Smooth Fitness 6.17 MOTORIZED TREADMILL User manual

USER’S MANUAL
6.17 MOTORIZED TREADMILL
USER WEIGHT LIMITATION: 350LBS (150KGS)
SERIAL NUMBER (Found on Frame):

6.17MOTORIZDTREADMILL
2

WWW.SMOOTHFITNESS.COM
PRECAUTIONS
For Future Service or Related Questions:
Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your
treadmill.
Name: ______________________________ Phone Number: ___________________ Receipt: ______________________
WARNING:
To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and
information before operating the treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are
adequately informed of all warnings and precautions.
•Use the treadmill only as described in this manual.
•Place on a level surface, with 6 feet (2 m) of clearance behind it. Do not place the treadmill on any surface that
blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.
•When choosing a location for the treadmill makes sure that the location and position permit access to a plug.
•Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio,
or near water.
•Do not operate the treadmill where aerosol products are used or where oxygen is being administered.
•Keep children under the age of 12 and pets away from the treadmill at all times.
•The treadmill should not be used by persons weighing more than 350 LBS (150 kgs)
•Never allow more than one person on the treadmill at a time. Wear appropriate exercise clothing when using
the treadmill. Do not wear loose clothing that could become caught in the treadmill. Athletic support clothes are
recommended for both men and women. Always wear athletic shoes. Never use the treadmill with bare feet,
wearing only stockings, or in sandals.
•When connecting the power cord, plug the power cord into a grounded circuit. No other appliance should be
on the same circuit.
•Always straddle the belt and allow it to start moving before stepping onto the belt.
•Always examine your treadmill before using to ensure all parts are in working order.
•Allow the belt to fully stop before dismounting.
•Never insert any object or body parts into any opening.
•Follow the safety information in regards to plugging in your treadmill.
•Keep the power cord away from the incline wheels and do not run the power cord underneath your treadmill.
Do not operate the treadmill with a damaged or frayed power cord.
•Always unplug the treadmill before cleaning and/or servicing. Service to your treadmill should only be
performed by an authorized service representative, unless authorized and/or instructed by the manufacturer.
Failure to follow these instructions will void the treadmill warranty.
•Never leave the treadmill unattended while it is running.
•The equipment is for Class B (Home Use).

3 6.17MOTORIZDTREADMILL

POWER REQUIREMENT
POWER REQUIREMENT
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN
ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS
TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE
PRODUCT, IF IT WILL NOT FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED
ELECTRICIAN.
This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes,
surges and noise interference can result from weather conditions or from other appliances being turned on or off. To
reduce the possibility of treadmill damage, always use a surge protector (not included) with your treadmill.
This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance
for electric current, should the treadmill malfunction. This treadmill comes with an electrical cord having an
equipment-grounding conductor and a grounding plug. Always plug the power cord into a surge protector, and plug
the surge protector into an appropriate outlet that is properly installed and grounded in accordance with all local
codes and ordinances.
This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like the plug illustrated in the
drawing below.
WWW.SMOOTHFITNESS.COM

6.17MOTORIZDTREADMILL
4

PREASSEMBLY
Open The Boxes:
You are now ready to open the boxes of your new equipment.
Make sure to inventory all of the parts that are included in the boxes.
Check the Hardware Comparison Chart for a full count of the number of parts included for this product to be assembled
properly. If you are missing any parts or have any assembly questions call your local Smooth Retailer.
Gather Your Tools:
Before starting the assembly of your unit, make sure that you have gathered all the necessary tools you may require to
assemble the unit properly. Having all of the necessary equipment at hand will save time and make the assembly quick and
hassle-free.
Clear Your Work Area:
Make sure that you have cleared away a large enough space to properly assemble the unit.
Make sure the space is free from anything that may cause injury during assembly.
After the unit is fully assembled, make sure there is a comfortable amount of free area around the unit for unobstructed
operation.
Invite a Friend:
Some of the assembly steps may require heavy lifting.
It is recommended that you obtain the assistance of another person when assembling this product.
User Weight Limitation:
Please note that there is a weight limitation for this product.
If you weigh more than 350LB (Approx. 150 Kg). It is not recommended that you use this product.
Serious injury may occur if the user’s weight exceeds the limit shown here. This product is not intended to
support users whose weight exceeds this limit.
Care and Maintenance :
1. The safety level can be maintained only if it is examined for damage and wear.
2. Replace the defect components immediately and do not use the equipment until it is repaired.
3. Always mount the equipment and straddle the running belt before you start the treadmill. Dismount from the
treadmill only after the running belt has stopped.
4. Always check for worn components like pulleys, belts etc.
5. Emergency Stop: You can stop the treadmill immediately by removing the safety key.
WWW.SMOOTHFITNESS.COM

