Soehnle 3035 User manual

Manual
Terminal
3035

2
Thank you for purchasing the Soehnle Professional Terminal 3035.
This terminal was developed in accordance with the needs of operational practices and gives you a
wide range of options to customize the weighing process to your specific needs, and to make your
processes as efficient and cost-effective as possible.
Prior to use, please read this user manual with care.
Inappropriate use may cause harm to you or the terminal.
If you have questions or experience problems with your terminal that are not addressed in the user
manual, please contact your Soehnle Industrial Solutions service location or the customer service
department of Soehnle Industrial Solutions.
Telephone: [phone]
Fax: [phone]
E-mail: [e-mail]

3
Table of Contents Page
1. General Information ..............................................................................................................8
1.1 Intended uses .................................................................................................................................. 8
1.2 Safety instructions ........................................................................................................................... 8
1.3 Cleaning .......................................................................................................................................... 9
1.4 Maintenance and service .................................................................................................................. 9
1.5 Product Warranty/liability ................................................................................................................. 9
1.6 Setup instructions ...........................................................................................................................10
2. Equipment description.........................................................................................................11
2.1 Connections and equipment description ...........................................................................................11
2.2 Technical Specifications ...................................................................................................................11
2.3 Symbols in the symbol bar of the display..........................................................................................12
2.4 Calibration instructions...................................................................................................................13
2.4.1 Type tag .................................................................................................................................13
2.4.2 Calibration counter .................................................................................................................13
2.5 On / Off switching...........................................................................................................................14
3. Operating concept ..............................................................................................................15
3.2 Program mode ................................................................................................................................16
3.3 Function keys..................................................................................................................................16
4.Setup mode……...…………………………………………………………………………………………………………………………… 17
4.1 Starting setup mode........................................................................................................................19
4.2 Program settings.............................................................................................................................21
4.3 Setup mode settings / terminal........................................................................................................22
4.4 Setup mode settings / terminal........................................................................................................27
4.5 Setup mode settings / communication..............................................................................................30
4.6 Setup mode settings / Service..........................................................................................................37
4.7 Reset Terminal ................................................................................................................................37
5. Basic functions ...................................................................................................................38
5.1 Switch on .......................................................................................................................................38
5.2 Switch off.......................................................................................................................................38
5.3 Program selection ...........................................................................................................................38
5.4 Zero set..........................................................................................................................................38
5.5 Tare function ..................................................................................................................................39
5.6 Gross display...................................................................................................................................39
5.7 Scale switching ...............................................................................................................................39
5.8 Ten X display x10 ............................................................................................................................40
5.9 Hold function..................................................................................................................................41
5.10 Secondary display..........................................................................................................................42
5.10.1 Second unit of measure .........................................................................................................44
5.11 Organization data (Identifier) ........................................................................................................46
5.12 Alpha-numeric data entry ..............................................................................................................49
5.13 Key locks ......................................................................................................................................50
5.14 User password...............................................................................................................................51
5.15 Login function / Start function process ..........................................................................................51
6 Application Programs ...........................................................................................................56
6.1 Selecting application programs ........................................................................................................56
6.2 Function keys..................................................................................................................................56
6.3 Navigating the application programs ................................................................................................57

