Smooth Fitness 1CD User manual

OWNER’S MANUAL
RETAIN FOR FUTURE REFERENCE
TOLL FREE CUSTOMER SERVICE
1.888.800.1167
MODEL NUMBER: EVO 1CD
SERIAL NUMBER:
USER’S WEIGHT LIMITATION 350lbs.
APPLICATION STANDARD
ASSEMBLY
OPERATING INSTRUCTIONS
CONDITIONING GUIDELINES
MAINTENANCE
SERVICE
EVO 1CD Motorized Treadmill
Optional Equipment:Standard Equipment:

precautions
-2-
BEFORE BEGINNING
Use the treadmill only as
described in this manual.
Place on a level surface, with 6
feet (2 m) of clearance behind it. Do
not place the treadmill on any surface
that blocks air openings. To protect
the floor or carpet from damage, place
a mat under the treadmill.
When choosing a location for the
treadmill make sure that the location
and position permit access to a plug.
Keep the treadmill indoors, away
from moisture and dust. Do not put
the treadmill in a garage or covered
patio, or near water.
Do not operate the treadmill where
aerosol products are used or where
oxygen is being administered.
Keep children under the age of
12 and pets away from the treadmill
at all times.
The treadmill should not be used
by persons weighing more than
350lbs.
Never allow more than one person
on the treadmill at a time.
Wear appropriate exercise clothing
when using the treadmill. Do not wear
loose clothing that could become
caught in the treadmill.Athletic support
clothes are recommended for both
men and women. Always wear
athletic shoes. Never use the treadmill
with bare feet, wearing only stockings,
or in sandals.
For future service or related
questions.
Please staple your receipt and/or
write in the name and phone number
of the retail store where you
purchased your EVO treadmill.
Name:
Phone Number:
Receipt:
Precautions
WARNING: To reduce the risk of
burns, fire, electric shock, or injury
to persons, read the following
important precautions and
information before operating the
treadmill.
It is the responsibility of the owner
to ensure that all users of this
treadmill are adequately informed of
all warnings and precautions.
When connecting the power
cord, plug the power cord into
a grounded circuit. No other
appliance should be on the same
circuit.
Always straddle the belt and allow
it to start moving before stepping
onto the belt.
Always examine your treadmill
before using to ensure all parts are
in working order.
Allow the belt to fully stop before
dismounting.
Never insert any object or body
parts into any opening.
Follow the safety information in
regards to plugging in your treadmill.
Keep the power cord away from
the incline wheels and do not run
the power cord underneath your
treadmill. Do not operate the
treadmill with a damaged or frayed
power cord.
Always unplug the treadmill before
cleaning and/or servicing. Service
to your treadmill should only be
performed by an authorized service
representative, unless authorized
and/or instructed by the
manufacturer. Failure to follow these
instructions will void the treadmill
warranty.
Never leave the treadmill
unattended while it is running.

power requirements
POWER REQUIREMENTS
conductor and a grounding plug.
Always plug the power cord into a
surge protector, and plug the surge
protector into an appropriate outlet
that is properly installed and
grounded in accordance with all local
codes and ordinances.
This product is for use on a nominal
120-volt circuit, and has a grounding
plug that looks like the plug illustrated
in the drawing below.
Power Requirements:
IMPROPER CONNECTION OF
THE EQUIPMENT GROUNDING
CONNECTOR CAN RESULT IN A
RISK OF AN ELECTRIC SHOCK.
CHECK WITH A QUALIFIED
ELECTRICIAN OR SERVICE MAN
IF YOU ARE IN DOUBT AS TO
WHETHER THE PRODUCT IS
PROPERLY GROUNDED. DO NOT
MODIFY THE PLUG PROVIDED
WITH THE PRODUCT, IF IT WILL
NOT FIT THE OUTLET, HAVE A
PROPER OUTLET INSTALLED BY
A QUALIFIED ELECTRICIAN.
This treadmill can be seriously
damaged by sudden voltage
changes in your home’s electrical
power. Voltage spikes, surges and
noise interference can result from
weather conditions or from other
appliances being turned on or off.
To reduce the possibility of treadmill
damage, always use a surge
protector (not included) with your
treadmill.
Surge protectors can be purchased
at most hardware stores. The
manufacturer recommends a single
outlet surge protector with a UL1449
rating as a Transient Voltage Surge
Suppressor (TVSS) with a UL
suppressed voltage rating of 400V
or less and an electrical rating
120VAC,15 amps.
This treadmill must be grounded to
reduce the risk of electrical shock.
Grounding provides a path of least
resistance for electric current, should
the treadmill malfunction. This
treadmill comes with an electrical
cord having an equipment-grounding -3-
SURGE PROTECTOR
GROUNDING PLUG
SURGE PROTECTOR
GROUNDING PIN
GROUNDING OUTLET
TREADMILL POWER CORD
ADAPTOR
SCREW
GROUNDING OUTLET
SURGE PROTECTOR
GROUNDING PLUG

