SMC Networks PF2MC7 Series User manual

Peak/Bottom value
Line name
Accumulated value
Instantaneous flow rate
(Main screen)
Line name
(Sub screen/Left)
Set value
(Sub screen/Right)
IP65
Applicable fluid Dry air, N2
3-Color Display
Expanded flow range
3-color/3-screen display∗1
∗1 3-screen display: 1 main screen and 2 sub screens (left/right)
1 2 5 10 20 25 50 100 150 200 300 500 600 1000 2000
Rated flow range [L/min]
20 2000
2000 L type
100:1
∗2 Rated flow ratio is 10 : 1 for the existing PF2A series model.
1L/min
A wide range of flow measurement is possible with 1 product.
Compatible
Flow ratio∗2
10 1000
1000 L type
5 500
500 L type
PFG300 Series
RoHS
Digital Flow Monitor
Allows for the monitoring of
remote lines
∗For the PF2MC7-L
The flow rate value and the device status can be
figured out easily via the process data.
p. 2
Over current error
Above the rated/
accumulated flow range
Below the rated/
accumulated flow range
Internal product malfunction
Diagnosis items
3-Screen Display New
New
3-Screen Display
5 L/min for the existing PF2A series model
Smallest settable increment
CAT.ES100-146A
PF2MC7 (-L) Series
Digital Flow Switch

Protruding
part
Moist air
Sensor unit
Rotary display
Display can be rotated in increments of
45°to suit the installation conditions.
Easy operation, improved visibility
Counterclockwise 90°
Clockwise 225°
Counterclockwise
90°
Clockwise
225°
0°(No rotation)
Counterclockwise
90°
Clockwise
180°
Installation
example
Bypass structure
Delay time setting
Output operation
Display color
Reference condition
Display mode
Response time
External input function
Forced output function
Accumulated value hold
Selection of the display
on the sub screen
Display OFF mode
Setting of a security code

Peak/Bottom value display
Key-lock function
Analog output free range
function
Error display function
Bypass structure with protruding part at the
main piping, reduces the contact of moist air
with the sensor, reducing degradation of the
sensor and maintaining accuracy.
Functions
Can be selected from 50 ms (0.05 s)/0.1 s/0.5 s/
1.0 s/2.0 s/5.0 s
 The accumulated indication shows the operating
flow rate or residual amount (of N2, etc.)
in a gas cylinder.
Flow control of equipment, main line
and branch line
Applications
Remote control is possible
with accumulated pulse.
∗ The product is not designed to be explosion proof.
 Flow control of the air for spray painting
Refer to the Web Catalog for
details of the multi-counter CEU5.
OUT
IN
IN OUT
OUT IN
(For details, refer to pages 24 and 25.)
Response time (Digital filter)
Grease-free NPN/PNP switch function
The number of stock items can be reduced.
Response time can be set depending on application.
Compressed air line
Air dryer
IDF/IDU AF AR/IR AFD/AMD PF2MC
Air filter Regulator Micro mist separator
AFM/AM
Mist separator Flow switch
∗
Recommended air quality class: JIS B 8392-1 1.1.2 to 1.6.2 (ISO 8753-1 1.1.2 to 1.6.2)
Example of
recommended
pneumatic circuit
Select a digital flow switch to increase energy savings!
Flow control is necessary for promoting energy saving in any application.
Saving energy starts from numerical control of the flow consumption of equipment and lines and
clarification of the purpose and effect.
Digital display allows visualization.
3-color/3-screen display, Improved visibility
Remote control is possible with
accumulated pulse.
3-Color Display 3-Screen Display
Digital Flow Switch
PF2MC7(-L) Series p. 9
1

IO-Link Compatible PF2MC7--L-
Supports the IO-Link communication protocol
IO-Link is an open communication interface
technology between the sensor/actuator
and the I/O terminal that is an international
standard: IEC 61131-9.
IO-Link Master
Fieldbus
Device settings can be
set by the master.
• Threshold value
• Operation mode,
etc.
Read the device data.
• Switch ON/OFF signal and analog value
• Device information:
Manufacturer, Product part number, Serial number, etc.
• Normal or abnormal device status
• Cable breakage
Configuration File (IODD File*1)
· Manufacturer · Product part no. · Set value
*1 IODD File:
IODD is an abbreviation of IO Device
Description. This file is necessary for setting
the device and connecting it to a master. Save
the IODD file on the PC to be used to set the
device prior to use.
IO-Link Compatible Device:
Digital Flow Switch for Air
Operation and Display
Communication
with master
IO-Link status
indicator light Status Screen display*2Description
Ye s
*1
IO-Link
mode
Normal
Operate Normal communication status (readout of measured value)
(Flashing)
Start up
At the start of communication
Preoperate
Abnormal
Version does
not match
The IO-Link version does not match that of the master.
*The applicable IO-Link version is 1.1.
No
Communication
disconnection
Normal communication was not received for 1 s or longer.
OFF SIO mode General switch output
*1 In IO-Link mode, the IO-Link indicator is ON or flashing. *2 When the lower line (sub screen) is set to mode display
*“ModE LoC” is displayed when the data storage lock is enabled. (Except for when the version does not match or when in SIO mode)
Display function
Displays the output communication
status and indicates the presence of
communication data
SIO mode Start-up mode Preoperate mode Operate mode
p. 10
Implement diagnostic bits in the process data.
Application Example
Diagnosis items
• Over current error
• Above the rated flow range
• Above the accumulated flow range
• Below the rated flow range
• Below the accumulated flow range
• Internal product malfunction
Process Data
Bit offset Item Note
0 OUT1 output 0: OFF 1: ON
1 OUT2 output 0: OFF 1: ON
8 Flow rate diagnosis 0: OFF 1: ON
14 Fixed output 0: OFF 1: ON
15 Error (Failure) 0: OFF 1: ON
16 to 31
Measured flow rate value Signed 16 bit
Bit offset 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
Item Measured flow rate value (PD)
Bit offset 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Item Error
(Failure)
Fixed
output
Reservation
Flow rate
diagnosis
Reservation OUT2 OUT1
Switch output
The diagnostic bit in the cyclic process data makes it easy to find problems with the equipment.
It is possible to find problems with the equipment in real time using the cyclic (periodic) data and to monitor such problems in detail with the noncyclic (aperiodic) data.
For the control of air consumptionFor the control of air consumption
Can be used for the flow control,
etc., of the main line and branch
lines
The instantaneous flow, set value,
and accumulated value can be
checked at the same time.
M/C
M/C
M/C
Main line flow control
Flow control for
each branch line
Digital Flow Switch PF2MC7(-L) Series
3-Color Display 3-Screen Display
PLC
PC
*1
2

