkey sequence commands.
It is also RS-232 compliant, capable o being controlled
remotely via third-party so tware.
CONNECTING THE DVNET-4Pro
1. Ensure that power is disconnected rom DVNET-
4Pro.
2. Connect the DVI cables, USB cables (male-A to male
-B), and audio cables rom the computers to the
respective ports on the DVNET-4Pro.
3. Optionally connect RS-232 or control unctions.
4. Connect the USB keyboard and mouse on the two
USB ports on the right (close to the RS-232 port).
Note: The 2 USB ports on the right are dedicated for
keyboard and mouse emulation. The 2 on the left
are for other USB peripherals (flash drives printers
etc.)
5. Connect the speakers into the Audio Out port lo-
cated above the USB ports.
6. Connect the display monitor to the DVI OUT connec-
tor on the DVNET-4Pro.
7. Power on the DVNET-4Pro.
CONTROLLING THE DVNET-4Pro
Front Panel Control
To switch ports using the ront panel, press the UP button to navigate up and DOWN button or down.
EDID learning
EDID learningEDID learning
EDID learning is also done through the ront panel buttons by pressing both buttons simultaneously.
RS-232 Control
Use a male-to- emale serial cable to connect a computer to the RS-232 port o the DVNET-4Pro. Use terminal
client so tware such as the HyperTerminal
HyperTerminalHyperTerminal
HyperTerminal to connect to the DVNET-4Pro. Make sure to use the standard com-
munication mode o 9600 bps, 8, N, 1. This port can also be used or so tware upgrade. Please re er to online
manual or more details.
Hot ey Commands
The Hotkey command is a keyboard sequence used to trigger an action on the DVNET-4Pro through the use o
the keyboard connected on the USB port o the DVNET-4Pro. To activate the hotkey sequence, press the CTRL
key twice and then enter the desired hotkey commands.
COMMANDS HOTKEYS RS-232 CONTROL
Switch all devices (KVM, USB 2.0, and Audio) [CTRL] [CTRL] m
mm
m [port #] [ENTER] //m
mm
m[port #]<CR>
Switch KVM only
onlyonly
only [CTRL] [CTRL] c
cc
c [port #] [ENTER] //c
cc
c[port #]<CR>
Switch audio only
onlyonly
only [CTRL] [CTRL] a
aa
a [port #] [ENTER] //a
aa
a[port #]<CR>
EDID Learning [CTRL] [CTRL] e
e e
e [ENTER] //e
ee
e<CR>
APPLICATION DIAGRAM
USB INPUTS
AUDIO
KEYBOARD
& MOUSE
DVI INPUTS
DVI OUTPUT
DVNET-4Pro REAR
EDID LEARNING
The DVNET-4Pro is ully capable o “learning” and remem-
bering what type o display monitor is connected to the
unit. With its EDID learning eature, the DVNET-4Pro pro-
vides plug-and-play capability to its display.
Programming the EDID can be accomplished through the
Front
FrontFront
Front-
--
-Panel buttons
Panel buttonsPanel buttons
Panel buttons or through RS
RSRS
RS-
--
-232
232232
232.
Please re er to the “Controlling the DVNET-4Pro” section o
the manual or more in o.
FEATURES
• Compatible with Windows, Mac and Linux Operating
Systems
• Supports up to 1920x1200 digital video resolution
• Uses universal DVI single-link connectors
• Supports all USB 2.0 Devices (Flash drives,
Printers, Cameras, Scanners, etc.)
• Supports USB keyboard and mouse emulation
• Balanced stereo audio output
• Front panel tactile switch with LED display or local
control
• RS-232 control or additional control
• Special Hotkey keyboard sequence to switch independ-
ent simultaneous device selection: Flexibility is key to
the DVNET-4Pro