Soleus Air WS2-15E-201 User manual

V181219
Air conditioner must be upright for 24 hours prior to operating.
This ensures that the compressor will function as intended.
Model
WS2-15E-201 15,000 BTU
WS2-18E-201 18,300 BTU
WS2-24E-201 24,000 BTU
Electronic Window Air Conditioner
Operating Instructions
AIR CONDITIONER
2MF3
File No. SA 12793

Thank you for choosing a Soleus Air Window Air Conditioner. This Owner’s Manual will provide
you with valuable information necessary for the proper care and maintenance of your new product.
Please take a few moments to thoroughly read the instructions and familiarize yourself with all the
operational aspects of your new Soleus Air Window Air Conditioner.
For your own records, please attach a copy of your sales receipt to this manual. Also, write the
store name/location, date purchased, and serial number below:
Store Name: ____________________________________________________
Location: _____________________________________________________
Date Purchased: _________________________________________________
Serial Number (located on back of unit): ______________________________
IMPORTANT INSTRUCTIONS
PURCHASE INFORMATION
Before installing and using your air conditioner, please read this owner’s manual carefully. Store this manual in a
safe place for future reference. Your safety and the safety of others is very important to us. Please pay attention to
all safety messages outlined in this owner’s manual.
WARNING: To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic
precautions:
• Plug into a grounded 3 prong outlet.
• Do not remove the ground prong.
• Do not use a plug adapter.
• Do not use an extension cord.
• Unplug the air conditioner before servicing.
• Use two or more people to move and install the air
conditioner.
This is a safety alert symbol.
This symbol alerts you to potential hazards that can harm you or others or even cause death.
All safety messages will directly follow the safety alert symbol and/or the words “DANGER”
or “WARNING.”
All Safety messages alert you of potential hazards, how to reduce the chance of injury, and what
can happen if instructions are not followed correctly.
Failure to immediately follow these in-
structions may cause serious injury or
even death.

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord
and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexi-
ble cord with no termination on the load side and a LCDI attachment plug on the line side.
The LCDI power cord and plug will remove the supply source via electrical disconnect (circuit trip) if the
nominal current leakage between the cord shield and either load conductor exceeds a predetermined value.
The cord will remain de-energized until the device has been manually reset. This is intended to reduce the
risk of a fire in the power cord or combustible materials nearby. The cord shields are not grounded and they
must be considered a shock hazard if exposed. The cord shield must not be connected to ground or to any
exposed metal.
The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly.
To test:
1. Plug power cord into wall outlet, the LED light will turn on.
2. Press TEST Button, circuit should trip, cutting power to the air conditioner. When this occurs, the LED
light will turn off.
3. Press RESET button to restore power to the unit. Once power is restored, the LED light will turn on.
If test button is pressed and unit can still be turned on, current leakage has been detected. Do not use the air
conditioner or attempt to reset the LCDI Plug. Contact Customer Service for troubleshooting recommenda-
tions.
WARNING:
1. DO NOT press the TEST button while the air conditioner is operating.
2. The TEST and RESET buttons should not be used as “ON” and “OFF” switches.
3. The cord and plug are not intended to offer protection to externally connected loads or supply circuits.
4. The cord and plug are intended for indoor use only.
POWER CORD AND PLUG
RESET
TEST
LED LIGHT
Note: Your unit’s power cord may
differ from the one shown.

PACKAGE CONTENTS
• Window Air Conditioner (1)
• Remote Control (1)
• AAA Battery (2)
• Top Mounting Rail (1)
• Foam Gasket (1)
• Curtain (2)
• Foam Seal for Bottom Rail (1)
• Hardware Bag (1)
• Owner’s Manual (1)
• Weather Insulation Board (2)
• Window Sash Seal (1)
• Window Support Bracket (2)
TOOLS NEEDED
Large Flathead Screwdriver
Tape Measurer
Adjustable Wrench or Pliers
Pencil
Level
Socket Wrenches
Phillips Head Screwdriver
Hardware
(In plastic Bag)
Quantity
1
4
2
2
2
13
10
Sash Lock
Screw and
Locknut
Flathead Bolt
and Locknut
Sill Angle
Bracket
Curtain Lock
Long Screws
Short Screws

SPECIFICATIONS
• Noise level is measured at a distance of 3.28 ft away from the front of the unit in cooling mode.
• Power consumption is measured when the fan runs at the highest speed setting.
• These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit.
Model WS2-15E-201
Power Supply (Ph/V/Hz) 1/115/60
Rated Cooling Capacity (BTU/h) 15,000
Cooling Power Input (Watts) 1,230
Rated Current Cooling (Amperage) 12
CEER 11.8
Noise Level dB(A) (L/H) 55/59
Airflow CFM (H/L) 411/358
Dehumidifying Capacity 73.9 Pints per day
Product Dimensions (W” x H” x D”) 23.625” x 17.75” x 25.375”
Package Dimensions (W” x H” x D”) 26.125” x 20” x 30.5”
Net/Gross Weight (Lbs) 110/121
Refrigerant Type R-410A
Plug Type NEMA 5-15P
Model WS2-18E-201 WS2-24E-201
Power Supply (Ph/V/Hz) 1/230/60 1/230/60
Rated Cooling Capacity (BTU/h) 18,300 24,000
Cooling Power Input (Watts) 1,530 2,330
Rated Current Cooling (Amperage) 6.7 10.3
CEER 11.8 10.3
Noise Level dB(A) (L/H) 56/61 56/61
Airflow CFM (H/L) 430/370 447/388
Dehumidifying Capacity 82.8 Pints per day 152.4 Pints per day
Product Dimensions (W” x H” x D") 26.375” x 18.625” x 26.625” 26.375” x 18.625” x 26.625”
Package Dimensions (W” x H” x D”) 29.5” x 20.875” X 31.125” 29.5” x 20.875” X 31.125”
Net/Gross Weight (Lbs) 132.27/154.32 141.1/163.1
Refrigerant Type R-410A R-410A
Plug Type NEMA 6-15P NEMA 6-20P

ELECTRICAL SAFETY
DISCLAIMER
ALL INFORMATION AND THE TECHNICAL SPECIFICATIONS PRESENTED IN THIS USER’S MANUAL ARE THE
PRESENATION OF THE MANUFACTURER. SOLEUS N.A. HAS NOT CONDUCTED AN INDEPENDENT TEST TO
VERIFY THE INFORMATION AND SPECIFICATIONS PRESENTED HEREWITHIN.