The sub screen (label) shows the item
to be set.
It is possible to
change the settings
while checking the
measured value.
When the S button is pressed and the set value (P_1) is being displayed,
the set value (threshold value) can be set. When the S button is pressed and
the hysteresis (H_1) is being displayed, the hysteresis value can be set.
Existing model
PFG300
NewNew
Switches
between displays
Normal output/Lo side Set value (Threshold value) Normal output/Hi side Set value (Threshold value)
1 2 3
Setting completed
Use the or
button to adjust to the
set value.
*Either “Input of line name” or “Display OFF” can be added via the function settings.
The sub screen can be switched by pressing the up/down buttons.
Label (Display item)
Sub screen/Left side
Setting completed
Setting start
Release the buttons after
“---” is displayed on the
right side sub screen.
Visualization of settings
Allows for the monitoring of remote lines
Easy screen switching
Simple 3-step setting
Pressing the and buttons simultaneously
for a minimum of 1 second will make the set value
(threshold value) the same as the current flow value.
With a snap shot function for set value reading
Snap shot
function
Accumulated flow Set value (Threshold value) Hysteresis value Bottom value Peak value
Mode Examples
Hysteresis mode
Window comparator mode
Normal output Set value (Threshold value) Reversed output Set value (Threshold value) Hysteresis Set hysteresis value
Reversed output/Lo side
Set value (Threshold value)
Reversed output/Hi side
Set value (Threshold value)
Set value (Threshold value)
Sub screen/Right side
PFG300
PFG300
PF3A7H
PFMB
PFG300
PFG300
PFG300
3-Screen Display Digital Flow Monitor
PFG300 Series
Always
displayed on
one screen
Centralized flow control
The flow rate of a flow
switch installed in a
distant location can be
confirmed!
p. 18
For main line
PF2MC
Measured value (Current flow value) Main screen
Push Push Push Push
3

Bracket A
Bracket B
Panel mounting
Voltage input
1 V 5 V
Current input 4 mA 20 mA
Display
B
A
Voltage input
Display
1000
0
1 V 5 V
Copy function
The set values of
the monitor can
be copied to up to
10 monitors
simultaneously.
Power saving function
Power consumption is reduced by turning off the monitor.
Security code
The key locking function
keeps unauthorized
persons from tampering
with the settings.
External input function
The accumulated value, peak value, and bottom value can be reset remotely.
Current consumption*1Reduction rate*2
25 mA or less Approx. 50% reduction
*1 During normal operation *2 In power saving mode
Source of
copy
1 unit 10 units2 units
C o p yC o p y
6 mm shorter
25 mm
Compact: Max. 6 mm shorter
 Lightweight: Max. 5 g lighter (30 g /25 g)
PFG300
PFM300
Bracket configuration allows for mounting in four orientations.
Mountable side by side without clearance
One opening!
· Reduced panel fitting labor
· Space saving
Convenient functions
Mounting
Compact & Lightweight
31 mm
¡ Selection of the display on the sub screen
¡Analog output free range function
¡Error display function
¡Copy function
¡Selection of power saving mode
Functions (EFor details, refer to pages 26 to 28.)
¡Output operation
¡Simple setting mode
¡Display color
¡Delay time setting
¡Digital filter setting
¡FUNC output switching function
¡Selectable analog output function
¡External input function
¡Forced output function
¡Accumulated value hold
¡Peak/Bottom value display
¡Setting of a security code
¡Key-lock function
¡Reset to the default settings
¡Display with zero cut-off setting
The number of stock items can be reduced. The displayed value to the sensor input can be set as required.
(Voltage input: 1 to 5 V/Current input: 4 to 20 mA)
Pressure switch/Flow switch can be displayed.
A is displayed for 1 V (or 4 mA).
B is displayed for 5 V (or 20 mA).
The range can be set as required.
Pressure Sensor for General Fluids/PSE570
Set A and B to the values shown
in the table above.
A B
PSE570 0 1000
PSE573 –100 100
PSE574 0 500
Select
NPN or PNP
NPN/PNP switch function
Analog output of 0 to 10 V is
also available.
Input range selection (for Pressure/Flow rate)
NPN PNP
Voltage output 1 to 5 V Switchable
0 to 10 V
Current output 4 to 20 mA Fixed
Mounting
example
Mounting
example
4
Digital Flow Monitor PFG300 Series
3-Screen Display

Series
1 2 0.20.1 0.5 5 10 20 25 50 100 150 200 300 500 600 1000 2000 3000 6000 12000
Rated flow range [L/min]
0.3
25
0.1
10
Smallest
settable
increment
Detection
method
Applicable
fluid
Thermal
type
(MEMS)
Dry air
N2
Ar
CO2
Dry air
N2
0.1
L/min
0.5
L/min
1
L/min
2
L/min
5
L/min
Thermal
type
(MEMS)
Bypass
flow
type
Thermal
type
(MEMS)
Bypass
flow
type
Thermal
type
(Thermistor)
Air
N2
—
—
Thermal
type
(Platinum
sensor)
Bypass
flow
type
Air
N2
0.1
L/min
1
L/min
0.01
L/min
0.001
L/min
1
L/min
Dry air
N2
1
L/min
PF2M7(-L)
PFG300
PFG300
PF2A
PF3AH(-L)
PFMB
PF2MC7(-L)
1 10
10 1000
20 2000
5 500
10 1000
20 2000
5 500
2 200
2 200
1 100
0.5 50
0.05
5
0.02
2
0.01
10 100
5 50
20 200
50 500
120
12000
30 3000
20 2000
10 1000
60 6000
Compatibility with the
PFG300 digital flow monitor
PFG300
Series Detection
method
Applicable
fluid
Thermal
type
(MEMS)
Dry air
N2
1 2 3−3 −2 −1 −0.5 0 0.5
Rated flow range [L/min]
PFMV
−1 1
−0.5 0.5
0 1
3
0 3
0 0.5
1
Modular type
Modular type
Body ported type
Body ported type
Body ported type
Modular
type
Body ported type
Flow Switch Flow Rate Variations
2
L/min
5
L/min
10
L/min
1
L/min
2
L/min
p. 9
p. 18
−3
5

