Sony ExwaveHAD DXC-C33 Dimensional drawing

SONY 3-CCD Color Video Camera
For use of authorised dealers
Product Information Manual
DXC-C33/C33P
.
New cover1.qxp 01.12.11 2:49 PM Page 1

DXC_C33_C33P.qxd 02.2.8 5:57 PM Page 2

CONTENTS
1. PRODUCT CONCEPT P. 2
2. APPLICATIONS P. 3
3. KEY FEATURES P. 4
4. MENU FUNCTION P. 9
5. CAMERA CONNECTORS P. 12
6. CONNECTOR PIN ASSIGNMENTS P. 14
7. SPECIFICATIONS P. 15
8. OPTIONAL ACCESSORIES P. 18
9. SYSTEM EXAMPLES P. 22
10. DIMENSIONS P. 25
11. TECHNICAL APPENDIX P. 26
12. Q & A P. 30
DXC-C33/C33P
DXC_C33_C33P.qxd 02.2.8 5:58 PM Page 1

1. PRODUCT CONCEPT
1. PRODUCT CONCEPT
High-performance,
remote-head type camera
●Small and light camera head unit
●C mount 3-CCD
●High picture quality
●DV output
●Digital signal processing
2 – DXC-C33/C33P Product Information Manual
DXC-C33/C33P
DXC_C33_C33P.qxd 02.2.8 5:59 PM Page 2

2. APPLICATIONS
DXC-C33/C33P Product Information Manual – 3
2. APPLICATIONS
Surgical microscopy
Slit lamp
Semiconductor
Tube
Sports
Production
Medical
Industrial inspection
Special angle shooting
DXC_C33_C33P.qxd 02.2.8 5:59 PM Page 3

3. KEY FEATURES
4 – DXC-C33/C33P Product Information Manual
3. Key Features
Horizontal resolution 850 TV lines
Signal to Noise (S/N) ratio NTSC: 62 dB (typical)
PAL: 61 dB (typical)
Sensitivity F8.0 at 2000 lux (3200 K)
Minimum illumination 4 lux (F2, GAIN: Hyper)
Output signal DV, VBS, RGB/SYNC, Y/C
Dimensions (W x H x D) CHU: 32 x 38 x 40 mm (15/16 x 11/2x 15/8inches)
CCU: 200 x 88 x 242 mm (77/8x 31/2x 95/8inches)
Power consumption Max. 18 W
Mass CHU: 48 g (1.7 oz)
CCU: 2.5 kg (5 lb 8 oz)
3. KEY FEATURES
Basic Specifications
Features
■Small camera head
The DXC-C33/C33P can be installed in space-limited
locations. The size of the camera head unit (CHU) is
one of the smallest of all the 1/3 type 3-CCD
cameras.
■High picture quality
The DXC-C33/C33P can clearly capture detailed
object images. Using three 1/3 type CCDs, the
camera can realize 2000 lux at F8, a S/N ratio of 62
dB (NTSC) or 61 dB (PAL) and achieve a horizontal
resolution of 850 TV lines.
■Frame memory
Built-in frame memory can provide a remakable
freeze image and enhanced image sensitivity by
the Long-Term exposure function. Images captured
by the Long-Term exposure function can be output
continuously.
800 TV lines picture 850 TV lines picture
(Simulated picture)
Gain: 18 dB Long exposure: 32 frames
■10-bit DSP
The DXC-C33/C33P can capture superior pictures
by adopting full Digital Signal Processing (DSP) of
10 bits.
DXC_C33_C33P.qxd 02.2.8 6:03 PM Page 4

3. KEY FEATURES
DXC-C33/C33P Product Information Manual – 5
■Partial Enhance
This function allows a particular color to be selected, and its
hue, saturation and detail to be altered. In addition, the detail
produced by the high resolution of the camera can be
softened or emphasized in certain parts of the image with the
Partial Enhance function.
■Two AE areas preset
AE (Automatic Exposure) function is very useful in
determining the best area for incoming light metering.
Users can select and set up two of the six differentAE
modes and can easily switch them on the front panel.
• The Multi mode measures the luminance level on
the 9 divided windows and the center window is
weighted compared to the others.
• In Manual mode, the user can freely define the
light metering area.
■User-friendly control panel
The front panel is very easy to use with good-sized
switches that are smartly arranged.
<MULTI>
<SPOT>
<LARGE>
<SLIT>
<MID>
<MANUAL>
OPTIONAL AREA
OFF ON
■RS-232C interface
Easy control and operation of the camera by an
external computer is possible. For details of the
RS-232C protocol, please refer to the Control
Protocol or contact your nearest Sony office.
■External synchronization
(VBS Genlock, HD/VD)
The DXC camera can be synchronized with an
external VBS signal from other equipment and
includes a SC/H phase adjustment control. HD/VD
sync signals also can be accepted. This is very
useful in multiple camera operation and in
connection with frame grabber boards.
■Color shading compensation
The color shading compensation feature provides a
uniformed color for images displayed on the screen.
DXC_C33_C33P.qxd 02.2.8 6:03 PM Page 5

