socomec NETYS RT User manual

SNMP/WEB Interface
UPS SNMP Card
Installation and operating manual GB
YOUR CONNECTION TO SAFETY
Thiele KG • Vorderer Weinberg 26 • D-71522 Backnang • Tel.: [phone] • Fax.: [phone] • [email protected] • www.thiele-kg.de
Thiele KG • Vorderer Weinberg 26 • D-71522 Backnang • Tel.: [phone] • Fax.: [phone] • [email protected] • www.thiele-kg.de
YOUR CONNECTION TO SAFETY
klick to
www
u-s-v
YOUR CONNECTION TO SAFETY
klick to
www
ACDC-DCDC
YOUR CONNECTION TO SAFETY
klick to
www
SYSTEME
YOUR CONNECTION TO SAFETY
klick to
www
CONTACT
YOUR CONNECTION TO SAFETY
klick to
www
CALLBACK

3
- Ref.: IOMNETRTXX02-GB 01
TABLE OF CONTENTS
ENGLISH
1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.1 Model Differences. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.2 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.3 System Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2. FIRST INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.1 First Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.2 Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3. CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.1 Configuring the SNMP/WEB Interface by EzSetting . . . . . . . . . . . . . . . . . . . . 8
3.2 Configuring the SNMP/WEB Interface throught COM Port . . . . . . . . . . . . . . . 9
3.3 Configuring the SNMP/WEB Interface throught Telnet . . . . . . . . . . . . . . . . . . 9
3.4 Text Mode Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.5 User Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.6 System Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.7 SNMPv1 Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.8 SNMP Trap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.9 Time Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.10 Wake On LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.11 Upgrade Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.12 Soft Restart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.13 Reset All To Default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.14 Exit Without Save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.15 Save And Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4. MANAGING SNMP/WEB INTERFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.1 Running the Web Browser Internet Explorer . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.2 UPS Shutdown Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.3 UPS Shutdown actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.4 Wake-on-Lan (WOL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.5 Email Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.6 SNMP Access Control Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.7 Updating UPS SNMP Device Firmware from Windows . . . . . . . . . . . . . . . . . 15
5. SPECIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.1 Technical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.2 PIN Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.3 DIP Switch Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.4 LED Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
YOUR CONNECTION TO SAFETY
Thiele KG • Vorderer Weinberg 26 • D-71522 Backnang • Tel.: [phone] • Fax.: [phone] • [email protected] • www.thiele-kg.de
Thiele KG • Vorderer Weinberg 26 • D-71522 Backnang • Tel.: [phone] • Fax.: [phone] • [email protected] • www.thiele-kg.de
YOUR CONNECTION TO SAFETY
klick to
www
u-s-v
YOUR CONNECTION TO SAFETY
klick to
www
ACDC-DCDC
YOUR CONNECTION TO SAFETY
klick to
www
SYSTEME
YOUR CONNECTION TO SAFETY
klick to
www
CONTACT
YOUR CONNECTION TO SAFETY
klick to
www
CALLBACK

4- Ref.: IOMNETRTXX02-GB 01
1. INTRODUCTION
1.1 Model Differences
There are 2 models for SNMP card: One is SNMP/WEB Interface SNMP card with golden finger connector, the other one is mini
SNMP card. Their outlines are as the following:
•SNMP/WEB Interface SNMP Card
There is an additional COM port for
SNMP/WEB Interface SNMP card with
golden finger. This COM port is used
to do the configuration or connect to a
environmental sensor box.
•mini SNMP Card
Due to the limitation of PC board size,
mini SNMP card has no COM port;
other than that, the other features are
all the same.
The settings of Dip Switch are different, too. In the normal mode, SNMP/WEB Interface SNMP card needs to set the dip
switches to the OFF position but the mini SNMP card needs to set to the ON position.