Flow Switch Variations / Basic Performance Table
PF2APFMV PFMB
∗The monitor unit values are for the PFG300 and PFMV3.
12 to 24 VDC
±10%
18 to 30 VDC
±10%
PF2MC7(-L)
PFMV3
p. 9
p. 18
PFG300
PFG300
PF2M7(-L)
12 to 24 VDC
±10%
18 to 30 VDC
±10%
PF2M7
PF2M7-L
PFMC
PFMC-L
0.01 to 1
0.02 to 2
0.05 to 5
0.1 to 10
0.3 to 25
0.5 to 50
1 to 100
2 to 200
Fluid SeriesSetting
Enclosure
Display Output
Hysteresis
Repeatability Power supply
voltage
Rated flow range
[L/min]
Temperature characteristics
(25°C standard)
LED display
3-color LCD display 3-color LCD display
NPN/PNP
open collector
Accumulated pulse output
Analog voltage output
Analog current output
IO-Link
NPN/PNP
open collector
Accumulated pulse output
Analog voltage output
Analog current output
NPN/PNP
open collector
Accumulated pulse output
NPN/PNP
open collector
Analog voltage output
Analog current output
NPN/PNP
open collector
Accumulated pulse output
Analog voltage output
Analog current output
IO-Link
NPN/PNP
open collector
Accumulated pulse output
Analog voltage output
Analog current output
IO-Link
Hysteresis mode: Variable
Window comparator mode:
Variable
Hysteresis mode: Variable
Window comparator mode:
Variable
Hysteresis mode: Variable
Window comparator mode:
Variable
Hysteresis mode: Variable
Window comparator mode:
Fixed (3 digits)
Hysteresis mode: Variable
Window comparator mode:
Variable
Hysteresis mode: Variable
Window comparator mode:
Variable
±1% F.S.
(Fluid: Dry air)
±1% F.S.
(PF2A70)
±2% F.S.
(PF2A71)
±2% F.S.
(Fluid: Dry air)
Analog output:
±5% F.S.
Monitor unit:
±0.1% F.S.
Analog output:
±0.3% F.S.
±1% F.S.
(Fluid: Dry air)
Monitor unit:
±0.1% F.S.
±1% F.S.
Monitor unit:
±0.1% F.S.
Monitor unit:
±0.1% F.S.
±2% F.S.
(15 to 35°C)
±5% F.S.
(0 to 50°C)
±3% F.S. (15 to 35°C)
±5% F.S. (0 to 50°C)
±2% F.S.
(15 to 35°C)
±5% F.S.
(0 to 50°C)
Monitor unit:
±0.5% F.S.
(0 to 50°C)
±2% F.S.
(15 to 35°C)
±5% F.S.
(0 to 50°C)
Monitor unit:
±0.5% F.S.
(0 to 50°C)
±5% F.S.
(0 to 50°C)
Monitor unit:
±0.5% F.S.
(0 to 50°C)
Monitor unit:
±0.5% F.S.
(0 to 50°C)
12 to 24 VDC
±10%
12 to 24 VDC
±10%
12 to 24 VDC
±10%
1 to 10
5 to 50
10 to 100
20 to 200
50 to 500
2 to 200
5 to 500
10 to 1000
20 to 2000
5 to 500
10 to 1000
20 to 2000
Digital DigitalDigitalDigital Digital Digital
Dry air,
N2, Ar, CO2Air, N2Dry air, N2Dry air, N2Dry air, N2Air, N2
IP40 IP40 IP65
IP40 IP65
[Monitor unit: IP40]
IP65
[Monitor unit: IP40]
±3% F.S. ±1 digit
(15 to 35°C)
±5% F.S. ±1 digit
(0 to 50°C)
±1% F.S. ±1 digit
(Fluid: Dry air)
0 to 0.5
0 to 1
0 to 3
−0.5 to 0.5
−1 to 1
−3 to 3
PF3AH(-L)
PFG300
2-color LCD display
2-color LED
display
2-color LCD
display
Monitor unit:
2-color LCD display
Monitor unit:
3-color LCD display
30 to 3000
60 to 6000
120 to 12000
10 to 1000
20 to 2000
24 VDC
±10%
PF3A7H
21.6 to 30 VDC PF3A8  H-L
18 to 30 VDC
±10%
PF3A7H-L
21.6 to 30 VDC
PF3A701H/
702H-L
6

7

3-Color Display 3-Screen Display
Digital Flow Switch PF2MC7 Series
3-Color Display 3-Screen Display
IO-Link Compatible Digital Flow Switch PF2MC7-L Series
3-Screen Display
Digital Flow Monitor PFG300 Series
CONTENTS
Digital Flow Switch PF2MC7 Series
How to Order .................................................................................................................................... p. 9
Specifications................................................................................................................................ p. 11
IO-Link Compatible Digital Flow Switch PF2MC7-L Series
How to Order ................................................................................................................................. p. 10
Specifications................................................................................................................................ p. 11
Flow Range .......................................................................................................................................... p. 13
Analog Output..................................................................................................................................... p. 13
Pressure Loss..................................................................................................................................... p. 13
IN Side Straight Piping Length and Accuracy................................................................ p. 13
Internal Circuits and Wiring Examples................................................................................ p. 14
Construction: Parts in Contact with Fluid .......................................................................... p. 16
Dimensions........................................................................................................................................... p. 17
3-Screen Display Digital Flow Monitor PFG300 Series
How to Order ................................................................................................................................. p. 18
Specifications................................................................................................................................ p. 19
Internal Circuits and Wiring Examples.......................................................................... p. 20
Dimensions..................................................................................................................................... p. 21
PF2MC7(-L)/Function Details ................................................................................................ p. 24
PFG300/Function Details .......................................................................................................... p. 26
Safety Instructions ............................................................................................................. Back cover
3-Screen Display
3-Color Display
3-Screen Display
3-Color Display
8
Function Details PFG300 PF2MC7(-L)

