Sony Rm-vz220 User manual

4-170-642-22(1)

Remote Commander

RM-VZ220

Operating Instructions

Mode d’emploi (au verso)

English

For the Customers in the U.S.A.

WARNING

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.



Consult the dealer or an experienced radio/TV technician for help.

You are cautioned that any changes or modifications not expressly approved in this

manual could void your authority to operate this equipment.

For customers in Canada

This Class B digital apparatus complies with Canadian ICES-003.

Setting Up the RM-VZ220

The RM-VZ220 is preset at the factory to operate Sony brand video devices

set to any of the Device Select buttons (see the table below).

To use with non-Sony devices, or Sony devices that are not preset at the

factory, set the manufacturer’s code for each device.

Devices Button Factory setting*

TV TV Sony TV (00810)

TV, Cable set top box, Satellite

receiver, IPTV, DVD player, DVD

recorder, Blu-ray Disc player, DVR

(digital video recorder), PVR

(personal video recorder), VCR,

DVD Home Theater

CBL (SAT) Cable set top box (non-

Sony) (51376)

VCR Sony VCR (60032)

DVD Sony DVD player

(11033)

*The five-digit code is the preset manufacturer’s code.

Note

Only a TV can be assigned to the TV Device Select button. You can assign any device to

the other Device Select buttons.

Installing the batteries

Slide open the battery compartment and insert two size AA (R6) dry

batteries (not supplied).

Insert the batteries (negative end first) through the guide clamp within each

compartment as shown below.

1 2

Battery life

Under normal conditions, size AA (LR6) alkaline batteries will last up to one

year. If the RM-VZ220 does not operate properly, the batteries might be

drained. Replace both batteries with new ones.

Notes



Replace the batteries within 2 minutes after removing them, and do not press any

button when replacing the batteries. Otherwise, your code settings may be cleared.



Do not use an old battery with a new one, or mix different types of batteries together.



If the electrolyte inside the battery should leak, wipe the contaminated area of the

battery compartment with a cloth and replace the old batteries with new ones. To

prevent electrolyte from leaking, remove the batteries when you plan not to use the

RM-VZ220 for a long period of time.

Specifications

Operating distance Approx. 11 m (36 ft) (varies depending on devices of

different manufacturers)

Power requirements Two size AA (R6) dry batteries (not supplied)

Battery life Approx. 1 year when using size AA (LR6) alkaline batteries

(varies depending on frequency of button use - up to approx.

300 times per day.)

Dimensions Approx. 53 × 213 × 27 mm (2 1/8× 8 1/2× 1 1/8in.)

(w/h/d)

Mass Approx. 100 g (3.5 oz) (not including batteries)

Design and specifications are subject to change without notice.

Troubleshooting

If you have problems setting up or using the RM-VZ220:



Carefully perform the setup procedure of “Startup Guide.” If the RM-VZ220 does not

work, try repeating the setup procedure using another manufacturer’s code (if listed

for your device). If you still cannot operate the RM-VZ220, try the Search function

(see “Searching for the correct code”).



Aim the RM-VZ220 directly at the device.



Remove any obstacles in the path between the RM-VZ220 and the device.



Make sure you have pressed the correct Device Select button.



Check that the device has infrared remote capability. For example, if your device did

not come with a remote control, it probably is not capable of being controlled by the

RM-VZ220.



The batteries are weak, or not inserted correctly. Replace them with new ones or insert

them correctly.

Startup Guide This guide shows you how to set up and use the RM-VZ220 to operate your devices.

If your Sony device has already been preset, see“Operate the device.”

Set the manufacturer’s code

Example: To set up a Philips TV

1 Find the manufacturer’s code in “Manufacturer’s Code List.”

RM-VZ220_CA [US,FR] 4-170-642-22(1)RM-VZ220_CA [US,FR] 4-170-642-22(1)

4-170-642-22(1)

Remote Commander

RM-VZ220

Operating Instructions

Mode d’emploi (au verso)

English

For the Customers in the U.S.A.

WARNING

This equipmenthas been tested and found to comply with the limits for a Class B digital

device, pursuantto Part 15 of the FCC Rules. Theselimits are designed to provide

reasonableprotection against harmful interference in a residential installation. This

equipmentgenerates, uses and can radiate radio frequency energy and, if not installed

andused in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee thatinterference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

televisionreception, which can be determined by turning the equipment off and on, the

user is encouragedto tr y to correct the interferenceby one or more of the following

measures:

ˎReorientor relocate the receiving antenna.

ˎIncreasethe separation between the equipment and receiver.

ˎConnect the equipmentinto an outlet on a circuit different from that to which the

receiveris connected.

ˎConsultthe dealer or an experienced radio/T V technicianfor help.

Youare cautioned that anychanges or modifications not expressly approved in this

manualcould void your authority to operate this equipment.

For customers in Canada

This Class B digitalapparatus complies with Canadian ICES-003.

