Smartrise C4 User manual

se Engineering

Page intentionally left blank

C4 User Manual
August 15, 2019 ©2019 Smartrise Engineering, Inc. All Rights Reserved Page i
Document History
Date Version Summary of Changes
March 28, 2019
1.0
Initial Submittal
August 15, 2019
2.0
Updated cover page
Added Menu Structures
Added Soft Limit
Added Sabbath Operation
Added Load Weigher
Added Alarms
Added In-depth process descriptions
Added NTS/ETS
Added Profile, Parameters, and Controlling Initial Start of
Car Motion information to S-Curve
Deleted Faults table and added reference to see C4 Faults
and Alarms document

C4 User Manual
Page ii © 2019 Smartrise Engineering, Inc. All Rights Reserved August 15, 2019
Page intentionally left blank

C4 User Manual
August 15, 2019 ©2019 Smartrise Engineering, Inc. All Rights Reserved Page iii
Table of Contents
1C4 Traction Controller....................................................................................1
1.1 Overview...................................................................................................................... 1
1.2 C4 Traction Controller Components.............................................................................. 2
1.3 Safety........................................................................................................................... 4
1.4 Default Voltage Settings Prior to Installation................................................................. 5
2Controller Hardware ......................................................................................6
2.1 MR Board SR3032 ........................................................................................................ 7
2.2 Navigation Buttons....................................................................................................... 9
2.3 24 VDC Power Source..................................................................................................10
2.4 Reset Buttons..............................................................................................................10
2.5 Drive Communication..................................................................................................11
2.6 Network ......................................................................................................................12
2.7 120 VAC Inputs and Outputs (Factory).........................................................................13
2.8 24 VDC Inputs and Outputs .........................................................................................14
2.9 24 VDC Monitoring System..........................................................................................15
2.10 Safety String Inputs 120 VAC .......................................................................................16
2.11 120 VAC Inputs and Outputs (Field) .............................................................................18
2.12 Hall Lock Connections..................................................................................................20
2.13 Inspection Controls .....................................................................................................21
2.14 Safety Relays ...............................................................................................................22
2.15 SRU Board SR3030.......................................................................................................24
2.16 IO Board/Riser Board SR3031 ......................................................................................26
2.17 Hall Board SR1060.......................................................................................................28
2.18 Brake Board SR3038 ....................................................................................................29
3Menu Structure............................................................................................31
3.1 Status, Faults, and Alarms............................................................................................31
3.2 Setup ..........................................................................................................................34
3.3 Debug and About ........................................................................................................59
4Construction Mode ......................................................................................62
4.1 Main Power Setup.......................................................................................................62

C4 User Manual
Page iv © 2019 Smartrise Engineering, Inc. All Rights Reserved August 15, 2019
4.2 MR Board Connection .................................................................................................64
4.3 Brake Board Settings ...................................................................................................66
4.4 Adjust Brake Using the Onboard UI..............................................................................66
4.5 Drive Setup .................................................................................................................68
5Inspection Mode..........................................................................................69
5.1 Standard Modes of Inspection.....................................................................................69
5.2 Inspection Run Options and Adjustments ....................................................................70
6Adjusting S-Curve.........................................................................................72
6.1 Profile .........................................................................................................................73
6.2 Setting Pattern Parameters .........................................................................................74
6.3Controlling Initial Start of Car Motion ..........................................................................75
Pre-Torque Adjustments ......................................................................................... 75
Brake adjustment .................................................................................................... 76
Synthetic Speed Torque .......................................................................................... 76
6.4 Adjusting Run Timers...................................................................................................76
7SmartPositioning Landing System.................................................................80
7.1 Tape............................................................................................................................80
7.2 Camera Assembly........................................................................................................82
7.3 Tape Clip Assembly......................................................................................................85
7.4 Tape Mount Assembly.................................................................................................88
7.5 Upper Tape Mount Assembly ......................................................................................89
7.6 Lower Tape Mount Assembly ......................................................................................91
7.7 Emergency Tape Break (ETB) Switch Assembly ............................................................92
7.8 Camera Alignment.......................................................................................................94
7.9 Fine Tune ....................................................................................................................94
7.10 Alignment ...................................................................................................................95
8Reduced Stroke Buffer .................................................................................97
9Learn Speed .................................................................................................99
10 Learning the Hoistway................................................................................100
11 NTS/ETS .....................................................................................................103
12 Floors.........................................................................................................104