1.1-1
Network Port
COM Port
Dip Switch
1.1-2
Dip Switch
Network Port
YOUR CONNECTION TO SAFETY
Thiele KG • Vorderer Weinberg 26 • D-71522 Backnang • Tel.: [phone] • Fax.: [phone] • [email protected] • www.thiele-kg.de
Thiele KG • Vorderer Weinberg 26 • D-71522 Backnang • Tel.: [phone] • Fax.: [phone] • [email protected] • www.thiele-kg.de
YOUR CONNECTION TO SAFETY
klick to
www
u-s-v
YOUR CONNECTION TO SAFETY
klick to
www
ACDC-DCDC
YOUR CONNECTION TO SAFETY
klick to
www
SYSTEME
YOUR CONNECTION TO SAFETY
klick to
www
CONTACT
YOUR CONNECTION TO SAFETY
klick to
www
CALLBACK

5
- Ref.: IOMNETRTXX02-GB 01
ENGLISH
1. INTRODUCTION
1.2 Features
• Network connection through RJ45 connector
Allows connection of the UPS directly to the ethernet network through a RJ45 connector without using RS232 ports on the compu-
ter and without loading any individual UPS management software on the network server.
• Network UPS management
Allows remote management of the UPS from any workstation through Internet or Intranet.
• Remote UPS monitoring via SNMP, HTTP
Allows monitoring of the UPS using MIB (Management Information Base), Internet Browser.
• Configure UPS and system functions from any client (password protected)
Set UPS and system parameters from any SNMP management station or through Internet Browsers using HTTP forms and
objects.
• Keep event logs & metering data in EEPROM
Provides a history data of UPS power events, power quality, UPS status and battery condition.
• Multiple server shutdown
The shutdown software included provides automatic shutdown either pre-programmed by administrator or when critical power
events.
... also
• Notification of users via SNMP Traps and e-mail through SMTP
• Network Time Protocol supported
• Telnet support for configuration
• BOOTP/DHCP supported
• NetBIOS Name Service supported
• MD5 HTTP security
1.3 System Application
SNMP/WEB Interface is an interface between UPS and the network. It can obtain the status from a UPS and issue commands to
it. SNMP/WEB Interface supports two kinds of protocol – SNMP and HTTP for user access. Through the SNMP NMS and Web
Browser, user can obtain the UPS status, issue commands to UPS and setting up SNMP/WEB Interface through the network.
SNMP/WEB Interface also provides shutdown software for various OS. The shutdown software that runs under various OS can link
to SNMP/WEB Interface automatically through the network and communicate with SNMP/WEB Interface via SNMP protocol. The
shutdown software retrieves UPS information from SNMP/WEB Interface. Shutdown software will then proceed to the shutdown
process in order to prevent the abnormal shutoff of host or server due to power events.
1.3-1 System Application Diagram
SNMP/WEB
Interface
SNMP Card
UPS
Power line Ethernet
Shutdown S/W
Operating
System 1
Operating
System 2
Operating
System N.
NMS Station or
Web Browser
Shutdown S/W Shutdown S/W
YOUR CONNECTION TO SAFETY
Thiele KG • Vorderer Weinberg 26 • D-71522 Backnang • Tel.: [phone] • Fax.: [phone] • [email protected] • www.thiele-kg.de
Thiele KG • Vorderer Weinberg 26 • D-71522 Backnang • Tel.: [phone] • Fax.: [phone] • [email protected] • www.thiele-kg.de
YOUR CONNECTION TO SAFETY
klick to
www
u-s-v
YOUR CONNECTION TO SAFETY
klick to
www
ACDC-DCDC
YOUR CONNECTION TO SAFETY
klick to
www
SYSTEME
YOUR CONNECTION TO SAFETY
klick to
www
CONTACT
YOUR CONNECTION TO SAFETY
klick to
www
CALLBACK

6- Ref.: IOMNETRTXX02-GB 01
2. FIRST INSTALLATION
2.1 First Installation
Please check your network environment, if there is a BOOTP/DHCP server in your LAN then begin from step 1, otherwise start
from step 9.
1. Connect the SNMP/WEB Interface device in your LAN.
2. Open the internet browser and link to the SNMP/WEB Interface device by typing the default host name “SNMP/WEB Interface”
in the address edit box.
3. Login as administrator with “admin” account and “password” for default password.
4. Open the “User Manager” page to manage your accounts and passwords.
5. There is a limitation in the “User Manager” page to restrict the login users to login in the same LAN or not. Select “Only in This
LAN” option to restrict this login account can only login in the same LAN with the SNMP card, selecting “Allow Any” allows this
account to login from anywhere.