3. KEY FEATURES
6 – DXC-C33/C33P Product Information Manual
■i.LINKTM (DV) out
DV (Digital Video) is the standard for consumer digital video. DV complies with the same IEEE1394 interface
standard as the DFW Series. Thanks to data-compression technology, the transmission speed of DV is
approximately 25 Mb/s. This figure is about 1/5 of the transmission speed of the DFW Series (no compression).
DV can be connected to a PC and various application software is available for DV. Users can therefore enjoy the
high quality of DV compression with the excellent line-up of the DVCAM Series. The DXC-C33/C33P is equipped
with a DV output terminal so that images can be recorded into an i.LINK interface-equipped VTR with no quality
deterioration.
This feature is first to be introduced to small 3-CCD cameras.
Why was the DVCAM format Born?
The DVCAM format is optimized for professional editing, based on and maintaining cross play with the DV format.
Digitization
• High-quality picture and sound
• Superb dubbing quality
• Unique functions provided by compression technology
High-performance editing
capabilities for professional use
• SMPTE/EBU time code
• RS-422A interface
• Newly developed mechanism
The DVCAM format was developed to meet the following key demands:
•Digitization (trend from analog to digital)
•High-performance editing capabilities for professional use
•Full compatibility with the DV format
CONCEPT - What is the benefit of the DVCAM for the DXC-C33/C33P?
* i.LINK stands for IEEE-1394-1995 standards and their revisions.
Note: Sony VAIO computers are checked with Sony DV products, but not with DVCAM, concerning the i.LINK interconnection.
Some VAIO application software may not work with DVCAM.
DXC_C33_C33P.qxd 02.2.8 6:03 PM Page 6

3. KEY FEATURES
DXC-C33/C33P Product Information Manual – 7
The DVCAM format
The DVCAM format, which is available for the DXC-C33/C33P is, a professional development of the DV format.
Specific advantages, shown below, mean it is optimised for professional editing.
The features and benefits of DVCAM format
◆5:1 DV compression
•Longer duration recording (max. 3 hours)
•High-speed data transfer capability
◆Digital components
•High-quality picture
•Superb dubbing quality via QSDI & DV I/O
◆Cassette memory
•Newly developed ClipLink system for top-of-the-range DVCAM VTRs
•Photo mode for mid-range DVCAM VTRs
The DVCAM & DV format
DVCAM
DV
Consumer use
Professional use
•15µm track pitch
•Audio lock recording✱
•10µm track pitch
•Audio unlock recording✱
Audio mode and audio channel are not available in the DXC-C33/C33P
✱
•5 : 1 DV compression method
•New advanced ME tape
•Standard size & Mini size cassettes
•2CH & 4CH audio recording modes✱
DXC_C33_C33P.qxd 02.2.8 6:03 PM Page 7

3. KEY FEATURES
8 – DXC-C33/C33P Product Information Manual
Format DVCAM DV DVCPRO
Compression method 5:1 DV compression 5:1 DV compression 5:1 DV compression
Tape material ME ME MP
(Metal Evaporated) (Metal Evaporated)
Cassette size Standard / Mini Standard / Mini L / M
Track pitch 15µm10µm (LP : 7.5µm) 18µm
Tape speed 28.193 mm/s 18.812 mm/s 33.820 mm/s
Compatibility cassette Playback of Mini
with Home DV (Adaptor required)
Full Compatibility —Playback of Standard
cassette
(Menu switching required)
Audio mode Lock mode* Unlock mode Lock mode
Audio channel 16bit 2ch / 12bit 4ch* 16bit 2ch / 12bit 4ch 16bit 2ch
Compatibility X
with i.LINK (DV) terminal O O (compatibility with
other DVCPRO)
Max. duration recording time
184 min. (Max) 270 min. (Max) 184 min. (Max)
Max. cassette size LP: 405 min. (Max)
Max. duration recording time
40 min. (Max) 80 min. (Max) 66 min. (Max)
Min. cassette size LP: 120 min. (Max)
Linear track X X CTL / CUE track
Comparison of 1/4 inch DVCAM, DV, and DVCPRO
* Audio mode and Audio channel are not available in the DXC-C33/C33P.
DXC_C33_C33P.qxd 02.2.8 6:03 PM Page 8