C4 User Manual
August 15, 2019 ©2019 Smartrise Engineering, Inc. All Rights Reserved Page v
12.1 Floor Adjustment ......................................................................................................104
12.2 Floor Openings..........................................................................................................105
12.3 Front Floor Openings.................................................................................................105
12.4 Rear Floor Openings ..................................................................................................106
12.5 Opening Map Status..................................................................................................107
12.6 Front Opening Map Status.........................................................................................107
12.7 Rear Opening Map Status..........................................................................................108
12.8 Security Setting .........................................................................................................109
12.9 Front Security............................................................................................................109
12.10 Rear Security.............................................................................................................109
12.11 Security Map Status...................................................................................................110
12.12 Front Security Map Status .........................................................................................110
12.13 Rear Security Map Status...........................................................................................111
12.14 Paired Hall Call Map Status........................................................................................111
12.15 Sabbath Operation ....................................................................................................112
13 Car Calls .....................................................................................................122
14 Doors .........................................................................................................123
15 Car Data.....................................................................................................124
15.1 Car Status Overview ..................................................................................................124
15.2 Front Door State........................................................................................................126
15.3 Rear Door State.........................................................................................................126
16 Hall Network ..............................................................................................127
16.1 CAN Bus ....................................................................................................................127
16.2 DIP Switch Settings....................................................................................................128
16.3 Hall Board Status .......................................................................................................128
16.4 Errors........................................................................................................................130
16.5 Hall Call Masks ..........................................................................................................130
16.6 Hall Call Mask Status .................................................................................................132
16.7 Pairing Hall Buttons ...................................................................................................132
16.8 Compatibility.............................................................................................................133
17 Serial Hall Lanterns ....................................................................................134

C4 User Manual
Page vi © 2019 Smartrise Engineering, Inc. All Rights Reserved August 15, 2019
17.1 CAN BUS....................................................................................................................134
17.2 Serial Hall Lantern Hall Board Status..........................................................................134
17.3 Errors........................................................................................................................135
17.4 Hall Lantern Masks ....................................................................................................135
18 C4 Data Acquisition Device (D.A.D) Unit .....................................................136
18.1 Wireless Connection to D.A.D Unit ............................................................................136
18.2 Uploading Revision Board Software ...........................................................................136
18.3 Troubleshooting........................................................................................................137
19 Assigning Inputs and Outputs.....................................................................138
19.1 Adding an Input or Output.........................................................................................138
19.2 Removing an Input or Output ....................................................................................139
19.3 Type of Inputs ...........................................................................................................140
19.4 Types of Outputs.......................................................................................................142
20 Installing a New Board ...............................................................................145
20.1 Retain Parameters for a Replaced MR Board .............................................................145
20.2 Retain Parameters for a Replaced CT or COP Board ...................................................145
21 Manual Traction Rescue.............................................................................147
21.1 Manual Rescue Test Operation..................................................................................147
22 Hoistway Access.........................................................................................148
22.1 Soft Limit...................................................................................................................152
23 Swing Operation ........................................................................................154
23.1 Configuring Swing Operation Input............................................................................154
23.2 Calls Enable Swing .....................................................................................................155
23.3 Stay Active in Group ..................................................................................................156
23.4 Idle Timer..................................................................................................................156
24 Emergency.................................................................................................158
24.1 Emergency Power .....................................................................................................158
24.2 Fire ...........................................................................................................................158
24.3 Earthquake................................................................................................................159
25 Load Weigher.............................................................................................161
25.1 Calibration ................................................................................................................163

C4 User Manual
August 15, 2019 ©2019 Smartrise Engineering, Inc. All Rights Reserved Page vii
25.2 Verification of Load Weigher .....................................................................................178
25.3 Monthly Recalibration ...............................................................................................180
26 Debug ........................................................................................................183
26.1 View Debug...............................................................................................................183
27 Faults .........................................................................................................185
28 Alarms........................................................................................................187