preassembly
-4-
BEFORE BEGINNING
Invite a friend
Some of the assembly steps may
require heavy lifting. It is
recommended that you obtain the
assistance of another person when
assembling this product.
User Weight Limitation
Please note that there is a weight
limitation for this product. If you
weigh more than 350lbs. it is not
recommended that you use this
product. Serious injury may occur
if the user’s weight exceeds the
limit shown here. This product is
not intended to support users whose
weight exceeds this limit.
Open the boxes
You are now ready to open the boxes
of your new equipment. Make sure
to inventory all of the parts that are
included in the boxes. Check the
Hardware Comparison Chart for a
full count of the number of parts
included for this product to be
assembled properly. If you are
missing any parts or have any
assembly questions call your local
Smooth Retailer.
Gather your tools
Before starting the assembly of
your unit, make sure that you have
gathered all the necessary tools you
may require to assemble the unit
properly. Having all of the necessary
equipment at hand will save time
and make the assembly quick and
hassle-free.
Clear your work area
Make sure that you have cleared
away a large enough space to
properly assemble the unit. Make
sure space is free from anything that
may cause injury during assembly.
After the unit is fully assembled,
make sure there is a comfortable
amount of free area around the unit
for unobstructed operation.

-5-
COMPARISON CHART
For your convenience, we have
identified the hardware used in
the assembly of this product.
This chart is provided to help you
identify those items that may be
unfamiliar to you.
MILLIMETERS
10 20 30 40 50 60 70 80 90 1000
hardware
8
Screw
M4 x 19mm
(4 pieces)
55
Screw
#8 x 19mm
(4 pieces)
16
Screw
M6 x 20mm
(2 pieces)
17
Screw
M8 x 15mm
(4 pieces)
121
Screw
M8 x 19mm
(4 pieces)
40
Metal Cap
(2 pieces)
Allen Wrench
(1 piece)
Wrench
(1 piece)
Wrench
(1 piece)
Wrench
(1 piece)
130
Screw
M6 x 15mm
(2 pieces)
46
Bolt
M8 x 78mm
(2 pieces)
4
Safety Key
(1 piece)

Step 1:
Remove your EVO 1CD Treadmill from
the carton and place it on the floor in an
open area as shown in FIG-1.
Raise the Right and Left Handle Uprights
(6 and 7) to the upright position and
secure with Screws (17).
assembly instructions
-6-
ASSEMBLY
FIG-1

assembly instructions
-7-
Step 2:
Remove the Screw (51) then rotate the
Computer Support (3) up to the correct
position as shown and secure with the
Screw (51).
ASSEMBLY

Step 3:
Rotate the Console (39) up to its proper
angle and secure with Screws (16) as
shown in FIG-2.
ASSEMBLY
assembly instructions
-8-
FIG-2

Step 4:
NOTE:
If you have the Optional Smooth Music Package
follow these instructions before attaching the
Console Tray (137).
Run the Cd Player Wires from the back of the
Console (39) first through the small hole on the
Console Tray (137), then through the tabs on the
back of the Console Tray (137) and finally through
the small hole on the side of the Console (39)
as shown.
Attach ConsoleTray Bracket (134) to the Console
Tray (137) and secure with Screws (135).
Attach the ConsoleTray (137). Insert the Console
Tray Bracket (134) into the Console (39) and
secure with the Screw (133).
NOTE: For proper use please make sure to
insert the plastic flange UNDER the metal tab
before inserting the screw.
assembly instructions
-9-
ASSEMBLY
CD PLAYER
WIRES
Plastic Flange