4. MENU FUNCTION
DXC-C33/C33P Product Information Manual – 9
4. MENU FUNCTION
Configuration
Exposure
Main Menu
Contrast Enhance General System Scene FileWhite Balance
Main Menu
Sub Menu
<MAIN MENU> [A]
>EXPOSURE
CONTRAST
WHITE BALANCE
ENHANCER
GENERAL
SYSTEM
SCENE FILE
Select Next Exit
<SCENE FILE> [A]
>FILE SELECT A
LOAD
Select Back
<SYSTEM> [A]
>BAUD RATE 9600
D-SUB VIDEO VBS
D-SUB SYNC C.SYNC
RGB SYNC G
12P CONNECTOR IN
Select Back
<GENERAL> [A]
>CCD MODE FIELD
SHADING COMP. OFF
TRIGGER OFF
NEGA OFF
FLICKER CANCELLER OFF
Select Back
<ENHANCER> [A]
>DETAIL ALL
LEVEL ±0
FREQUENCY MID
LINEAR MATRIX ALL
MODE STANDARD
Select Back
<WHITE BALANCE> [A]
>MODE AWB
R. PAINT ±0
B. PAINT ±0
AREA NORMAL
Select Back
<CONTRAST> [A]
>EFFECT MANUAL
KNEE POINT MID
BLACK STRETCH ±0
GAMMA ON
LEVEL ±0
MASTER PEDESTAL ±0
R. PEDESTAL ±0
B.PEDESTAL ±0
Select Back
<EXPOSURE> [A]
>GAIN STEP
STEP 0dB
SHUTTER OFF
Select Back
DXC_C33_C33P.qxd 02.2.8 6:03 PM Page 9

4. MENU FUNCTION
10 – DXC-C33/C33P Product Information Manual
Setting Items in the Menu
<EXPOSURE> [A]
>GAIN STEP
STEP 0dB
SHUTTER OFF
Select Back
<WHITE BALANCE> [A]
>MODE AWB
R. PAINT ±0
B. PAINT ±0
AREA NORMAL
Select Back
<CONTRAST> [A]
>EFFECT MANUAL
KNEE POINT MID
BLACK STRETCH ±0
GAMMA ON
LEVEL ±0
MASTER PEDESTAL ±0
R. PEDESTAL ±0
B. PEDESTAL ±0
Select Back
•GAIN Adjusts the video gain
•STEP Sets the gain level
•SHUTTER Sets the electronic shutter modes
•SPEED Sets the shutter speed
•AE LEVEL Finely adjusts the focusing point of AE adjustment
•AE AREA 1 Sets the AE window in AGC or CCD IRIS or auto iris
AE AREA 2 adjustment mode
•AE SPEED Sets AE focusing speed in AGC or CCD IRIS or control
mode
•AE DETECT Sets the detection method of the luminance level of the
selected AE window
•MODE Selects white balance modes
•R./B. PAINT or
Finely adjusts the white balance (AWB, ATW)
•R./B. GAIN or manual white balance (MANU)
•EFFECT Adjusts the picture contrast in accordance with the
incident luminance level
•KNEE POINT Sets the Knee point
•
BLACK STRETCH Adjusts the luminance of dark portions on the screen
•GAMMA Activates gamma compensation
•LEVEL Adjusts the gamma level
•
MASTER PEDESTAL Sets the pedestal level of the output signal
•R./B. PEDESTAL Finely adjusts the pedestal level
DXC_C33_C33P.qxd 02.2.8 6:03 PM Page 10