C4 User Manual
Page viii © 2019 Smartrise Engineering, Inc. All Rights Reserved August 15, 2019
List of Figures
Figure 1: C4 Controller...................................................................................................................................................2
Figure 2: Car Operating Panel Controller.......................................................................................................................3
Figure 3: Car Top Controller ..........................................................................................................................................3
Figure 4: SmartPositioning Landing System...................................................................................................................4
Figure 5: Ground Bus Terminal Blocks...........................................................................................................................5
Figure 6: MR Board SR3032 ...........................................................................................................................................7
Figure 7: Navigation Buttons .........................................................................................................................................9
Figure 8: Example of Selected Menu ...........................................................................................................................10
Figure 9: 24 VDC Connector.........................................................................................................................................10
Figure 10: Reset Switches ............................................................................................................................................11
Figure 11: Drive Communication Connector ...............................................................................................................11
Figure 12: CN Connector..............................................................................................................................................12
Figure 13: CAN 1,2,3 Network Connector....................................................................................................................13
Figure 14: 120 VAC Connector.....................................................................................................................................14
Figure 15: 24 VDC Input Connector .............................................................................................................................14
Figure 16: 24 VDC Output Connector ..........................................................................................................................15
Figure 17: 24 VDC Monitoring System Connector .......................................................................................................16
Figure 18: Safety String Input Connector ....................................................................................................................18
Figure 19: 120 VAC Input and Output Connector........................................................................................................19
Figure 20: Hall Lock Connector ....................................................................................................................................21
Figure 21: MR Board SR3032 Inspection Control ........................................................................................................22
Figure 22: MR Board SR3032 Safety Relays .................................................................................................................23
Figure 23: SRU Board SR3030 ......................................................................................................................................25
Figure 24: IO Board/Riser Board SR3031 .....................................................................................................................27
Figure 25: Hall Board SR1060 ......................................................................................................................................28
Figure 26: Brake Board SR3038 ...................................................................................................................................29
Figure 27: Status, Faults, and Alarms Menus ..............................................................................................................31
Figure 28: Setup – Setup I/O, Safety, and Run Timers Menus.....................................................................................34
Figure 29: Setup – Door Setup, S-Curve, and Speeds Menus ......................................................................................38
Figure 30: Setup – Drive Setup, Brake Setup, Floors, and Calls Menus.......................................................................43
Figure 31: Setup – Hoistway Access, Fire, and Earthquake Menus .............................................................................47
Figure 32: Setup – Miscellaneous, NTS, and Load Weigher Menus.............................................................................51
Figure 33: Setup – Group Setup, Flood, EMS, Sabbath, Swing, Attendant, and E-Power Menus................................55
Figure 34: Debug and About Menus............................................................................................................................59
Figure 35: Breakers in the OFF Position.......................................................................................................................62
Figure 36: L1/L2 Breaker..............................................................................................................................................63
Figure 37: Control Panel ..............................................................................................................................................63
Figure 38: MAIN MENU – Setup ..................................................................................................................................65
Figure 39: SETUP MENU – Miscellaneous....................................................................................................................65
Figure 40: MISC Menu – Enable Const. Box.................................................................................................................65

