Smeg KLF03PGUK User manual

Contents
3
ITENEN
1 Instructions 4
1.1 Introduction 4
1.2 This user manual 4
1.3 Intended use 4
1.4 General safety instructions 5
1.5 Manufacturer liability 7
1.6 Identification plate 7
1.7 Disposal 7
2 Description 8
2.1 Product description 8
2.2 Description of parts 9
3 Use 11
3.1 Before first use 11
3.2 Operation 12
4 Cleaning and maintenance 14
4.1 Instructions 14
4.2 Cleaning the surfaces 14
4.3 Ordinary daily cleaning 14
4.4 Cleaning the filter 15
4.5 Descaling 16
4.6 What to do if... 17
We advise you to read this manual carefully, as it contains all the instructions for maintaining the appliance’s aesthetic
and functional qualities.
For further information on the product: www.smeg.com
The manufacturer reserves the right to make any changes deemed useful for improvement of its products without prior
notice. The illustrations and descriptions contained in this manual are therefore not binding and are merely indicative.

Instructions
4
1 Instructions
1.1 Introduction
Key information for the user:
1.2 This user manual
This user manual is an integral part of the
appliance and must therefore be kept in its
entirety and within the user’s reach for the
whole working life of the appliance.
1.3 Intended use
• Use the appliance only indoors.
• The appliance has been designed
specifically for domestic use. It must only
be used to heat water. Do not use the
appliance for anything other than its
intended use.
• The appliance is not designed to operate
with external timers or with remote-
control systems.
• This appliance may not be used by
people of reduced physical, sensory or
mental capacity, or without sufficient
experience and knowledge (including
children), unless they are supervised or
instructed by adults who are responsible
for their safety.
• Children must never play with the
appliance. Keep the appliance out of
children’s reach.
Instructions
General information on this user
manual, on safety and final
disposal.
Description
Appliance description.
Use
Information on using your appliance
Cleaning and maintenance
Information for proper cleaning and
maintenance of the appliance.
Safety instructions
Information
Advice

Instructions
5
ITENEN
1.4 General safety instructions
Follow all safety instructions in order to use
the appliance safely.
• Read this user manual carefully before
using the appliance.
• Do not immerse the appliance, the
power cord, the plug or the base in
water or any other liquid.
• Never wash the appliance in the
dishwasher.
• Do not use the appliance when the
power cord or the plug is damaged or
when the appliance has been dropped
or is damaged in any manner.
• Do not position the power cord on sharp
edges or leave it trailing.
• Protect the power cord from heat and oil.
• Do not position the appliance above hot
surfaces, hob burners, or inside a hot
oven.
• Do not position the appliance on
surfaces sensitive to water. Drips could
damage it.
• Do not unplug the appliance with wet
hands, or by pulling on the power cord.
• In the event of a fault with the appliance,
repairs must be performed only by
qualified technicians or an authorised
technical support service.
• Never try to put out a fire or flames with
water: turn off the appliance and remove
the plug from the socket, and smother the
flames with a fire blanket or other
appropriate cover.
• Do not modify this appliance.
• Do not try to repair the appliance
yourself or without the assistance of a
qualified technician.
• If the power supply cable is damaged,
contact technical support immediately.

Instructions
6
For this appliance
• The kettle can get very hot during
operation. Do not touch the hot surfaces.
Use the handle.
• The heating element surface is subject to
residual heat after use. Be careful.
• Do not use the kettle if the handle is
loose.
• Do not operate the kettle on an inclined
plane.
• Do not operate the kettle unless the
element is fully immersed.
• Do not move while the kettle is switched
on.
• Unplug the kettle when it is not being
used, before cleaning and if you notice
any fault. Let the appliance cool down
before cleaning.
• Always use the kettle with the scale filter
fitted.
• Do not overfill the kettle (max. 1.7 litres),
otherwise boiling water may spray out.
• Only use the kettle to boil water. Never
fill the kettle with other liquids.
• Do not open the kettle's lid while it is on.
• Check that the lid is correctly closed
before turning on the kettle.
• Only use the kettle with the base
provided.
• Do not use the kettle on bases from other
manufacturers.
• Only use original spare parts. The use of
spare parts not approved by the
manufacturer could lead to fires, electric
shocks or personal injury.
• Only place the base on level surfaces.
• Do not use metal implements or scouring
pads to clean the inside of the kettle.
Only use products specifically designed
for the purpose.
• To prevent damage to the appliance do
not use alkaline cleaning agents when
cleaning, use a soft cloth and a mild
detergent.
• Empty the kettle before you use it each
time: if residual water is left inside, this
could lead to scale building up.
• This appliance can be used by children
aged from 8 years and above if they
have been given supervision or
instruction concerning use of the
appliance in a safe way and if they
understand the hazards involved.
• Cleaning and maintenance must never
be performed by children unless they are
older than 8 and supervised.
• Keep the kettle and its power cord out of
the reach of children aged less than 8
years.
• Do not allow children to play with the
appliance.
• This appliance is intended for use in a
home environment. Every other use is
considered improper. It also can be used
in:
• Staff kitchen areas in shops, offices
and other working environments
• Farm houses
• By guests in hotels, motels and other
residential type environments
• Bed and breakfast type environments.