6. Switch to the “System Configuration” page and change the default Host Name.
7. Configure the IP address, Subnet Mask, Gateway IP for SNMP/WEB Interface device. If there is no DNS server then you need to
assign IP address for mail server if you want to be notified e-mail.
8. We recommend you to disable the BOOTP/DHCP option and assign a valid static IP address.
9. Open the “Time Server” page to synchronize the SNMP/WEB Interface device and time server. Please refer to next section on
how to construct your SNTP server.
If you have no BOOTP/DHCP server in your LAN then follow belows:
10. Make sure both of the SNMP/WEB Interface device and your workstation are in the same LAN.
11. Open EzSetting from CD, and refer to next chapter for configuring SNMP/WEB Interface by EzSetting.
12. You need to change the Host Name, IP Address,…
13. Because there is no BOOTP/DHCP server in your network environment, you need to disable BOOTP/DHCP option in the System
Configuration group.
14. Please refer to next Chapter “Configuring the SNMP/WEB Interface by EzSetting” section for more detail information on confi-
guring the SNMP/WEB Interface in an easy way.
2.2 Trouble Shooting
1. How to provide a SNTP(Simple Network Timer Protocol) server for SNMP/WEB Interface?
Answer: Install the “Simple TCP/IP Services” of “Networking Services” from “Add/Remove Windows Components”. You may
need a Windows CD while installing.
Don’t forget to provide the IP address of the host in the Time Server page.
2. How to make sure the network connection is established between my workstation and SNMP/WEB Interface?
Answer: Check the networking connection by typing the following command “ping HostName or IP” from your workstation.
3. In the browser, I can see the “Login” page but cannot login?
Answer: Please check the IP addresses of the SNMP
card and the PC which you try to login. If both of
the IP addresses are not in the same LAN then
please run the EzSetting utility to configure the
User Limitation to Allow Any.
2.2-1 System Application Diagram
YOUR CONNECTION TO SAFETY
Thiele KG • Vorderer Weinberg 26 • D-71522 Backnang • Tel.: [phone] • Fax.: [phone] • [email protected] • www.thiele-kg.de
Thiele KG • Vorderer Weinberg 26 • D-71522 Backnang • Tel.: [phone] • Fax.: [phone] • [email protected] • www.thiele-kg.de
YOUR CONNECTION TO SAFETY
klick to
www
u-s-v
YOUR CONNECTION TO SAFETY
klick to
www
ACDC-DCDC
YOUR CONNECTION TO SAFETY
klick to
www
SYSTEME
YOUR CONNECTION TO SAFETY
klick to
www
CONTACT
YOUR CONNECTION TO SAFETY
klick to
www
CALLBACK

7
- Ref.: IOMNETRTXX02-GB 01
ENGLISH
2. FIRST INSTALLATION
4. How to refresh the NetBIOS table in Windows operating system?
Answer: Sometimes the IP address of SNMP/WEB Interface will be changed but keep the same host name, although Windows
will update its NetBIOS table periodically but we can force it to purge its cache immediately by typing the following
command “nbtstat -R. After that you can connect to the SNMP/WEB Interface by its host name.
5. How to get the IP address and MAC address from my computer?
Answer: In Windows system, please type “ipconfig /all” in DOS prompt. For Unix system please use “ifconfig” in the shell.
6. Unable to ping or connect to the adapter.
Answer: 1. Check all network con nections.
2. Ensure that your PC and the SNMP/WEB Interface are on the same network segment. (If you don't have a router,
this must be true.)
3. It may be that your "arp table" contains invalid entries. You can clear the "arp table" by rebooting, or by typing the
following command at the command prompt or Run dialog box.: arp -d
4. You can connect to the SNMP/WEB Interface ONLY if your PC and the SNMP/WEB Interface are using IP Addresses
from the same address block. Normally, private LANs use IP Addresses from ONE of the following blocks, which are
reserved for this purpose:
10.0.0.0 ~ 10.255.255.255
172.16.0.0 ~ 172.31.255.255
192.168.0.0 ~ 192.168.255.255
The SNMP/WEB Interface's default IP address (192.168.1.100) is from the last block. If your LAN is using a different
address block, then you will NOT be able to con nect to the UPS Adapter via the LAN.
In this case, your choices are:
• Use Terminal Mode configuration to set the SNMP/WEB Interface's IP Address.
