Soldron MSVW User manual

Thank you for choosing Soldron®as your preferred
soldering brand. This product will give you the perfect
soldering experience with longevity, efficiency and
reliability.
We also offer after sales service and assistance in
order to help you maintain your product in perfect
working condition
MSVW STATION
SOLDRON VARIABLE WATTAGE
MICRO-SOLDERING STATION

MSVW
1) Clean the tip with the provided cleaning sponge to remove
all oxides and flux deposits on the tip. This improves the
effectives of the bit over long term usage.
2. After the soldering job is complete, clean the tip and coat
it with solder to enhance its life.
Important Points for tip care
1 x Soldering iron station
1 x Spring Soldering Iron holder
1 x High Quality cast iron base stand
1 x Sponge
Package Contents :
Features:
1) Ideal for precision small jobs like SMT and micro-electronics.
2) Element shaft is only 2.5mm thick with an isolated element.
3) It can be set to high, medium or low with a continuously
variable knob.
4) Comes standard with an aluminium coated long life tip.
5) Very popular amongst mobile repairers / sculpture of
wax casting.
1) Be sure to lightly wet the sponge and place carefully on
the stand provided
2) you can add a little bit of water to the space under the
sponge section to avoid it from drying up during use.
3) Put the iron in the provided stand.
4) Connect the mains cord into the mains socket.
5) On power up, the red led on the station light ups.
6) Set the temperature using knob as per requirement.
7) Wait for few seconds to heat the micro iron.
8) The iron is now ready for use.
Set up and operation:

MSVW
1) Using files and abrasive material to clean the tip, will
loss away the protective iron coating to expose the copper,
which will make the tip useless.
2) When the tip develops a hole due to loss of protective iron
coating, it's time to purchase and replace the bit with an
original Soldron®bit.
CAUTION!:
Vimla Engineering
A2/157,Shah & Nahar lndustrial Estate, S. J. Marg,
Lower PareI ( W), Mumbai - 400 013.
Tel No. : 022-48973337
www.soldron.com
Specifications:
Name
Soldron
®
MSVW
Power Consumption
Input Voltage
Output Voltage
Temperature Range
Wire Length
5W to 13W variable
230VAC
5VDC – 12VDC
200°C - 350°C
3 core mains cord 1.2mtrs
2 core iron wire