Smeg CMS4601NR User manual

AR
MANUALE D’USO
INSTRUCTIONS
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
GEBRUIKSAANWIJZINGEN
MANUAL DE INSTRUCCIONES
MANUAL DE INSTRUÇÕES
ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ
ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ
UŽIVATELSKÁ PŘÍRUČKA
INSTRUKCJA OBSŁUGI
BRUKSANVISNING
BRUGERVEJLEDNING
MACCHINA PER CAFFÈ E CAPPUCCINO
COFFEE AND CAPPUCCINO MAKER
MACHINE À CAFÉ ET À CAPPUCCINO
KAFFEE-/CAPPUCCINO-VOLLAUTOMAT
KOFFIE- EN CAPPUCCINOAPPARAAT
CAFETERA PARA CAFÉ Y CAPUCHINO
MÁQUINA DE CAFÉ E CAPPUCCINO
ΜΗΧΑΝΗ ΚΑΦΕ ΚΑΙ CAPPUCCINO
КОФЕМАШИНА ДЛЯ ПРИГОТОВЛЕНИЯ КОФЕ И КАПУЧЧИНО
PŘÍSTROJ NA PŘÍPRAVU KÁVY A KAPUČÍNA
EKSPRES DO KAWY I KAWY CAPPUCCINO
KAFFEMASKIN FÖR ESPRESSO OCH CAPPUCCINO
KAFFE- OG CAPPUCCINOMASKINE
AR
使用手册
InstructIons
Mode d’eMploI
BedIenunGsAnleItunG
GeBruIksAAnwIjzInGen
MAnuAl de InstruccIones
MAnuAl de Instruções
ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ
ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ
uIVAtelskÁ p Íru kA
InstrukcjA oBsuGI
BruksAnVIsnInG
BruGerVejlednInG
咖啡和卡布奇诺咖啡机
AR
使用手册
InstructIons
Mode d’eMploI
BedIenunGsAnleItunG
GeBruIksAAnwIjzInGen
MAnuAl de InstruccIones
MAnuAl de Instruções
ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ
ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ
uIVAtelskÁ p Íru kA
InstrukcjA oBsuGI
BruksAnVIsnInG
BruGerVejlednInG
咖啡和卡布奇诺咖啡机
ZH

2
EN
CONTENTS
INTRODUCTION ......................................... 3
Symbols used in these instructions .................................3
Letters in brackets............................................................3
Troubleshooting and repairs ............................................3
SAFETY ..................................................... 3
Fundamental safety warnings..........................................3
Designated use ................................................................4
Instructions .....................................................................4
DESCRIPTION ............................................ 4
Description of the appliance ...........................................4
Description of the control panel.......................................5
Description of milk container and accessories..................5
PRELIMINARY CHECKS ............................... 5
Controls after transport ...................................................5
Installing the appliance ...................................................5
Connecting the appliance ................................................5
USING THE APPLIANCE FOR THE FIRST TIME10
TURNING ON AND HEATING UP ................... 6
MAKING COFFEE USING COFFEE BEANS ...... 6
CHANGING THE QUANTITY OF COFFEE IN THE
CUP ......................................................... 7
ADJUSTING THE COFFEE MILL ..................... 8
MAKING ESPRESSO COFFEE WITH PRE
GROUND COFFEE INSTEAD OF BEANS ........ 8
DELIVERING HOT WATER ............................ 8
CHANGING THE QUANTITY OF HOT WATER ... 8
MAKING CAPPUCCINO................................ 8
CHANGING THE QUANTITY OF MILK AND COF
FEE FOR CAPPUCCINO ................................ 9
Changing the quantity of milk .........................................9
Changing the quantity of coee.......................................9
CLEANING .............................................. 10
Cleaning the coee maker .............................................10
Cleaning the waste coee container..............................10
Cleaning the drip tray ....................................................10
Cleaning the water tank.................................................10
Cleaning the spouts .......................................................10
Cleaning the pre-ground coee funnel..........................10
Cleaning the inside of the coee maker.........................10
Cleaning the brewing unit .............................................10
Cleaning the milk container...........................................11
CHANGING AND SETTING MENU PARAMETERS ....
11
Setting the language ....................................................12
Rinsing ..........................................................................12
Changing the length of time the appliance remains on .12
Setting the clock............................................................12
Setting auto-start time..................................................12
Changing coee temperature ........................................13
Setting water hardness .................................................13
Programming coee ......................................................13
Programming cappuccino..............................................13
Programming the jug.....................................................13
Programming water.......................................................13
Descale ..........................................................................13
Resetting default values (reset).....................................14
Statistics ........................................................................14
Buzzer ...........................................................................14
Adjusting contrast..........................................................14
TURNING THE APPLIANCE OFF ................. 14
TECHNICAL SPECIFICATION....................... 14
Disposing of the appliance.............................................15
DISPLAYED MESSAGES ............................. 16
TROUBLESHOOTING ................................ 17
RECIPES .................................................. 19

2 3
EN
INTRODUCTION
Symbols used in these instructions
Important warnings are identied by these symbols.
It is vital to respect these warnings.
Failure to observe the instructions could result in electric shock,
serious injury, burns, re or damage to the appliance.
Danger!
Failure to observe the warning could result in possibly life thre-
atening injury from electric shock.
Important!
Failure to observe the warning could result in injury or damage
to the appliance.
Danger of burns!
Failure to observe the warning could result in scalds or burns.
N.B.!
This symbol identies important advice or information for the
user.
Letters in brackets
The letters in brackets refer to the legend in the Description of
the Appliance on page 3.
Troubleshooting and repairs
In the event of problems, follow the information given in the
sections“Displayed messages”and“Troubleshooting”.
If this does not resolve the problem, you should consult Custo-
mer Services. For repairs, contact Customer Services only.
SAFETY
Fundamental safety warnings
The appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
Never immerse the appliance in water.
This is an household appliance only. It is not intended to be used in: sta kitchen areas in
shops, oces and other working environments; farm houses; by clients in hotels, motels and
other residential type environments; bed and breakfast type environments.
If the plug or power cable is damaged, it must be replaced by customer services only to avoid
all risk.
FOR EUROPEAN MARKETS ONLY:
This appliance can be used by children aged from 8 years and above if they have been given
supervision or instruction concerning use of the appliance in a safe way and if they under-
stand the hazard involved. Cleaning and user maintenance shall not be made by children
unless they are older than 8 and supervised. Keep the appliance and its cord out of the reach