Setting Up the RM-VZ220

The RM-VZ220 is preset att hefac tory to operateSony brand video devices

set to any ofthe De vice Select buttons(see the table below).

Touse with non-Sony devices, or Sony devices that are not preset at the

factory,set the manufacturer’s code for each device.

Devices Button Factory setting*

TV TV Sony TV (00810)

TV,Cable set top box, Satellite

receiver,IPTV, DVD player,DVD

recorder,Blu-ray Disc player, DVR

(digital video recorder),PVR

(personal video recorder),VCR,

DVD HomeTheater

CBL (SAT) Cable set top box (non-

Sony) (51376)

VCR Sony VCR(60032)

DVD Sony DVDplayer

(11033)

*The five-digitcode is t hepreset manufacturer’s code.

Note

Onlya T V can be assigned to the TV Device Select button. Youcan assign any device to

the otherD evice Select buttons.

Installing the batteries

Slide open the battery compartmentand insert two size AA (R6) dry

batteries (notsupplied).

Insert the batteries(negative end first) through the guide clamp within each

compartmentas shown below.

1 2

Battery life

Undernormal conditions, size AA (LR6) alkaline batteries will last up to one

year.If the RM-VZ220 does not operate properly, the batteries mightb e

drained. Replace both batterieswith new ones.

Notes

ˎReplacet he batterieswithin 2 minutes after removing them, and do not press any

buttonwhen replacing the batteries. Otherwise, your code settings may be cleared.

ˎDo notus e anold battery with a new one, or mix different types of batteries together.

ˎIfthe electrolyte inside the battery should leak, wipe the contaminated area of the

batterycompartment with a cloth and replace the old batteries with new ones. To

preventelectrolyte from leaking, remove the batteries when you plan not to use the

RM-VZ220 fora long period of time.

Specifications

Operatingdistance Approx. 11 m (36 ft) (varies depending on devices of

differentmanufacturers)

Powerrequirements Twosize AA (R6) dry batteries (not supplied)

Batterylife Approx.1 year when using size AA (LR6) alkaline batteries

(variesdep ending onfrequency of button use - up to approx.

300 times per day.)

Dimensions Approx.53 × 213 × 27 mm (2 1/8× 8 1/2× 1 1/8in.)

(w/h/d)

Mass Approx.100 g (3.5 oz) (not including batteries)

Design andsp ecificationsare subject to change without notice.

Troubleshooting

Ifyou have problems setting up or using the RM-VZ220:

ˎCarefullyp erformthe s etupprocedure of “Startup Guide.”If the RM-VZ220 does not

work,tr y repeatingthe s etupprocedure using another manufacturer’scode (if listed

foryour device). If you still cannot operate the RM-VZ220, try the Search function

(see “Searchingfor the correct code”).

ˎAim the RM-VZ220 directly atthe device.

ˎRemoveany obstacles in the path between the RM-VZ220 and the device.

ˎMakesure you have pressed the correct Device Select button.

ˎCheckt hatthe device has inf raredremote capability. For example,if your device did

notcome with a remote control, it probably is not capable of being controlledby the

RM-VZ220.

ˎThe batteriesare weak, or not inserted correctly. Replace them with new ones or insert

them correctly.

Startup Guide This guide showsyou how to set up and use the RM-VZ220 to operate your devices.

If your Sonydevice has already been preset, see “Operate the device.”

Set the manufacturer’s code

Example: Toset up a Philips TV

1Find the manufacturer’scode in “Manufacturer’s Code List.”

Manufacturer’sCodeList/

Listedescodesd’appareil par fabricant

English

Thefollowingtablesshowbrandnames (Brand) and their corresponding

codenumbers(CodeNo.).

1PressandholdSETformore than 3 seconds.

TheSETindicatorlightsup.

WhilekeepingSEThelddown,press the desired Device Select button,

thenreleasebothbuttons.

2Enterthemanufacturer’scode.

TheSETindicatorflashesthreetimes and turns off.

Français

Letableauci-dessousindiquedesmarques (Brand) et les codes

correspondants(CodeNo.).

1MaintenezlatoucheSETenfoncéependant plus de 3 secondes.

L’indicateurSETs’allume.

ToutenmaintenantlatoucheSET enfoncée,appuyez sur la touche de

sélectiond’appareilsouhaitée,puisrelâchezles deux touches.

2Saisissezlecoded’appareildufabricant.

L’indicateurSETclignote3fois,puiss’éteint.

TV/Téléviseur

Brand Code No.