4. MENU FUNCTION
DXC-C33/C33P Product Information Manual – 11
•DETAIL Enables or disables adjustment of
sharpness of the image outline
•LEVEL Adjusts the sharpness of the image outline
•FREQUENCY Adjusts the sharpness of the detailed image
outline
•LINEAR MATRIX Enables or disables processing of a color
matrix
•MODE Finely adjusts the color tone
•TARGET COLOR Specifies the color for DETAIL or LINEAR
MATRIX adjustments
•BAUD RATE Selects the baud rate
•D-SUB SYNC Switches the sync signal from the D-sub 9-pin
•RGB SYNC Adds a sync signal to the RGB output
•
EXT SYNC Switches the input and output of the EXT SYNC (HD,
VD/SYNC) jack and selects the output signal
•H.PHASE Adjusts the horizontal phase when using the camera with
the external sync signal
•
SC.PHASE ROUGH Roughly adjusts the subcarrier phase when using the
camera with the external sync signal
•SC.PHASE FINE Finely adjusts the subcarrier phase
•FILE SELECT Selects the file into which you store the setting
•LOAD Selects the type of setting to be stored, and loads it
•CCD MODE Selects the CCD read-out mode
•SHADING COMP. Eliminates color at the top and bottom of the screen
•LEVEL Adjusts the SHADING COMP. level
•FS/TRIG IN Selects the input signal from the FS/TRIG IN connector
•NEGA Reverses the output image to negative
•
FLICKER CANCELLER Reduces flicker when SHUTTER is set to CCD IRIS or
OFF
<ENHANCER> [A]
>DETAIL ALL
LEVEL ±0
FREQUENCY MID
LINEAR MATRIX ALL
MODE STANDARD
Select Back
<GENERAL> [A]
>CCD MODE FIELD
SHADING COMP. OFF
FS/TRIG IN OFF
NEGA OFF
FLICKER CANCELLER OFF
Select Back
<SYSTEM> [A]
>BAUD RATE 9600
D-SUB VIDEO VBS
D-SUB SYNC C.SYNC
RGB SYNC G
EXT SYNC IN
Select Back
<SCENE FILE> [A]
>FILE SELECT A
LOAD
Select Back
DXC_C33_C33P.qxd 02.2.8 6:03 PM Page 11

5. CAMERA CONNECTORS
5. CAMERA CONNECTORS
12 – DXC-C33/C33P Product Information Manual
Front Panel
CAMERA
FREEZE
BARS
MENU
WHITE
BLACK
ENTER
AE AREA
SELECT
LOCK
AE LEVEL
RED GAIN BLUE
GAIN
24dB
CAMERA CONTROL UNIT
0dB
SCENE FILE
SELECT
•FREEZE button and indicator
Pressing this button stores an image
in the built-in frame memory and outputs
it as a freeze picture. When the freeze picture
mode is activated, the indicator lights.
•(Power) switch and indicator
The indicator lights up in green when
the power is on.
Note: the CHU must be
connected to the
CCU by the camera
cable before switching
on or off.
•LEFT/FILE SELECT button
While the menu is displayed;
Decreases the setting value or changes the setting.
Also used for an AE window setting, etc.
While the normal screen is displayed;
Switches the user preset file between A and B
•UP/BLACK (black balance)
button
While the menu is displayed;
Moves the menu cursor upward.
Also used for an AE window
setting, etc.
While the normal screen is
displayed;
Activates the automatic black
balance adjustment.
•MENU button
Displays/hides the menu on the monitor
screen.
When a setting menu is displayed, press
this button to return to the MAIN menu.
•ENTER button
Selects a setting menu. Also used for
an AE window setting, etc.
•AE AREA SELECT button
Selects the AE window set in
the menu. Each press of the
button selects the AE AREA 1
or the AE AREA 2.
Note: The button functions
only when
GAIN is set to AGC or
SHUTTER is set to
CCD-IRIS.
•CAMERA connector (20-pin)
Connects to the CHU via the
CCMC-20P05/10/30 camera cable.
•BARS (color bars output)
button
Displays/hides color bars.
•DOWN button
Moves the menu cursor
downward.
Also used for an AE window
setting, etc.
•GAIN control
Adjusts the gain
level in the range
from 0 to 24 dB.
•GAIN RED/BLUE controls
Controls fine adjustment of white
balance when AWB or ATW mode
is selected. Also controls the red
and blue gain when adjusting the
white balance manually.
•RIGHT/WHITE (white
balance) button
While the menu is displayed;
Increases the setting value or
changes the setting. Also
used for an AE window
setting, etc.
While the normal screen is
displayed;
Activates the automatic white
balance adjustment when
MODE is set to AWB in the
WHITE BALANCE menu.
•LOCK button and
indicator
Locks all buttons and knobs
on the CCU except for power
switch (The indicator lights).
Note: The lock mode retains
after the unit is
switched off.
•AE LEVEL control
Adjusts the auto exposure
convergence level, when the
camera is set to AGC or CCD-
IRIS mode.
Luminance level is precisely
adjusted in KNOB mode.
DXC_C33_C33P.qxd 02.2.8 6:03 PM Page 12