4
EN
Danger! This is an electrical appliance, it is therefore
important to respect the following safety warnings:
• Nevertouchtheappliancewithdamphands.
• Nevertouchtheplugwithdamphands.
• Makesurethesocketusedisfreelyaccessibleatalltimes,
enabling the appliance to be unplugged when necessary.
• Unplugdirectlyfromtheplugonly.
Never pull the power cable as you could damage it.
• To disconnect the appliance completely, place the main
switch (A23) on the side of the appliance in the 0 position.
• Iftheapplianceisfaulty,donotattempttorepair.
Turn it o using the main switch (A23), unplug from the
mains socket and contact Customer Services.
Important! Keep all packaging (plastic bags, polysty-
rene foam) away from children.
Danger of burns! This appliance produces hot water
and steam may form while it is in operation.
Avoid contact with splashes of water or hot steam.
Use knobs and handles.
Important! Do not grasp the coee maker when it is
out of the cabinet. Do not rest recipients containing liquids or
inammable or corrosive materials on top of the appliance. Place
the accessories required to make the coee (the measure for ex-
ample) in the special holder. Do not rest large objects which
could obstruct movement or unstable objects on the appliance.
Important! Do not use the appliance when extracted.
Make sure the appliance is inactive before extracting it. The only
exception is adjusting the coee mill which must be done with
the machine out (see the section“Adjusting the coee mill”).
N.B.: Use original or manufacturer recommended acces-
sories and spare parts only.
Designated use
This appliance is designed and made to prepare coee and heat
drinks. All other use is considered improper.
This appliance is not suitable for commercial use. The manufac-
turer is not liable for damage deriving from improper use of the
appliance. This appliance can be installed over a built-in oven if
the latter is tted with a cooling fan at the rear (maximum mi-
crowave power: 3 kW).
Instructions
Read these instructions carefully before using the appliance.
• Keeptheseinstructions
• Failuretorespecttheseinstructionsmayresultinburnsor
damage to the appliance.
The manufacturer is not liable for damage deriving from
failure to respect these instructions.
N.B.! The appliance has a cooling fan.
This comes on whenever coee, steam or hot water is delivered.
After several minutes, the fan goes o automatically.
DESCRIPTION
Description of the appliance
(page 3 - A)
A1. Cup tray
A2. Service door
A3. Coee guide
of children aged less than 8 years.
Appliances can be used by persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision or instruction con-
cerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
When not in use and before cleaning, always unplug the appliance.
Surfaces marked with this symbol become hot during use (the symbol is present in
certain models only).

4 5
EN
A4. Waste coee container
A5. Brewing unit
A6. Cup tray lights
A7. On/OFF/stand-by button
A8. Control panel
A9. Tray
A10. Hot water and steam nozzle
A11. IEC connector
A12. Water tank
A13. Coee spout (adjustable height)
A14. Drip tray
A15. Bean container lid
A16. Bean container
A17. Grinding adjustment knob
A18. Pre-ground coee funnel door
A19. Measure
A20. Compartment for measure
A21. Pre-ground coee funnel
A22. Power cable
A23. Main switch
Description of the control panel
(page 3 - B)
N.B.! A light touch is enough to activate the icon.
B1. Display: guides the user in using the appliance.
B2. MENU icon to activate or deactivate menu parameter set-
ting mode
B3. icon to turn lights A6 on and o
B4. icon to select the coee taste
B5. icon to select the type of coee (espresso, small cup,
medium cup, large cup, mug)
B6. icon to exit the selected mode
B7-B8. icons to scroll forwards or backwards through the
menu and display the various modes
B9. OK icon to conrm the selected function
B10. icon to deliver a cup of coee
B11. icon to deliver two cups of coee
B12. icon to deliver cappuccino
B13. icon to deliver hot water
Description of milk container and accesso-
ries
(page 3 - C)
C1. Frothed milk regulator
C2. Milk container handle
C3. CLEAN button
C4. Milk intake tube
C5. Frothed milk spout
C6. Milk frother
C7. Hot water spout
PRELIMINARY CHECKS
Controls after transport
After removing the packaging, make sure the product is com-
plete and undamaged and that all accessories are present.
Do not use the appliance if it is visibly damaged.
Contact Customer Services.
Installing the appliance
Important!
• Installationmustbeperformedbyaqualiedprofessional
in compliance with legislation in force in the country of in-
stallation (see Built-in installation).
• Thepackingelements(plasticbags,polystyrenefoam,etc.)
should be kept out of reach of children.
• Donotinstalltheapplianceinroomswherethetempera-
ture may drop to 0°C or lower.
• Customisethewaterhardnessassoonaspossiblefollowing
the instructions in the“Setting water hardness”section.
Connecting the appliance
Danger! Check that the mains power supply voltage
corresponds to the value indicated on the rating plate on the
bottom of the appliance. Connect the appliance to an eciently
earthed and correctly installed socket with a minimum current
rating of 10A only. If the power socket does not match the plug
on the appliance, have the socket replaced with a suitable type
by a qualied professional. To comply with safety directives, an
omnipolar switch with a minimum contact distance of 3 mm
must be installed. Do not use multiple sockets or extensions.
Important! Safety cutout devices must be included
in the mains power supply in compliance with the installation
regulations in the country concerned.

