Soehnle 2750 User manual

1
www.soehnle- 1
www.soehnle-
www.soehnle-professional.com
Anzeigegerät 2750
Bedienungsanleitung
Display terminal 2750
ser manual
Indicateur 2750
Mode d’emploi

7
www.soehnle
-
professional.com
MODELS
MODELSMODELS
MODELS
2750 Indicator, approvable
> 2750.11.001 Indicator wit mains adaptor wit out wall bracket, approvable
> 2750.11.002 Indicator wit mains adaptor wit wall bracket, approvable
> 2750.11.003 Indicator wit mains adaptor wit wall and stand bracket, approvable
> 2750.12.001 Indicator wit battery operation wit out wall bracket
> 2750.02.002 Indicator wit battery operation wit wall bracket
> 2750.02.003 Indicator wit battery operation wit wall and stand bracket
2750 Indicator, non approvable
> 2750.01.001 Indicator wit mains adaptor wit out wall bracket, non approvable
> 2750.01.002 Indicator wit mains adaptor wit wall bracket, non approvable
> 2750.01.003 Indicator wit mains adaptor wit wall and stand bracket, approvable
> 2750.02.001 Indicator wit battery operation wit out wall bracket
> 2750.02.002 Indicator wit battery operation wit wall bracket
> 2750.02.003 Indicator wit battery operation wit wall and stand bracket
APPLICATION
APPLICATIONAPPLICATION
APPLICATION
T e Soe nle Professional 2750 displays are designed for weig ing patients. T ese displays are
intended for environments subject to calibration regulations. T ey comply wit EC Directives
2004/108/EC, 2006/95/EC, 2009/23/EC, 2007/47/EC and 93/42/EEC.
SAFTY NOTICES
SAFTY NOTICESSAFTY NOTICES
SAFTY NOTICES
Read t e user manual carefully before using t e equipment for t e first time. It contains
important information concerning t e installation, correct use and maintenance of t e
equipment. T ere are no specific requirements for personnel – t e scales can be used
universally. T e scales are not designed to be used in critical environments (CT, defi-brillators).
T e displays cannot be used in potentially explosive areas. T e displays must be assembled so
t at t ey can be easily disconnected from underneat .
Do not seat or lean on t e glass indicator.
T e manufacturer s all not be eld liable if t e following instructions are n
T e manufacturer s all not be eld liable if t e following instructions are nT e manufacturer s all not be eld liable if t e following instructions are n
T e manufacturer s all not be eld liable if t e following instructions are not observed:
ot observed: ot observed:
ot observed:
T e equipment is designed for use in buildings. T e equipment complies wit electromagnetic
compatibility requirements. Do not exceed t e maximum values specified in t e standards. If
you ave any problems, contact your Soe nle Professional service partner. Only 60601-1
approved medical equipment may be connected to t e interface.

8
www.soehnle
-
professional.com
Warning
WarningWarning
Warning: T e medical equipment must not be altered. T is device must not be c anged wit out
t e manufacturer‘s permission. If t e medical device is c anged, suitable tests and c ecks must
be performed to ensure t at it can still be used safely.
CLEANING
CLEANINGCLEANING
CLEANING
T e device may be cleaned wit a damp clot and customary cleaning products. Do not use any
abrasive cleaning products. Disinfectants to be used: met ylated spirit; isopropanol; 2%
Ko rsolin; 1% aqueous Sokrena solution; 5% Sagrotan; 5% Gigasept. T e device and t e mains
supply must not be sprayed.
MAINTENANCE
MAINTENANCEMAINTENANCE
MAINTENANCE
A metrological c eck as been performed by t e manufacturer. Recalibration must be carried
out in accordance wit national regulations. Repairs must only be carried out by a Soe nle
Professional aut orized centre using original parts.
NOTE
NOTENOTE
NOTE
In accordance wit European directive 2004/108/EC t is device is fitted wit noise suppression.
However, t e display reading can be affected by extreme electrostatic or electromagnetic
interference, e.g. using a radio or mobile p one in t e immediate vicinity of t e equipment.
Once t e interference stops, t e product may revert to normal operation. However, it may be
necessary to restart t e display. If t e fault persists, contact your dealer or t e Soe nle
Professional customer service department. T is device is a measuring instrument. Draft,
vibrations, rapid temperature c anges and direct exposure to sunlig t may affect t e weig ing
readings. Avoid ig air umidity levels, steam, abrasive fluids and contamination.
CAUTION
CAUTIONCAUTION
CAUTION
T ese displays are subject to special precautionary measures in terms of EMC and must be
installed and started up in accordance wit t e EMC instructions in general. Portable and mobile
HF communications equipment can affect t e displays if broug t into close proximity.
WARRANTY/LIABILITY
WARRANTY/LIABILITYWARRANTY/LIABILITY
WARRANTY/LIABILITY
If t e supplied goods contain a defect attributable to Soe nle Professional, Soe nle
Professional s all be entitled to rectify t e defect or provide a replacement. Replaced parts will
become t e property of Soe nle Professional. T e legal provisions apply if t e repair of t e
defect or t e delivery of t e replacement device s ould fail. T e warranty period extends for 2
years, starting on t e date of purc ase. Please keep your invoice as proof of purc ase. If your
device needs service, contact your dealer or t e Soe nle Professional Customer Service. Soe nle
Professional does not accept any liability for any damage resulting from t e following causes:
Unsuitable, improper storage or utilization, faulty assembly or startup by t e ordering person or
by a t ird party, natural wear and tear, modifications or c anges, faulty or negligent andling,
particularly excessive loads, c emical, electro-c emical, electrical influences or dampness,