Instructions
7
ITENEN
1.5 Manufacturer liability
The manufacturer shall not be liable for
damage to persons or property caused by:
• Use of the appliance other than as
envisaged
• Not having read the user manual
• Tampering with any part of the
appliance
• Use of non-original spare parts
• Failure to observe the safety instructions
1.6 Identification plate
The identification plate bears the technical
data, serial number and brand name of the
appliance. Do not remove the identification
plate for any reason.
1.7 Disposal
This appliance must be disposed of
separately from other waste
(Directive 2012/19/EU). The
appliance does not contain substances in
quantities sufficient to be considered
hazardous to health and the environment, in
accordance with current European
directives.
• Old appliances do not belong in
household waste! To comply with
current legislation, old appliances, on
reaching the end of their useful lives,
should be taken to a disposal facility
where they can be sorted. In this way,
any valuable material contained in the
old appliances can be recycled, helping
to protect the environment. The relevant
local authorities or their waste disposal
operators can provide further
information.
Our appliances are packed in non-
polluting and recyclable materials.
• Take these packing materials to the
appropriate recycling centre.
Electrical voltage
Danger of electrocution
• Disconnect the main power supply.
• Disconnect the power cable from the
electrical system.
• Avoid spillage on the connector and
power base.
Plastic packaging
Danger of suffocation
• Do not leave the packaging or any part
of it unattended.
• Do not let children play with the plastic
bags.

Description
8
2 Description
2.1 Product description
Model KLF03 - Kettle
1 Anti-drip spout
2 Scale filter
3 Lid with push-push opening
4 Handle
5 Water level indicator
6 ON/OFF lever with indicator light
7 Cordless base with 360° operation
8 Cable compartment (under base)
8
3
4
5
6
7

Description
9
ITENEN
2.2 Description of parts
Anti-drip spout (1)
The large stainless-steel spout allows water
to be poured easily and without spillage.
Scale filter (2)
The stainless-steel filter is located behind the
spout. It retains any scale present in the
water.
Lid with push-push opening (3)
The lid has a push-push button (3) which
allows it to open progressively to prevent
the sudden release of steam.
Water level indicator (5)
This indicator shows the level of water in the
kettle, from the minimum fill level of 0.5 litres
to the maximum of 1.7 litres, also showing
the corresponding quantity in cups.
1
2
3
5

Description
10
ON/OFF lever with indicator light (6)
The ON/OFF lever starts or stops the
boiling process. When the kettle is on, the
LED Aturns on and becomes white.
Cordless base with 360° operation (7)
The base’s 360° operation allows the
kettle to be used in any position.
To avoid damaging the appliance,
the kettle is equipped with a safety
device which turns the lever to the
OFF position automatically if the
kettle is accidentally switched on
without water.
If this occurs, let the kettle cool
down before starting the boiling
cycle again.
A
6
7

Use
11
ITENEN
3 Use
3.1 Before first use
1. Remove all stickers and labels from the
kettle and clean the outside with a damp
cloth.
2. Remove the scale filter behind the spout
and wash it under running water.
3. Replace the filter in the correct position.
4. Remove the kettle from its base, press the
button to open the lid and fill it to the
maximum level.
5. Close the lid again, place the kettle
down on its base and push the ON/
OFF lever down to turn it on.
6. Wait for the water to boil, then empty the
kettle, disposing of the boiling water
safely. Repeat this operation at least
three times.
Danger of electrocution
• Plug into a earthed 3-prong outlet.
• Do not remove the earth prong.
• Do not use an adapter.
• Do not use an extension cord.
• Failure to follow these instructions could
result in death, fire, or electrical shock.
• Avoid spillage on the power cord.
Hot surfaces
• Surfaces are liable to get hot.
Tips and suggestions for the user
• Do not use the kettle to heat anything
other than water – this would risk
causing severe damage to the
appliance.
• Only boil the quantity of water
required so as not to waste water,
electricity and your time.
• Always boil cold water to improve
the quality of your hot drinks.
To increase the appliance's lifetime:
• Empty any remaining water from
the kettle after each use.
• Regularly remove any scale from
inside the kettle.
Any slight marks or rings inside the
kettle are normal and due to
functional inspections which are
performed on each unit before
packaging.