6
EN
USING THE APPLIANCE FOR THE
FIRST TIME
• Coeehasbeenusedtofactorytesttheapplianceanditis
therefore completely normal for there to be traces of coee
in the mill.
• Customisewaterhardnessassoonaspossiblefollowingthe
instructions in the“Setting water hardness”section.
1. Connect the appliance to the mains supply.
Set the required language.
2. To set the language, use the icons (B7 and B8) to
choose the required language (g. 2). When the message
“PRESS OK TO CHOOSE ENGLISH”is displayed, press the OK
icon (B9) (g. 3) for 3 seconds until “ENGLISH INSTALLED”
is displayed. If you set the wrong language, follow the in-
structions in the“Setting the language”section.
If your language is not available, select one from those dis-
played. The instructions refer to the English version.
Then follow the instructions displayed:
3. After 5 seconds, the appliance displays“FILL TANK”. Extract
the water tank (g. 4), rinse and ll with fresh water with-
out exceeding the MAX line. Replace and push as far as it
will go.
4. Place a cup under the hot water spout (g. 5). (If the hot
water spout is not inserted, the appliance displays“INSERT
WATER SPOUT”. Attach it as shown in gure 6.
The appliance displays:“HOTWATER PRESS OK”.
Press the OK icon (B9) (g. 3) and after a few seconds a little
water comes out of the spout.
5. The machine now displays “TURNING OFF... PLEASE WAIT”
and goes o.
6. Extract the appliance by pulling it out using the handles
(g. 7). Open the lid and ll the container with coee
beans, then close the lid and push the appliance in.
The coee maker is now ready for normal use.
Important! Never introduce pre-ground coee, freeze
dried coee, caramelised beans or anything else which could
damage the appliance.
N.B.! When using the appliance for the rst time, you
need to make 4-5 cups of coee and 4-5 cappuccinos before the
appliance gives satisfactory results.
N.B.! Each time you turn the coee maker on by the ON/
OFF switch (A23), it performs a SELF-DIAGNOSIS cycle and then
goes o. To turn it on again, press the ON/OFF button (A7) (g. 1)
TURNING ON AND HEATING UP
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted. The appli-
ance is ready for use only after completion of this cycle.
Danger of burns! During rinsing, a little hot water
ows from the coee spouts.
To turn the appliance on, press the ON/OFF/stand-by button (A7)
(g. 1).The message“HEATING UP... PLEASE WAIT”is displayed.
When heating is complete, the message changes to“RINSING”;
The appliance is at temperature when the message “MEDIUM
CUP NORMALTASTE”is displayed.
If no icon is pressed within about 2 minutes, the time (if set, see
the“Setting the clock”section) is displayed.
If the time has not been set, the appliance displays the last func-
tions set.
When any icon is pressed, “MEDIUM CUP NORMAL TASTE” is dis-
played again.The appliance is ready to make coee again.
MAKING COFFEE USING COFFEE
BEANS
1. The appliance is preset to make coee with a normal taste.
You can also choose coee with an extra-mild, mild, strong
or extra-strong taste. There is also a pre-ground coee op-
tion. To choose the required taste, press the icon (B4)
(g. 8) a number of times. The required coee taste is dis-
played.
2. Place 1 cup under the spouts to make 1 coee (g. 9) or 2
cups for 2 coees (g. 9). Lower the spouts as near as possi-
ble to the cup for a creamier coee (g. 10).
3. Press the icon (B5) (g. 11) to select the type of cof-
fee: espresso, small cup, medium cup, large cup, mug. Now
press the icon (B10) (g. 12) if you want to make a cof-
fee and the icon (B11) (g. 13) if you want to make
2 coees. The appliance now grinds the beans and starts
delivering the coee into the cup.
Once the set amount of coee has been delivered, the ma-
chine stops delivery automatically and expels the exhaust-
ed waste coee into the waste coee container.
4. After a few seconds, the appliance is ready for use again.
5. To turn the appliance o, press the ON/OFF/stand-by but-
ton (A7) (g. 1). (Before going o, the appliance performs
an automatic rinse cycle.Take care to avoid scalds).
NOTE 1: If the coee is delivered a drop at a time or not at all, see
the“Adjusting the coee mill”section.

6 7
EN
NOTE 2: If the coee is delivered too fast and the cream is not
satisfactory, see the“Adjusting the coee mill”section.
NOTE 3:Tips for a hotter coee:
• Proceedasdescribedinthesection“Changingandsetting
menu parameters”,“Rinse”function.
• Unlesspreheated,donotuseexcessivelythickcupsasthey
will absorb too much heat.
• Preheatthecupsbyrinsingthemwithhotwater.
NOTE 4: Coee delivery can be interrupted at any moment by
re-pressing the previously selected icon which remains lit during
the operation.
NOTE 5: As soon as delivery is nished, to increase the quantity of
coee in the cup, just keep pressing the previously selected icon
within 3 seconds after delivery has nished.
NOTE 6: When the appliance displays “FILL TANK”, ll the tank
with water or the appliance will not deliver coee.
(It is normal for there to be a little water left in the tank).
NOTE 7: After about 14 single (or 7 double) coees, the appliance
displays“EMPTY WASTE COFFEE CONTAINER”.
Even if not full, the empty waste coee container message is dis-
played 72 hours after the rst coee has been delivered. For the
72 hours to be calculated correctly, the machine must never be
turned o with the main switch in the 0 position.
To clean, open the service door on the front of the appliance
by pulling the spout (g. 16), extract the drip tray (g. 17) and
clean.
When cleaning, always extract the drip tray completely.
Important! When extracting the drip tray, the waste
coee container MUST always be emptied.
If this is not done, the machine may be clogged.
NOTE 8: Never extract the water tank while the machine is de-
livering coee.
If it is removed, it will not be possible to make the coee and
the appliance will display“GROUND TOO FINE ADJUST MILL AND
PRESS OK”and then“FILL TANK”. Check the level of water in the
tank and replace in the appliance.
To turn the appliance back on, insert the water spout if not al-
ready in place (g. 6), then press the OK icon (B9). “HOT WATER
PRESS OK”is displayed.
Press the OK icon (B9) within a few seconds and deliver water
from the spout for about 30 seconds. When delivery stops, the
basic modes are displayed again.
N.B.: The coee maker may request the operation to be
repeated a number of times until the air is completely elminated
from the hydraulic circuit.
N.B.: if this operation is not performed correctly or if
the machine is turned o, the basic modes may be displayed,
although the problem is in fact still present.
CHANGING THE QUANTITY OF COF
FEE IN THE CUP
The appliance is set by default to automatically make the follow-
ing types of coee:
• espresso
• smallcup
• mediumcup
• largecup
• mug
To change the quantity, proceed as follows:
• PresstheMENUicon(B2)toenterthemenu(g.15).Press
the icons (B7) and (B8) (g. 2) until “PROGRAM
COFFEE”is displayed.
• PresstheOKicon(B9).
• Selectthetypeofcoeeyouwanttochangebypressing
the icons (B7) and (B8).
• PresstheOK icon(B9) to conrmthe typeofcoee you
want to make.
• Usethe icons (B7) and (B8) to change the quantity
of coee. The progress bar shows the quantity of coee se-
lected.
• PresstheOKicon(B9)againtoconrm(orthe icon (B6)
to cancel the operation).
• Pressthe icon (B6) (g. 18) twice to exit the menu.
The appliance is now reprogrammed with the new settings and
is ready.

