SMART Board SPNL-6365-V3/SBID-6365 Product manual

Was this document helpful?
smarttech.com/docfeedback/171167
SMARTBoard® 6000 and
6000Proseries
interactive displays
INSTALLATION AND MAINTENANCE GUIDE
SPNL-6365-V3/SBID-6365 |SPNL-6265-V3/SBID-6265 |SPNL-6065-V3/SBID-6065
SPNL-6365-V2 |SPNL-6375 |SPNL-6265-V2 |SPNL-6275 |SPNL-6065-V2 |SPNL-6075 |SPNL-6055 |SPNL-6065
SPNL-6365P |SPNL-6375P |SPNL-6265P |SPNL-6275P |SPNL-6065P |SPNL-6075P

smarttech.com/kb/171167
Learn more
This guide and other resources for SMARTBoard 6000 and 6000 Pro series
interactive displays are available in the Support section of the
SMARTwebsite (smarttech.com/support). Scan this QRcode to view these
resources on your mobile device.
この装 置 は、クラスA情 報 技 術 装 置 です。この装 置 を家 庭 環 境 で使 用 すると電 波 妨 害 を引 き起 こすことがあります。この場 合 には使 用 者 が適 切 な対 策 を講 ずるよう要
求 されることがあります。
VCCI-A
Licenses
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
The Bluetooth word mark is owned by the Bluetooth SIG, Inc. and any use of such marks by SMARTTechnologiesULC is under license.
Trademark notice
SMARTBoard, SMARTNotebook, SMARTInk, SMARTkapp, SMARTkappiQ, DViT, PenID, smarttech, the SMART logo and all SMART taglines are trademarks or
registered trademarks of SMARTTechnologiesULC in the U.S. and/or other countries. Windows is either a registered trademark or trademark of Microsoft
Corporation in the United States and/or other countries. Apple, Mac, macOS, OSX, iPhone, iPad, iPod touch, iTunes, AirPlay and Bonjour are trademarks of Apple
Inc., registered in the U.S. and other countries. Google, Google Cast, Google Play, Android, Chrome, Chromebook and Chromecast are trademarks of Google
Inc. AirParrot is a trademark of Squirrels LLC registered in the United States and other countries. All other third-party product and company names may be
trademarks of their respective owners.
Copyright notice
© 2017–2018SMARTTechnologiesULC. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system
or translated into any language in any form by any means without the prior written consent of SMARTTechnologiesULC. Information in this manual is subject to
change without notice and does not represent a commitment on the part of SMART.
This product and/or use thereof is covered by one or more of the following U.S. patents:
www.smarttech.com/patents
11/2018

i smarttech.com/kb/171167
Important information
WARNING
lFailure to follow the installation instructions shipped with the display could result in injury
and product damage which may not be covered by the warranty.
lDo not open or disassemble the display. You risk electrical shock from the high voltage
inside the casing. Opening the casing also voids the warranty.
lDo not stand (or allow children to stand) on a chair to touch the surface of the display. Rather,
mount the product at the appropriate height.
lTo reduce the risk of fire or electric shock, do not expose the display to rain or moisture.
lIf the display requires replacement parts, make sure the service technician uses
replacement parts specified by SMARTTechnologies or parts with the same characteristics
as the original.
lEnsure that any cables that cross the floor to the display are properly bundled and marked
to avoid a trip hazard.
lDo not insert objects inside the cabinet ventilation holes, because they could touch
dangerous voltage points and cause electric shock, fire or product damage which may not
be covered by the warranty.
lDo not place heavy objects on the power cable. Damage to the cable could cause shock,
fire or product damage which may not be covered by the warranty.
lUseonly extension cords and outlets that can fully accommodate the display’s polarized
plug.
lUse the power cable provided with the display. If a power cable is not supplied, contact
your supplier. Use only power cables that match the AC voltage of the power outlet and that
comply with your country’s safety standards.
lIf the glass is broken, do not touch the liquid crystal. To prevent injury, handle glass
fragments with care when disposing of them.
lDo not move or mount the display by connecting rope or wire to its handles. The display is
heavy, and failure of the rope, wire or handle could lead to injury.
lUse only VESA®-approved mounts.