Sony 11633,10533,10864, 11033,

11070,11431,11516

Accurian 10675

Akai 10695

Allegro 10869

ApexDigital 10672,11056

BelCantoDesign 11571

Broksonic 10695

CineVision 10869

Citizen 10695

CyberHome 11024

Daewoo 10869

Denon 10490,11634,12258

Disney 10675,11270

Emerson 10591,10675

Enterprise 10591

Funai 10675

GE 10522

GFM 10675

GoVideo 10744,10741, 10869, 11044,

11075

GoldStar 10741

Harman/Kardon11229

Hitachi 10573,10664

Hiteker 10672

Insignia 10675,12428,12596

Integra 11769,10627,12147

JVC 10623,10867, 11164

Kenwood 10490

LG 10591,10741,10869

Magnavox 10503,10539,10646,10675,

11354

Marantz 10539, 12414, 12432

Memorex 10695,11270,12213

Microsoft 10522,12083

Mitsubishi 11521

NAD 10741,12572

Olevia 12331

Brand Code No.

Onkyo 10503,11769,10627,11627,

12147

Oppo 10575,12545

Panasonic 10490,11579,11641

Philco 10675

Philips 10503,10539,12056,12084,

10646,10675,11267,11354,

12434

Pioneer 10142,10631,11571,12442

PolkAudio 10539

Presidian 10675

Proscan 10522

RCA 10522,11769,10822, 12213,

12587,12592,12594

Rio 10869

Rotel 10623

Samsung 10490,10573, 10199, 11044,

11075,12329,12489

Sansui 10695

Sanyo 10695

Sharp 10630,10675,12250

Shinsonic 10533

SonicBlue 10869

Sylvania 10675

Symphonic 10675

TCL 12587

Technics 10490

Tivo 11503

Toshiba 10503,11769,10695,11154,

11503,12006,12277

UrbanConcepts 10503

Viore 12553

Vizio 12563

Vtrek 12587

Xbox 10522,12083

Yamaha 10490,10539,10497,10817,

12298

Zenith 10503,10591,10741,10869

DVDplayer/LecteurDVD

Brand Code No.

Sony 11033,11070,11431

Accurian 10675

ApexDigital 11056

Funai 10675

GoVideo 10741

JVC 11164

LG 10741

Magnavox 10646,10675

Panasonic 10490,11579

Brand Code No.

Philips 10646

Pioneer 10631

RCA 10522

Samsung 10490

Sharp 10675

Sylvania 10675

Toshiba 12277

Zenith 10741

DVDrecorder/EnregistreurDVD

Brand Code No.

Sony 00810,00000

Acer 01339

Action 00650

Admiral 00463

Akai 00812,01675,00702, 02232

Akira 01733

AOC 01365,01589

ApexDigital 00748

Aventura 00171

Bell&Howell 00154

BPL 01543

Broksonic 00463

Carver 00054

Celebrity 00000

Coby 02306,02345,02348

Commercial

Solutions

01447

Crosley 00054

Curtis 02352

CurtisMathes 00054,00154, 00702, 01661

Daewoo 01661

DigitalLifestyles 01765

Durabrand 00463,00171

Dynex 01463,01810,02049

Electroband 00000

Electrograph 01755

Electrohome 00463

Elektra 01661

Element 01687

Emerson 01864,00154, 00463, 00171,

01661,01394

Emprex 01765

Envision 01365, 01589

ESA 00812,00171

Fisher 00154

Funai 00171

Gateway 01755, 01756

GE 01447,00051,02359

GFM 00171

Haier 01748,01749,02309,02449

Harman/Kardon00054

Hisense 00748,01314,02098

Hitachi 01643,02215,02433

iLo 01684

Infinity 00054

Insignia 01564,00171,02049

JBL 00054

JCB 00000

JVC 00731,01253, 01601, 01774

KDS 01687

Kolin 01331

LG 01423,02358

LXI 00054, 00154, 00156

MAG 01687

Magnavox 01454,01866,00054,01254,

01365,02372

Marantz 00054

Matsushita 00650

Maxent 01755

Memorex 00154,00463,00150

MGA 00150

Brand Code No.

Midland 00051

Mitsubishi 01250,00150,00836

NAD 00156

NEC 01797

NetTV 01755

Norcent 00748,01365,01589

Olevia 01610,01144,01331

Onida 01253,02396

Optimus 00154,00650

Orion 00463,01463

Panasonic 01480,00051,00650

PARK 02104

Penney 00156,00051

Petters 01523

Philco 00054

Philips 01454,00054,00690,01744,

02372

Pioneer 01457,01260

Polaroid 01523, 01276, 01314, 01687

Portland 01661

Prism 00051

Proscan 01447,02147,02256

Proview 01687

Quasar 00051,00650

RadioShack 00154

RCA 01447,01781,02187, 02247,

02403,02429,02434

Realistic 00154

Sampo 01755

Samsung 00812,00702

Sansui 00463

Sanyo 00154,01142

Sceptre 01360,01599

Scott 01711

Sears 00054,00154,00156,00171

Sharp 00818

Spectroniq 01687

Squareview 00171

Superscan 00864

Supreme 00000

SVA 00748

Sylvania 01864, 00054, 00171, 01314,

01394

Symphonic 00171

Syntax 01610,01144,01331

Tatung 01756

TCL 02403,02429

Technics 00051

Techwood 00051

Teknika 00054,00150

Telefunken 00702

Toshiba 01524,00154,00156,00650

TVS 00463

Venturer 01865

Videocon 01540,01541,02436

Vidikron 00054

Viewsonic 01755,00864,00885,01627,

01742

Viore 01684,02104,02352

Vizio 01758,00864,00885,01756

VU 02098

Brand Code No.