8
EN
ADJUSTING THE COFFEE MILL
The coee mill is preset in the factory and should not require
adjusting. However, if after making the rst few coees you nd
that delivery is either too fast or too slow (a drop at a time), this
can be corrected by adjusting the grinding adjustment knob (g.
14).
Important! The grinding adjustment knob must only
be turned when the coee mill is in operation.
For slower delivery and creamier coee, turn one click anticlock-
wise (ner pre-ground coee).
For faster delivery (not a drop at a time), turn one click clockwise
(coarser pre-ground coee).
PREPARING COFFEE WITH PRE
GROUND COFFEE INSTEAD OF
BEANS
• Pressthe (B4) icon (g. 8) and select the pre-ground
coee function.
• Extractthemachinebypullingitoutwardsusingthehan-
dles (g. 7).
• Liftthecentrallid,placeonemeasureofpre-groundcoee
in the funnel (g. 19), push the appliance in then proceed
as described in the section “Making coee using coee
beans”.
N.B.:You can make just one coee at a time by pressing the
icon (B10) (g. 12).
• Afterusingthemachinewithpre-groundcoee,togoback
to making coee using beans, deactivate the pre-ground
coee function by pressing the icon (B4) (g. 8).
NOTE 1: Never introduce pre-ground coee when the machine is
o or it could spread through the inside of the appliance.
NOTE 2: Never add more than 1 measure, otherwise the appli-
ance will not make the coee.
NOTE 3: Use the measure provided only.
NOTE 4: Introduce only pre-ground coee for espresso coee
machines into the funnel.
NOTE 5: If more than one measure of pre-ground coee is used
and the funnel clogs, push the coee down with a knife (g. 21)
then remove and clean the brewing unit and machine as de-
scribed in the“Cleaning the brewing unit”section.
DELIVERING HOT WATER
• Alwaysmakesuretheapplianceisready.
• Turnthecappuccinomakeroutwardsandplaceacontainer
underneath (g. 6).
• Pressthe icon (B13) (g. 20). The appliance displays:
“HOT WATER PRESS OK”. Press the OK icon (B9) again and
hot water is delivered from the cappuccino maker into the
container underneath. (You should not deliver hot water
for more than 2 minutes at a time). To interrupt, press the
icon (B13) or the icon (B6). The appliance stops
delivery once the set quantity is reached.
CHANGING THE QUANTITY OF HOT
WATER
The machine is set by default to automatically delivery 200 ml
of hot water.
To change these quantities, proceed as follows:
• Placeacontainerunderneaththecappuccinomaker(g.5).
• PresstheMENU(B2)toenterthemenu(g.15)orpressthe
icons (B7) and (B8) (g. 2) until “PROGRAM HOT
WATER”is displayed.
• PresstheOKicon(B9)toconrm.
• Select the required quantity of water by pressing the
icons (B7) and (B8). The progress bar shows the
quantity of water selected.
• PresstheOKicon(B9)toconrm(orthe icon (B6) to
cancel the operation.
• Pressthe icon (B6) (g. 18) twice to exit the menu.
• Theapplianceisnowreprogrammedwiththenewsettings
and is ready.
MAKING CAPPUCCINO
N.B.: Set the quantity of coee you want to use to make
the cappuccino in the “Program cappuccino” function in the
menu.
• Selectthetasteofthecoeeyouwanttousetomakethe
cappuccino by pressing the icon (B4).
• Removethelidofthemilkcontainer.
• Fillthecontainerwithabout100 grams ofmilkforeach

8 9
EN
cappuccino to be prepared (g. 23). Never exceed the MAX
level (corresponding to about 750 ml) marked on the con-
tainer. You should ideally use skimmed or semi-skimmed
milk at refrigerator temperature (about 5°C).
• Makesuretheintaketubeiscorrectlyinsertedintherubber
washer (g. 24) then replace the milk container lid.
• Positionthefrothedmilkregulator(C1)betweenthewords
CAPPUCCINO and CAFFELATTE printed on the milk container
lid.
The quantity of froth can be adjusted by moving the regu-
lator towards the word CAFFELATTE for a denser froth. Mov-
ing it towards the word CAPPUCCINO obtains a less dense
froth.
• Remove the hot water spout (g 6) and attach the milk
container to the nozzle (g. 25).
• Positionthemilkspoutasshowning.26andthenplacea
suciently large cup under the coee and milk spouts.
• Pressthe icon (g. B12). “CAPPUCCINO...” is displayed
and after a few seconds, frothed milk ows out of the milk
spout into the cup below. (La fuoriuscita del latte si inter-
rompe automaticamente). (Delivery stops automatically).
• Theappliancedeliverscoee.
• Thecappuccinoisnowready.Sweetentotasteand,ifde-
sired, sprinkle the froth with a little cocoa powder.
NOTE 1: While making cappuccino, the ow of frothed milk or
coee can be interrupted by pressing the icon (B12).
NOTE 2: If the milk in the container nishes while delivering
frothed milk, remove the container and add milk. Reattach and
press the (B12) to request a cappuccino again.
NOTE 3: To ensure the complete cleanliness and hygiene of the
milk frother, always clean the circuits in the milk container lid
after making cappuccino.
“PRESS CLEAN!”ashes on the display.
• Placearecipientunderthemilkspout(g.26).
• PresstheCLEANbuttononthelid(C3)andholddownforat
least 5 seconds (g. 26) to start the cleaning function.
The appliance displays the message “CLEANING!” above a
progressive bar.
You should not release the CLEAN button until the bar is
complete indicating that cleaning is concluded.
When the CLEAN button is released, the function stops.
After cleaning, remove the milk container and place in the
refrigerator.
The milk should not be left out of the refrigerator for more
than 15 minutes.
NOTE 4:To change the quantity of coee or frothed milk the ap-
pliance delivers automatically into the cup, proceed as described
in the section“Changing the quantity of coee and milk for cap-
puccino”.
CHANGING THE QUANTITY OF COF
FEE AND MILK FOR CAPPUCCINO
The appliance is set by default to automatically deliver a normal
cappuccino.
To change these quantities, proceed as follows:
Changing the quantity of milk
• Fillthecontainerwithmilkuptothemaximumlevelindi-
cated on the container.
• PresstheMENUicon(B2)toenterthemenu(g.15),then
press the icons (B7) and (B8) (g. 2) until “PRO-
GRAM CAPPUCCINO”is displayed.
• PresstheOKicon(B9)toconrm.“PROGRAMMILK”isdis-
played.
• PresstheOKicon(B9)again.
• Selectthequantityofmilkrequiredbypressingthe
icons (B7) and (B8). The progress bar shows the quantity of
milk selected.
• PresstheOKicon(B9)toconrm(orthe icon (B6) to
cancel the operation.
• Pressthe icon (B6) (g. 18) twice to exit the menu.
Changing the quantity of coee
• PresstheMENUicon(B2)toenterthemenu(g.15),then
press the icons (B7) and (B8) (g. 2) until “PRO-
GRAM CAPPUCCINO”is displayed.
• PresstheOKicon(B9)toconrmthenthe icons
(B7 and (B8) (g. 2) until “COFFEE FOR CAPPUCC.” is dis-
played.
• PresstheOKicon(B9)again.
• Select the quantity of coee required by pressing the
icons (B7) and (B8). The progress bar shows the
quantity of coee selected.
• PresstheOKicon(B9)toconrm(orthe icon (B6) to
cancel the operation.
• Pressthe icon (B6) (g. 18) twice to exit the menu.
NO froth
“Denser”froth
frothed milk regulator
“Less dense”froth

