Snuza PICO 2 User manual

Pico 2 Quick Start Guide
Snuza Connect App Setup:
1. Download the Snuza Connect app
2. Follow the prompts to register
3. Activate your account via the e-mail link
4. Once activated, add the Pico to your account
5. You can find the serial number on the side of the Pico 2 by lifting its top lever
1. Lift Pico 2’s top lever to release clip (fig.1)
2. Fold over the top edge of the diaper and place the Pico 2 on your baby’s
diaper sliding your fingers between the clip and your baby’s skin (fig.2)
3. Ensure that the clip is properly closed once placed and that no skin is
pinched in clip (fig.3)
Attach your Snuza Pico 2:
Snuza Pico 2 Device Setup:
Charge your Snuza Pico 2
1. Attach the micro USB power cord to the charging cradle base. A red light will
appear on the charging cradle base to indicate it has power.
2. Open the charging cradle lid and place your Pico 2 in the correct position
3. Close the lid
4. The battery light on the Pico 2 will flash while charging and turn solid green
when fully charged
SLIDE ON
PRESS DOWN
NAPPY
SKIN

Switch your Pico 2 on and start monitoring:
1. Switch the Pico 2 on by briefly pressing the power button
2. All indicator lights will flash and a start-up tone will be heard
3. Alternatively, switch the Pico 2 on by pressing the power button in the
app. The start-up tone will be silent if controlled via the app.
4. Only use monitor when baby is in a motionless bed/cot
Regulatory Information: FCC compliance statement for Pico and charging cradle. This
device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference (2) this device must accept
any interference received, including interference that may cause undesired operation.
This device meets the FCC requirements for RF exposure in public or uncontrolled
environments. Canadian regulatory statement for Pico and charging cradle. This
device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference (2) this
device must accept any interference, including interference that may cause undesired
operation of the device. CAN ICES-3 (B)/NMB-3(B). This device complies with the safety
requirements for RF exposure in accordance with RSS-102 Issue 5 for portable use
conditions. Disclaimer: Customers use this monitor at their own risk. Snuza International
(Pty) Ltd, its members, employees, agents, contractors, representatives, manufacturers,
distributors and associates (”SNUZA”) shall not be held liable for any loss, damage or
injury suffered by the customer or any other person arising from, or in connection with,
the use or manufacture of the monitor, including loss, damage or injury suffered by the
customer or any other person as a result of any defects in respect of the monitor, and all
warranties, and any other liability from whatsoever cause arising, are hereby excluded.
The customer hereby indemnifies Snuza International (Pty) Ltd in respect of any such
liability. Guarantee: Snuza International (Pty) Ltd guarantees this product to be free from
defects in materials and workmanship for a period of 12 months from the original date of
purchase, verified by a sales receipt.
For support contact us through [e-mail]
PP2Q0901
Scan the QR code to consult the full instruction manual