• Use the TCP/IP arp utility to provide a (temporary) IP Address to the SNMP/WEB Interface.
• Change your PC's IP Address to allow connection via the LAN.
7. Unable to perform SNMP get operations.
Answer: Check the SNMP settings stored in the SNMP/WEB Interface. The IP Address of the PC you are using must be entered
in one of the SNMP Access Control NMS IP fields, with Read or Read/Write permission. The Community String on the
PC and SNMP/WEB Interface must match.
8. Unable to perform SNMP set operations.
Answer: Check the SNMP settings stored in the SNMP/WEB Interface. The IP Address of the PC you are using must be entered
in one of the SNMP Access Control NMS IP fields, with Read/Write permission. The Community String on the PC and
UPS Adapter must match.
9. Unable to receive traps at your management station.
Answer: Check the SNMP Trap settings in the SNMP/WEB Interface. The IP Address of the PC you are using must be entered in
one of the Target IP fields. The Community String on the PC and SNMP/WEB Interface must match.
10. Forget the administrator’s account and password.
Answer: Connect the configuration cable in console port and set both of the DIP-switches of SNMP/WEB Interface to ON position
(configuration mode) and key in the “rstadmin” while the account and password are prompted in 30 seconds. Now
the account and password of administrator are reset to default values.
YOUR CONNECTION TO SAFETY
Thiele KG • Vorderer Weinberg 26 • D-71522 Backnang • Tel.: [phone] • Fax.: [phone] • [email protected] • www.thiele-kg.de
Thiele KG • Vorderer Weinberg 26 • D-71522 Backnang • Tel.: [phone] • Fax.: [phone] • [email protected] • www.thiele-kg.de
YOUR CONNECTION TO SAFETY
klick to
www
u-s-v
YOUR CONNECTION TO SAFETY
klick to
www
ACDC-DCDC
YOUR CONNECTION TO SAFETY
klick to
www
SYSTEME
YOUR CONNECTION TO SAFETY
klick to
www
CONTACT
YOUR CONNECTION TO SAFETY
klick to
www
CALLBACK

8- Ref.: IOMNETRTXX02-GB 01
3. CONFIGURATION
The easiest way to configure the SNMP/WEB Interface is running EzSetting, you can find the software in the CD. Please see below
sub-section for more information.
If you have configured the essential network parameters successfully, you can launch the internet browser or telnet to the device
which you just assigned to do detail configuration. The first thing is to open the User Manager page and change your accounts and
passwords.
3.1 Configuring the SNMP/WEB Interface by EzSetting
1. Prepare a workstation (Microsoft Windows 9x, Me, NT4.0, 2000, 2003, XP or later installed).
2. Make sure both the DIP-switches of SNMP/WEB Interface to OFF position (default: normal mode) to enable network transmis-
sion.
3. Make sure the workstation and SNMP/WEB Interface device are in the same LAN.
4. Put the provided CD in the CD-ROM drive and find the SNMP/WEB Interface EzSetting then launch it.
5. Press the Discover button to search all
of the UPS in the LAN. All of the UPS
SNMP DEVICE will be listed in the
Device List. (See 3.1-1)
If you want to search the SNMP/WEB
Interface devices in a different domain
network, just change the subnet and
subnet mask addresses then press the
Discover button to list them.1. Prepare
a workstation (Microsoft Windows 9x,
Me, NT4.0, 2000, 2003, XP or later
installed).
3.1-1 EzSetting screen.
6. If the SNMP/WEB Interface device can
not be found, check the networking
port UDP 3456 in the OS. Open it if it
is blocked.
7. Select the device in the device list to
configure the network parameters then
press the Modify button to provide your
account and password. The default
account and password are admin and
password. (See 3.1-2)
3.1-2 Provide the account and password.