RoHS
How to Order
MA
Option 2
Nil No bracket
R
With bracket*10
*10 Options are shipped together with the
product but do not come assembled.
Option 1
Nil
With lead wire with M8 connector (3 m)*7
NWithout lead wire with M8 connector
*7 Options are shipped together with the product
but do not come assembled.
Unit specification
Nil Unit selection function*8
MSI unit only*9
*8 This product is for overseas use only. (The SI unit type is
provided for use in Japan in accordance with the New
Measurement Act.)
*9 Fixed units: Instantaneous flow: L/min, Accumulated flow: L
Calibration certificate
Nil None
A*11
Yes
*11 Made to order
The certificate is in both
English and Japanese.
Options/Part Nos.
When only optional parts are required, order with the part numbers listed below.
Part no. Option Note
ZS-40-A Lead wire with M8 connector Length: 3 m
ZS-42-A Bracket Mounting screw for PF2MC7501/7102 (M3 x 5, 2 pcs.)
ZS-42-B Bracket Mounting screw for PF2MC7202 (M3 x 5, 2 pcs.)
PF2MC 501 047
Thread type
Nil Rc
NNPT
FG*1
*1 ISO 228 compliant
Rated flow range
501 5 to 500 L/min
102 10 to 1000 L/min
202 20 to 2000 L/min
Port size
Symbol
Port
size
Rated flow range
501 102 202
04 1/2   —
06 3/4 — — 
PF2MC7 Series
Digital Flow Switch
Output specification
Symbol OUT1*3OUT2*3, *4 Applicable monitor unit model
ANPN
NPN⇔External input
*5—
BPNP
PNP⇔External input
*5—
CNPN
Analog voltage output
*6PFG300 series
DNPN Analog current output PFG310 series
E*2PNP
Analog voltage output
*6PFG300 series
F*2PNP Analog current output PFG310 series
*2 Made to order
*3 The switch output (NPN/PNP) is selected as a default. Either
of them is selectable by pressing a button.
*4 Switch output or external input can be selected by pressing
the buttons.
*5 Can be selected from accumulated value external reset or
peak/bottom value reset
*6 1 to 5 V or 0 to 10 V can be selected by pressing the button.
The default setting is 1 to 5 V.
3-Color Display 3-Screen Display
9

RoHS
How to Order
MQL
Output specification
Symbol OUT1 OUT2*2 Applicable monitor unit model
LIO-Link/
Switch output (N/P) — —
L2 IO-Link/
Switch output (N/P)
Switch output (N/P)
⇔External input*4—
L3 IO-Link/
Switch output (N/P)
Analog voltage
output*3PFG300 series
L4 IO-Link/
Switch output (N/P) Analog current output PFG310 series
*2 Switch output (analog output) or external input can be selected by
pressing the buttons.
Switch output (analog output) is set as default setting.
Output symbol “L” cannot be used as the OUT2 terminal is not
connected.
*3 1 to 5 V or 0 to 10 V can be selected by pressing the button.
The default setting is 1 to 5 V.
*4 Can be selected from accumulated value external reset or peak/
bottom value reset
Option 2
Nil No bracket
RWith bracket*8
*8 Options are shipped together
with the product but do not
come assembled.
Option 1
Nil With lead wire with M8 connector (3 m)*5
NNone
Q
With M12-M8 conversion lead wire (0.1 m)
*5
*5 Options are shipped together with the product but
do not come assembled.
Unit specification
Nil Unit selection function*6
MSI unit only*7
*6 This product is for overseas use only. (The SI unit type is provided
for use in Japan in accordance with the New Measurement Act.)
*7 Fixed units: Instantaneous flow: L/min, Accumulated flow: L
Calibration certificate
Nil None
A*9Ye s
*9 Made to order
The certificate is in both English and Japanese.
Options/Part Nos.
When only optional parts are required, order with the part numbers listed below.
Part no. Description Note
ZS-40-A
Lead wire with M8 connector Length: 3 m
ZS-42-A Bracket
Mounting screw for PF2MC7501/7102(-L)
(M3 x 5, 2 pcs.)
ZS-42-B Bracket
Mounting screw for PF2MC7202(-L)
(M3 x 5, 2 pcs.)
ZS-40-M12M8-A
M12-M8 conversion lead wire Length: 0.1 m
PF2MC 501 04
7
Thread type
Nil Rc
NNPT
FG*1
*1 ISO 228 compliant
Rated flow range
501 5 to 500 L/min
102 10 to 1000 L/min
202 20 to 2000 L/min
Type
7Integrated display
Port size
Symbol
Port
size
Rated flow range
501 102 202
04 1/2 V V —
06 3/4 — — V
3-Color Display 3-Screen Display
Digital Flow Switch
PF2MC7-L Series
*For wiring, refer to the Operation Manual on the SMC website, https://www.smcworld.com
(42.2)100(32.8)
3
4 2
1
2
14
3
M8 (Female)
Wiring diagram
M12 connector
M8 connector
M12 (Male)
Brown
White
q
w
e
r
q
w
e
r
Blue
Black
ZS-40-M12M8-A
M12-M8 conversion lead wire
* The lead wire with an M8 connector and the
M12-M8 conversion lead wire are interchange-
able with those for the existing PFMC series.
10
Function Details PFG300 PF2MC7(-L)