C4 User Manual
August 15, 2019 ©2019 Smartrise Engineering, Inc. All Rights Reserved Page ix
Figure 41: ENABLE CONTS.BOX MENU ........................................................................................................................66
Figure 42: SETUP Menu – Brake Setup ........................................................................................................................67
Figure 43: BRAKE SETUP Menu – Primary Setup .........................................................................................................67
Figure 44: PRIMARY SETUP Menu – Pick Voltage ........................................................................................................67
Figure 45: BRAKE PICK VOLTAGE Menu.......................................................................................................................67
Figure 46: MR INSPECTION Switch ..............................................................................................................................69
Figure 47: Car Run Box.................................................................................................................................................69
Figure 48: SETUP Menu – Speeds ................................................................................................................................70
Figure 49: SPEEDS Menu – Inspection Speed ..............................................................................................................70
Figure 50: INSPECTION SPEED Menu...........................................................................................................................71
Figure 51: Graphical Representation of an S-Curve.....................................................................................................72
Figure 52: SETUP Menu – S-Curve ...............................................................................................................................73
Figure 53: S-CURVE Menu – Inspection Profile............................................................................................................73
Figure 54: INSPECTION PROFILE Menu........................................................................................................................73
Figure 55: SETUP Menu – Run Timers .........................................................................................................................77
Figure 56: TIMERS Menu .............................................................................................................................................78
Figure 57: START TIMERS Menu ..................................................................................................................................78
Figure 58: STOP TIMERS Menu ....................................................................................................................................78
Figure 59: Coded Tape.................................................................................................................................................80
Figure 60: Gloves Required..........................................................................................................................................80
Figure 61: Dispense Tape.............................................................................................................................................81
Figure 62: Routing Tape...............................................................................................................................................81
Figure 63: Camera Assembly .......................................................................................................................................82
Figure 64: Sensor Assembly .........................................................................................................................................82
Figure 65: Unistrut Installation....................................................................................................................................83
Figure 66: Sensor Shelf Assembly to Car Top Frame ...................................................................................................84
Figure 67: Alternate Unistrut Installation....................................................................................................................85
Figure 68: Tape Clip Assembly .....................................................................................................................................85
Figure 69: Tape Clip Insertion ......................................................................................................................................86
Figure 70: Optical Axis .................................................................................................................................................86
Figure 71: Tape Clip Assembly Placement (Rear View) ...............................................................................................87
Figure 72: Tape Clip Assembly Alignment ...................................................................................................................87
Figure 73: Tape Clip Assembly Alignment ...................................................................................................................88
Figure 74: Tape Mount Assembly................................................................................................................................89
Figure 75: Upper Tape Unistrut Installation ................................................................................................................90
Figure 76: Hardware ....................................................................................................................................................90
Figure 77: Gap Verification ..........................................................................................................................................91
Figure 78: Lower Tape Mount Assembly .....................................................................................................................91
Figure 79: Hardware to Lower Tape Mount Assembly ................................................................................................92
Figure 80: Emergency Tape Break Switch in Series with Buffer Switch.......................................................................92
Figure 81: Unistrut to Lower Tape Mount Assembly...................................................................................................93
Figure 82: Emergency Tape Break Switch....................................................................................................................94

C4 User Manual
Page x © 2019 Smartrise Engineering, Inc. All Rights Reserved August 15, 2019
Figure 83: RJ45 Connection .........................................................................................................................................94
Figure 84: Camera LEDs ...............................................................................................................................................95
Figure 85: Alignment Arrows .......................................................................................................................................96
Figure 86: SETUP Menu – Safety .................................................................................................................................97
Figure 87: SAFETY Menu – ETSL...................................................................................................................................97
Figure 88: ETSL Menu – Rated Buffer Speed ...............................................................................................................97
Figure 89: RATED BUFFER SPEED Menu ......................................................................................................................98
Figure 90: ETSL Menu – Buffer Distance......................................................................................................................98
Figure 91: BUFFER DISTANCE Menu ............................................................................................................................98
Figure 92: SPEEDS Menu – Learn Speed ......................................................................................................................99
Figure 93: LEARN SPEED Menu ....................................................................................................................................99
Figure 94: Check Status by Main Screen Method......................................................................................................100
Figure 95: MAIN MENU – Status................................................................................................................................100
Figure 96: STATUS Menu – Inputs .............................................................................................................................101
Figure 97: INPUTS BY FUNCTION Menu – Doors .......................................................................................................101
Figure 98: DOORS Menu ............................................................................................................................................101
Figure 99: Normal to Hold UP/DN To Start................................................................................................................101
Figure 100: Learn Complete ......................................................................................................................................102
Figure 101: SETUP Menu – Floors..............................................................................................................................104
Figure 102: FLOORS Menu – Too High/Too Low........................................................................................................104
Figure 103: ADJUST FLOORS Menu............................................................................................................................105
Figure 104: FLOOR Menu – Openings Front ..............................................................................................................105
Figure 105: FLOOR OPENING (FRONT DOOR) Menu .................................................................................................106
Figure 106: FLOOR Menu – Openings Rear ...............................................................................................................106
Figure 107: FLOOR OPENING (REAR DOOR) Menu ....................................................................................................106
Figure 108: MAIN Menu – Debug ..............................................................................................................................107
Figure 109: DEBUG Menu – Car Data ........................................................................................................................107
Figure 110: Car Data Overview Status .......................................................................................................................107
Figure 111: Hall Mask Status .....................................................................................................................................108
Figure 112: Front Opening Map Status......................................................................................................................108
Figure 113: Rear Opening Map Status.......................................................................................................................108
Figure 114: FLOORS Menu – Security ........................................................................................................................109
Figure 115: SECURITY FLOORS (FRONT DOOR) Menu ...............................................................................................109
Figure 116: FLOORS Menu – Rear Security................................................................................................................110
Figure 117: SECURITY FLOORS (REAR DOOR) Menu ..................................................................................................110
Figure 118: Front Security Map Status ......................................................................................................................111
Figure 119: Rear Security Map Status........................................................................................................................111
Figure 120: Paired Hall Call Mask Status ...................................................................................................................112
Figure 121: SETUP I/O Menu – Setup I/O ..................................................................................................................114
Figure 122: SETUP I/O Menu – Setup Inputs .............................................................................................................114
Figure 123: SELECT BOARD Menu – Machine Room .................................................................................................114
Figure 124: Input Menu .............................................................................................................................................114