YOUR CONNECTION TO SAFETY
Thiele KG • Vorderer Weinberg 26 • D-71522 Backnang • Tel.: [phone] • Fax.: [phone] • [email protected] • www.thiele-kg.de
Thiele KG • Vorderer Weinberg 26 • D-71522 Backnang • Tel.: [phone] • Fax.: [phone] • [email protected] • www.thiele-kg.de
YOUR CONNECTION TO SAFETY
klick to
www
u-s-v
YOUR CONNECTION TO SAFETY
klick to
www
ACDC-DCDC
YOUR CONNECTION TO SAFETY
klick to
www
SYSTEME
YOUR CONNECTION TO SAFETY
klick to
www
CONTACT
YOUR CONNECTION TO SAFETY
klick to
www
CALLBACK

9
- Ref.: IOMNETRTXX02-GB 01
ENGLISH
3. CONFIGURATION
3.2 Configuring the SNMP/WEB Interface throught COM Port
1. Prepare a workstation (Microsoft Windows 9x, Me, NT4.0, 2000, 2003, XP or later installed).
2. Use the RJ45 to DB9 serial cable that provided from package connect between the SNMP/WEB Interface COM port and the
COM port on the workstation.
3. Set both the DIP-switches of the SNMP/WEB Interface device to OFF position (normal mode).
4. From the workstation running Microsoft Windows (9x, Me, NT4.0, 2000, 2003, XP or later,), and click on the HyperTerminal icon
of the accessory programs group.
5. Enter a name and choose an icon for the connection.
6. Select direct COM port connection.
7. Setup the COM port parameters - 2400 bps, 8 data bits, no parity, 1 stop bit and no flow control.
8. Set both the DIP-switches of the SNMP/WEB Interface to ON position (configuration mode). Messages will then are displayed
on the screen; afterwards, key in the administrator account (default account is admin) and password (default password is
password). The SNMP/WEB Interface configuration utility main menu will be displayed on the screen. Please refer to the Text
Mode Configuration section for more information.
3.3 Configuring the SNMP/WEB Interface throught Telnet
1. Connect the SNMP/WEB Interface to the network.
2. Prepare a workstation (Microsoft Window, Max OSX or Linux installed) which is connected to the same LAN.
3. Make sure both the DIP-switches of the SNMP/WEB Interface to OFF position (normal mode).
4. From the Windows workstation running DOS Prompt and type “telnet HostName or IP” to open the telnet connection with SNMP/
WEB Interface. For other operating system user, please run the OS shell and type the same command as in the DOS prompt.
5. Messages will then are displayed on the screen; afterwards, key in the administrator account (default account is admin) and
password (default password is password). The SNMP/WEB Interface configuration main menu will be displayed on the screen.
Please refer to the Text Mode Configuration section for more information.
Note: SNMP/WEB Interface will terminate the telnet connection if there is no data transmittion in 1 minute.
3.1-3 Configure the system parameters.
8. Click on the Configuration button and
setup the essential network parame-
ters. (See 3.1-3)
YOUR CONNECTION TO SAFETY
Thiele KG • Vorderer Weinberg 26 • D-71522 Backnang • Tel.: [phone] • Fax.: [phone] • [email protected] • www.thiele-kg.de
Thiele KG • Vorderer Weinberg 26 • D-71522 Backnang • Tel.: [phone] • Fax.: [phone] • [email protected] • www.thiele-kg.de
YOUR CONNECTION TO SAFETY
klick to
www
u-s-v
YOUR CONNECTION TO SAFETY
klick to
www
ACDC-DCDC
YOUR CONNECTION TO SAFETY
klick to
www
SYSTEME
YOUR CONNECTION TO SAFETY
klick to
www
CONTACT
YOUR CONNECTION TO SAFETY
klick to
www
CALLBACK

10 - Ref.: IOMNETRTXX02-GB 01
3. CONFIGURATION
3.4 Text Mode Configuration
3.5 User Manager
No. Function Description Default
1. Administrator Account Administrator gets the whole rights to modify the SNMP/WEB
Interface and UPS setting
“admin”
2. Administrator Password “password”
3. Administrator Limitation Restrict login area of the administrator user Only this LAN
4. Device Account Device Manager is permitted to change the network setting
but has not the ability to configure the UPS settings.
“device”
5. Device Password “password”
6. Device Limitation Restrict login area of the device manager Only this LAN
7. User Account Read Only User can observe the UPS information only. “user”
8. User Password “password”
9. User Limitation Restrict login area of the general user Only this LAN
UPS Web Card Main Menu
UPS Web Version 1.0
[1] . User Manager
[2] . System Configuration
[3] . SNMP Access Control
[4] . SNMP Trap
[5] . Time Server
[6] . Mail Server
[7] . Wake On LAN
[8] . Upgrade Firmware
[9] . Soft Restart
[a] . Reset All To Default
[b] . Reset Hub To Default
[z] . Exit Without Save
[0] . Save And Exit
Please Enter Your Choice > 1
3.4-1 SNMP/WEB Interface Main menu.