Specifications
Model PF2MC7501 PF2MC7102 PF2MC7202
Fluid Applicable fluid Dry air, N2
(Air quality grade is JIS 8392-1 1.1.2 to 1.6.2, ISO 8573-1 1.1.2 to 1.6.2.)
Fluid temperature range 0 to 50°C
Flow
Detection method Thermal type
Rated flow range 5 to 500 L/min 10 to 1000 L/min 20 to 2000 L/min
Set point
range
Instantaneous flow 5 to 525 L/min 10 to 1050 L/min 20 to 2100 L/min
Accumulated flow 0 to 999,999,990 L
Smallest settable
increment
Instantaneous flow 1 L/min
Accumulated flow 10 L
Accumulated volume per pulse
(Pulse width = 50 ms)
1 L/pulse 10 L/pulse
Accumulated value hold function
*1Intervals of 2 or 5 minutes can be selected.
Pressure
Rated pressure range 0 to 0.8 MPa
Proof pressure 1.2 MPa
Pressure loss Refer to the “Pressure Loss” graph.
Pressure characteristics
*2±5% F.S. (25°C standard) F.S. (0 to 0.8 MPa, 0.6 MPa standard)
Electrical
Power
supply
voltage
When used as a
switch output device
12 to 24 VDC ±10%, Ripple (p-p) 10% or less
When used as an
IO-Link device
18 to 30 VDC ±10%
Current consumption 55 mA or less
Protection Polarity protection
Accuracy
Display accuracy ±3% F.S.
Analog output accuracy ±3% F.S.
Repeatability ±1% F.S. (±2% F.S. when the response time is set to 0.05 s)
Temperature characteristics
±5% F.S. (0 to 50°C, 25°C standard)
Switch output
Output type Select from NPN or PNP open collector output.
Output mode Select from Hysteresis, Window comparator, Accumulated output,
Accumulated pulse output, Error output, or Switch output OFF modes.
Switch operation Select from Normal or Reversed output.
Max. load current 80 mA
Max. applied voltage 28 V (NPN output)
Internal voltage drop 1.5 V or less (at load current of 80 mA)
Digital filter *3Select from 0.05 s, 0.1 s, 0.5 s, 1.0 s, 2.0 s, or 5.0 s.
Delay time *4Variable from 0 to 60 s/0.01 s increments
Hysteresis *5Variable from 0
Protection Short circuit protection
Analog output *6
Output type Voltage output: 1 to 5 V (0 to 10 V can be selected, only when the power supply voltage is 24 VDC)*7,
Current output: 4 to 20 mA
Impedance
Voltage output Output impedance: Approx. 1 kW
Current output Max. load impedance: 600 Wat power supply voltage of 24 V, 300 Wat power supply voltage of 12 V
Response time *8Linked to the set value of the digital filter
External input *9External input Input voltage: 0.4 V or less (Reed or Solid state) for 30 ms or longer
Input mode Accumulated value external reset, Peak/Bottom value reset
Display
Reference condition *10 Select from Standard condition (STD) or Normal condition (NOR).
Unit *11
Instantaneous flow L/min, cfm (ft3/min)
Accumulated flow L, ft3
Display
range
Instantaneous flow
–25 to 525 L/min
(Displays [0] when value is within the –4 to 4 L/min range)
–50 to 1050 L/min
(Displays [0] when value is within the –9 to 9 L/min range)
–100 to 2100 L/min
(Displays [0] when value is within the –19 to 19 L/min range)
Accumulated flow 0 to 999,999,999 L
Min. display
unit
Instantaneous flow 1 L/min
Accumulated flow 10 L
Display type LCD
Display
LCD, 3-screen display (Main screen/Sub screen)
Main screen: Red/Green, Sub screen: White
Main screen: 4 digits, 7 segments, Sub screen: 9 digits, 11 segments
Display values updated 5 times per second
Indicator LED LED ON when switch output is ON (OUT1/OUT2: Orange)
Environmental
resistance
Enclosure IP65
Withstand voltage 250 VAC for 1 min between external terminals and housing
Insulation resistance 2 MWor more (50 VDC measured via megohmmeter) between external terminals and housing
Operating temperature range Operating: 0 to 50°C, Stored: –10 to 60°C (No condensation or freezing)
Operating humidity range Operating/Stored: 35 to 85% R.H. (No condensation or freezing)
Standards CE marking (EMC Directive, RoHS Directive)
Piping specification Rc1/2, NPT1/2, G1/2 Rc3/4, NPT3/4, G3/4
Main materials of parts in contact with fluid Stainless steel 304, PPS, Aluminum alloy, HNBR, Si, Au, GE4F
Weight
Piping
specification
Rc thread
NPT thread
160 g 240 g
G thread 170 g 245 g
Lead wire +80 g
Bracket +25 g +30 g
For flow switch precautions and specific product precautions,
refer to the “Operation Manual” on the SMC website.
11
PF2MC7(-L) Series

∗1 When using the accumulated value hold function, use the operating conditions to calculate the product life, and do not exceed it.
The number of times the memory device can be accessed is 3.7 million times. If the product is operated 24 hours per day, the product life will be as
follows:
· 5 min interval: life is calculated as 5 min x 3.7 million = 18.5 million min = Approx. 35 years
· 2 min interval: life is calculated as 2 min x 3.7 million = 7.4 million min = Approx. 14 years
If the accumulated value reset is repeatedly used, the product life will be shorter than the calculated life.
∗2 Do not release the OUT side piping port of the product directly to the atmosphere without connecting piping.
If the product is used with the piping port released to atmosphere, accuracy may vary.
∗3 The time for the digital filter can be set to the sensor input. The response time indicates when the set value is 90% in relation to the step input.
∗4 The time from when the instantaneous flow reaches the set value to when the switch output operates can be set.
∗5 If the flow fluctuates around the set value, the hysteresis must be set to a value more than the fluctuating width. Otherwise, chattering will occur.
∗6 Setting is only possible for models with analog output.
∗7 When selecting 0 to 10 V, refer to the analog output graph for the allowable load current.
∗8 The time from when the flow is changed by a step input (when the flow rate changes from 0 to the max. value of the rated flow range instantaneously)
until the analog output reaches 90% of the rated flow rate
∗9 Setting is only possible for models with external input.
∗10 The flow rate given in the specifications is the value under standard conditions.
∗11 Setting is only possible for models with the unit selection function.
∗Products with tiny scratches, marks, or display color or brightness variations which do not affect the performance of the product are verified as conforming
products.
Communication Specifications (IO-Link mode)
IO-Link type Device
IO-Link version V 1.1
Communication speed COM2 (38.4 kbps)
Configuration file IODD file∗1
Min. cycle time 3.4 ms
Process data length Input data: 4 bytes, Output data: 0 byte
On request data communication Yes
Data storage function Yes
Event function Yes
Vendor ID 131 (0 x 0083)
Device ID∗2
PF2MC7501-mm-Lm-mmm : 582 (0 x 0246)
PF2MC7501-mm-L2m-mmm: 583 (0 x 0247)
PF2MC7501-mm-L3m-mmm: 584 (0 x 0248)
PF2MC7501-mm-L4m-mmm: 585 (0 x 0249)
PF2MC7102-mm-Lm-mmm : 586 (0 x 024A)
PF2MC7102-mm-L2m-mmm: 587 (0 x 024B)
PF2MC7102-mm-L3m-mmm: 588 (0 x 024C)
PF2MC7102-mm-L4m-mmm: 589 (0 x 024D)
PF2MC7202-mm-Lm-mmm : 590 (0 x 024E)
PF2MC7202-mm-L2m-mmm: 591 (0 x 024F)
PF2MC7202-mm-L3m-mmm: 592 (0 x 0250)
PF2MC7202-mm-L4m-mmm: 593 (0 x 0251)
∗1 The configuration file can be downloaded from the SMC website, https://www.smcworld.com
∗2 The device ID differs according to each product type (output specification).
12
3-Color Display 3-Screen Display
Digital Flow Switch PF2MC7(-L) Series
Function Details PFG300 PF2MC7(-L)