C4 User Manual
August 15, 2019 ©2019 Smartrise Engineering, Inc. All Rights Reserved Page xi
Figure 125: SETUP Menu – Sabbath ..........................................................................................................................115
Figure 126: SABBATH Menu – Key Enable Only.........................................................................................................115
Figure 127: KEY ENABLE ONLY Menu.........................................................................................................................115
Figure 128: SABBATH Menu – Floors Opening (F) .....................................................................................................116
Figure 129: Floors Opening (Front) Menu .................................................................................................................116
Figure 130: SABBATH Menu – Floors Opening (R).....................................................................................................116
Figure 131: Floors Openings (Rear) Menu.................................................................................................................117
Figure 132: SABBATH Menu – Destinations Up .........................................................................................................117
Figure 133: UP DESTINATIONS Menu ........................................................................................................................117
Figure 134: SABBATH Menu – Destinations Down ....................................................................................................118
Figure 135: DOWN DESTINATION Menu ...................................................................................................................118
Figure 136: SABBATH Menu – Timer Enable Only .....................................................................................................118
Figure 137: TIMER ENABLE ONLY Menu ....................................................................................................................119
Figure 138: SABBATH Menu – Friday Start Time .......................................................................................................119
Figure 139: FRIDAY START TIME Menu......................................................................................................................119
Figure 140: SABBATH Menu – SATURDAY END Time.................................................................................................120
Figure 141: SATURDAY END TIME Menu ...................................................................................................................120
Figure 142: SABBATH Menu – Door Dwell Time........................................................................................................120
Figure 143: DOOR DWELL TIMER Menu ....................................................................................................................120
Figure 144: SABBATH Menu – Key or Timer Enable ..................................................................................................121
Figure 145: Key or Timer Enable Menu .....................................................................................................................121
Figure 146: SETUP Menu – Car Calls..........................................................................................................................122
Figure 147: ENTER CAR CALLS Menu – Front or Rear ................................................................................................122
Figure 148: ENTER CAR CALL Menu ...........................................................................................................................122
Figure 149: SETUP Menu – Door Setup .....................................................................................................................123
Figure 150: Car Data Overview Status .......................................................................................................................124
Figure 151: Standard CAN Bus...................................................................................................................................127
Figure 152: STATUS MENU – Hall Board Status.........................................................................................................129
Figure 153: Hall Board Status for the 64th Landing....................................................................................................129
Figure 154: Uninitialized Hall Board Status ...............................................................................................................129
Figure 155: DEBUG Menu – Edit Parameters ............................................................................................................130
Figure 156: PARAMETER EDIT Menu – Decimal Format............................................................................................131
Figure 157: EDIT AS BINARY Menu ............................................................................................................................131
Figure 158: PARAMETER EDIT Menu – Hex Format...................................................................................................133
Figure 159: STATUS MENU – Hall Lantern Status ......................................................................................................134
Figure 160: Hall Lantern Status for the 64th Landing .................................................................................................135
Figure 161: Uninitialized Hall Lantern Status.............................................................................................................135
Figure 162: SETUP I/O Menu –Setup Outputs ...........................................................................................................138
Figure 163: Unused Input/Output .............................................................................................................................138
Figure 164: Category and Input .................................................................................................................................139
Figure 165: SETUP Menu – Hoistway Access .............................................................................................................148
Figure 166: HOISTWAY ACCESS – Allowed Distance (Top) ........................................................................................148