Step 5:
Attach the Cross Tube (45) to the Left and
Right Handle Uprights (6 and 7) and secure
with the Metal Cap (40) and Bolts (46).
Secure the Computer Support (3) to the
Right and Left Handle Uprights (6 and 7)
by tightening the Screws (18).
ASSEMBLY
assembly instructions
-10-

Step 6:
Unscrew Bolt (132). Insert the Console
Tray Support Tube (138) into the Cross
Tube (45) and secure with Bolt (132).
Do not fully tighten until later.
assembly instructions
-11-
ASSEMBLY

assembly instructions
-12-
Step 7:
Rotate the Console Tray Support Tube
(138) and slide it into the hole
underneath the Console Tray (137).
ASSEMBLY

Step 8:
Fully tighten Screws (18) and (51) and
Bolts (46) and (132) at this time.
assembly instructions
-13-
ASSEMBLY

assembly instructions
-14-
Step 9:
Connect the Motion Control Sensor and Hand
Pulse Sensor wires then attach the Right and
Left Handlebars (30 and 12) to the Right and
Left Handle Uprights (6 and 7) and secure
using Screws (121).
ASSEMBLY
Connect the sensor wires
Connect the
sensor wires
Connect the
sensor wires

Step 10:
Mount the Handle Cover Right - 1 (42) and the
Handle Cover Right - 2 (44) to the Right Handle
Upright (6) and secure with Screws (55) and (8).
Mount the Handle Cover Left - 1 (43) and the
Handle Cover Left - 2 (41) to the Left Handle
Upright (7) and secure with Screws (55) and (8).
ASSEMBLY
assembly instructions
-15-

Step 11:
Attach the Base Frame End Caps (14) to
the Left and Right Handle Upright (6 and 7)
and secure using the Screws (130).
ASSEMBLY
assembly instructions
-16-

-17-
assembly instructions
Connecting the Speakers and CD Player:
When connecting the Speakers to the
Console first plug the Speaker Wires into
the sides of the Console. Then insert the
Speakers into the sides of the Console and
secure with Knobs.
Plug the two wires from the Console Tray
into the CD Player then place it on the Tray
as shown in FIG 3.
NOTE: There are three plugs located on
the left side of the CD player. The rear plug
is the AC power. The middle plug (Line
Out) is not used at all. Leave that one open.
The front plug is called Headphones Out
and is used for the speakers (or headphones
if you like).
Warning: On the right side of the CD Player
there is a button called “Hold”. This button
should ALWAYS be set to OFF. If it is on,
the unit will not play.
OPTIONAL EQUIPMENT ASSEMBLY
FIG-3
CD Player
Console Tray
Speaker
Speaker
Console
Knob
Knob
AC Power Line Out (not used)
CD Player, left side Headphones Out
CD Player, right side

-18-
folding instructions
Your treadmill can be folded up for space
saving storage. To do this first be sure
that the deck is at the lowest incline
level. Simply lift the deck up from the
rear of the treadmill and fold up until it
locks in place. TO PREVENT INJURY
BE SURE YOU HAVE A FIRM HOLD
WHEN RAISING THE DECK. You will
hear a “click” sound as the lock engages.
FOLD UP FOR STORAGE
2. Raise the deck up until
the lock engages.
1. Stand behind the treadmill
and lift the deck up.
CLICK

-19-
roll away instructions
How to roll away the EVO 1CD Treadmill:
After folding the treadmill tilt it to one side (you
may need the help of a friend), reach under
the Base Frame (1) and pull down the Caster
Bracket (49). Repeat this procedure on the
other side. Then to roll away for storage simply
grab the handlebars and push as shown below.
NOTE: After moving the treadmill to the
desired location, make sure to put the Caster
Brackets (49) back into their upright position
in order to stabilize the treadmill for use.
ROLL AWAY FOR STORAGE
Put up to stabilize for use.
Pull down to roll away.

-20-
To unfold the treadmill for use begin by
standing behind and supporting the deck
with your hands. Next release the lock
with your foot by stepping on the release
lever. TO PREVENT INJURY BE SURE
YOU HAVE A FIRM HOLD ON THE
DECK BEFORE RELEASING THE
LOCK. Slowly lower the deck until it
rests securely on the ground.
UNFOLD FOR USE
unfolding instructions
2. Slowly lower the deck until it
rests securely on the ground.
1. Support the deck and release
the lock with your foot.
Release Lever