IMPORTANT INFORMATION
ii smarttech.com/kb/171167
lDisconnect all of the display’s power cables from the wall outlet and seek assistance from
qualified service personnel if any of the following occur:
oThe power cable or plug is damaged
oLiquid is spilled into the display
oObjects fall into the display
oThe display is dropped
oStructural damage, such as cracking, occurs
oThe display behaves unexpectedly when you follow operating instructions
CAUTION
lBefore you clean the display’s screen, shut down or disconnect the computer. Otherwise,
you may scramble the desktop icons or inadvertently activate applications when you wipe
the screen.
lAvoid setting up and using the display in an area with excessive levels of dust, humidity and
smoke.
lDust buildup on the camera windows and reflective tape will degrade touch performance.
SMART recommends that you inspect the camera windows and reflective tape for buildup
and clean weekly.
lMake sure an electrical socket is near the display and remains easily accessible during use.
lThe display should be used only with European TN and TT power distribution systems.
It is not suitable for older, IT-type power distribution systems found in some European
countries. “This system (IT-type) is widely used isolated from earth, in some installations in
France, with impedance to earth, at 230/400V, and in Norway, with voltage limiter, neutral
not distributed, at 230V line-to-line.” (IEC 60950:1999)
Contact qualified personnel if you’re uncertain of the type of power system available where
you’re installing the display.
lThe accessory slot’s maximum available power is 60 W. The slot is not a limited power
source. To reduce the risk of fire, make sure that accessories connecting to the slot satisfy
the fire enclosure requirements of IEC60950-1.
lYou must connect the USB cable that came with the display to a computer that has a USB
compliant interface and that bears the USB logo. In addition, the USB source computer must
be compliant with CSA/UL/EN 60950 and bear the CE mark and CSA and/or UL Mark(s) for
CSA/UL 60950. This is for operating safety and to avoid damage to the display.

IMPORTANT INFORMATION
iii smarttech.com/kb/171167
IMPORTANT
lThe following are the normal operating power requirements for the display:
Model Power requirements
SPNL-6000-V3/SBID-6000 models
SPNL-6365-V3/SBID-6365 100V to 240V AC, 50 Hz to 60 Hz, 92 W
SPNL-6265-V3/SBID-6265 100V to 240V AC, 50 Hz to 60 Hz, 92 W
SPNL-6065-V3/SBID-6065 100V to 240V AC, 50 Hz to 60 Hz, 83 W
SPNL-6000-V2 models
SPNL-6365-V2 100V to 240V AC, 50 Hz to 60 Hz, 113 W
SPNL-6375 100V to 240V AC, 50 Hz to 60 Hz, 190 W
SPNL-6265-V2 100V to 240V AC, 50 Hz to 60 Hz, 113 W
SPNL-6275 100V to 240V AC, 50 Hz to 60 Hz, 190 W
SPNL-6065-V2 100V to 240V AC, 50 Hz to 60 Hz, 110 W
SPNL-6075 100V to 240V AC, 50 Hz to 60 Hz, <131 W
SPNL-6000-V1 models
SPNL-6055 90V to 240V AC, 50 Hz to 60 Hz, 130 W
SPNL-6065 100V to 240V AC, 50 Hz to 60 Hz, 200 W
SPNL-6000P models
SPNL-6365P 100V to 240V AC, 50 Hz to 60 Hz, 113 W
SPNL-6375P 100V to 240V AC, 50 Hz to 60 Hz, 190 W
SPNL-6265P 100V to 240V AC, 50 Hz to 60 Hz, 113 W
SPNL-6275P 100V to 240V AC, 50 Hz to 60 Hz, 190 W
SPNL-6065P 100V to 240V AC, 50 Hz to 60 Hz, 110 W
SPNL-6075P 100V to 240V AC, 50 Hz to 60 Hz, <131 W
lFor additional requirements and other information, refer to the display’s specifications (see
More information on page13).