5 6.17MOTORIZDTREADMILL

HARDWARE COMPARISON CHART
Hardware Chart:
For your convenience, we have identified the hardware used in the assembly of this product.
This chart is provided to help you identify those items that may be unfamiliar to you.
No. Description Qty.
310 Screw Cover 2
802 Φ8 Washer 10
804 M8x45mm Allen Head Cap Bolt 4
805 M8x51mm Allen Head Cap Bolt 2
806 Φ4x14mm Screw 4
830 M8x18mm Allen Head Cap Bolt 4
304 Hand bar Cover - LL 1
305 Hand bar Cover - LR 1
307 Hand bar Cover - RL 1
308 Hand bar Cover - RR 1
604 Upright Base Cover-L-Back 1
607 Upright Base Cover-R-Back 1
104 Safety Key 1
A 6mm Allen key 1
B 6mm Allen key 1
C Screw Driver 1
D Oil Can 1
E Power Cord 1
F 5mm Allen Wrench 1
WWW.SMOOTHFITNESS.COM
1 x
BA C
5mm 6mm
1 x 1 x
1 x 1 x 1 x
1 x 1 x
D
8mm
10 x
2 x
M8x51mm
M8x45mm
4 x
M8x18mm
4 x
4 x
4 x14mm
F
5mm
1 x
E104
1 x
MILLIMETERS

6.17MOTORIZDTREADMILL
6

PARTS LIST
Part No. Description Qty. Order No.
100
101 Computer Button Cover 1 6.17- 101
102 Console Housing -Upper 1 6.17- 102
103 Computer 1 6.17- 103
104 Safety Key 1 6.17- 104
105 Safety Key Base 1 6.17- 105
106 Button Board 1 6.17- 106
107 Console Housing-Bottom 1 6.17- 107
108 Overlay 1 6.17- 108
200
201 Console Fixed Tube -Left 1 6.17- 201
202 Handbar Foam -Small 2 6.17- 202
203 Console Fixed Tube -Right 1 6.17- 203
206 Handpulse Sensor -Upper 2 6.17- 206
207 Handpulse Sensor -Bottom 2 6.17- 207
208 Handbar Foam -Big 2 6.17- 208
209 Handpulse Tube 1 6.17- 209
300
301 Upright- Left 1 6.17- 301
302 7 Pin Computer Wire 1 6.17- 302
303 2 Pin Safety Key Wire 1 6.17- 303
304 Handbar Cover -LL 1 6.17- 304
305 Handbar Cover -LR 1 6.17- 305
306 Upright Connect Frame-Left 1 6.17- 306
307 Handbar Cover -RL 1 6.17- 307
308 Handbar Cover -RR 1 6.17- 308
309 Upright Connect Frame-Right 1 6.17- 309
310 Screw Cover 2 6.17- 310
311 Upright-Right 1 6.17- 311
400
401 Main Frame 1 6.17- 401
402 Front Roller 1 6.17- 402
403 Front Roller Shaft 1 6.17- 403
404 Elevation Control Board 1 6.17- 404
405 Rear Roller 1 6.17- 405
406 Control Board 1 6.17- 406
407 Rear Roller-Shaft 1 6.17- 407
408 Elevation Motor 1 6.17- 408
409 Elevation Motor Gear Sleeve 1 6.17- 409
410 Running Deck Cross Brace 1 6.17- 410
411 Running Deck Cross Brace Foam 1 6.17- 411
412 Wheel Cushion 2 6.17- 412
413 Elevation Control Board Fixing Insert 6 6.17- 413
414 Conversion Cable 1 6.17- 414
WWW.SMOOTHFITNESS.COM