10
EN
CLEANING
Cleaning the coee maker
Do not use solvents or abrasive detergents to clean the coee
maker. A soft damp cloth will suce.
Never wash any of the components of the coee maker in the
dishwasher.
The following parts of the machine must be cleaned regularly:
• Wastecoeecontainer(A4).
• Driptray(A14).
• Watertank(A12).
• Coeespouts(A13)
• Pre-groundcoeefunnel(A21).
• nsideofthemachine,accessibleafteropeningtheservice
door (A2).
• Brewingunit(A5).
Cleaning the waste coee container
When “EMPTY WASTE COFFEE CONTAINER” is displayed, the
waste coee container must be emptied and cleaned.
To clean:
• opentheservicedooronthefrontoftheappliance(g.16),
extract the drip tray (g. 17) and clean.
• Cleanthewastecoeecontainerthoroughly.
Important! When extracting the drip tray, the waste
coee container must always be emptied.
Cleaning the drip tray
Important! If the drip tray is not emptied the water
might overow.
This could damage the machine.
The drip tray is tted with a level indicator (red) showing the
level of water it contains (g. 28).
Before the indicator protrudes from the cup tray, the drip tray
must be emptied and cleaned.
To remove the tray:
1. Open the service door (g. 16).
2. Remove the drip tray and the waste coee container (g.
17).
3. Clean the drip tray and waste coee container (A4).
4. Replace the drip tray and waste coee container (A4).
5. Close the service door.
Cleaning the water tank
1. Clean the water tank (A12) regularly (about once a month)
with a damp cloth and a little mild washing up liquid.
2. Remove all traces of washing up liquid.
Cleaning the spouts
1. Clean the nozzles periodically using a sponge.
2. Check regularly that the holes in the coee spout are not
blocked.
If necessary, remove coee deposits with a toothpick (g.
27).
Cleaning the pre-ground coee funnel
• Checkregularly(aboutonceamonth)thatthepre-ground
coee funnel is not blocked (g. 21).
Danger! Before performing any cleaning operations,
the machine must be turned o by pressing the main switch
(A23) and unplugged from the mains power supply.
Never immerse the coee maker in water.
Cleaning the inside of the coee maker
1. Check regularly (about once a week) that the inside of the
appliance is not dirty.
If necessary, remove coee deposits with a sponge.
2. Remove the residues with a vacuum cleaner (g. 30).
Cleaning the brewing unit
The brewing unit must be cleaned at least once a month.
Important! The brewing unit (A5) must not be re-
moved when the appliance is on.
Do not use force to remove the brewing unit.
1. Make sure the machine is correctly turned o (see“Turning
the appliance o”).
2. Open the service door (g. 16).
3. Remove the drip tray and waste coee container (g. 17);
4. Press the two red release buttons inwards and at the same
time pull the brewing unit outwards (g. 31).
Important! Do not use washing up liquid to clean the
brewing unit. It would remove the lubricant applied to the inside
of the piston.
5. Soak the brewing unit in water for about 5 minutes, then
rinse.
6. After cleaning, replace the brewing unit (A5) by sliding it

10 11
EN
onto the internal support and pin at the bottom, then push
the PUSH symbol fully in until it clicks into place.
N.B.: If the brewing unit is dicult to insert, you must
rst adapt it to the right dimensions by pressing it forcefully
from the bottom and top as shown in the gure.
7. Onceinserted,makesurethetwo redbuttons havesnapped
out.
8. Replace the drip tray and waste coee container.
9. Close the service door.
Cleaning the milk container
Important! Always clean the tubes inside the milk
container (C) when you prepare milk.
If there is still milk in the container, do not leave it out of the
refrigerator for longer than strictly necessary.
Clean the container each time you prepare milk as described in
Note 3 in the section“Making cappuccino”.
All components can be washed in a dishwasher, placing them in
the top basket of the dishwasher.
1. Turn the lid of the milk container clockwise then remove it.
2. Remove the milk spout and intake tube.
Groove
Frothed milk regulator
3. Remove the frothed milk regulator by pulling it outwards.
4. Wash all the components thoroughly with hot water and
mild washing-up liquid.
Make sure there are no milk residues left inside the holes
and the groove on the ne end of the frothed milk regula-
tor.
5. Check that the intake tube and spout are not clogged with
milk residues.
6. Replace the frothed milk regulator, milk spout and intake
tube.
7. Replace the milk container lid.
CHANGING AND SETTING MENU
PARAMETERS
When the appliance is ready, you can use the internal menu to
modify the following parameters and functions:
• Chooselanguage
• Rinsing
• Shut-otime
• Setclock
• Starttime
• Auto-start
• Temperature
Support
Pin
spout
milk intake tube
Hole
Hole

