Sony Xperia ZL User manual

1271-7743 Rev 1

Sony Mobile Communications AB – Company Internal
Go/No Go Test
- electrical -
XperiaTMZL
C6502, C6503, C6506 & L35h

Test and Calibration (elec)
1271-7743 Rev 1

Sony Mobile Communications AB – Company Internal
2(10)
CONTENTS
1Go/No Go Testing...........................................................................3
1.1 Antenna Coupler C6502 and L35h no LTE .........................................3
1.2 Antenna Coupler C6503 and C6506 all bands....................................3
1.3 Direct Line ............................................................................................4
1.4 Attenuation Factors .............................................................................6
1.4.1 Loss Values – Antenna Coupler CMU-Z11 ................................................6
1.4.2 Loss Values – Antenna Coupler CMW-Z11................................................7
1.4.3 Loss Values – Direct Line ...........................................................................9
2Revision History...........................................................................10
C6502 and L35h no LTE is ONLY implemented in SERPII.
C6503 and C6506 all bands is ONLY implemented in CMWrun

Test and Calibration (elec)
1271-7743 Rev 1

Sony Mobile Communications AB – Company Internal
3(10)
1 Go/No Go Testing
This Go/No Go testing has to be carried out in two ways, with an:
•Antenna Coupler.
•Cable in shield box.
For more information on Antenna Coupler and Cable in shield box testing, refer to
1220-1336: Generic Repair Manual – electrical, section ‘Setup Go/NoGo Test’!
For part no’s on the equipment below, refer to the ‘Tools Catalogue/Matrix’!
1.1
Antenna Coupler C6502 and
L35h no LTE
The following equipment has to be used:
•Rohde & Schwartz RF Shield Package
- Rohde & Schwartz RF Shield Box CMU-Z11
- Rohde & Schwartz RF Coupler
- Grid Positioning Holder
•RF Test Cable Flexible 1M
•RF Adapter for RF Shield Box
•Micro USIM Card, instrument specific
GSM-850/900/1800/1900
WCDMA-850/900/1700/1900/2100
Put the grid positioning holder with its reference point in
position F12 and place the phone as shown in the adjacent
picture.
A FEDB C G H I NMLJ K O P Q R
25
15
16
17
18
19
20
21
22
23
24
14
4
5
6
7
8
9
10
11
12
13
1
2
3
A FEDB C G H I NMLJ K O P Q R
25
15
16
17
18
19
20
21
22
23
24
14
4
5
6
7
8
9
10
11
12
13
1
2
3
1.2
Antenna Coupler C6503 and
C6506 all bands
The following equipment has to be used:
•Rohde & Schwartz RF Shield Package
- Rohde & Schwartz RF Shield Box CMW-Z10
- Rohde & Schwartz RF Coupler CMW-Z11
- Grid Positioning Holder
•RF Test Cable Flexible 1M
•RF Adapter for RF Shield Box
•Micro USIM Card, instrument specific
GSM-850/900/1800/1900
WCDMA-850/900/1700/1900/2100
LTE-Band 1/2/3/4/5/7/8/17/20
Put the grid positioning holder with its reference point in
position J16 and place the phone as shown in the adjacent
picture.

Test and Calibration (elec)
1271-7743 Rev 1

Sony Mobile Communications AB – Company Internal
4(10)
Go/NoGo Testing
1.3 Direct Line
The following equipment has to be used:
•RF Test Cable Flexible 1M
•RF Probe
•Micro USIM Card, instrument specific.
Connect the RF Probe as shown in the adjacent picture.
To get access to the RF connector on the PBA, refer to
1271-7733: C65 Mechanical Working Instructions,
Chapter 3.1!

Test and Calibration (elec)
1271-7743 Rev 1

Sony Mobile Communications AB – Company Internal
5(10)
Go/NoGo Testing
Follow the directions stated in ‘Go/NoGo Test Script Parameters’ to be found in
1220-1336: Generic Repair Manual – electrical, together with the ‘Attenuation Factors’ below!
This phone is available in four versions, C6502, C6503, C6506 and L35h, including the following bands:
C6502 and L35h:
GSM-850/900/1800/1900
WCDMA-850/900 /1700 /1900 /2100
C6503:
GSM-850/900/1800/1900
WCDMA-850/900/2100
LTE-Band 1/3/5/7/8/20
C6506:
GSM-850/900/1800/1900
WCDMA-850/900 /1700 /1900 /2100
LTE-Band 1/2/4/5/17