4
6.4 Custom programs ............................................................................................................................57
6.5 Weighing and tare...........................................................................................................................58
6.5.1 Function keys ..........................................................................................................................58
6.5.2 Display screen .........................................................................................................................58
6.5.3 Information field display ..........................................................................................................59
6.5.4 Weighing without tare .............................................................................................................60
6.5.5 Manual tare.............................................................................................................................60
6.5.6 Tare with manual tare entry.....................................................................................................60
6.5.7 Multiplication tare ...................................................................................................................61
6.5.8 Cumulative tare .......................................................................................................................61
6.5.9 Intermediate tare ....................................................................................................................62
6.5.10 Automatic tare ......................................................................................................................62
6.5.11 Fixed tare value memory ........................................................................................................63
6.5.12 Error messages during tare ....................................................................................................64
6.5.13 Display options with the Info key ...........................................................................................65
6.5.14 Save the current values to fixed memory ................................................................................65
6.5.15 Organization data (Identifier).................................................................................................66
6.5.16 Settings in setup mode ..........................................................................................................66
6.6 Totaling + picking............................................................................................................................68
6.6.1 Function keys ..........................................................................................................................68
6.6.2 Display screen .........................................................................................................................69
6.6.3 Information field display ..........................................................................................................70
6.6.4 Tare function ..........................................................................................................................70
6.6.5 Operating the addition function ...............................................................................................71
6.6.6 Available selections for the totaling display ..............................................................................71
6.6.7 Relief factor for totaling ..........................................................................................................72
6.6.8 Auto totaling / picking .............................................................................................................72
6.6.9 Preferred totaling scale ...........................................................................................................72
6.6.10 Assigning and deleting the sequential number ........................................................................73
6.6.11 Item counter .........................................................................................................................73
6.6.12 Keys that trigger printouts.....................................................................................................73
6.6.13 Display current totals.............................................................................................................73
6.6.14 Display individual items ..........................................................................................................74
6.5.15 Display options with the Info key ...........................................................................................75
6.6.16 Save the current values to fixed memory ................................................................................75
6.6.17 Organization data (Identifier).................................................................................................76
6.6.18 Settings in setup mode ..........................................................................................................76
6.7 Counting.........................................................................................................................................78
6.7.1 Function keys ..........................................................................................................................78
6.7.2 Counting display screen ...........................................................................................................79
6.7.3 Information field display ..........................................................................................................80
6.7.4 Tare function ..........................................................................................................................80
6.7.5 Counting function....................................................................................................................81
6.7.6 Totaling + picking ....................................................................................................................83
6.7.7 Reference statistics .................................................................................................................87
6.7.8 Unit control.............................................................................................................................88
6.7.9 Counting with several weighing bridges ....................................................................................89
6.7.10 Counting accuracy .................................................................................................................90
6.7.11 Display options with the Info key ...........................................................................................91
6.7.12 Save the current values to fixed memory ................................................................................91
6.7.13 Organization data (Identifier).................................................................................................92
6.7.14 Settings in setup mode ..........................................................................................................93
6.8 Controlling......................................................................................................................................97
6.8.1 Function keys ..........................................................................................................................97
6.8.2 Display screen .........................................................................................................................98
6.8.3 Information field display ..........................................................................................................99
6.8.4 Tare function ..........................................................................................................................99

5
6.8.5 Control functions.....................................................................................................................99
6.8.6 Totaling + picking ..................................................................................................................102
6.8.7 Display options with the Info key ...........................................................................................106
6.8.8 Saving current values to fixed memory ...................................................................................106
6.8.9 Organization data (identifier).................................................................................................107
6.8.10 Settings in setup mode ........................................................................................................107
6.9 Classifying ....................................................................................................................................111
6.9.1 Function keys ........................................................................................................................111
6.9.2 Display screen .......................................................................................................................112
6.9.3 Information field display ........................................................................................................113
6.9.4 Tare function ........................................................................................................................113
6.9.5 Classification functions ..........................................................................................................113
6.9.6 Totaling + picking ..................................................................................................................116
6.9.7 Display options with the Info key ...........................................................................................120
6.9.8 Save the current values to fixed memory ................................................................................120
6.9.9 Organization data (identifier).................................................................................................121
6.9.10 Settings in setup mode ........................................................................................................121
6.10 Recipes.......................................................................................................................................124
6.10.1 Function keys ......................................................................................................................124
6.10.2 Display view ........................................................................................................................125
6.10.3 Display information field ......................................................................................................126
6.10.4 Tare function.......................................................................................................................126
6.10.5 Recipe functions..................................................................................................................126
6.10.6 Component control ..............................................................................................................129
6.10.7 Display options with the Info key .........................................................................................131
6.10.8 Organization data (Identifier)...............................................................................................131
6.10.9 Settings in setup mode ........................................................................................................132
6.11 Neutral measurements ................................................................................................................134
6.11.1 Function keys ......................................................................................................................134
6.11.2 Display view ........................................................................................................................135
6.11.3 Display information field ......................................................................................................136
6.11.4 Tare function.......................................................................................................................137
6.11.5 Neutral measurement functions ...........................................................................................137
6.11.6 Totaling + picking ................................................................................................................139
6.11.7 Quantity control ..................................................................................................................143
6.11.8 Neutral measurement with several weighing bridges .............................................................145
6.11.9 Display options with the Info key .........................................................................................145
6.11.10 Save the current values to fixed memory ............................................................................146
6.11.11 Organization data (Identifier) .............................................................................................146
6.11.12 Settings in setup mode ......................................................................................................147
6.12 Motor vehicle scale......................................................................................................................150
6.12.1 Function keys ......................................................................................................................150
6.12.2 Display view ........................................................................................................................151
6.12.3 Display information field ......................................................................................................152
6.12.2 Tare function.......................................................................................................................152
6.12.3 Motor vehicle scale functions ...............................................................................................153
6.12.4 Totaling...............................................................................................................................158
6.12.5 Indicator light control ..........................................................................................................161
6.12.6 Vehicle control.....................................................................................................................162
6.12.7 Display options with the Info key .........................................................................................163
6.12.8 Organization data (Identifier)...............................................................................................163
6.12.9 Settings in setup mode ........................................................................................................163
6.13 Dynamic switching.......................................................................................................................166
6.13.1 Function keys ......................................................................................................................166
6.13.2 Display view ........................................................................................................................167
6.13.3 Display information field ......................................................................................................168
6.13.4 Tare function.......................................................................................................................168