Wards 00054

Waycon 00156

Westinghouse 01712,00885,01577

White

Westinghouse

00463,01661

Wyse 01365

Zenith 00463,01661

Blu-rayDisc/HD-DVDplayer/

LecteurBlu-rayDisc/DVDHD

Brand Code No.

Sony 11516

Denon 12258

Insignia 10675,12428,12596

Integra 11769,12147

LG 10741

Magnavox 10675

Marantz 12414, 12432

Microsoft 12083

NAD 12572

Olevia 12331

Onkyo 11769,12147

Oppo 12545

Brand Code No.

Panasonic 11641

Philips 12084,12434

Pioneer 10142,12442

RCA 11769

Samsung 10199

Sharp 12250

Sylvania 10675

Toshiba 11769

Viore 12553

Vizio 12563

Xbox 12083

Yamaha 12298

TV / Téléviseur

Brand CodeNo.

Sony 00810,00000

Acer 01339

Action 00650

Brand CodeNo.

Midland 00051

Mitsubishi 01250,00150, 00836

NAD 00156

BPL 01543

Broksonic 00463

Carver 00054

Celebrity 00000

Coby 02306, 02345, 02348

Commercial

Solutions

01447

Crosley 00054

Curtis 02352

CurtisMathes 00054,00154, 00702, 01661

Daewoo 01661

DigitalLifestyles 01765

Durabrand 00463, 00171

Panasonic 01480, 00051, 00650

PARK 02104

Penney 00156,00051

Petters 01523

Philco 00054

Philips 01454, 00054, 00690, 01744,

02372

Pioneer 01457, 01260

Polaroid 01523,01276, 01314, 01687

Portland 01661

Prism 00051

Proscan 01447, 02147, 02256

Proview 01687

If yourdevice is not listed, try the Search function (see “Searching for the correct code”).

2Press and hold SET for morethan 3 seconds.

The SET indicatorlig htsup.

While keeping SET held down, press

the desired Device Select button,

then release both buttons.

3Enter the manufacturer’scode (01454).

The SET indicatorf lashes threetimes and

turns off.



Operate the device

1Aim the RM-VZ220 directly at the device.

2Press the DeviceSelec t button for the

device you want to operate.

3Press POWER to turn on the device.

4Press buttons on the RM-VZ220 tocheck that they func tion.

See “Remote ButtonDescriptions” for the functions of buttons for each device.

If the RM-VZ220does not seem to be working…

ˎCheck that youhave set the correct manufacturer’s code.

ˎTryrepeating the setup procedure using another manufacturer’scode (if listed for your device).

If youstill cannot operate the RM-VZ220 after trying all the listed codes, try the S earchfunction (see “Searching

for the correct code”).

Notes

ˎIfthe setting is incomplete,

the SET indicatorflashes once

andthe indicators turn off.

Startagain from the

beginning.

ˎIfno operations are

performed for10 seconds

while setting, the setting will

be canceled,and must be

restarted.

ˎTocancel the process, press

SET anytime. The SET

indicatorturns off.

SET

POWER

Device

Select

buttons

Number

buttons

TheSET indicator

lights up.

Searching for the correct code

Youcan set the manufacturer’scode using the Se archfunction.

1Poweron the device with its power switch.

2Aim the RM-VZ220 at the device you wantto set.

3Press andhold SET for more than 3 seconds.

The SET indicatorlig htsup.

While keeping SET held down,press the desired Device Select button,

then release both buttons.

4Enter 9- 2 - 2 using the number buttons.

The SET indicatorf lashes three times.

5Press andhold àto start searching.

When the device turns off, release the button.

If youovershoot the required code, you can search for the next or previous

code using the ßor ùbutton.

6Press .

The SET indicatorf lashes three timesand turns off.

7Check if the code number works correctly(s ee “RemoteButton

Descriptions”).

If youstill cannot operate the device, repeat steps to search for another

code that works formost functions of your device.

Checking the manufacturer’scode you have set

1Press andhold SET for more than 3 seconds.

The SET indicatorlig htsup.

While keeping SET held down,press the desired Device Select button,

then release both buttons.

2Enter 9- 3 - 3 using the number buttons.

The SET indicatorf lashes three times.

3Press à.

4When the SET indicatorstarts flashing, count the number of flashes.

Short flash(es) indicate which digit (first, second, etc.),followed by long

flash(es) to indicate the digit number(i.e., 2 long flashes represent the

number 2). “0” is indicatedby rapid flashing.