Test and Calibration (elec)
1271-7743 Rev 1

Sony Mobile Communications AB – Company Internal
6(10)
Go/NoGo Testing
1.4 Attenuation Factors
The attenuation values listed below in 1.3.1 and 1.3.2 is valid only when the equipment listed on
the previous pages is being used!
1.4.1 Loss Values – Antenna Coupler CMU-Z11
Attenuation
C6502 and L35h
Band
Channel
Rx
Tx
GSM 850 Low
7.00
12.14
Mid
7.00
9.79
High
7.00
10.44
GSM 900 Low
4.50
7.42
Mid
4.50
5.24
High
4.50
3.06
GSM 1800 Low
8.00
15.61
Mid
8.00
14.10
High
8.00
13.44
GSM 1900 Low
10.00
8.40
Mid
10.00
9.81
High
10.00
10.40
WCDMA 850 Low
7.50
8.01
Mid
8.00
7.93
High
8.50
7.53
WCDMA 900 Low
9.00
6.61
Mid
9.50
6.42
High
9.00
6.71
WCDMA 1700 Low
12.50
12.90
Mid
11.50
13.20
High
12.00
12.94
WCDMA 1900 Low
7.00
9.94
Mid
8.00
7.91
High
8.50
7.65
WCDMA 2100 Low
6.00
7.36
Mid
6.50
8.39
High
6.00
8.99

Test and Calibration (elec)
1271-7743 Rev 1

Sony Mobile Communications AB – Company Internal
7(10)
1.4.2 Loss Values – Antenna Coupler CMW-Z11
Attenuation
Attenuation
C6503
C6506
Band
Channel
Rx
Tx
Rx
Tx
GSM 850 Low 9.00 8.36 10.00 6.94
Mid 9.00 9.26 10.00 8.67
High 10.00 10.15 10.50 9.85
GSM 900 Low 12.00 8.10 14.00 10.09
Mid 16.00 9.29 16.00 9.66
High
19.00
10.88
24.50
9.15
GSM 1800 Low 10.00 11.97 9.50 12.45
Mid 9.00 10.35 9.50 9.59
High 9.00 10.40 10.50 9.94
GSM 1900 Low 11.00 10.09 11.00 10.50
Mid
13.00
10.21
10.50
11.42
High 12.00 12.50 10.00 12.75
WCDMA 850 Low 10.00 5.76 12.00 7.00
Mid 10.00 6.74 12.50 7.45
High 11.00 7.48 12.50 8.53
WCDMA 900 Low 14.00 6.70 18.00 9.72
Mid 18.00 8.04 19.50 10.17
High 18.00 8.89 24.00 12.19
WCDMA 1700 Low 14.00 9.90
Mid 14.00 9.00
High 13.00 8.85
WCDMA 1900 Low 13.00 9.88
Mid 14.00 9.73
High 14.00 10.22
WCDMA 2100 Low 15.00 9.25 13.50 10.00
Mid 14.00 9.67 13.00 11.50
High 14.00 10.91 13.50 11.05
LTE BAND 1 Low 13.00 11.85 12.00 12.2
Mid 12.00 12.03 11.00 13.5
High 11.00 13.29 11.00 12.65
LTE BAND 2 Low 11.00 10.95
Mid 12.00 11.25
High
12.00
12.05

Test and Calibration (elec)
1271-7743 Rev 1

Sony Mobile Communications AB – Company Internal
8(10)
LTE BAND 3 Low 9.00 12.44
Mid 9.00 11.35
High 9.00 11.30
LTE BAND 4 Low 12.00 12.35
Mid 12.00 11.6
High 11.00 11.56
LTE BAND 5 Low 8.00 8.33 11.00 9.58
Mid 8.00 9.05 11.00 10.4
High 8.00 9.53 11.00 11.3
LTE BAND 7 Low 15.00 15.43
Mid 17.50 17.27
High 16.00 18.57
LTE BAND 8 Low 11.00 9.13
Mid 15.00 10.20
High 18.00 11.27
LTE BAND 17 Low 5.00 6.45
Mid 5.00 6.26
High 5.00 6.27
LTE BAND 20 Low 6.00 9.14
Mid 6.00 10.14
High 6.50 10.27

Test and Calibration (elec)
1271-7743 Rev 1

Sony Mobile Communications AB – Company Internal
9(10)
Go/NoGo Testing: Attenuation Factors
1.4.3 Loss Values – Direct Line
Attenuation
Band
Channel
Rx
Tx
GSM 850 All 1.0 1.0
GSM 900 All 1.0 1.0
GSM 1800 All 2.3 2.3
GSM 1900 All 2.3 2.3
WCDMA 850 All 2.5 2.5
WCDMA 900 All 2.5 2.5
WCDMA 1700 All 1.3 1.3
WCDMA 1900 All 1.3 1.3
WCDMA 2100 All 1.3 1.3

Test and Calibration (elec)
1271-7743 Rev 1

Sony Mobile Communications AB – Company Internal
10(10)
2 Revision History
Rev.
Date
Changes / Comments
1 2013-Feb-28 Initial release