SMC Networks EliteConnect SMC2582W-B User manual

Enterprise Wireless SMC2582W-B
EliteConnect™ 2.4GHz 11 Mbps Wireless Bridge
www.smc.com
Designed to connect two or more separated Local Area
Networks (usually located in different buildings), the new
SMC EliteConnectTM Wireless Bridge is the easiest alternative
to a traditional wired network. It delivers high data rate and
allows personnel in a corporate campus environment to
access all local and remote network resources. The Wireless
Bridge is also a cost-effective solution. It eliminates the
need for expensive cabling and difficult-to-install leased lines.
The new SMC2582W-B bridges two or more wired LANs.
Connected to the Ethernet backbone through an RJ-45
connector, the Wireless Bridge (Access Point/Bridge and
Bridge Master modes) can also function as an Access Point,
bridging between a wired LAN and one or more wireless
mobile PC-based stations. The wireless bridge connects
difficult-to-wire locations, branch offices, school or corporate
campus environments, frequently changing workplaces, tempo-
rary LANs, hospitals and warehouses. The Wireless Bridge also
allows multiple buildings to share a single Internet connection.
SMC2582W-B has three operational modes: Access
Point/Bridge, Bridge Master, and Bridge Slave. The Access
Point/Bridge mode provides both Access Point and Bridging
functionalities. The Bridging function is supported through
Wireless Distribution System (WDS). SMC2682W or
SMC2586W-G Wireless Bridges exist in the same Bridging
environment as the SMC2582W-B, Bridge Master or Bridge
Slave modes can be used.
SMC2582W-B EliteConnectTM Wireless Bridge supports
advanced wireless security features including 64-bit or 128-bit
key WEP wireless data encryption, disabled SSID broadcast,
wireless client isolation, and MAC address filtering to block
unauthorized wireless clients. In addition, the new
EliteConnectTM Wireless Bridge provides multiple levels of proto-
col filtering (Ethernet, IP, TCP/UDP) to ensure network security.
The new EliteConnectTM 2.4GHz 11 Mbps Wireless Bridge also
has flexible management features. Web based network man-
agement tools make configuration and remote management of
the network simple. IT professionals can also use Telnet or
TFTP to quickly and easily manage the device. In addition,
SMC2582W-B supports SNMP allowing easy integration of
your wireless LAN with your wired infrastructure. Other
management features include a system log, event log and syslog.
SMC2582W-B comes with a detachable antenna. If extend-
ed range is required, users can choose among the wide
selection of SMC 2.4GHz High Gain Antennas. The new
EliteConnectTM Wireless Bridge also supports Power over
Ethernet that adheres to 802.3af standard (using optional
SMCPWR-INJ3). Power over Ethernet reduces installation
cost by using standard Category 5 cable to provide power to
the Wireless Bridge.
Combining all of the above features the SMC2582W-B
EliteConnect 2.4GHz Wireless Bridge is the best available,
fast, reliable, and cost-effective building-to-building solution
in the market.
FEATURES
IEEE802.11b compliant
Flexible access point and bridging functionalities
Flexible management features
Detachable antennas
Enterprise level of authentication and encryption security
Power over Ethernet support (optional)
IEEE802.11b compliance allows for seamless interoperation
among multiple vendors
Connects two separated LANs (usually located in different
buildings) without needing expensive cabling or leased lines
Flexible network management through CLI, Web, Telnet, TFTP,
SNMP make it simple and easy to monitor, troubleshoot, and
view event logging
Optional use of 2.4GHz High Gain Antenna for extended range
and coverage
Enterprise class security features including the new WPA, up to
128-bit WEP encryption, 802.1x authentication and dynamic key
management, wireless client isolation, disabled SSID broadcast
Reduces installation cost by using standard Cat. 5 cable to
provide power to the Access Point
BENEFITS
OVERVIEW

TECHNICAL SPECIFICATIONS SMC2582W-B / SMCPWR-INJ3
STANDARDS
• IEEE802.11b, IEEE802.1x,
• IEEE802.3, IEEE802.3u, IEEE802.3af
INTERFACE
• 1x 10BASE-T/100BASE-TX (RJ-45) Port
• 1x RS-232c Serial Port
• IEEE802.11b Wireless LAN
MEDIA ACCESS PROTOCOL
• CSMA/CA
OPERATIONAL MODE
• Infrastructure Mode
• Access Point/WDS Bridge (used in pure
SMC2582W-B bridging environment)
• Bridge Master/Slave (used when
SMC2586W-G, SMC2582W-B, and
SMC2682W are in the bridging environment)
TRANSFER DATA RATES
• 11, 5.5, 2, 1 Mbps with auto-Fallback
MODULATION TYPE
• IEEE802.11b: DSSS
Modulation Data Rate
DBPSK 1 Mbps
DQPSK 2 Mbps
CCK 5.5, 11 Mbps
CHANNELS/FREQUENCY RANGE
• 2.4 GHz frequency band
• 11 channels, 2.400 ~ 2.4720 GHz
(US, Canada)
• 13 channels, 2.400 ~ 2.4835 GHz (ETSI)
• 14 channels, 2.400 ~ 2.4970 GHz (Japan)
TRANSMIT OUTPUT POWER (E.I.R.P.)