9
www.soehnle
-
professional.com
insofar as t ese cannot be attributed to Soe nle Professional. T e warranty liability concerning
a correctly operating device is cancelled if operational, climactic or similar influences result in a
substantial c ange of t e circumstances or of t e condition of t e material. W ere Soe nle
Professional provides a warranty in individual cases, t is implies freedom from defects to t e
goods for t e duration of t e warranty period.
Keep t e or
Keep t e orKeep t e or
Keep t e original packaging in case of t e need for returns.
iginal packaging in case of t e need for returns.iginal packaging in case of t e need for returns.
iginal packaging in case of t e need for returns.
DISPOSAL OF THE SCALES
DISPOSAL OF THE SCALESDISPOSAL OF THE SCALES
DISPOSAL OF THE SCALES
T is product is not to be treated as regular ouse old waste, but s ould be anded in to an
electrical/electronic equipment recycling centre.
You can obtain furt er details from your local council, your municipal waste disposal company
or t e firm from w ic you purc ased t e product.
WEIGHING
WEIGHINGWEIGHING
WEIGHING
Turn on t e display using t e on-off-tara-button on t e rear of t e indicator and >> 0,00 kg <<
appears on t e display. T e scale is ready for weig ing now.
!Getting started 2750: Please load t e battery at least for 5 ours, before using t e display
!Getting started 2750: Please load t e battery at least for 5 ours, before using t e display !Getting started 2750: Please load t e battery at least for 5 ours, before using t e display
!Getting started 2750: Please load t e battery at least for 5 ours, before using t e display for
for for
for
t e first time!
t e first time!t e first time!
t e first time!
TARING
TARINGTARING
TARING
T e on-off-tara-button on t e rear of t e display resets t e scale to zero. Press t e key. T e
display s ows »0.0 kg« and t e scale is ready for use.
CHAN
CHANCHAN
CHANG
GG
GING THE UNITS OF MEASUREMENT BY NON APPROVABLE SCALES
ING THE UNITS OF MEASUREMENT BY NON APPROVABLE SCALESING THE UNITS OF MEASUREMENT BY NON APPROVABLE SCALES
ING THE UNITS OF MEASUREMENT BY NON APPROVABLE SCALES
As standard, t e scale operates wit kg as t e unit of measurement. Please proceed as follows
if you want to c ange t e scale’s unit of measurement:
> Pull t e power adapter from t e outlet.
> Press and old t e function key w ilst simultaneously putting
t e power adapter into t e outlet.
> T e displayed value c anges to lbs.
To switc back again to kg, repeat t e instructions above.
SWITCH OFF
SWITCH OFFSWITCH OFF
SWITCH OFF
>
> >
> 2750
2750 2750
2750 I
II
Indicator wit mains adapter
ndicator wit mains adapterndicator wit mains adapter
ndicator wit mains adapter: T e scales automatically switc off w en t e display as
s own >> 0,00 kg << for approx. 60 seconds. To switc t e scales off completely, remove t e
connector from t e socket.