Determine the 5-digit code number this way.To recheck, press à.

5Press SET tof inish.

Clearing the automatic power-on control (Sony

devices only)

The Device Select buttons arepreset to automatically turn on a device when

pressed.

Tocancel the function:

1Press andhold SET for more than 3 seconds.

The SET indicatorlig htsup.

While keeping SET helddown, press ,then release both buttons.

2Enter 9- 7 - 7 using the number buttons.

The SET indicatorf lashes three times.

3Press the desiredD evice Select button.

The SET indicatorf lashes three timesand turns off.

Toset the function again, perform the same procedure above.

Restoring the factory settings

Youcan clear all the settings and reset the RM-VZ220 to its factory settings.

1Press andhold SET for more than 3 seconds.

The SET indicatorlig htsup.

While keeping SET helddown, press ,then release both buttons.

2Enter 9- 0 - 0 using the number buttons.

The SET indicatorf lashes three times.

Tocancel, press any button except .

3Press .

The SET indicatorf lashes three timesand turns off.

Remote Button Descriptions

General

ȩȪ SET: Pressto set up the RM-VZ220. The indicator lights or flashes while

setting.

ȫDeviceSelect buttons: Press to select the device to operate.

ȮGUIDE: Displaysthe program guide (EPG).

ȯj//V/p/: Movesthe cursor to select a menu item/enters the selected item.

ȱRETURN: Returns tot he previousdisplay/exits the menu.

ȳVOL+/–: Turns the volume up/down.

ȸPOWER: Turnsthe selected device on and off.

ȾMUTING: Mutesthe volume. Press again to turn muting off.

ɀSLEEP: Enables the Sleepf unction(w hen available).

Thenumber 5,CH+, and àbuttons each have a tactile dot for ease of use.

TheGUIDE and RETURN buttons do not work for a VCR.

Noteon the VOL+/– and MUTING buttons

Whena T V or othervideo de vice is selected, the TV’svolume is controlled. When a

DVDHome Theater is selected, its volume can be controlled.

ȬÃ: VIDEO 1 input

: VIDEO 2 input

: HDMI input

Ñ: RGB input

ù: (PIP INPUT) Changesthe

inputmode of the “window”

picture.

à: (PIP) Turnsthe “window”

pictureon and off.

ß: (PIP MOVE)Moves the

locationof the “window” picture.

ê: (PIP STILL) Freezesthe

“window”picture.

Ą: (PIP SWAP)Switches between

“main”and “window” picture.

ȭA: Red button

B: Green button

C: Yellowbutton

D: Blue button

ȰLIST: (CAPTION)Displays closed

captioning.

ȲMENU: Calls up the menu display.

ȴINPUT: Changest heinput mode.

ȵȶɁ 1– 9, 0, ENTER,ˎ(dot):

Changesthe channel. For example,

to changeto channel 5, press 0 and

5 (or,press 5 and ENTER).

ȹPAGE+/–: (PIP CH +/–) Changes

the channel up/downin the

“window”picture.

ȺFAVORITES:Enables the Favorite

function.

ȻINFO: Displaysprogram

information.

ȼOPTIONS: Displaysthe options

menu.

ȽRECALL: Selects the channel

previouslyselec ted.

ȿCH+/–: Switches the channel up/

down.

Cable set top box/IPTV

ȬÃ: Proceeds tot he previous

location.

: Briefly replaysthe s cene

(Flash –).

: Briefly fast forwards the

scene (Flash +).

Ñ: Proceeds to the next location.

ù: Fastreverses.

à: Plays.

ß: Fastforwards.

Ć: Records.

ê: Pauses.

Ą: Stops.

ȭA,B, C buttons

D: (Live TV) Displays Master

Guide.

ȰLIST: Displaysthe title of recorded

program.

ȲMENU: Calls up the menu display.

ȴINPUT: Changest heinput mode.

ȵȶ Ɂ 1 – 9, 0, ENTER,ˎ(dot):

Changesthe channel. For example,

to changeto channel 5, press 0 and

5 (or,press 5 and ENTER).

ȹPAGE+/–: Page up/down

ȺFAVORITES:Enables the Favorite

function.

ȻINFO: Displaysprogram

information.

ȼOPTIONS: Displaysthe options

menu.

ȽRECALL: Switchesbetween the

currentand previous channel.

ȿCH+/–: Switches the channel up/

down.

Satellite receiver

ȬÃ: Proceeds tot he previous

location.

: Briefly replaysthe s cene

(Flash –).

: Briefly fast forwards the

scene (Flash +).

Ñ: Proceeds to the next location.

ù: Fastreverses.

à: Plays.

ß: Fastforwards.

Ć: Records.

ê: Pauses.

Ą: Stops.

ȭA: Red button

B: Green button

C: Yellowbutton

D: Bluebutton

ȰLIST: Displaysthe title of recorded

program/PVRmenu.