INSTALLATION
Window Preparation
Please read all instructions prior to installing your air conditioner. Two people are recommended to install this product. If a new
electrical outlet is required, have the outlet installed by a qualified electrician before installing the unit.
Before installing the unit, check the dimensions of your window to make sure the air conditioner will fit. This unit is made to fit
inside a standard double-hung window. Make sure the window is in good shape and able to firmly hold the provided screws. If
not, make repairs prior to installing the unit.
Storm Window Requirements
A storm window frame will not allow the air conditioner to tilt properly which will keep it from draining properly. To ad-
just for this, attach a board or piece of wood to the sill. The board or wood piece should have a depth of at least 1 1/2”.
Make sure the board or piece of wood is approximately 1/2” higher than the storm window frame. This will allow the air
conditioner to tilt enough for proper drainage (See FIG. 2).
Prior to Installing the Air Conditioner
1. Check for anything that could block airflow. Check the area outside of the window for things such as shrubs, trees,
or awnings. Check the inside area to make sure curtains, drapes, or blinds will not prevent proper airflow.
2. Check the available electrical outlet. The power supply must be the same as shown on the unit serial nameplate
(located on the left side of the unit, near the front faceplate). Be sure the outlet is close enough for the power cord to
reach.
3. Carefully unpack the air conditioner. Remove all packing material and make sure the floor is protected when remov-
ing. Due to the large size of this air conditioner, two people should move the unit together.
When handling the unit, be careful to avoid cuts from the
sharp metal edges and aluminum fins on the front and rear
coils.
Model WS2-15E-201 WS2-18E-201 / WS2-24E-201
Unit Height 17 3/4" 18 5/8"
Unit Width 23 5/8" 26 3/8"
Min. Window Opening (See FIG 1) 18 3/4" 19 7/8"
Min. Window Width 28 1/8" 30"
Max Window Width 41 3/4" 50 "
18 3/4", / 19 7/8"MIN
18 3/4" / 19 7/8"MIN
FIG.2
FIG.1

.
INSTALLATION & ASSEMBLY INSTRUCTIONS - WINDOW MOUNTING
REMOVE CHASSIS
1. Pull down the front panel and remove the filter (See Fig. 3).
2. Lift the front panel upwards to remove and place to the side.
3. Locate the four faceplate screws and remove. These screws will need to be re-installed prior to mounting the air condi-
tioner (See Fig. 4).
4. After removing the screws, gently pull away the faceplate from the air conditioner cabinet. Remove the ground screw and
save for reinstallation later (See Fig. 5 & 6).
5. Remove the two screws from top of the unit (See Fig. 7). Hold the cabinet while pulling on the base handle, and care-
fully remove the unit.
INSTALLATION

INSTALLATION
Curtain
Curtain Installation
3. Fasten the curtains to the unit with short screws (Fig.10).
Weather Insulation Board Installation
NOTE: The Weather Insulation Board adds an extra layer
of insulation to keep air from passing through the sides of
the window air conditioner.
1. Using a sharp blade or scissors, slowly cut the
Weather Insulation Board to a size that will fit inside
of the side curtain rails and completely cover the cur-
tain.
2. Once properly sized, remove the backing to expose
the adhesive tape.
3. Place the Weather Insulation Board over the left cur-
tain and firmly press and hold for 5 seconds.
4. Repeat above steps to install the Weather Insulation
Board on right curtain (Fig.11).
Fig. 8
Curtain
Fig. 9
Fig. 10
Fig. 11
Weather Insulation Boards
Fig. 12
Long Screw
Place the Cabinet Inside the Window
1. Set the cabinet in the window so that is centered.
Place the unit so that front edge of the bottom rail
is against the back edge of the sill.
2. Bring the window down so that the front edge of
the top rail is in front of the window. Be sure the
unit is tilting slightly to the outside.
3. Fasten cabinet to window sill using three long
screws. Pre-drill holes if needed. Add the bottom
rail seal over the screws (Fig. 12).
Window
Frame
Top Rail
Bottom Rail
1/4”
1. Attach the top mounting rail to
the unit with short screws (Fig.8).
2. Slide the free end of the curtain into the side panel of the
air conditioner. Do this for each side. The flange for securing
the curtain into the window sill will be facing the room side
when installed (Fig.9).
Top Mounting
Rail
Bottom Rail Seal

.
INSTALLATION
Install Support Brackets
1. Hold each support bracket flush against the outside of
the window sill. Tighten each bracket to the bottom of
the cabinet as shown below. Mark the brackets at top
lever of the window sill and then remove.
2. Assemble the sill angle brackets to the support brackets
at the marked position as shown above. Hand tighten,
but not all the way for any changes that may need to be
made later during installation.
3. Install the support brackets (with sill angle brackets
attached) to the bottom of the cabinet as shown below.
4. Tighten all 6 bolts securely.
Screw &
Locknuts
Install the Window Lock and Sash Seal
1. Trim the sash seal to fit the width of the window. Insert
the sash seal into space between the upper and lower
sashes.
2. Attach the right angle safety lock as shown below.