Min. value of the
rated flow range
Voltage output (1 to 5 V)/
Current output (4 to 20 mA)
Max. value of the
rated flow range
A
B
0
Flow
Output
Min. value of the
rated flow range
Voltage output (0 to 10 V)
Max. value of the
rated flow range
D
C
Flow
0
Output
Pressure loss [kPa]
Flow [L/min]
0
10
20
30
40
50
0
100 200 300 400 500
Supply pressure
200 kPa
Supply pressure
400 kPa
Pressure loss [kPa]
Flow [L/min]
0
10
20
30
40
50
0
400 800 1200 1600 2000
Supply pressure
200 kPa
Supply pressure
400 kPa
Pressure loss [kPa]
Flow [L/min]
0
10
20
30
40
50
0
200 400 600 800 1000
Supply pressure
200 kPa
Supply pressure
400 kPa
OUTIN
Straight
piping length
109876543210
±0
±1
±2
±3
±4
±5
±6
Accuracy [% F.S.]
Straight piping length [cm]
Model Min. value of the rated flow range Max. value of the rated flow range
PF2MC7501(-L)
5 L/min 500 L/min
PF2MC7102(-L)
10 L/min 1000 L/min
PF2MC7202(-L)
20 L/min 2000 L/min
Flow/Analog Output
*1 Analog output accuracy is within ±3% F.S.
*2
A and C will change according to the setting of the zero cut function.
*3The analog output current from the connected equipment
should be 20 μA or less when selecting 0 to 10 V. When more
than 20 μA current flows, it is possible that the accuracy is not
satisfied below 0.5 V.
*The min. value of the rated flow range will change according to
the setting of the zero cut function.
0 L/min A*2B
Voltage output (1 to 5 V)*11 V 1.04 V 5 V
Current output*14 mA 4.16 mA 20 mA
0 L/min C*2D
Voltage output (0 to 10 V)*1, 3 0 V 0.1 V 10 V
Rated flow range Set point range Display range
Pressure Loss (Reference Data)
PF2MC7501(-L) (for 500 L/min) PF2MC7102(-L) (for 1000 L/min) PF2MC7202(-L) (for 2000 L/min)
Analog Output
Flow Range
IN Side Straight Piping Length and Accuracy (Reference Data)
• The piping on the IN side must have a straight section of piping with a length of 8 cm or more.
If a straight section of piping is not installed, the accuracy can vary by approximately ±2% F.S.
*The “straight section” refers to a section of piping without any bends or rapid changes in the cross
sectional area.
• When the PF2MC7501 or 7102 is connected to tubing, use a tube I.D. 9 mm or more just before
the product. The accuracy can vary by approximately ±2% F.S. when such tubing is not used.
Model Flow range
–100 L/min 0 L/min 200 L/min 500 L/min 1000 L/min 2000 L/min
PF2MC7501(-L)
PF2MC7102(-L)
PF2MC7202(-L)
5 L/min
10 L/min
10 L/min
–50 L/min
5 L/min
–25 L/min
500 L/min
525 L/min
525 L/min
1000 L/min
1050 L/min
1050 L/min
20 L/min
20 L/min
–100 L/min
2000 L/min
2100 L/min
2100 L/min
13
PF2MC7(-L) Series

Brown
DC (+)
Black OUT1
White OUT2
Blue DC (−)
12 to 24 VDC
+
−
Main circuit Main circuit
Main circuit Main circuit
Main circuit Main circuit
Brown DC (+)
Black OUT1
White Analog output
Blue DC (−)
Brown DC (+)
Black OUT1
White External input
Blue DC (−)
Brown DC (+)
Black OUT1
White OUT2
Blue DC (−)
Brown DC (+)
Black OUT1
White Analog output
Blue DC (−)
Brown DC (+)
Black OUT1
White External input
Blue DC (−)
12 to 24 VDC
+
−
12 to 24 VDC
+
−
12 to 24 VDC
+
−
12 to 24 VDC
+
−
12 to 24 VDC
+
−
Load
Load
Load
Load
LoadLoad
Load
LoadLoadLoad
Max. 28 V,
80 mA
Black OUT1
White OUT2 (PF2MC7--A/B- only)
Blue DC (−)
Load
Load
Max. 80 mA
Brown
DC (+)
Black OUT1
White OUT2 (PF2MC7--A/B- only)
Load
Load
0 V
50 ms
50 ms
0 V
50 ms
50 ms
or or
Internal Circuits and Wiring Examples
PF2MC7mmm-mm-Am-mmm
NPN (2 outputs) type
Max. applied voltage: 28 V, Max. load current: 80 mA, Internal voltage drop: 1.5 V or less
PF2MC7mmm-mm-A/Bm-mmm
NPN + External input selected
Max. applied voltage: 28 V, Max. load current: 80 mA, Internal voltage drop: 1.5 V or less
External input: Input voltage 0.4 V or less (Reed or Solid state input) for 30 ms or longer
PF2MC7mmm-mm-Cm-mmm
NPN (1 output) + Analog (1 to 5 V) output type
PF2MC7mmm-mm-Dm-mmm
NPN (1 output) + Analog (4 to 20 mA) output type
Max. applied voltage: 28 V, Max. load current: 80 mA, Internal voltage drop: 1.5 V or less
C: Analog output: 1 to 5 V
Output impedance: 1 kΩ
D: Analog output: 4 to 20 mA
Max. load impedance: 600 Ω
Min. load impedance: 50 Ω
PF2MC7mmm-mm-Bm-mmm
PNP (2 outputs) type
Max. load current: 80 mA, Internal voltage drop: 1.5 V or less
PNP + External input selected
Max. load current: 80 mA, Internal voltage drop: 1.5 V or less
External input: Input voltage 0.4 V or less (Reed or Solid state input) for 30 ms or longer
PF2MC7mmm-mm-Em-mmm
PNP (1 output) + Analog (1 to 5 V) output type
PF2MC7mmm-mm-Fm-mmm
PNP (1 output) + Analog (4 to 20 mA) output type
PF2MC7mmm-mm-A/B/C/D/E/Fm-mmm
NPN (2 outputs) type
NPN (1 output) + Analog output type
NPN (1 output) + External input type
PNP (2 outputs) type
PNP (1 output) + Analog output type
PNP (1 output) + External input type
Max. load current: 80 mA, Internal voltage drop: 1.5 V or less
E: Analog output: 1 to 5 V
Output impedance: 1 k
Ω
F: Analog output: 4 to 20 mA
Max. load impedance: 600
Ω
Min. load impedance: 50
Ω
Accumulated pulse output wiring examples
14
3-Color Display 3-Screen Display
Digital Flow Switch PF2MC7(-L) Series
Function Details PFG300 PF2MC7(-L)