ȲMENU: Calls up the menu display.

ȴINPUT: (TV/SAT)Switches the

outputbetween SAT and TV.

ȵȶ Ɂ 1 – 9, 0, ENTER,ˎ(dot):

Changesthe channel. For example,

to changeto channel 5, press 0 and

5 (or,press 5 and ENTER).

ȹPAGE+/–: Page up/down

ȺFAVORITES:Enables the Favorite

function.

ȻINFO: Displaysprogram

information.

ȼOPTIONS: Displaysthe Satellite

dish menu/StationIndex.

ȽRECALL: Tunesto the last tuned

station.

ȿCH+/–: Switches the channel up/

down.

VCR

Ȭù: Rewinds.

à: Plays.

ß: Fastforwards.

Ć: Records.

ê: Pauses.

Ą: Stops.

ȴINPUT: Changest heinput mode.

ȵ1– 9, 0: Number buttons

ȷì: Ejects a tape.

ȻINFO: (DISPLAY)Displays the

playback information.

ȼOPTIONS: (ANT/SW) Switches

the antennaoutput.

ȽRECALL: (DRIVE SELECT) Selects

the deck.

ȿCH+/–: Switches the channel up/

down.

ɁENTER: Entersthe selec teditem.

DVD player/recorder

ȬÃ: Skips tot he previous

chapter/track.

: Briefly replaysthe s cene

(Flash –).

: Briefly fast forwards the

scene (Flash +).

Ñ: Skips tothe next chapter/

track.

ù: Fastreverses.

à: Plays.

ß: Fastforwards.

Ć: Records(for DVD recorder).

ê: Pauses.

Ą: Stops.

ȭA: (SET UP) Calls up the system/

setup menu.

B: (SUBTITLE)Switches the

subtitle.

C: (AUDIO)Changes the sound.

D: (CLEAR) Clears the setting.

ȰLIST: Displaysthe Title List.

ȲMENU: Displaysthe DVD menu.

ȴINPUT: Changest heinput mode.

ȵ1– 9, 0: Number buttons

ȶˎ(dot): (+10) Selects numbers10

and above.

ȷì: Opens/closes the disc tray.

ȹPAGE+: (DVD) Selects the DVD

drive.

PAGE–: (HDD) Selects the

internalHDD (hard disk drive).

ȺFAVORITES:(TOP MENU)

Displaysthe Top Menu.

ȻINFO: (DISPLAY)Displays the

playback information.

ȼOPTIONS: Displaysthe options

menu.

ȽRECALL: (DRIVE SELECT)

Switchesbetween HDD and DVD.

ȿCH+/–: Switches the channel up/

down (forDVD recorder).

ɁENTER: Entersthe selec teditem.

Blu-rayDisc/HD-DVD player

ȬÃ: Skips tot he previous

chapter/track.

: Briefly replaysthe s cene

(Flash –).

: Briefly fast forwards the

scene (Flash +).

Ñ: Skips tot he next chapter/

track.

ù: Fastreverses.

à: Plays.

ß: Fastfor wards.

Ć: Records(for BD recorder).

ê: Pauses.

Ą: Stops.

ȭA: (SET UP) Calls upt hesystem/

setup menu.

B: (SUBTITLE)Switches the

subtitle.

C: (AUDIO)Changes the sound.

D: (CLEAR) Clears the setting.

ȲMENU: Displaysthe Pop-up Menu/

Disc Menu.

ȴINPUT: Changesthe input mode.

ȵ1– 9, 0: Number buttons

ȶˎ(dot): (+10) Selects numbers10

and above.

ȷì: Opens/closes the disc tray.

ȹPAGE+: (BD) Selects the BD drive.

PAGE–: (HDD) Selects the

internalHDD (hard disk drive).

ȺFAVORITES:(TOP MENU)

Displaysthe Top Menu.

ȻINFO: (DISPLAY)Displays the

playback information.

ȼOPTIONS: Displaysthe options

menu.

ɁENTER: Entersthe selec teditem.

DVR (digital video recorder)/PVR(personal video recorder)

ȬÃ: Proceeds to the previous

location.

: Briefly replaysthe s cene

(Flash –).

: Briefly fast forwards the

scene (Flash +).

Ñ: Proceeds to the next location.

ù: Fastreverses.

à: Plays.

ß: Fastfor wards.

Ć: Records.

ê: Pauses.

Ą: Stops.

ȭA: (REPLAY*)Enables the Replay

function forDVR/Replay TV.

B: (Live TV*) Displays Master

Guide.

ȰLIST: Displaysthe title of recorded

program.

ȲMENU: Calls up the menudisplay.

ȴINPUT: Changesthe input mode.

ȵ1– 9, 0: Number buttons

ȶˎ(dot): (+10) Selects numbers10

and above.

ȷì: Opens/closes the disc tray.

ȹPAGE+/–: Page up/down,

Thumbs*up/down

ȻINFO: (DISPLAY)Displays the

playback information.