Transmit Power Control IEEE802.11b
High 16-18 dBm
Medium High 13-15 dBm
Medium 10-12 dBm
Medium Low 7-9 dBm
Low 4-6 dBm
RECEIVE SENSITIVITY
Transfer Rate IEEE802.11b
1 Mbps -91 dBm
2 Mbps -88 dBm
5.5 Mbps -85 dBm
11 Mbps -83 dBm
ANTENNA TYPE
• One removable, replaceable 2 dBi Antenna
• R-SMA (male) connector for external
Antenna
OPERATING RANGE
• 802.11b: up to 457m/ 1.500 ft
• Ranges vary based upon numerous
environmental factors so individual
performance may be significantly different.
SECURITY
• 64-/128-bit WEP encryption
• TKIP encryption
• Wi-Fi Protected Access (WPA)
• IEEE802.1x, EAP-MD5, EAP-TLS,
EAP-TTLS, PEAP, LEAP
• Disable SSID Broadcast
• MAC address filtering
• Wireless Client Isolation
CONFIGURATION AND MANAGEMENT
• Web-browser, Telnet, TFTP, SNMP
• Syslog, Event Logging
• DHCP Server
MAXIMUM CLIENTS
•64
LED
• Power, LAN, WLAN, Alive
TEMPERATURE
• Operating: 0°C ~ 55°C / 32°F ~ 131°F
• Storage: -20°C ~ 70°C / -4°F ~ 158°F
HUMIDITY (NON-CONDENSING)
• 5% ~ 95% in storage
DIMENSION (WITHOUT ANTENNAS)
• 172 x 140 x 32 mm / 6.75 x 5.5 x 1.25 in
WEIGHT
• 363 g/ 0.80 lbs
COMPLIANCE
• Wi-Fi compliant
• FCC Part 15 Class B
• IC (Canada)
• ETSI, EN300328-1/ EN300328-2/
EN60950/EN301489-1/-17 (Europe)
WARRANTY
• Limited Lifetime
SMCPWR-INJ3 (optional)
INPUT POWER REQUIREMENTS
• AC Input Voltage: 90 - 264VAC, 47-63 Hz
• AC Input Current: 2A at 100VAC, 1A at
240VAC (-48VDC)
OUTPUT VOLTAGE
• Aggregate Power: 50W (48VDC)
PoE OUTPUT SPECIFICATION
• PIN Assignments and Polarity:
(+) 4/5, (-) 7/8
LEDs
• AC Power, Power Active, Over Current
Protection, Connectors Shielded RJ-45
TEMPERATURE
• Operating: 0°C ~ 40°C / 32°F ~ 104°F
• Storage: -25°C ~ 85°C / -13°F ~ 185°F
HUMIDITY (NON-CONDENSING)
• Max. 90% in storage
DIMENSION
• 101 x 140 x 38 mm/ 4 x 5.5 x 1.5 in
WEIGHT
• 626 g / 1.38 lbs
COMPLIANCE
• FCC Part 15 Class B
•CE
• UL1950
• CSA A22.2 No. 950
• EN60950
•CB
North America
38 Tesla
Irvine, CA 92618
1-800-SMC-4YOU
24/7 Technical Support
Europe/ Africa
Fructuos Gelabert 6-8
08970 Sant Joan Despí
Barcelona, Spain
Check www.smc.com for your local
country contact information
www.smc.com
Contact