12
EN
• Waterhardness
• Programcoee
• Programcappuccino
• Programjug(notpresent)
• Programwater
• Descale
• Resettodefault
• Statistics
• Buzzer
• Contrast
Setting the language
To change the language on the display, proceed as follows:
• PresstheMENUicon(B2)toenterthemenu.“CHOOSELAN-
GUAGE”is displayed.
• PresstheOKicon(B9).
• Pressthe icons (B7) and (B8) until the required lan-
guage is displayed.
• PresstheOKicon(B9)toconrm.
• Pressthe icon (B6) to exit the menu.
N.B.: If you choose the wrong language, you can access
the menu directly to modify the parameter.
• PresstheMENUicon(B2)foratleast7secondsuntilthe
appliance displays the various languages.
• Choosetherequiredlanguageasdescribedinthesection
“Using the appliance for the rst time”.
Rinsing
This function enables you to obtain hotter coee.
Proceed as follows:
• Whenyouturn theappliance on, if you want tomakea
small cup of coee (less than 60 cc), preheat the cup by
rinsing it with hot water.
• Ifontheotherhandmorethan2/3minuteshavepassed
since the last coee was made, before requesting another
coee, you must preheat the brewing unit by rst pressing
the MENU icon (B2) to enter the menu then the
icons (B7) and (B8) to select the“RINSING”function.
Press the OK icon (B9).
“RINSING... PLEASE CONFIRM”is displayed.
Press the OK icon (B9) again.
Deliver the water into the underlying drip tray or alterna-
tively use this water to ll (and then empty) the cup to be
used for the coee to preheat it.
Changing the length of time the appliance
remains on
The appliance is set by default to go o automatically 30 minutes
after the last coee has been made.
To change this interval (max. 120 min), proceed as follows:
• PresstheMENUicon(B2)toenterthemenuandthenthe
icons (B7) and (B8) until “SHUT-OFF TIME” is dis-
played.
• PresstheOKicon(B9)toconrm.
• Pressthe icons (B7) and (B8) to set the time after
which the appliance will go o (after 1/2 hour, 1 hour, 2
hours).
• PresstheOKicon(B9)toconrm.
• Pressthe icon (B6) to exit.
Setting the clock
• PresstheMENUicon(B2)toenterthemenuandthenthe
icons (B7) and (B8) until“SET CLOCK”is displayed.
• PresstheOKicon(B9).
• Usethe icons (B7) and (B8) to set the hour, then
press the OK icon (B9) to conrm.
• Usethe icons (B7) and (B8) to set the minutes, then
press the OK icon (B9) to conrm.
• Pressthe icon (B6) to exit the menu.
Setting auto-start time
This function programmes the time the machine will come on
automatically.
• Makesuretheclockontheappliancehasbeenset.•
Press the MENU icon (B2) to enter the menu and then the
icons (B7) and (B8) until“STARTTIME”is displayed.
• PresstheOKicon(B9).
• Usethe icons (B7) and (B8) to set the auto-start
time, then press the OK icon (B9) to conrm.
• Usethe icons (B7) and (B8) to set the minutes, then
press the OK icon (B9) to conrm.
• Pressthe icons (B7) and (B8) to activate the au-
to-start function until“AUTO START”is displayed.
• “AUTOSTARTPLEASECONFIRM”isdisplayed.PRESSTHE OK
ICON B9. The symbol appears on the display.
• Pressthe icon (B6) to exit the menu.
• Todisableauto-start,presstheMENUicon(B2),thenthe
icons (B7) and (B8) until“AUTO START”is displayed.
Press the OK icon (B9).
“PLEASE CONFIRM”is displayed
Press icon (B6) to disable, the symbol disappears .

12 13
EN
Changing coee temperature
To change coee temperature, proceed as follows:
• PresstheMENUicon(B2)toenterthemenuandthenthe
icons (B7) and (B8) until “TEMPERATURE” is dis-
played.
• PresstheOKicon(B9).
• Pressthe icons (B7) and (B8) to select the required
coee temperature from low, medium and high.
• PresstheOKbutton(B9)toconrmthetemperatureselect-
ed.
• Pressthe icon (B6) to exit the menu.
Setting water hardness
The operating period can be extended if required, making desca-
ling less frequent by programming the machine on the basis of
the real lime content in the water used.
Proceed as follows:
• removethe“TotalHardnessTest”strip(attachedtopage2)
from its packaging then dip it fully in the water for a few
seconds,
Then remove and wait about 30 seconds (until it changes
colour and forms red squares).
• turn the appliance on by pressing the ON/OFF/stand-by
button (A7).
• PresstheMENUicon(B2)toenterthemenuandthenthe
icons (B7) and (B8) until“WATER HARDNESS”is dis-
played.
• PresstheOKicon(B9).
• Pressthe icons (B7) and (B8) until the number co-
incides with the number of red squares on the test strip (for
example, if there are 3 red squares on the test strip, select
the message“WATER HARDNESS 3”
• PresstheOKicon(B9)toconrm.
The coee maker is now programmed to provide the des-
cale warning when actually necessary.
Programming coee
For instructions on programming coee, see the“CHANGINGTHE
QUANTITY OF COFFEE INTHE CUP”section.
Programming cappuccino
For instructions on programming cappuccino, see the section
“CHANGING THE QUANTITY OF MILK AND COFFEE FOR CAPPUC-
CINO”.
Programming the jug
This function is not supported by this model.
Programming water
For instructions, see the“CHANGING THE QUANTITY OF HOT WA-
TER”section.
Descaling
Important! Descaler contains acids.
Respect the safety warnings provided by the manufacturer and
given on the descaler pack.
N.B.: Use the descaler recommended by the manufac-
turer only.
Use of other descalers invalidates the guarantee.
Failure to descale the appliance as described also invalidates the
guarantee.
When “PLEASE DESCALE !” is displayed, the machine requires
descaling.
Proceed as follows:
• makesurethemachineisready;
• PresstheMENUicon(B2)toenterthemenuandthenthe
icons (B7) and (B8) until“DESCALE”is displayed.
• PresstheOKicon(B9).
The message “ADD DESCALER PLEASE CONFIRM” is dis-
played.
• Emptythetankofwater,pourthecontentsofthedescaler
bottle into the tank respecting the instructions given on the
descaler pack, then add water.
Position a container with a capacity of about 2 litres under
the hot water spout.
• PresstheOKicon(B9).Descalerowsoutofthehotwater
spout into the container below.
The appliance displays:“DESCALING”.
• Thedescaleprogrammeautomaticallyperformsaseriesof
deliveries and pauses.
• Afterabout30minutes“DESCALECOMPLETEPLEASECON-
FIRM”is displayed.
• PresstheOKicon(B9).“RINSINGFILLTANK”isdisplayed.
• Emptythewatertank,rinsetoeliminatedescalerresidues,
then ll with clean water.
• Replacethetankfullofcleanwater.
“RINSING PLEASE CONFIRM”is displayed again.
• PresstheOKicon(B9)again.
Hot water ows out of the spout into the container below
and“RINSING”is displayed.
• Wait until“RINSING COMPLETE PLEASE CONFIRM” is dis-
played.
• PresstheOKicon(B9).