C4 User Manual
Page xii © 2019 Smartrise Engineering, Inc. All Rights Reserved August 15, 2019
Figure 167: ALLOWED DISTANCE – TOP Menu ..........................................................................................................149
Figure 168: HOISTWAY ACCESS – Top Floor ..............................................................................................................149
Figure 169: TOP FLOOR Menu ...................................................................................................................................149
Figure 170: HOISTWAY ACCESS – Top Opening .........................................................................................................150
Figure 171: TOP OPENING Menu...............................................................................................................................150
Figure 172: HOISTWAY ACCESS – Allowed Distance (Bottom) ..................................................................................150
Figure 173: ALLOWED DISTANCE – BOTTOM Menu ..................................................................................................150
Figure 174: HOISTWAY ACCESS – Bottom Floor ........................................................................................................151
Figure 175: BOTOM FLOOR Menu .............................................................................................................................151
Figure 176: HOISTWAY ACCESS – Bottom Opening...................................................................................................151
Figure 177: BOTTOM OPENING Menu.......................................................................................................................152
Figure 178: S-CURVE Menu – Soft Limit Dist Up........................................................................................................152
Figure 179: SOFT LIMIT DIST UP Menu......................................................................................................................153
Figure 180: S-CURVE Menu – Soft Limit Dist Down ...................................................................................................153
Figure 181: SOFT LIMIT DIST DOWN Menu ...............................................................................................................153
Figure 182: Input Menu – Enable Swing....................................................................................................................154
Figure 183: SETUP Menu – Swing ..............................................................................................................................155
Figure 184: SWING Menu – Calls Enable Swing.........................................................................................................155
Figure 185: SWING ENABLE Menu.............................................................................................................................155
Figure 186: SWING Menu – Stay In Group.................................................................................................................156
Figure 187: STAY IN GROUP Menu ............................................................................................................................156
Figure 188: SWING Menu – Idle Timer ......................................................................................................................157
Figure 189: IDLE TIMER Menu ...................................................................................................................................157
Figure 190: SETUP Menu – Fire .................................................................................................................................158
Figure 191: FIRE SERVICE Menu – MR Smoke ...........................................................................................................159
Figure 192: MR SMOKE Menu – Shunt Trip...............................................................................................................159
Figure 193: MR: SHUNT ON RECALL Menu ................................................................................................................159
Figure 194: SETUP Menu – Earthquake .....................................................................................................................160
Figure 195: EARTHQUAKE Menu – Enable Eq............................................................................................................160
Figure 196: ENABLE EQ Menu....................................................................................................................................160
Figure 197: SETUP Menu – Load Weigher .................................................................................................................161
Figure 198: LOAD WEIGHER SETUP Menu – Enter Requests.....................................................................................161
Figure 199: LOAD CELL Menu – Initial Value .............................................................................................................162
Figure 200: LOAD CELL Menu – New Load Cell Value................................................................................................162
Figure 201: LOAD WEIGHER SETUP Menu – Type Select...........................................................................................163
Figure 202: LOCATION SELECT Menu – Serial MR .....................................................................................................163
Figure 203: LOCATION SELECT Menu – SERIAL CT.....................................................................................................164
Figure 204: LOAD WEIGHER SETUP Menu – Debug...................................................................................................164
Figure 205: DEBUG LWD Menu .................................................................................................................................164
Figure 206: LOAD WEIGHER SETUP Menu – Enable WiFi ..........................................................................................165
Figure 207: ENABLE WIFI Menu.................................................................................................................................165
Figure 208: MAX CAPACITY Menu .............................................................................................................................165