ȽRECALL: Selects the channel

previouslyselec ted.

ȿCH+/–: Switches the channel up/

down.

ɁENTER: Entersthe selec teditem.

*These buttonscorrespond to TiVo

service or the Replay service. Refer to

itsinstruct ionmanual for details.

DVD HomeTheater

ȬÃ: Skips tot he previous

chapter/track.

: Briefly replaysthe s cene

(Flash –).

: Briefly fast forwards the

scene (Flash +).

Ñ: Skips tot he next chapter/

track.

ù: Fastreverses.

à: Plays.

ß: Fastfor wards.

Ć: Records.

ê: Pauses.

Ą: Stops.

ȭA: (SET UP) Calls upt hesystem/

setup menu.

B: (SUBTITLE)Switches the

subtitle.

C: (AUDIO)Changes the sound.

D: (CLEAR) Clears the setting.

ȰLIST: Enables the SOUNDFIELD

function.

ȲMENU: Displaysthe DVD menu.

ȴINPUT: Changesthe input mode.

ȵ1– 9, 0: Number buttons

ȶˎ(dot): (+10) Selects numbers10

and above.

ȷì: Opens/closes the disc tray.

ȺFAVORITES:(TOP MENU)

Displaysthe Top Menu.

ȻINFO: (DISPLAY)Displays the

playback information.

ȼOPTIONS: Displaysthe amplifier

menu.

ȽRECALL: (BAND) Selects FM/AM.

ȿCH+/–: Presets or tunes frequency

up/down.

ɁENTER: Entersthe selec teditem.

Notes on using the RM-VZ220

ˎThe RM-VZ220 will notp erformfunc tionsthat the device is not designed for. For

example,if your TV does not have the muting function, MUTING on the RM-VZ220

will notfunc tionwith your TV.

ˎThe function ofthe buttons varies depending on settings/operating modes. The table

of“Remote Button Descriptions” shows how the RM-VZ220 generally operates for

each device in the presetmo de.

ˎIfyour cable set top box can control volume, be sure to set its volume to a moderate

level.If the volume on the cable set top box is turned down completely,you will not be

ableto adjust your TV’s volume with the RM-VZ220.

Manufacturer’s Code List /

Liste des codes d’appareil par fabricant

English

The followingtables show brand names (Brand) and their corresponding

code numbers (CodeNo.).

1Press andhold SET for more than 3 seconds.

The SET indicatorlig htsup.

While keeping SET held down,press the desired Device Select button,

then release both buttons.

2Enter the manufacturer’scode.

The SET indicatorf lashes threetimes and turns off.

Français

Le tableau ci-dessous indiquedes marques (Brand) et les codes

correspondants(Code No.).

1Maintenezla touche SET enfoncée pendant plus de 3 secondes.

L’indicateurSET s’allume.

Touten maintenant la touche SET enfoncée, appuyezsur la touche de

sélection d’appareilsouhaitée, puis relâchez les deux touches.

2Saisissez le code d’appareildu fabricant.

L’indicateurSET clignote 3 fois, puis s’éteint.

TV / Téléviseur

Brand CodeNo.

Accurian 10675

Akai 10695

Allegro 10869

ApexDigital 10672, 11056

BelCanto Design 11571

Broksonic 10695

CineVision 10869

Citizen 10695

CyberHome 11024

Daewoo 10869

Denon 10490, 11634, 12258

Disney 10675, 11270

Emerson 10591, 10675

Enterprise 10591

Funai 10675

GE 10522

GFM 10675

GoVideo 10744, 10741, 10869, 11044,

11075

GoldStar 10741

Harman/Kardon 11229

Hitachi 10573,10664

Hiteker 10672

Insignia 10675, 12428, 12596

Integra 11769,10627, 12147

JVC 10623,10867, 11164

Kenwood 10490

LG 10591,10741, 10869

Magnavox 10503,10539, 10646, 10675,

11354

Marantz 10539,12414, 12432

Memorex 10695,11270, 12213

Microsoft 10522,12083

Mitsubishi 11521

NAD 10741,12572

Olevia 12331

Onkyo 10503, 11769, 10627, 11627,

12147

Brand CodeNo.

Oppo 10575,12545

Panasonic 10490, 11579, 11641

Philco 10675

Philips 10503, 10539, 12056, 12084,

10646,10675, 11267, 11354,

12434

Pioneer 10142,10631,11571, 12442

PolkAudio 10539

Presidian 10675

Proscan 10522

RCA 10522, 11769, 10822, 12213,

12587,12592, 12594

Rio 10869

Rotel 10623

Samsung 10490, 10573, 10199, 11044,

11075,12329, 12489

Sansui 10695

Sanyo 10695

Sharp 10630,10675, 12250

Shinsonic 10533

SonicBlue 10869

Sony 11633, 10533, 10864, 11033,

11070,11431, 11516

Sylvania 10675

Symphonic 10675

TCL 12587

Technics 10490

Tivo 11503

Toshiba 10503, 11769, 10695, 11154,

11503,12006, 12277

UrbanConcepts 10503

Viore 12553

Vizio 12563

Vtrek 12587

Xbox 10522,12083

Yamaha 10490, 10539, 10497, 10817,

12298

Zenith 10503, 10591, 10741, 10869

DVD player/ Lecteur DVD

Brand CodeNo.