6
6.13.5 Enabling IO control ..............................................................................................................168
6.13. 6 Dynamic switching functions ...............................................................................................169
6.13.7 Totaling + picking ................................................................................................................174
6.13.9 Save the current values to fixed memory ..............................................................................178
6.13.10 Organization data (Identifier) .............................................................................................179
6.13.11 Settings in setup mode ......................................................................................................179
6.14 Percent weighing ........................................................................................................................182
6.14.1 Function keys ......................................................................................................................182
6.14.2 Display view ........................................................................................................................183
6.14.3 Display information field ......................................................................................................184
6.14.3 Tare function.......................................................................................................................184
6.14.4 Percent weighing functions ..................................................................................................185
6.14.5 Totaling + picking ................................................................................................................186
6.14.6 Percent Control ...................................................................................................................190
6.14.7 Display options with the Info key .........................................................................................191
6.14.8 Organization data (Identifier)...............................................................................................192
6.14.9 Settings in setup mode ........................................................................................................192
7. Communication .................................................................................................................194
7.1 Alibi memory.................................................................................................................................194
7.1.1 Enable alibi memory...............................................................................................................194
7.1.2 Read alibi memory .................................................................................................................195
7.1.3 Expanded add-on field in alibi memory....................................................................................196
7.1.4 Delete and disable alibi memory .............................................................................................197
7.2 Interface 1 RS 232 (internal) .........................................................................................................198
7.3 Port 2...........................................................................................................................................199
7.4 Port 3...........................................................................................................................................200
7.5 USB ..............................................................................................................................................201
7.5.1 Data logger ...........................................................................................................................202
7.6 Ethernet .......................................................................................................................................203
7.7 Print format ..................................................................................................................................204
7.8 IT settings.....................................................................................................................................205
7.9 Anybus .........................................................................................................................................207
7.10 Barcode ......................................................................................................................................208
7.10.1 Decimal delimiter, numeric ...................................................................................................208
7.10.2 Display scanned values in the display field ............................................................................209
7.10.3 Barcode selection filter ........................................................................................................210
7.10.4 Barcode printing and output ................................................................................................213
7.11 IO Control ...................................................................................................................................214
7.11.1 Selecting IO operating modes...............................................................................................214
7.11.2 Outputs...............................................................................................................................215
7.11.3 Inputs .................................................................................................................................221
8. PRINT...............................................................................................................................225
8.1 Standard print formats / factory defaults .......................................................................................225
8.2 Conditions that trigger printouts....................................................................................................231
8.3 Configure interface for printer.......................................................................................................232
8.4 Quick change of print formats .......................................................................................................232
9. SERVICE............................................................................................................................233
9.1 Error messages .............................................................................................................................233
Your dealer and service partner or the service department from Soehnle Industrial Solutions are available
to assist you with the next troubleshooting steps.................................................................................236
9.2 Error list .......................................................................................................................................236
9.3 Mirco SD card................................................................................................................................236
9.4 Software update ...........................................................................................................................236
9.5 Supplemental documentation.........................................................................................................238

