Sony DR-PQ7iP/VLT User manual

Specications
1. Works with iPad®, iPhone 3GS, iPhone 4, iPod classic® 120GB & 160 GB (2009), iPod
nano® 4th, 5th & 6th generation, iPod shue® 3rd & 4th generation, and iPod touch® 2nd,
3rd & 4th generation.
© 2011 Sony Electronics, Inc. All rights reserved. Reproduction in whole or in part without
written permission is prohibited. Sony and PIIQ are trademarks of Sony. iPad, iPod, and
iPhone are registered trademarks of Apple Inc. All other trademarks are trademarks of
their respective owners. Features and specications are subject to change without notice.
/Updated: April 5, 2012
Audio
Driver Unit 9 mm, dome type (CCAW adopted)
Frequency Response 8 – 22,000 Hz
Impedance 16 ohms at 1 kHz
Sensitivity (db) 100 dB/mW
Volume Control Yes
Audio Features
Ear Cups Closed, Dynamic
Convenience
Remote Control Functions Volume, FF, RW, Play, Pause, Mic
General
Design In-the-ear
Headband None
Magnet Neodymium
Plug Four-conductor gold-plated stereo mini plug for iPod with remote function
Type of Use Portable
Hardware
Cord 1.2 m (47 1/4 in), Litz cord Y-Type
Power
Power Handling Capacity 100 mW
Weights and Measurements
Cord Length (Approx.) 47 1/4 in. (1.2 m), Litz cord Y-type
Weight (Approx.) 0.11 oz. (3 g) without cord
Accessories
Supplied Accessories Earbuds - S (2), M (2), L (2)
Operating Instructions (1)
DR-PQ7IP/VLT PIIQ Earbuds for iPod®/iPhone®