SMART-AVI StretcherPro User manual

Notice
The information contained in this document is
subject to change without notice. SmartAVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties
of merchantability and fitness for any particular
purpose.
SmartAVI will not be liable for errors contained
herein or for incidental or consequential damages
in connection with the furnishing, performance or
use of this material.
No part of this document may be photocopied,
reproduced or translated into another language
without prior written consent from SmartAVI.
StretcherPro
User
Manual
Technical Specifications
165 MHz
1.2 volts p-p
5 volts p-p (TTL)
1080 / 1920 x 1200
DVI-I 29 pin female
Video Amplifier
Bandwidth Input
Video Signal Input
DDC Signal Single
Link Range DVI
Connector
Control
RS-232, DB9 female connector
5VDC-3A
17”W x 1.75”H x 7”D
4.05 lbs.
Pin #Signal Pin # Signal
T.M.D.S Data 2+
T.M.D.S Data 2/4 Shield
16 Hot Plug Detect
17 T.M.D.S Data 0
18 T.M.D.S Data 0+
T.M.D.S Data 4+
Analog Vert. Sync
19 T.M.D.S Data 0/5 Shield
20 T.M.D.S Data 5
21 T.M.D.S Data 5+
22 T.M.D.S Clock Shield 23
T.M.D.S Clock+
24 T.M.D.S Clock
10 T.M.D.S Data 1+
11 T.M.D.S Data 1/3 Shield
12 T.M.D.S Data 3
13 T.M.D.S Data 3+
C1 Analog Red
C2 Analog Green C3
Analog Blue
C4 Analog Horz Sync
C5 Analog Ground
14 +5V Power
15 GND
Stretch Any DVI D Source Across
Four DVI or VGA Screens

Introduction
Features
What’s in the box?
Installation Diagram
StretcherPro Installation Diagram
Getting Started
Hardware Installation
1. Ensure the power supply for the PC is disconnected.
2. Connect the DVI output from the PC to the Input 1 port
on the rear panel, using a DVI-D cable.
3. Connect the four displays to the output ports on the rear
panel, using a DVI-D cable for DVI monitors or DVI/VGA
adapters for VGA displays.
4. Connect the power adapter to the unit.
5. Power up the PC.
When powered on, StretcherPro will carry out a self test. If
the test is successful, the LCD on the front panel will
recognize the digital video input.
Description Part Number
UX-Stretcher: Expand any DVI-D
among 4 DVI-I screens.
Includes: [UXST4, (CCPWR06)]
SmartAVI’s StretcherPro is a dynamic, real-time
video wall system that will soon have you stretch-
ing high-definition images and video over four
screens, creating a fantastic and eye-catching
presentation for your customers or clients in no
time.
This video wall system controller can take any
DVI-D source and stretch it across four VGA or DVI
screens. You will find that this device supports the
highest resolution available (1920 x 1200) for
single-link DVI-D.
As you explore StretcherPro, you will see that each
of your screens can display ¼ of a selected image in
a 2x2 format, using real-time scaling.
In addition to using your new StretcherPro to
control a four-screen display, this hardware is fully
expandable to manage as many as 128 screens,
making it the perfect solution for entry-level display
walls, all the way up to industrial deployments
(when used in conjunction with SmartAVI’s video
wall systems).
 6XSSRUWV '9,' ,QSXW
 6XSSRUWV 0XOWLSOH '&& 7DEOHV
 +LJK'HILQLWLRQ 5HVROXWLRQV XS WR  [ 
Supported
 2XWSXWV WR )RXU 6FUHHQV (DFK 6KRZLQJ ô RI WKH
9*$ ,PDJH [ )RUPDW
 6XSSRUWV $QDORJ DQG '9, /&' 'LVSOD\V
 6WDQG$ORQH 8QLW QR $GGLWLRQDO
Hardware/Software to be Installed on Your
Computer
 0XOWLSOH 8QLWV &DQ EH /LQNHG IRU /DUJHU :DOO
Configuration
Controlling StretcherPro
StretcherPro is controlled manually via the LCD display
screen on the front panel of the unit.
Supports Multiple DCC Tables
A DCC table is a “list” of supported resolutions that the
computer uses to communicate with the display
VFUHHQV 7KHUH DUH GLIIHUHQW '&& WDEOHV IRU 3&V YV 0DF
(as well as other hardware systems on the market).
StretcherPro is equipped to emulate each of these
tables, allowing it to work with whatever type of
computer hardware you wish to run your digital
signage from.
StretcherPro Learning Mode
SmartAVI’s StretcherPro “learns” the specifications of
any monitor connected to it. This gives the hardware
the ability to emulate the monitors even if none are
FRQQHFWHG DW D ODWHU WLPH 0DQ\ FRQWURO
computers/routers won’t power up properly (or at all)
without the display monitors attached at all times.
StretcherPro’s capacity to learn and remember the
display monitors allows you the freedom to work on
your content management/scheduling without being
plugged in and powered up to your entire digital
signage network every time you want to make a
change or work on a new presentation.
To enter learning mode, simply hold both front panel
buttons down simultaneously for a moment and the
´6HWXS 0HQXµ ZLOO FRPH XS RQ WKH /&' VFUHHQ
By pressing the Scroll button, you can cycle through
the unit’s learning options. When the desired learning
PRGH LV GLVSOD\HG SUHVV WKH (QWHU EXWWRQ WKLV ZLOO
execute the selected learning feature and will return
the router to normal operation.
Practical Applications
 ,QIRUPDWLRQDO 'LVSOD\V
 &RPPDQG &HQWHUV
 &RQWURO 5RRPV
 6LPXODWLRQ 6\VWHPV
 +RXVHV RI :RUVKLS
 &RQYHQWLRQ )DFLOLWLHV
 7KHPH 3DUNV
 5HVRUWV
&DVLQRV
UXST4S
StretcherPro
DVI Cab e
DVI Cable
DVI Splitter