Accurian 10675

ApexDigital 11056

Funai 10675

GoVideo 10741

JVC 11164

LG 10741

Magnavox 10646,10675

Panasonic 10490, 11579

Philips 10646

Brand CodeNo.

Pioneer 10631

RCA 10522

Samsung 10490

Sharp 10675

Sony 11033, 11070, 11431

Sylvania 10675

Toshiba 12277

Zenith 10741

DVD recorder/ Enregistreur DVD

Brand CodeNo.

Acer 01339

Action 00650

Admiral 00463

Akai 00812,01675,00702, 02232

Akira 01733

AOC 01365, 01589

ApexDigital 00748

Aventura 00171

Bell& Howell 00154

BPL 01543

Broksonic 00463

Carver 00054

Celebrity 00000

Coby 02306,02345, 02348

Commercial

Solutions

01447

Crosley 00054

Curtis 02352

CurtisMathes 00054,00154, 00702, 01661

Daewoo 01661

DigitalLifestyles 01765

Durabrand 00463,00171

Dynex 01463, 01810, 02049

Electroband 00000

Electrograph 01755

Electrohome 00463

Elektra 01661

Element 01687

Emerson 01864, 00154, 00463, 00171,

01661,01394

Emprex 01765

Envision 01365,01589

ESA 00812,00171

Fisher 00154

Funai 00171

Gateway 01755,01756

GE 01447,00051, 02359

GFM 00171

Haier 01748,01749, 02309, 02449

Harman/Kardon 00054

Hisense 00748, 01314, 02098

Hitachi 01643,02215, 02433

iLo 01684

Infinity 00054

Insignia 01564, 00171, 02049

JBL 00054

JCB 00000

JVC 00731,01253, 01601, 01774

KDS 01687

Kolin 01331

LG 01423,02358

LXI 00054, 00154, 00156

MAG 01687

Magnavox 01454,01866, 00054, 01254,

01365,02372

Marantz 00054

Matsushita 00650

Maxent 01755

Memorex 00154,00463, 00150

MGA 00150

Midland 00051

Brand CodeNo.

Mitsubishi 01250,00150, 00836

NAD 00156

NEC 01797

NetTV 01755

Norcent 00748, 01365, 01589

Olevia 01610,01144, 01331

Onida 01253, 02396

Optimus 00154,00650

Orion 00463, 01463

Panasonic 01480, 00051, 00650

PARK 02104

Penney 00156,00051

Petters 01523

Philco 00054

Philips 01454, 00054, 00690, 01744,

02372

Pioneer 01457,01260

Polaroid 01523,01276, 01314, 01687

Portland 01661

Prism 00051

Proscan 01447, 02147, 02256

Proview 01687

Quasar 00051,00650

RadioShack 00154

RCA 01447, 01781, 02187, 02247,

02403,02429, 02434

Realistic 00154

Sampo 01755

Samsung 00812, 00702

Sansui 00463

Sanyo 00154, 01142

Sceptre 01360,01599

Scott 01711

Sears 00054, 00154, 00156, 00171

Sharp 00818

Sony 00810, 00000

Spectroniq 01687

Squareview 00171

Superscan 00864

Supreme 00000

SVA 00748

Sylvania 01864, 00054, 00171, 01314,

01394

Symphonic 00171

Syntax 01610, 01144, 01331

Tatung 01756

TCL 02403,02429

Technics 00051

Techwood 00051

Teknika 00054, 00150

Telefunken 00702

Toshiba 01524, 00154, 00156, 00650

TVS 00463

Venturer 01865

Videocon 01540,01541, 02436

Vidikron 00054

Viewsonic 01755, 00864, 00885, 01627,

01742

Viore 01684,02104, 02352

Vizio 01758,00864, 00885, 01756

VU 02098

Brand CodeNo.

Wards 00054

Waycon 00156

Westinghouse 01712, 00885, 01577

White

Westinghouse

00463,01661

Wyse 01365

Zenith 00463, 01661

Blu-rayDisc/HD-DVD player/

Lecteur Blu-rayDisc/DVD HD

Brand CodeNo.

Denon 12258

Insignia 10675, 12428, 12596

Integra 11769,12147

LG 10741

Magnavox 10675

Marantz 12414,12432

Microsoft 12083

NAD 12572

Olevia 12331

Onkyo 11769, 12147

Oppo 12545

Panasonic 11641

Brand CodeNo.

Philips 12084, 12434