7

8
1. General Information
1.1 Intended uses
The Soehnle Professional Terminal 3035 is a calibratable terminal for use in scales and weighing
systems with commercially available DMS weighing and load cells.
Up to three analog measurement locations (scales) can be internally connected at the same
time. Up to 29 external measurement locations are possible via CAN bus. Yet another scale can
be connected e.g. as reference scale with the serial interface. Additional data can be entered
with the keypad. Various interface options are available for connecting printers, IT, readers,
data storage, and external PC keypads.
The Soehnle Professional Terminal 3035 was designed for efficient operations even in rough
environments. It is rugged, easy to clean, flexible, and fast. A logical design and user interface
facilitate fast learning and intuitive terminal operations. The terminal design adjusts to your
specific needs and supports you in your job.
1.2 Safety instructions
Before operating the terminal, please read the information shown in the user manual with care. It
contains important information about the installation, the intended uses, and maintenance of the
terminal.
The manufacturer is not liable if the following instructions are not observed:
When using electrical components under elevated safety requirements, the corresponding
regulations must be adhered to. Never perform service work on the terminal while the unit is under
power. The product warranty is null and void if the terminal is installed inappropriately.
•The terminal 3035 is not approved for ATEX environments. A custom version is available
for ATEX zones 2 and 22.
•The rated mains voltage is 100 – 240 volts. The power outlet must be grounded and
easily accessible.
•The terminal must only be opened by trained Soehnle Industrial Solutions service
technicians. The housing contains no user-serviceable components. Unauthorized
manipulations render the product warranty null and void.
•Only a trained Soehnle Industrial Solutions service location is authorized to make repairs
and to replace or install components.
•The terminal must be taken out of service if the power cable is damaged. Disconnect the
power supply and contact a Soehnle Industrial Solutions service location.
•The attached security labels must not be damaged if the terminal is used for functions
with calibration mandate.
Contact your Soehnle Industrial Solutions service partner if you experience problems.

9
1.3 Cleaning
Cleaning only requires a moist cloth and commercially available cleaning agents.
Do not use abrasive or corrosive agents.
1.4 Maintenance and service
Note:
This equipment corresponds to the applicable EC directives EG 2009/23/EC, 2004/108/EC,
2006/95/EC and EN45501. However, the scale can be influenced under extreme electrostatic and
electromagnetic interference, e.g. when operating a radio transmitter or mobile telephone in the
immediate vicinity of the units.
The product can again be used as intended after the interference has ended;
a reboot may be required. If electrostatic interference is permanent in nature, we recommend
grounding the terminal housing and the platform.
The terminal is a measurement instrument. Airflow, vibrations, rapid temperature swings, and sun
exposure can influence the weighing result. The terminal meets IP 67 protection standards. Very
high relative humidity, vapors, aggressive fluids, and significant dirt buildup must be avoided.
1.5 Product Warranty/liability
When a defect in the delivered item is attributable to Soehnle Industrial Solutions, Soehnle
Industrial Solutions is entitled at its discretion to either remedy the defect or to supply a
replacement. Replaced parts become the property of Soehnle Industrial Solutions.
The statutory regulations apply if the defect remedy or replacement delivery fail.
The product warranty period begins on the date of purchase. Please retain the invoice as proof. For
service contact your dealer or the Soehnle Industrial Solutions customer service department.
No liability is assumed, in particular for losses resulting for the following
reasons:
Unsuited, inappropriate storage or use, defective assembly and/or startup by the buyer or third
parties, normal wear and tear, modifications or manipulations, deficient or careless treatment, in
particular excessive loads, chemical, electrochemical, electrical influences, or moisture, provided
these are not attributable to Soehnle Industrial Solutions.
The product warranty for the unrestricted overall function of the equipment is null and void if
operational, climatic, or other influences result in a significant change of circumstances or the
condition of the material. When Soehnle Industrial Solutions honors the product warranty on a
case-by-case basis, this implies the absence of defects on the delivered item during the product
warranty period. Please keep the original packaging for any required return shipments.

10
1.6 Setup instructions
Please inspect the packaging and terminal for external damage. Do not place a visibly damaged
terminal into service, but inform your dealer instead.
Please keep the packaging for any required shipping.
The terminal was designed for rough commercial operations. It is nevertheless a sensitive
measurement instrument whose performance can be influenced by unfavorable environmental
conditions.
The unit should be acclimated at ambient temperature for 2 hours after unpacking or transport.
The rated ambient temperature is - 10° to + 40° C.
The setup location is a key factor for the function of your scale.
Select an appropriate setup location to protect the terminal against impact, vibration, excessive
heat or cold, temperature swings, airflow, chemicals, and moisture to ensure that the unit can
work fast and reliably over the long-term.