SMART Board 8000 series User manual

Using touch gestures
Touch technology
When you use the SMART Board™ interactive flat panel or interactive whiteboard, you can perform touch and multitouch
gestures on the interactive surface to control software applications.
SMART Board 8000 series interactive flat panel
Two people can work together anywhere on the interactive surface.
SMART Board 800 series interactive whiteboard
Two people can work together anywhere on the interactive surface.
Click (in Select mode)
Quickly tap your finger on the interactive surface.
Double click (in Select mode)
Quickly tap the interactive surface twice in the
same spot.
Using touch gestures

Using touch gestures
Page 2 of 4
Right-click (in Select mode)
Press and hold your finger on the interactive surface for
three seconds.
Press the Right-Click button on the SMART Pen Tray.
OR
Erase (in any mode)
Use your flattened hand, palm or fist to press the
interactive surface and move your hand across the area
you want to erase.
Use the eraser tool in the SMART Pen Tray.
OR

Using multitouch gestures
Page 3 of 4
Using touch gestures
Drag (in Select mode)
Move your fingertip over the interactive surface
without losing contact.
Flick (in Select mode)
Quickly brush the interactive surface with
your fingertip.
To enable gestures
1. Open the system’s Control Panel and select SMART Board.
2. Press SMART Hardware Settings.
3. From the dropdown menu, select Mouse and Gesture Settings from the list.
4. Select Enable Multi-Touch Gestures.
5. If you haven’t done so already, select Multitouch Mode.
6. Press OK to close the Control Panel.

© 2013 SMART Technologies ULC. All rights reserved. SMART Board, SMART Notebook, smarttech, the SMART logo and all SMART taglines are trademarks or registered
trademarks of SMART Technologies ULC in the U.S. and/or other countries. All other third-party product and company names may be trademarks of their respective
owners. Printed in Canada 07/2013
Page 4 of 4
Zoom out (in Pan mode)
Touch the interactive surface with two fingers
and bring them closer together.
Zoom in (in Pan mode)
Touch the interactive surface with two fingers
and move them apart.
Rotate (in Select mode)
Touch the interactive surface with two fingers
and move them in a clockwise or counter-
clockwise direction.
Using touch gestures