Use
12
3.2 Operation
1. If necessary, shorten the length of the
power cable by winding it under the
base.
2. Hold the kettle by its handle when
removing it from the base.
3. Press the button (1) to open the lid.
1

Use
13
ITENEN
4. Fill the kettle with the required quantity of
water, referring to the marks on the level
indicator (2).
5. Close the lid again and place the kettle
back on its base.
6. Insert the plug into the power socket.
7. Push the lever (3) downwards to turn the
kettle on. The LED (4) will turn on and
become white.
8. When the water boils, the lever will
automatically click into the up (OFF)
position and the LED will turn off.
9. Pick up the kettle by the handle and pour
the boiling water into the desired
recipient (cups, teapot etc.).
2
Danger of burns
• Wait a few seconds from when the
kettle boils, then pour the water out
slowly to prevent it spraying or coming
out too fast.
• Do not fill the kettle beyond the
maximum level (1.7 litres) – risk of burns
when pouring.
• Do not tilt the hot kettle excessively – the
boiling water could spray out, with a risk
of burns.
• Keep your face a safe distance from the
lid to avoid the risk of burns from
escaping steam.
4
3

Cleaning and maintenance
14
4 Cleaning and maintenance
4.1 Instructions
4.2 Cleaning the surfaces
To keep the kettle’s outside surfaces in
good condition, they should be cleaned
regularly after use. Let them cool first.
4.3 Ordinary daily cleaning
Always use only products which do not
contain abrasive substances or chlorine-
based acids.
Pour the product onto a damp cloth and
wipe the surface, wipe clean thoroughly
and then dry with a soft cloth or a microfibre
cloth.
For cleaning the filter, see the section ”4.4
Cleaning the filter”.
Improper use
Danger of electrocution
• Unplug the kettle before cleaning it.
Hot appliance
Danger of burns
• Let the appliance cool down before
cleaning.
Improper use
Risk of damage to surfaces
• Do not use steam jets to clean the
appliance.
• Do not use cleaning products containing
chlorine, ammonia or bleach.
• Do not use abrasive or corrosive
detergents (e.g. powder products, stain
removers and metallic scourers).
• Do not use rough or abrasive materials
or sharp metal scrapers.
Tips and suggestions for the user
Clean the outside surfaces of the kettle
and perform the cleaning operations
indicated in section ”3.1 Before first
use” from point 2 to point 6 if the kettle
is left unused for a long time.

Cleaning and maintenance
15
ITENEN
4.4 Cleaning the filter
1. Open the lid and extract the filter.
2. Wash the filter under running water with
the aid of a soft brush.
3. Put the filter back in position behind the
spout.
Important
When washing the filter, make sure
your hands are clean and free of any
residue from soap, creams or other
products which could contaminate the
water.

Cleaning and maintenance
16
4.5 Descaling
Regularly removing any deposits of scale
inside the kettle will prolong your kettle's life,
ensuring maximum performance and
energy savings.
The kettle can be descaled using specific
descaling products.
Leave the descaling product to act, then
rinse thoroughly. Then boil at least two full
kettles of water, disposing of the boiling
water safely, to remove any residue of the
product before use.
Alternatively, you can use common
household vinegar.
Proceed as follows:
1. Fill the kettle with water (1 litre) and boil it.
2. Add the white vinegar (from 0.1 to 0.5 l
depending on the amount of scale).
3. Leave it to act overnight.
4. Empty the kettle.
5. Fill the kettle with water and boil it. Empty
the kettle, disposing of the water safely.
Repeat this operation at least twice.
Improper use
Risk of damage to the appliance
• Do not use descaling products for
cleaning bathrooms or kitchens, or
scented products.
Tips and suggestions for the user
• Scale build-up can cause the kettle to
switch off during use before the water
has boiled. Boiling times could also be
increased.
• If the kettle is used daily, or if it becomes
more difficult to pour out the water,
descale the kettle and filter more
frequently.
• In some regions the water is harder, and
in these areas it could have a cloudy
appearance and leave residue on the
walls of the kettle. In this case, clean the
inside of the kettle more frequently or
use purified/softened water.

Cleaning and maintenance
17
ITENEN
4.6 What to do if...
Problem Cause Solution
Pouring water becomes more
difficult Scale build-up on filter Check that the filter is clean
and correctly positioned
The kettle turns off before
boiling
The base of the kettle has
excessive scale build-up Descale more frequently
Too little water has been
added to the kettle
Increase the quantity of
water until you reach at least
the minimum level
The appliance does not turn
on
The safety device has
tripped out due to the kettle
being operated without
water
Let the kettle cool down
before attempting to boil
water again
The plug is not properly
inserted in the power socket
Insert the plug into the power
socket. Do not use adaptors
or extensions.
Check that the house's main
breaker is on
The cable is defective Have the cable replaced at an Authorised Service
Centre
Lack of power Check that the house's main
breaker is on