10
www.soehnle
-
professional.com
> 2750
> 2750 > 2750
> 2750 Indicator wit battery operation
Indicator wit battery operationIndicator wit battery operation
Indicator wit battery operation:
::
: T e scales automatically switc off after approx. 60
seconds and switc es into standby-mode. By using t e on-/off-button on t e rear of t e
indicator t e scales is activated again.
CALIBRATION METER
CALIBRATION METERCALIBRATION METER
CALIBRATION METER FOR APPROVABLE SCALES
FOR APPROVABLE SCALES FOR APPROVABLE SCALES
FOR APPROVABLE SCALES
T e calibration meter reading s ows ow often t e scales ave been calibrated. T e meter
reading stored must matc t e calibration meter plate secured wit ad esive label.
CALIBRATION METER READING DISPLAY
CALIBRATION METER READING DISPLAYCALIBRATION METER READING DISPLAY
CALIBRATION METER READING DISPLAY FOR APPROVABLE SCALES
FOR APPROVABLE SCALES FOR APPROVABLE SCALES
FOR APPROVABLE SCALES
>
> >
> 2750
2750 2750
2750 Indicator wit
Indicator witIndicator wit
Indicator wit mains adapter
mains adapter mains adapter
mains adapter: T e calibration meter reading is displayed for 2 seconds
w en t e mains power adapter is inserted.
> 2750
> 2750 > 2750
> 2750 Indicator wit
Indicator witIndicator wit
Indicator wit battery operation
battery operation battery operation
battery operation:
: :
: T e calibration meter reading is displayed for 2
seconds wit direct activation of t e indicator.
INTERFACE: USB
INTERFACE: USBINTERFACE: USB
INTERFACE: USB
Can only be used for EN 60601-1 approved medical devices or for special purposes or to
transfer t e weig ing results to a personal computer via data cable.
Optional: data cable: 2550.03.019
ERROR MESSAGES
ERROR MESSAGESERROR MESSAGES
ERROR MESSAGES
Err5
Err5 Err5
Err5 –
––
– Zero setting:
Zero setting: Zero setting:
Zero setting: Not idle. C eck ground stability. Contact your service department if
t ere is still an error message.
Err6
Err6 Err6
Err6 –
––
– Taring
TaringTaring
Taring not possible:
not possible: not possible:
not possible: Not idle. Remain calm or take t e weig t placed in idle state.
------
------------
------
-
--
- Overload:
Overload: Overload:
Overload: Remove t e weig t from t e platform and c eck t e max. weig ing
range.
-------
------------
------
-
--
- Low load r
Low load rLow load r
Low load reading:
eading: eading:
eading: Restart t e scale. Contact your service department if t ere is
still an error message.
-
--
-
0
00
0
—
——
—
-
--
- T e scales are set to zero w en powered up:
T e scales are set to zero w en powered up: T e scales are set to zero w en powered up:
T e scales are set to zero w en powered up:
Unload t e scale and restart t e display. If t e error remains
contact your service department.

11
www.soehnle
-
professional.com
WARNING NOTICES
WARNING NOTICESWARNING NOTICES
WARNING NOTICES
> In case of malfunction contact dealer or manufacturer. Unaut orized modifications or repairs
can damage your scales and will terminate manufacturer warranty.
> Indicators must not get wet. Liquids (e.g. water) can damage scales. Use dry clot suc as
towel to dry scales.
> Do not use abrasive cleaners to avoid damage to surface.
> Disconnect all power to t is unit before installing, cleaning or servicing. Failure to do so could
result in bodily arm or damage t e unit.
> Avoid installing t e scale in direct sunlig t, w ic may cause discoloration.
> If t e scale is not to be used for a long period of time, remove t e power supply or turn of
t e power wit battery operation to guarantee proper weig ing results.
> Avoid stack materials on t e scale, w en scale is not in use.
> Avoid unsuitable tables. T e tables or floor must be rigid and not vibrate. Do not place near
vibrating mac inery.
> Avoid unstable power sources.
> Only use original equipment, ot er could cause damage to t e scale.
!
!!
!Please load t e batter
Please load t e batterPlease load t e batter
Please load t e battery
yy
y at least for 5 ours, before using t e display
at least for 5 ours, before using t e display at least for 5 ours, before using t e display
at least for 5 ours, before using t e display for
for for
for t e first time!
t e first time!t e first time!
t e first time!