14
EN
“DESCALE COMPLETE”is displayed, then“FILL TANK!”.
Fill the tank again with clean water.
• Thedescaleprogrammeisnowterminatedandtheappli-
ance is ready to make coee again.
NOTE: If descaling is interrupted before completion, the
process must be begun again from the beginning.
Important! FAILURE TO DESCALETHE APPLIANCE REG-
ULARLY INVALIDATES THE GUARANTEE.
Resetting default values (reset)
If you change the original values, the default values can be reset
as follows:
• PresstheMENUicon(B2)toenterthemenuandthenthe
icons (B7) and (B8) until“RESET TO DEFAULT”is dis-
played.
• PresstheOKicon(B9)andtheappliancedisplays“RESETTO
DEFAULT PLEASE CONFIRM”.
• presstheOKbutton(B9)toresetthedefaultvalues;
Statistics
This displays statistics relating to the machine.
To display, proceed as follows:
• PresstheMENUicon(B2)toenterthemenuandthenthe
icons (B7) and (B8) until“STATISTICS”is displayed.
• PresstheOKicon(B9).
• Pressthe icons (B7) and (B8) to verify:
• Howmanycoeesandcappuccinoshavebeenmade.
• Howmanytimesthemachinehasbeendescaled.
• Howmanycappuccinoshavebeenmade;
• Thetotalnumberoflitresofwaterdelivered.
• Pressthe icon (B6) once to exit the function or twice to
exit the menu.
Buzzer
This activates or deactivates the buzzer emitted by the machine
each time an icon is pressed or an accessory is inserted/removed.
N.B.: The buzzer is active by default.
• PresstheMENUicon(B2)toenterthemenuandthenthe
icons (B7) and (B8) until“BUZZER”is displayed.
• PresstheOKicon(B9).“BUZZERPLEASECONFIRM”isdis-
played.
• Pressthe icon (B6) to disable or the OK icon (B9) to en-
able the buzzer.
• Pressthe icon (B6) to exit the menu.
Adjusting contrast
To increase or reduce the contrast of the display, proceed as fol-
lows:
• PresstheMENUicon(B2)toenterthemenuandthenthe
icons (B7) and (B8) until“CONTRAST”is displayed.
• PresstheOKicon(B9).
• Pressthe icons (B7) and (B8) until the required dis-
play contrast is reached. The progressive bar indicates the
level of contrast selected.
• PresstheOKicon(B9)toconrm.
• Pressthe icon (B6) once to exit the function or twice to
exit the menu.
TURNING THE APPLIANCE OFF
Each time the appliance is turned o, it performs an automatic
rinse cycle which cannot be interrupted.
Danger of burns! During rinsing, a little hot water
ows from the coee spouts.
Avoid contact with splashes of water.
To turn the appliance o, press the ON/OFF button (A7).
The appliance performs the rinse cycle then goes o.
N.B.! If the appliance is not used for an extended peri-
od, place the main switch on the back of the appliance in the 0
position (A23).
TECHNICAL SPECIFICATION
Voltage: 220-240 V~ 50/60 Hz max. 10A
Absorbed power: 1350W
Pressure: 15 bars
Water tank capacity: 1.8 litres
Size LxHxD: 594x 455x411 mm
Weight: 23/24 kg
The appliance complies with the following EC directives:
• LowVoltageDirective2006/95/ECandsubsequentamend-
ments;
• EMCDirective2004/108/ECandsubsequentamendments
• ECRegulation1275/2008forstandby.
Materialsand accessoriescominginto contact with foodconform
to European regulation (EC) no. 1935/2004.

14 15
EN
Disposing of the appliance
The appliance must not be disposed of with household waste,
but taken to an authorised waste separation and recycling cen-
tre.

16
EN
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY
FILLTANK! The water tank is empty or positioned
incorrectly.
Fill the tank with water and/or insert it correctly,
pushing it as far as it will go.
GROUND TOO FINE ADJUST MILL AND
alternating with PRESS OK
The grinding is too ne and the coee
is delivered too slowly.
Turn the grinding adjustment knob one click
clockwise towards“7”.
GROUNDTOO FINE ADJUST MILL AND
(alternating with)
PRESS OK
(then)
FILLTANK
The tank has been removed during
delivery.
Insert the tank and press the OK icon (B9).
“HOTWATER PRESS OK”is displayed.
Press the OK icon (B9) again.
The appliance is once again ready for use.
EMPTY WASTE COFFEE CONTAINER The waste coee container (A4) is too
full or more than 3 days have pas-
sed since you last made coee (this
guarantees correct hygiene of the
machine).
Empty the waste coee container and clean,
then replace.
Important: when removing the drip tray, the wa-
ste coee container MUST be emptied, even if it
is not completely full.
If this is not done, when you make the next cof-
fees, the waste coee container may ll up more
than expected and clog the machine.
INSERTWASTE COFFEE CONTAINER After cleaning, the waste coee con-
tainer has not been replaced.
Open the service door and insert the waste coee
container.
INSERIRE CAFFÈ PREMACINATO The “pre-ground coee” function has
been selected without placing any
pre-ground coee in the funnel.
The funnel (A21) is blocked.
Extract the appliance and place pre-ground cof-
fee in the funnel.
Empty the funnel with the help of a knife as de-
scribed in the section “Cleaning the pre-ground
coee funnel”.
PLEASE DESCALE! The machine must be descaled. The descaling procedure described in the“Desca-
ling” section needs to be performed as soon as
possible.
LESS COFFEE Too much coee has been used. Select a milder taste or reduce the quantity of
pre-ground coee, then make the coee again.
FILL BEAN CONTAINER The coee beans have run out. Fill bean container
INSERT BREWING UNIT The brewing unit has not been repla-
ced after cleaning.
Insert the brewing unit as described in the sec-
tion“Cleaning the brewing unit”.
CLOSE DOOR The service door is open Close the service door.
GENERAL ALARM! The inside of the appliance is very
dirty.
Clean the inside of the appliance thoroughly, as
described in the section “Cleaning and mainte-
nance”.
If the message is still displayed after cleaning,
contact a customer services.
DISPLAYED MESSAGES