Brown DC (+)
Black OUT1
White OUT2
Blue DC (−)
12 to 24 VDC
Main circuit
Load
Load
Brown
DC (+)
Black OUT1
White N.C.
Blue DC (−)
12 to 24 VDC
Main circuit
Load
Brown DC (+)
Black OUT1
White OUT2
Blue DC (−)
12 to 24 VDC
Main circuit
Load
Load
Brown DC (+)
Black OUT1
White Analog output
Blue DC (−)
12 to 24 VDC
Main circuit
Load
Load
Brown
DC (+)
Black OUT1
White External input
Blue DC (−)
12 to 24 VDC
Main circuit
Load
Brown
DC (+)
Black OUT1
White External input
Blue DC (−)
12 to 24 VDC
Main circuit
Load
Brown L+
q
Black C/Q r
White N.C. w
Blue L− e
L+
C/Q
L−
IO-Link
master
Main circuit
Brown DC (+)
Black OUT1
White Analog output
Blue DC (−)
12 to 24 VDC
Main circuit
LoadLoad
Brown
DC (+)
Black OUT1
White N.C.
Blue DC (−)
12 to 24 VDC
Main circuit
Load
Internal Circuits and Wiring Examples
PF2MC7m-mm-Lm-mm
NPN output type
PF2MC7m-mm-L3/L4m-mm
NPN + Analog output selected
PF2MC7m-mm-L2m-mm
NPN + External input selected
When used as an IO-Link device
Max. applied voltage: 30 V, Max. load current: 80 mA, Internal voltage drop: 1.5 V or less
L3: Analog output: 1 to 5 V or 0 to 10 V
Output impedance: 1 kΩ
L4: Analog output: 4 to 20 mA
Max. load impedance: 600 Ω
Min. load impedance: 50 Ω
Max. applied voltage: 30 V, Max. load current: 80 mA, Internal voltage drop: 1.5 V or less
Max. applied voltage: 30 V, Max. load current: 80 mA, Internal voltage drop: 1.5 V or less
External input voltage: 0.4 V or less (Reed or Solid state input) for 30 ms or longer
*The numbers in the diagrams show the connector pin layout.
PNP + Analog output selected
PNP + External input selected
Max. load current: 80 mA, Internal voltage drop: 1.5 V or less
L3: Analog output: 1 to 5 V or 0 to 10 V
Output impedance: 1 kΩ
L4: Analog output: 4 to 20 mA
Max. load impedance: 600 Ω
Min. load impedance: 50 Ω
Max. load current: 80 mA, Internal voltage drop: 1.5 V or less
External input voltage: 0.4 V or less (Reed or Solid state input) for 30 ms or longer
Max. applied voltage: 30 V, Max. load current: 80 mA, Internal voltage drop: 1.5 V or less Max. load current: 80 mA, Internal voltage drop: 1.5 V or less
PF2MC7m-mm-L2m-mm
NPN 2 output type PNP 2 output type
PNP output type
Max. load current: 80 mA, Internal voltage drop: 1.5 V or less
15
PF2MC7(-L) Series

!2!1!0ioqwertyi!0!1!2u
Construction: Parts in Contact with Fluid
Component Parts
No. Description Material Note
1 Sensor body PPS
2 Gasket HNBR
3 Flow rectifier Stainless steel 304
4 Sensor chip Silicon
5
Printed circuit board GE4F
6 Gasket HNBR
7 Body Aluminum alloy Anodized
8 Mesh Stainless steel 304
9 Spacer PPS
10 O-ring HNBR
11 Holder Stainless steel 304
12 C retaining ring Stainless steel 304
16
3-Color Display 3-Screen Display
Digital Flow Switch PF2MC7(-L) Series
Function Details PFG300 PF2MC7(-L)

50
A
W
V
B
S
U
T
F
E
D
5 1.4
1.5 2 x Port size
(35.5) 42
H
2 x M3 x 0.5 depth 5
LK
N
4 x 4.5
OUTIN
1 (Brown)
2 (White)(Black) 4
(
Blue) 3
M8
(3000)
(45)
(15)
ø4
(32.8)
ø10
Dimensions
Lead wire with M8 connector
(Part no.: ZS-40-A)
PF2MC7501/7102/7202(-L)
Cable Specifications
Conductor
Nominal cross
section
AWG23
Outside diameter Approx. 0.7 mm
Insulator
Material Heat-resistant PVC
Outside diameter Approx. 1.1 mm
Color Brown, White,
Black, Blue
Sheath Material Heat- and oil-
resistant PVC
Finished outside diameter ø4
Symbol
Model Port size A B D E F H K L N
PF2MC7501/7102(-L)
Rc1/2, NPT1/2 70 30 60.6 41.2 15 14 26 18 13.6
PF2MC7202(-L)
Rc3/4, NPT3/4, G3/4 90 35 66.1 46.7 17.5 24 31 28 16.8
PF2MC7501/7102(-L)
G1/2 76 30 60.6 41.2 15 14 26 18 13.6
Symbol
Model
Bracket dimensions
S T U V W
PF2MC7501/7102(-L)
24 22 32 40 50
PF2MC7202(-L)
30 30 42 48 58
Pin no. Pin name Wire color
1DC (+) Brown
2OUT2 White
3DC (–) Blue
4OUT1 Black
*4-wire type lead wire with M8 connector used for the PFMC7(-L) series
*For wiring, refer to the “Operation Manual” on the SMC website,
https://www.smcworld.com
17
PF2MC7(-L) Series

RoHS
How to Order
M L
Option 3
Nil None
C
ZS-28-CA-4
Sensor
connector
Option 4
Operation manual Calibration certificate
Nil —
Y— —
K 
T—
Unit specification
Nil Unit selection function*3
MSI unit only*4
*3 This product is for overseas use only.
(The SI unit type is provided for use in
Japan in accordance with the New
Measurement Act.)
*4 Fixed units: Instantaneous flow: L/min
Accumulated flow: L
Options/Part Nos.
When only optional parts are required, order with the part numbers listed below.
Part no. Option Note
ZS-28-CA-4
Sensor connector For PF2MC
ZS-46-A1 Bracket A
Tapping screw: Nominal size 3 x 8 L (2 pcs.)
ZS-46-A2 Bracket B
Tapping screw: Nominal size 3 x 8 L (2 pcs.)
ZS-46-B Panel mount adapter
ZS-46-D
Panel mount adapter + Front protection cover
ZS-46-5L
Power supply/output connection lead wire 5-core, 2 m
ZS-27-01 Front protection cover
Connection Example
PFG RT0
3 0
Output specification
RT
2 outputs (NPN/PNP switching type) +
Analog voltage output*1, 2
SV
2 outputs (NPN/PNP switching type) +
Analog current output*2
XY
2 outputs (NPN/PNP switching type) +
Copy function
*1 Can switch between 1 to 5 V and 0
to 10 V
*2 Can be switched to external input
or copy function
Type
3
Remote type monitor unit
PFG300 Series
Digital Flow Monitor
3-Screen Display
Option 2
Symbol Description
Nil None
A1 Bracket A
(Vertical
mounting)
ZS-46-A1
A2 Bracket B
(Horizontal
mounting)
ZS-46-A2
BPanel mount
adapter
ZS-46-B
D
Panel mount
adapter + Front
protection cover
ZS-46-D
Option 1
Symbol Description
Nil Without lead wire
L
Power supply/output
connection lead wire
(Lead wire length: 2 m)
ZS-46-5L
Power supply/output
connection lead wire
PFG300
PF2MC
Sensor connector
L
ead wire with M8 connector
(Option for PFMC)
Power supply/output
connection lead wire
Input specification
Symbol Description Applicable flow switch model
0
Voltage input PF2MC7-C/E/L3 series
1
Current input PF2MC7-D/F/L4 series
*The PFG3 (monitor unit) cannot be used
as an IO-Link communication device.
18
Function Details PFG300 PF2MC7(-L)