7 6.17MOTORIZDTREADMILL

PARTS LIST
Part No. Description Qty. Order No.
500
501 Motor Hood -Upper 1 6.17- 501
502 Motor Hood Decorative Cover- Left 1 6.17- 502
503 Motor Hood Decorative Cover- Right 1 6.17- 503
504 Motor Hood-Bottom 1 6.17- 504
505 Driving Motor 1 6.17- 505
506 Driving Motor Base 1 6.17- 506
507 Transportation Wheel-Front 2 6.17- 507
508 Driving Belt 1 6.17- 508
509 Plastic Clamp-Upper 2 6.17- 509
510 Plastic Clamp-Bottom 2 6.17- 510
511 Bracket 2 6.17- 511
512 Fold Up Support 1 6.17- 512
513 Shock 1 6.17- 513
514 Fold Up Support Wheel 1 6.17- 514
515 Fold Up Support Bush 2 6.17- 515
516 Elevation Support Frame 1 6.17- 516
600
601 Base Frame 1 6.17- 601
602 Upright Base Cover -L-L 1 6.17- 602
603 Upright Base Cover -L-R 1 6.17- 603
604 Upright Base Cover -L-Back 1 6.17- 604
605 Upright Base Cover -R-L 1 6.17- 605
606 Upright Base Cover -R-L 1 6.17- 606
607 Upright Base Cover -L-Back 1 6.17- 607
608 Power Switch Plate Base 1 6.17- 608
609 Power Breaker 1 6.17- 609
610 Power Switch 1 6.17- 610
611 Power Switch Board 1 6.17- 611
612 Electric Outlet 1 6.17- 612
613 Rubber Cushion 4 6.17- 613
614 Fold Up Locker 1 6.17- 614
615 Spring 1 6.17- 615
616 Transportation Wheel Pedal 1 6.17- 616
617 Transportation Wheel Holder 1 6.17- 617
618 Transportation Wheel-Rear 1 6.17- 618
700
701 Running Belt 1 6.17- 701
702 Side Rail 2 6.17- 702
703 Side Rail Insert Bar 2 6.17- 703
704 Left Rear End Cap-Outside 1 6.17- 704
705 Left Rear End Cap-Inner 1 6.17- 705
706 Left Rear End Cap-Decorative Cover 1 6.17- 706
707 Right Rear End Cap-Outside 1 6.17- 707
708 Right Rear End Cap-Inner 1 6.17- 708
WWW.SMOOTHFITNESS.COM

6.17MOTORIZDTREADMILL
8

PARTS LIST
Part No. Description Qty. Order No.
709 Left Rear End Cap-Decorative Cover 1 6.17- 709
710 Running Deck 1 6.17- 710
711 Running Deck Rubber Cushion 8 6.17- 711
712 Side Rail Guider 8 6.17- 712
800
801 Φ2x6mm Screw 8 6.17- 801
802 Φ8 Washer 24 6.17- 802
803 Φ3.5x14mm Screw 27 6.17- 803
804 M 8x45mm Allen Head Cap Bolt 8 6.17- 804
805 M 8x51mm Allen Head Cap Bolt 4 6.17- 805
806 Φ4x14mm Screw 76 6.17- 806
807 M 8x10mm Allen Head Cap Bolt 2 6.17- 807
808 M 8x70mm Allen Head Cap Bolt 2 6.17- 808
809 M 6x45mm Allen Head Cap Bolt 3 6.17- 809
810 M 8x30mm Bolt 10 6.17- 810
811 Φ6 Washer 3 6.17- 811
812 M 10x38mm Allen Head Cap Bolt 2 6.17- 812
813 M10 Nut 5 6.17- 813
814 M 10x30mm Allen Head Cap Bolt 1 6.17- 814
815 M 4x12mm Bolt 4 6.17- 815
816 M 10x28mm Allen Head Cap Bolt 2 6.17- 816
817 M 8 Nut 6 6.17- 817
818 M 10x43mm Allen Head Cap Bolt 1 6.17- 818
819 Φ10 Washer 2 6.17- 819
820 M 8x47mm Bolt 1 6.17- 820
821 M 8x85mm Motor Adjustment Bolt 1 6.17- 821
822 Φ35x6mm Spring Washer 2 6.17- 822
823 Φ25x12mm PU Cushion 1 6.17- 823
824 M 8x12mm Allen Head Cap Screw 2 6.17- 824
825 M 10x116mm Allen Head Bolt 1 6.17- 825
826 M 10x66mm Allen Head Cap Screw 1 6.17- 826
827 M 8x30mm Allen Head Cap Bolt 4 6.17- 827
828 Snap Link 1 6.17- 828
829 Φ4x19mm Screw 16 6.17- 829
830 M 8x18mm Allen Head Cap Bolt 4 6.17- 830
831 M 16x139mm Bolt 2 6.17- 831
832 M 6 Nut 1 6.17- 832
833 M 8x52mm Allen Head Cap Bolt 1 6.17- 833
834 M 10x44mm Allen Head Cap Bolt 1 6.17- 834
835 M 8x38mm Allen Head Cap Bolt 1 6.17- 835
836 M 5x14mm Bolt 4 6.17- 836
837 Φ6 Plastic Insert 4 6.17- 837
838 Φ6.2 Plastic Insert 14 6.17- 838
839 Φ3x14 mm Screw 4 6.17- 839
840 Φ4x25 mm Screw 2 6.17- 840
841
Φ6﹢Washer 2 6.17- 841
WWW.SMOOTHFITNESS.COM