16 17
EN
TROUBLESHOOTING
Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact Custo-
mer Services.
PROBLEM POSSIBLE CAUSE REMEDY
The coee is not hot The cups were not preheated.
The brewing unit has cooled down be-
cause 2/3 minutes have elapsed since the
last coee was made.
The temperature set is too low.
Warm the cups by rinsing them with hot
water.
Before making coee, preheat the
brewing unit by selecting the RINSING
function in the menu.
Change the set temperature (see para-
graph“Changing coee temperature”).
The coee is not creamy enough The coee is ground too coarsely.
Wrong type of coee.
Turn the grinding adjustment knob one
click anticlockwise towards“1” while the
coee mill is in operation (g. 14).
Use a type of coee for espresso coee
makers.
The coee is delivered too slowly or a
drop at a time.
The coee is ground too nely. Turn the grinding adjustment knob one
click clockwise towards“7”while the cof-
fee mill is in operation (g. 14).
Continue one click at a time until coee
delivery is satisfactory.
The eect is only visible after delivering
two coees.
The coee is delivered too quickly The coee is ground too coarsely. Turn the grinding adjustment knob one
click anticlockwise towards“1” while the
coee mill is in operation (g. 14).
Avoid turning the grinding adjustment
knob excessively otherwise when you
select 2 cups, the coee may be delivered
a drop at a time.
The eect is only visible after delivering
two coees.
Coee does not come out of one of the
spouts.
The spouts are blocked. Clean the spouts with a toothpick (g.
27).
The coee does not come out of the
spouts, but from around the service door
(A2).
The holes in the spouts are clogged with
dry coee dust.
The coee guide (A3) inside the service
door is blocked and cannot swing.
If necessary, remove coee deposits
with a toothpick, sponge or sti bristled
kitchen brush (g. 23).
Thoroughly clean the coee guide (A3),
particularly near the hinges.
Water comes out of the spouts instead of
coee.
The pre-ground coee may be blocked in
the funnel (A21).
Clean the funnel (A27) with a wooden
or plastic fork, clean the inside of the
machine.

18
EN
PROBLEM POSSIBLE CAUSE REMEDY
The milk does not come out of the milk
spout (C5).
The intake tube is not inserted or is inser-
ted incorrectly.
Insert the intake tube (C4) in the rubber
washer in the milk container lid (g. 24).
The milk is not well frothed. The milk container lid is dirty.
The frothed milk regulator is not positio-
ned correctly.
Clean the milk container lid as described
in the section “Cleaning the milk contai-
ner”.
Adjust following the instructions in the
section“Making cappuccino”.
The milk contains bubbles or squirts out
of the milk spout.
The milk is not cold enough or is not
semi-skimmed.
The frothed milk regulator is incorrectly
adjusted.
The milk container lid is dirty.
You should ideally use skimmed or
semi-skimmed milk at refrigerator tem-
perature (about 5°C). If the result is still
disappointing, try another brand of milk.
Move the frothed milk regulator slightly
towards the word“CAFFELATTE”(see sec-
tion“Making cappuccino”).
Clean the milk container lid as described
in the section “Cleaning the milk contai-
ner”.

18 19
EN
RECIPES
Coee punch
Ingredients (serves 6):
1/2 l of hot coee
1/2 l of white Port
1/2 l of rum
100 g of candied brown sugar
Method: Pour the coee into a pot, add the rum and the Port
and heat until it reaches boiling point. Gradually add the can-
died sugar, tasting now and then until suciently sweet. When
the sugar has dissolved serve in traditional, short stemmed
glasses.
Emperor’s coee
Ingredients (serves 3):
3 espresso coees
3 egg yolks
3 teaspoons of sugar
3 dl of milk
2 small glasses of brandy
Method: Beat the egg yolks with the sugar and the brandy.
Add hot milk and hot coee.
RECIPETIP: lightly whip the milk and add slowly at the very last
ingredient. Best served accompanied by a chocolate cake.
Danish coee
Ingredients:
6 eggs
grated rind of one lemon
100 g of sugar
3/4 l strong, cold coee
1 large glass of brandy
Method: Beat the eggs and the lemon rind, and then add the
sugar a little at a time until the eggs become light and airy.
Slowly add the coee and the brandy, stirring constantly. Serve
in chilled teacups or“Ballon”glasses.
Irish cofee
Ingredients (serves 3):
2 spoons of sugar
1 spoon of water
9 teaspoons of whipping cream
6 spoon of IrishWhisky
4 cups of hot coee
Method: Boil the water and the sugar for approximately one mi-
nute then add to the Whiskey and the hot coee. Mix and pour
into stem glasses. Carefully pour the cream onto the coee (3
teaspoons per glass).
RECIPE TIP: lightly whip the cream so that it stays on top of the
coee. Grand Marnier or Calvados can also be added.
Coee sorbet
Ingredients (serves 4):
200 g of granulated sugar
2 dl of espresso coee
Method: Combine ½ l of water and the sugar to make a syrup
and simmer for a few minutes; allow it to cool then mix in the
coee. Filter as soon as a smooth mixture is obtained then place
in the freezer to set, mixing often until of a grainy consistency.
Iced coee
Ingredients:
4 espresso coees
4 teaspoons of sugar
12 ice cubes
Method: Crush the ice and add to the pre-sugared coee.
Shake in a shaker until a frothy, creamy mixture
is obtained.
RECIPETIPS: blend on a low blender setting and
serve in a ute or glass tumbler.

2 3
C
C7
C6
C5
C4
C1 C3
C2
A9
This manual suits for next models
2
Table of contents
Other Smeg Coffee Maker manuals