Sonoscape S2 User manual

EXAM：A frequently used key；
Press this key, you will return to the
transducer selection interface,
where you can select transducer
and exam mode.
S2 Panel Operation
The following demonstration only gives a very basic introduction to ultrasound
exam in S2: functional keys, preparation before starting an exam, and data saving
after exam. The content is only a general introduction, and therefore it should not be
used as an operation manual for S2 or any particular ultrasound system.
Keyboard:
1. Input patient information
2. Input annotations or comments
Save: Press this key to save
the current image/clip.
one key save function: short
time press to save image,
longer time press to save
cine.
FREEZE：Press “FREEZE” to stop the
current image/clip, you can take
measurement after freezing an image.
NOTICE: FREEZE only temporarily save the
image, if you press “FREEZE” again, the
system will activate the exam again and
the image/clip will disappear. If you want
to save image permanently, press “SAVE”

PATIENT：Press this key you
enter the patient manage page,
you can create new patient file
and review history patient file
Track Ball: Track Ball moves the cursor
just like a computer mouse, but you can
also use it to:
1. Set calipers when taking measurement
2. After you pressed “FREEZE”, move the
trackball to review a clip
SET: SET is a confirmation key.
When you have selected an exam
mode or a measurement item with
your trackball, press “SET” to
confirm entering the exam or
activate the selected item
Report:
Press this key to make a
report

GAIN：
Adjust B-mode,
M-mode Gain
D GAIN (Doppler Gain)：
Adjust Gain for Color-Flow Mode,
TDI mode, and PW, CW mode
TGC(Time Gain Compensation)：Adjust
the gain level of a certain depth
ZOOM:
Enlarge image

Adjustment Switches:
This row of toggle switches adjust several
frequently used parameters: depth, focus
position, PRF, baseline and steer
Imaging Modes:
All the imaging mode keys are in this
area, such as M-mode, CFM, PW, etc.
Press a button once to activate this
mode, press again to quit.

Video Print and Print
Press this button to print the
current screen on the video
printer, or to print pdf report
Measurements：
Take calipers (distance), trace areas,
perimeter (ellipse) and other
measurements, measurement keys
should be used with the aid of Trackball

Audio: two functions
1. Adjust the volume in PW mode
2. Rotate this knob to select items
in menu after “MENU”is pressed.
MENU: two functions
1. In probe selection interface, press MENU
to enter system settings,
2. During scanning, press MENU to adjust
image parameters(use “AUDIO”to select
items) such as frequency, dynamic range,
and gray scale etc.. The knob can be turned
to adjust the value of each parameter.
Angle: two functions
1. Adjust the angle of arrow/mark/sample
line etc.
2. Select images in clipboard
Space:
Open/close clipboard