C4 User Manual
August 15, 2019 ©2019 Smartrise Engineering, Inc. All Rights Reserved Page xiii
Figure 209: CW PERCENT Menu ................................................................................................................................166
Figure 210: ROPE COUNT Menu ................................................................................................................................167
Figure 211: ROPE DIAMETER Menu...........................................................................................................................167
Figure 212: TORQUE OFFSET Menu...........................................................................................................................168
Figure 213: FULL LOAD LB Menu ...............................................................................................................................168
Figure 214: OVER LOAD LB Menu ..............................................................................................................................169
Figure 215: LOAD WEIGHER SETUP Menu – Trigger Recalibrate...............................................................................169
Figure 216: TRIGGER RECALIBRATE Menu – On ........................................................................................................169
Figure 217: TRIGGER RECALIBRATE Menu – Off ........................................................................................................170
Figure 218: LOAD WEIGHER SETUP Menu – Trigger Load Learn ...............................................................................170
Figure 219: TRIGGER LOAD LEARN Menu – On .........................................................................................................170
Figure 220: TRIGGER LOAD LEARN Menu – Off .........................................................................................................171
Figure 221: DEBUG Menu – Load Weigher................................................................................................................171
Figure 222: LOAD WEIGHER Menu – 100% ...............................................................................................................171
Figure 223: Request Menu – TORQUE SCALING........................................................................................................172
Figure 224: LOAD WEIGHER SETUP Menu – Torque Scaling......................................................................................172
Figure 225: TORQUE SCALING Menu.........................................................................................................................172
Figure 226: INSPECTION SPEED Menu.......................................................................................................................173
Figure 227: START TIMERS Menu – Accel Delay (Auto) .............................................................................................173
Figure 228: ACCEL DELAY (AUTO) Menu....................................................................................................................174
Figure 229: START TIMERS Menu – Accel Delay (Insp) ..............................................................................................174
Figure 230: ACCEL DELAY (INSP) Menu......................................................................................................................174
Figure 231: START TIMERS Menu – Brake Pick (Auto)...............................................................................................175
Figure 232: BRAKE PICK DELAY (AUTO) Menu ...........................................................................................................175
Figure 233: START TIMERS Menu – Brake Pick (Insp)................................................................................................175
Figure 234: BRAKE PICK DELAY (INSP) Menu .............................................................................................................175
Figure 235: (PRIMARY) BRAKE SETUP Menu – Ramp Time – Auto ............................................................................176
Figure 236: BRAKE RAMP TIME (AUTO) Menu ..........................................................................................................176
Figure 237: (PRIMARY) BRAKE SETUP) Menu – Ramp Time – Insp............................................................................176
Figure 238: BRAKE RAMP TIME (INSP) Menu ............................................................................................................177
Figure 239: BRAKE SETUP Menu – Secondary Setup .................................................................................................177
Figure 240: SECONDARY BRAKE SETUP Menu – Ramp Time .....................................................................................177
Figure 241: BRAKE RAMP TIME Menu .......................................................................................................................177
Figure 242: LOAD WEIGHER Menu Part 1 of 2...........................................................................................................179
Figure 243: LOAD WEIGHER Menu Part 2 of 2...........................................................................................................179
Figure 244: LOAD WEIGHER SETUP Menu – Auto Recalibrate ..................................................................................181
Figure 245: AUTO RECALIBRATE Menu – On .............................................................................................................181
Figure 246: LOAD WEIGHER SETUP Menu – Monthly Calibration Day......................................................................181
Figure 247: MONTHLY CALIBRATION DAY Menu.......................................................................................................181
Figure 248: LOAD WEIGHER SETUP Menu – Monthly Calibration Hour....................................................................182
Figure 249: MONTHLY CALIBRATION HOUR Menu....................................................................................................182
Figure 250: DEBUG Menu – View Debug Data ..........................................................................................................183

C4 User Manual
Page xiv © 2019 Smartrise Engineering, Inc. All Rights Reserved August 15, 2019
Figure 251: View Debug Data Menu..........................................................................................................................183
Figure 252: MAIN MENU – Faults ..............................................................................................................................185
Figure 253: FAULTS Menu – Clear Log.......................................................................................................................185
Figure 254: CLEAR FAULT LOG Menu – Clear Log ......................................................................................................185
Figure 255: MAIN MENU – Alarms ............................................................................................................................187
Figure 256: ALARMS Menu – Clear Log .....................................................................................................................187
Figure 257: CLEAR ALARM LOG Menu – Clear Log ....................................................................................................187