Specifications
Model PFG300 series
Applicable SMC
flow switch
Model PF2MC7501 PF2MC7102 PF2MC7202
Rated flow range*15 to 500 L/min 10 to 1000 L/min 20 to 2000 L/min
Flow
Set point
range
Instantaneous flow −25 to 525 L/min −50 to 1050 L/min −100 to 2100 L/min
Accumulated flow 0 to 999,999,999,990 L
Smallest settable
increment
Instantaneous flow 1 L/min
Accumulated flow 10 L
Accumulated volume per pulse
(Pulse width = 50 ms)
1 L/pulse 10 L/pulse
Accumulated value hold function
*3
Intervals of 2 or 5 minutes can be selected. The stored accumulated flow is held even when the power supply is OFF.
Electrical
Power supply voltage 12 to 24 VDC ±10%
Current consumption 25 mA or less
Protection Polarity protection
Accuracy
Display accuracy ±0.5% F.S. ±Min. display unit (Ambient temperature at 25°C)
Analog output accuracy ±0.5% F.S. (Ambient temperature at 25°C)
Repeatability ±0.1% F.S. ±1 digit
Temperature characteristics
±0.5% F.S. (Ambient temperature: 0 to 50°C, 25°C standard)
Switch output
Output type Select from NPN or PNP open collector output.
Output mode Select from Hysteresis, Window comparator, Accumulated output, Accumulated pulse output,
Error output, or Switch output OFF modes.
Switch operation Select from Normal or Reversed output.
Max. load current 80 mA
Max. applied voltage (NPN only) 30 VDC
Internal voltage drop (Residual voltage) NPN output: 1 V or less (at load current of 80 mA), PNP output: 1.5 V or less (at load current of 80 mA)
Response time*23 ms or less
Delay time*2
Select from 0.00, 0.05 to 0.1 s (increments of 0.01 s), 0.1 to 1.0 s (increments of 0.1 s), 1 to 10 s (increments of 1 s), 20 s, 30 s, 40 s, 50 s, or 60 s.
Hysteresis*4Variable from 0
Protection Short circuit protection
Analog output*5
Output type
Voltage output: 1 to 5 V, 0 to 10 V (only when the power supply voltage is 24 VDC)
Current output: 4 to 20 mA
(0 L/min to max. value of the rated flow)
Impedance
Voltage output Output impedance: 1 kΩ
Current output Max. load impedance: 300 Ω(at power supply voltage of 12 V), 600 Ω(at power supply voltage of 24 VDC)
Response time*250 ms or less
External input*6External input Input voltage: 0.4 V or less (Reed or Solid state) for 30 ms or longer
Input mode Select from Accumulated value external reset or Peak/Bottom value reset.
Sensor input
Input type
Voltage input: 1 to 5 VDC (Input impedance: 1 MΩ), Current input: 4 to 20 mA DC (Input impedance: 51 Ω)
(0 L/min to max.value of the rated flow)
Connection method Connector (e-CON)
Protection Over voltage protection (Up to 26.4 VDC)
Display
Display mode Select from Instantaneous flow or Accumulated flow.
Unit*7
Instantaneous flow L/min, cfm (ft3/min)
Accumulated flow L, ft3, L x 106, ft3x 106
Display
range
Instantaneous flow −25 to 525 L/min −50 to 1050 L/min −100 to 2100 L/min
Accumulated flow*9 0 to 999,999,999,990 L
Min. display
unit
Instantaneous flow 1 L/min
Accumulated flow 10 L
Display type LCD
Number of displays 3-screen display (Main screen, Sub screen)
Display color 1) Main screen: Red/Green, 2) Sub screen: Orange
Number of display digits 1) Main screen: 5 digits (7 segments), 2) Sub screen: 9 digits (7 segments)
Indicator LED LED ON when switch output is ON. OUT1/2: Orange
Digital filter*8
Select from 0.00, 0.05 to 0.1 s (increments of 0.01 s), 0.1 to 1.0 s (increments of 0.1 s), 1 to 10 s (increments of 1 s), 20 s, or 30 s.
Environmental
resistance
Enclosure IP40
Withstand voltage 1000 VAC for 1 min between terminals and housing
Insulation resistance 50 MΩor more (500 VDC measured via megohmmeter) between terminals and housing
Operating temperature range Operating: 0 to 50°C, Stored: −10 to 60°C (No condensation or freezing)
Operating humidity range Operating/Stored: 35 to 85% RH (No condensation or freezing)
Standards CE marking (EMC directive/RoHS directive)
Weight Body 25 g (Excluding the power supply/output connection lead wire)
Lead wire with connector +39 g
*1 Rated flow range of the applicable flow switch
*2 Value without digital filter (at 0.00 s)
*3 When using the accumulated value hold function, use the operating
conditions to calculate the product life, and do not exceed it. The max.
access limit of the memory device is 1.5 million times. If the product is
operated 24 hours per day, the product life will be as follows:
•
5 min interval: life is calculated as 5 min x 1.5 million = 7.5 million min = 14.3 years
•
2 min interval: life is calculated as 2 min x 1.5 million = 3 million min = 5.7 years
If the accumulated value external reset is repeatedly used, the product life
will be shorter than the calculated life.
*4 If the flow fluctuates around the set value, be sure to keep a sufficient
margin. Otherwise, chattering will occur.
*5 Setting is only possible for models with analog output.
*6 Setting is only possible for models with external input.
*7 Setting is only possible for models with the unit selection function.
*8
The response time indicates when the set value is 90% in relation to the step input.
*9 The accumulated flow display is the upper 6-digit and lower 6-digit (total of
12 digits) display. When the upper digits are displayed, x 106lights up.
*
Products with tiny scratches, marks, or display color or brightness variations which
do not affect the performance of the product are verified as conforming products.
For flow switch precautions and specific product precautions,
refer to the “Operation Manual” on the SMC website.
19
PFG300 Series