Soleus Air KY-32E User manual

12,000 BTU
Evaporative Portable
Air Conditioner
Owner's Manual
Model # KY-32E
_®
US
Please read owner's manual carefully before operating the unit.

TABLE OF CONTENTS PAGE
Table of Contents ................................................................................................. 2
Introduction ........................................................................................................... 3
Important Safeguards ............................................................................................ 4
LCDI Power Cord and Plug ..................................................................................... 5
Package Contents ................................................................................................. 6
Parts Diagram ...................................................................................................... 6
Assembly Requirements .......................................................................................... 8
Control Panel and LCD Screen ................................................................................. 9
Operation Using the Control Panel ................................................................................ 11
Operation Using the Remote Controller ......................................................................... 12
Optional Water Drainage ......................................................................................... 14
Proper Care and Maintenance ......................................................................................
Troubleshooting ......................................................................................................... 16
Technical Specifications .......................................................................................... 17
Contact Int\_rlnation ............................................................................................ 17
Warranty ............................................................................................................ 18

INTRODUCTION
Thank you t\_rpurchasing the Soleus Air KY-32E 12000 BTU Portable Evaporative Air Conditioner. This unit is
designed to ilnprove living and working coln*\_rtby providing cooling, dehumidifying and fan functions with
minimal installation.
This lnulti-functional portable air conditioner operates as an air conditioner, dehumidifier, and fan. Unlike
traditional portable air conditioners, there is no bucket to empty. The condensate water is evaporated and removed
through the exhaust duct along with warm exhaust air. At 12000 BTUs the KY-32E is one of the most powerful
portable air conditioners on the market. In addition, the high speed lnotor allows t\_roperation in high temperatures
Soleus Air "Smart Chip" technology and precise control of the unit
When operating as an air conditioner, this unit is designed for spot cooling or cooling a room no larger than 450
square feet with a standard eight t\_ot ceiling height. Please read these instructions carefully before operating this
appliance. When using this air conditioner, always exercise basic safety precautions.
This easy-to-use manual wilt gnide you in obtaining the best use of your Portable Air Conditioner.
Please complete the following information for future reference. You will need it to obtain wananty service.
Model Number: KY-32E
Serial Number *"
Date of Purchase:
Place of Purchase:
*The Serial number is located on the back of the unit. Retain this Owner's Manual with your sales receipt as a
perlnanent record of your purchase.
Customer Service:
1-888-876-5387
9451 Telstar Avenue
E1Monte, California 91731
www.soleusair.com

IMPORTANT SAFEGUARDS
Before installing and using the portable air conditioner, please read this Owner's manual carefully.
1. Never use or store gasoline or other flammable vapor or liquid near this unit.
2. Maintain at least 20" (50cm) clearance space around all side of the unit. Do not obstruct air inlet or outlet
grilles.
3. All in-home wiring must comply with local and national codes and be installed by a qualified technician.
All wiring probtelns should be resolved by a qualified technician BEFORE installation and use of this air
conditioner.
4. The power supply must be properly _ounded.
5. For your safety, this unit is _ounded through the power cord plug when connected to a matching wall
outlet. Do not use an adapter plug or extension cord.
6. When relnoving the power cord fioln the wall outlet, always grasp the plug firmly and pull straight froln
the outlet. Never unplug the air conditioner by pulling on the cord itself.
7. Always inspect the power cord and ptug t\_rsigns of dalnage be*\_reuse.
8. Repair or replace ilrnnediately, all power cords that have become fiayed or otherwise damaged. Do not use
a cord that shows cracks or abrasion damage along its length, the plug or the connector end.
9. Do not use the unit in the imlnediate surroundings of a bath, a shower or a swilnlning pool. Never ilnlnerse
the unit in water or any other liquid.
10. Keep out of reach of children.
11. Use product only as directed in this manual; unintended use may void the warranty.
NOTE: If for any reason this product requires selaTice,we strongly recommend that a certified
technician perform the service. 4

LCDI POWER CORD AND PLUG
This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and plug as
required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord with no
termination on the load side and a LCDI attachment plug on the line side.
The LCDI power cord and plug will remove the supply source via electrical disconnect (circuit trip) if the nominal
current leakage between the cord shield and either load conductor exceeds a predetermined value. The cord will
remain de-energized until the devise has been manually reset. This is intended to reduce the risk of a fire in the
power cord or combustible materials nearby. The cord shields are not grounded and they must be considered a shock
hazards if exposed. The cord shield must not be connected to ground or to aW exposed metal.
The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly. To test:
1. Plug power cord into wall outlet
2. Press TEST Button, circuit should trip, cutting power to the air conditioner
3. Press RESET button for use
Ifa test is pert\_rmed and the indicator light remains ON, current leakage has been detected. Do not use the air
conditioner or attempt to reset the LCDI Plug. Contact Soleus Air Customer Service for troubleshooting
recommendations.
RESET
FRONT BACK
WARNING:
1. DO NOT press TEST button while the air conditioner is operating.
2. The TEST and RESET buttons should not be used as "ON" and "OFF" switches.
3. The cord and plug are not intended to offer protection to externally connected loads or supply circuits.
4. The cord and plug are intended for indoor use only.