C4 User Manual
August 15, 2019 ©2019 Smartrise Engineering, Inc. All Rights Reserved Page xv
List of Tables
Table 1: MR Board SR3032 Bank A DIP Switch Setting Configuration ...........................................................................8
Table 2: MR Board SR3032 Bank B DIP Switch Setting Configuration ...........................................................................8
Table 3: Navigation Button descriptions .......................................................................................................................9
Table 4: SRU Board SR3030 Bank A DIP Switch Setting Configuration ........................................................................25
Table 5: SRU Board SR3030 Bank B DIP Switch Setting Configuration ........................................................................26
Table 6: IO Board SR3031 DIP Switch Settings ............................................................................................................27
Table 7: Hall Board SR1060 DIP Switch Settings ..........................................................................................................28
Table 8: Brake Board SR3038 DIP Switch Settings .......................................................................................................29
Table 9: Troubleshooting Tips .....................................................................................................................................29
Table 10: Status, Faults, and Alarm Menu Structures .................................................................................................32
Table 11: Setup – Setup I/O, Safety, and Run Timers Menu Structures......................................................................35
Table 12: Setup – Door Setup, S-Curve, and Speeds Menu Structures .......................................................................39
Table 13: Drive Setup, Brake Setup, Floors, and Calls Menu Structures .....................................................................44
Table 14: Hoistway Access, Fire, and Earthquake Menu Structures ...........................................................................48
Table 15: Miscellaneous, NTS, and Load Weigher Menu Structures...........................................................................52
Table 16: Group Setup, Flood, EMS, Sabbath, Swing, Attendant, and E-Power Menu Structures ..............................56
Table 17: Debug and About Menu Structures .............................................................................................................60
Table 18: Example of Data Settings .............................................................................................................................66
Table 19: Types of Start and End Run Timers ..............................................................................................................76
Table 20: Sabbath Parameters...................................................................................................................................112
Table 21: I/O That Affects Sabbath Operation ..........................................................................................................113
Table 22: Symbol for Each State ................................................................................................................................123
Table 23: Car Status Codes ........................................................................................................................................125
Table 24: Hall Board DIP Switch Settings...................................................................................................................128
Table 25: Hall Mask Mappings...................................................................................................................................131
Table 26: Hall Mask Status Definitions ......................................................................................................................132
Table 27: Types of Inputs per Category .....................................................................................................................140
Table 28: Types of Outputs per Category ..................................................................................................................142
Table 29: Inputs Used by the Controller for Emergency Power ................................................................................158
Table 30: LOAD WEIGHER Menu Definitions and Solutions ......................................................................................179
Table 31: Data Index for MR, CT, and COP Board Communication ...........................................................................184
Table 32: Faults Reported by Software or Hardware ................................................................................................186

C4 User Manual
Page xvi © 2019 Smartrise Engineering, Inc. All Rights Reserved August 15, 2019
Page intentionally left blank

C4 User Manual
August 15, 2019 © 2019 Smartrise Engineering, Inc. All Rights Reserved Page 1
1C4 Traction Controller
The C4 Traction Controller is the state-of-the-art high-speed/high-rise controller designed for
speeds up to 1400 fpm.
1.1 Overview
The C4 Traction Controller is built to learn and adapt.
The following is a list of C4 manuals included in the C4 package:
•C4 User Manual – A detailed description of the C4 Traction Controller including step by
step procedures on how to configure the system.
•C4 Faults and Alarms – A list of faults and alarm codes, and resolutions.
•C4 Testing Procedures – Step by step procedure on how to test the C4 Traction
Controller.
•C4 Drive Startup – Describes how to setup various drives that may be used within the C4
Traction Controller. The following is a list of drives that can be used on the C4:
•DSD412
•HPV900
•M1000
•KEB

C4 User Manual
Page 2 © 2019 Smartrise Engineering, Inc. All Rights Reserved August 15, 2019
1.2 C4 Traction Controller Components
The C4 Traction Controller consist of the following:
C4 Controller – Performs serial data exchange between the machine room, the top of the car,
and the car panel.
Figure 1: C4 Controller