User Manager
Administrator
[1] . Account: admin
[2] . Password: ********
[3] . Limitation: Only in This LAN
Device Manager
[4] . Account: device
[5] . Password: ********
[6] . Limitation: Only in This LAN
Read Only User
[7] . Account: user
[8] . Password: ********
[9] . Limitation: Limitation: Only in This LAN
[0] . Back to Previous Menu
Please Enter Your Choice >
3.1-5 SNMP/WEB Interface User Manager menu.
YOUR CONNECTION TO SAFETY
Thiele KG • Vorderer Weinberg 26 • D-71522 Backnang • Tel.: [phone] • Fax.: [phone] • [email protected] • www.thiele-kg.de
Thiele KG • Vorderer Weinberg 26 • D-71522 Backnang • Tel.: [phone] • Fax.: [phone] • [email protected] • www.thiele-kg.de
YOUR CONNECTION TO SAFETY
klick to
www
u-s-v
YOUR CONNECTION TO SAFETY
klick to
www
ACDC-DCDC
YOUR CONNECTION TO SAFETY
klick to
www
SYSTEME
YOUR CONNECTION TO SAFETY
klick to
www
CONTACT
YOUR CONNECTION TO SAFETY
klick to
www
CALLBACK

11
- Ref.: IOMNETRTXX02-GB 01
ENGLISH
3. CONFIGURATION
3.6 System Configuration
No. Function Description Default
1. IP Address The SNMP/WEB Interface IP address. 192.168.001.100
2. Subnet Mask The sub-net m ask setting. 255.255. 255.000
3. Gateway IP The network default gateway. 192.168.001.254
4. DNS IP Domain Name Server IP address 192.168.001.001
5. BOOTP/DHCP Client Enable/Disable BOOTP/DHCP protocol Enable
6. HTTP Server Enable/Disable HTTP protocol Enable
7. Telnet Server Enable/Disable telnet protocol Enable
8. FTP Server Enable/Disable FTP protocol
For batch configuration purpose Enable
9. HTTP Server Port HTTP networking port 80
a. Telnet Server Port Telnet networking port 23
b. SNMP Get,Set Port SNMP polling and response port 161
c. SNMP Trap Port SNMP trap port 162
d. Host Name(NetBIOS) Host name for Windows SNMP/WEB Interface
e. System Contactor Alphanumeric string
f. System Location Alphanumeric string
g. Status Stable Status change confirmation check time 3
System Configuration
[1] . IP Address: 192.168.001.100
[2] . Subnet Mask: 255.255.255.000
[3] . Gateway IP: 192.168.001.254
[4] . DNS IP: 192.168.001.001
[5] . BOOTP/DHCP Client: Enable
[6] . HTTP Server: Enable
[7] . Telnet Server: Enable
[8] . FTP Server: Enable
[9] . HTTP Server Port: 80
[a] . Telnet Server Port: 23
[b] . SNMP Get,Set Port: 161
[c] . SNMP Trap Port: 162
[d] . Host Name(NetBIOS): SNMP/WEB Interface
[e] . System Contactor:
[ f ] . System Location:
[g] . Status Stable: 3
[0] . Back To Previous Menu
Please Enter Your Choice >
3.6-1 System Configuration menu.
YOUR CONNECTION TO SAFETY
Thiele KG • Vorderer Weinberg 26 • D-71522 Backnang • Tel.: [phone] • Fax.: [phone] • [email protected] • www.thiele-kg.de
Thiele KG • Vorderer Weinberg 26 • D-71522 Backnang • Tel.: [phone] • Fax.: [phone] • [email protected] • www.thiele-kg.de
YOUR CONNECTION TO SAFETY
klick to
www
u-s-v
YOUR CONNECTION TO SAFETY
klick to
www
ACDC-DCDC
YOUR CONNECTION TO SAFETY
klick to
www
SYSTEME
YOUR CONNECTION TO SAFETY
klick to
www
CONTACT
YOUR CONNECTION TO SAFETY
klick to
www
CALLBACK