PACKAGE CONTENTS
1. Portable Air Conditioner
2. Air Exhaust Duct
3. Exhaust Duct Window Kit Adapter
4. Remote Control
5. AAA Batteries (2)
6. Window Kit - 3 Sliding Panels
7. Window Kit Fastener Screws (4)
8. Continuous Drainage Tube
9. Exhaust Outlet Walt Cover
10. User's Manual
PARTS DIAGRAM
FRONT VIEW
Control Panel
Upper Air Outlet
Signal Receptor
Handle
Lower Air Inlet Grille

REAR VIEW
Exhaust Duct
Terminal Upper Air Inlet
Grille with Filter
Power Cord
Hot Air Exhaust
Outlet
Lower Air Inlet
Grille
WINDOW KIT EXHAUST DUCT
Window Kit

ASSEMBLY REQUIREMENTS
EXHAUST DUCT
When you use the unit as an air conditioner, the hot exhaust air and evaporated condensate water must be vented out
of the room. The exhaust duct and venting kit serves this purpose.
NOTE: The exhaust duct and venting kit should not be used while the unit is operated in dehumidification,
or tan mode. DO NOT INSTALL EXHAUST DUCT WHILE UNIT IS 1N OPERATION.
a) Slide "Unit Terminal End" of the exhaust
connector completely over the "Hot Air
Outlet Grill" on the rear of the unit.
Plastic grooves are located on the hot air
outlet help to guide the exhaust connector
into place.
/
/!
i. Window Kit Mounting: The exhaust
hose easily connects to the window kit
by snapping the hose adapter directly
onto the kit. See page 7 for
window/sliding door kit installation.
ii. Walt Mounting: Mount the external
end of the exhaust duct to a 5¼" hole
within the wall. Creating a hole into a
wall is a separate procedure that may
require professional installation.
NOTE: Correct Mounting is shown to the
right, The center height of the hole should
between 16"-50"

NOTE: In order to achieve maximum room cooling efficiency, the exhaust duct should remain as short and straight
as possible. To further shorten the exhaust hose, first unthread either exhaust duct adapter clockwise to remove it.
Then cut the hose to desired length. It is not recommended to increase the lnanufacturer's length of the exhaust
hose. This may reduce the cooling efficiency or damage the unit
WINDOW KIT INSTALLATION
a) Open window or sliding door approximately 5
inches (13 cm). Adjust the length of the window
kit to the same length of the window or sliding
door. Use two or three panels if necessary and
secure panels into place by t:astening the 3A"
Phillips head screws into the pre-drilted panel
holes.
b) Alternatively you may need to mark a single
panel and cut it down to properly fit the window
opening. The window kit (three panels) has a
maxilnum length 81 inches.
c) Place the window kit between the window and the
window tiame as shown in the picture to the
right. Close the window onto the window kit to
t\)nn a tight seal.
d) Attach the exhaust duct window kit adapter to the
window kit. Tabs located on the adapter will lock
into place securing the adapter to the window kit.
Hodzonlal Window
i /
i! ,i/i
)...................................... .>
NOTE: Using the window kit wilt cause the window not to be properly closed and locked. Consider taking
additional security measurements.
CONTROLPANELANDLCDSCREEN
F@!] boeed Dutto!_
Power on/off button
Mode button LCD wit _mw
t 1/0 MODE ,_ TEMF :.(9: >.

CONTROL PANEL FUNCTIONS
1. Power On/Off Control
Starts or stops the unit.
2. Temperature Setting Control
Select the desired temperature setting by pressing either the • • buttons. It is recommended to set the
temperature bel\_re selecting the Mode Control.
3. Mode Control
Select the functions of the unit t\_r:
Air Conditioning Mode
D h idii_i gM d
e um n o e
Fan Mode _
Auto Mode _-_
4. Fan Speed Control
Select the tan speed for:
Low
Medimn
High
5. Timer Function
Set timer to start or stop the unit.
When the unit is On, press "Timer" Button repeatedly until the desired number of hours is
displayed in the lower right comer of the display window. The unit will automatically power Off
once the selected number of hours has elapsed.
When the unit is Oft; press "Tilner" Button repeatedly until the desired number of hours is
displayed in the lower right corner of the display window. The unit will automatically power On
once the selected number of hours has elapsed.
NOTE: The timer function must be manually reset before each automatic start or stop.
6. Sleep Function
The sleep function is designed to automatically adjust the temperature upwards according to the amount
of time elapsed (adjustable from 0.5 to 7.0 hours). This saves power while still keeping the room
temperature at a coln*\_rtable level.
10