9 6.17MOTORIZDTREADMILL

PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED AT THE FACTORY.
WWW.SMOOTHFITNESS.COM

6.17MOTORIZDTREADMILL
10

PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED AT THE FACTORY.
WWW.SMOOTHFITNESS.COM

11 6.17MOTORIZDTREADMILL

PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED AT THE FACTORY.
WWW.SMOOTHFITNESS.COM

6.17MOTORIZDTREADMILL
12

PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED AT THE FACTORY.
WWW.SMOOTHFITNESS.COM

13 6.17MOTORIZDTREADMILL

PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED AT THE FACTORY.
WWW.SMOOTHFITNESS.COM

6.17MOTORIZDTREADMILL
14

PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED AT THE FACTORY.
WWW.SMOOTHFITNESS.COM

15 6.17MOTORIZDTREADMILL

PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED AT THE FACTORY.
WWW.SMOOTHFITNESS.COM

6.17MOTORIZDTREADMILL
16

ASSEMBLY
STEP 1:
A. Remove the carton and all packing material from the treadmill and
place the treadmill on the floor in an open area.
B. Raise up the Upright (301), and secure the Left Upright using two
M8x18mm Allen Head Cap Bolt (830), two Φ8 Washer (802), one
M8x51mm Bolt (805) and one Φ8 Washer (802).
C. Secure the Right Upright using two M8x18mm Allen Head Cap Bolt
(830), two Φ8 Washer (802), one M8x51mm Bolt (805) and one Φ8
Washer (802).
802
X 6
805 X 2
830
X 4
WWW.SMOOTHFITNESS.COM

17 6.17MOTORIZDTREADMILL

ASSEMBLY
STEP 2:
A. Rotate the Console Assembly (203) up and hold while the bolts are inserted.
B. Secure the Right Handbar with two M8x45mm Allen Head Cap Bolt (804)
and two Φ8 Washer (802).
C. Secure the Left Handbar with two M8x45mm Allen Head Cap Bolt (804) and
two Φ8 Washer (802) .
802 X 4
804 X 4
WWW.SMOOTHFITNESS.COM

6.17MOTORIZDTREADMILL
18

ASSEMBLY
STEP 3:
NOTE: Refer to FOLDING INSTRUCTION on the page 22.
A. Fold up the running deck until it locks in correct position.
B. Attach Right Upright base cover- back (604) to the right upright, secure
with one 4 x 14mm screw (806).
C. Attach Left Upright base cover- back to the left upright, secure with
one 4 x 14mm screw.
806
X
2
WWW.SMOOTHFITNESS.COM

19 6.17MOTORIZDTREADMILL

ASSEMBLY
STEP 4:
A. Attach the Handbar Cover-LL (304) then attach the Handbar Cover-LR
(305), secure with one 4 x 14mm screw.
B. Attach the Handbar Cover-RR (308) then attach the Handbar Cover-RL
(307), secure with one 4 x 14mm screw.
806 X 2
WWW.SMOOTHFITNESS.COM

6.17MOTORIZDTREADMILL
20

ASSEMBLY
STEP 5:
A. Loosen Handlebar securing bolts using the 6mm Allen key and push the Handlebar
down until the handlebar covers are fully seated in the uprights.
B. Tighten the Handlebar securing bolts.
C. Insert the Screw covers (310) to the uprights as shown the Close-up 3.
310
X 2
WWW.SMOOTHFITNESS.COM