5. CAMERA CONNECTORS
DXC-C33/C33P Product Information Manual – 13
Rear Panel
OUT PUT
VIDEO DV HD
VD/SYNC
~ AC IN
S-VIDEO RGB/SYNC
EXT SYNC FS/TRIG IN
REMOTE
•VIDEO OUTPUT connector (BNC type)
Outputs a composite video signal.
•S VIDEO OUTPUT connector
(mini DIN 4-pin)
Outputs an S video (Y/C video) signal. •RGB/SYNC connector (D-sub 9-pin)
Outputs RGB signals and their respective
sync signals
•~ AC IN
Connects to the AC power cord.
•DV connector (6-pin)
The terminal for DV output conforming to
i.LINK. Uses this to connect to video
peripherals that incorporate DV terminal.
•FS/TRIG IN (Foot Switch/Trigger input)
connector (Stereo minijack)
Connects to the optional Foot Switch. When
the camera is in strobe mode, connects a
commercially available slave unit.
•Equipotential ground terminal
Connects to the plug to bring the
various parts of a system to the
same potential.
•EXT SYNC (external sync)
(HD, VD/SYNC) connectors (BNC type)
Inputs reference sync signals for synchronizing
the camera operation. When using the internal
sync signals, outputs the HD/DV or composite
sync signals.
DXC_C33_C33P.qxd 02.2.8 6:03 PM Page 13

6. CONNECTOR PIN ASSIGNMENT
6. CONNECTOR PIN ASSIGNMENT
14 – DXC-C33/C33P Product Information Manual
9-Pin D-sub Connector
5 4 3 2
9 8 7 6
1
MENU D-sub VIDEO: VBS D-sub VIDEO: VBS D-sub VIDEO: Y/C D-sub VIDEO: Y/C
D-sub SYNC: C.SYNC D-sub SYNC: WEN D-sub SYNC: C.SYNC D-sub SYNC: WEN
1 VBS OUT (G) VBS OUT (G) Y/C OUT (G) Y/C OUT (G)
2 RGB OUT (G) RGB OUT (G) RGB OUT (G) RGB OUT (G)
3 R OUT (X) R OUT (X) R OUT (X) R OUT (X)
4 G OUT (X) G OUT (X) G OUT (X) G OUT (X)
5 B OUT (X) B OUT (X) B OUT (X) B OUT (X)
6 VBS OUT (X) VBS OUT (X) Y OUT (X) Y OUT (X)
7 C.SYNC OUT (X) WEN OUT (X) C.SYNC OUT (X) WEN OUT (X)
8 C.SYNC OUT (G) WEN OUT (G) C.SYNC OUT (G) WEN OUT (G)
9 (X) (X) C OUT (X) C OUT (X)
8 7 6
345
2 1
1 INTER CONNECT
2 INTER CONNECT
3 DATA OUT
4 DC OUT (G)
5DATAIN
6NC
7 DC OUT (+)
8NC
Mini Din 8-Pin Connector
DXC_C33_C33P.qxd 02.2.8 6:03 PM Page 14

7. SPECIFICATIONS
DXC-C33/C33P Product Information Manual – 15
7. SPECIFICATIONS
Image System/Optical System
Image device 1/3type IT (Internal Transfer) CCD
Effective picture elements NTSC: 768 x 494
(H x V) PAL: 752 x 582
Sensing area (H x V) 4.8 x 3.6 mm
Unit cell (H x V) NTSC: 6.35 x 7.40 um
PAL: 6.50 x 6.25 um
Mount C mount
Video System
Synchronization system Internal or External with VBS or HD/VD
Signal format DXC-C33: NTSC standard format (EIA standard)
DXC-C33P: PAL standard format (CCIR standard)
Scanning system DXC-C33: 2 : 1 interlaced, 525 lines
DXC-C33P: 2 : 1 interlaced, 625 lines
Scanning frequency DXC-C33: 15.734 kHz
DXC-C33P: 15.625 kHz
Functions/Performance
Horizontal resolution 850 TV lines
Sensitivity F8.0 at 2000 lux (3200 K)
Minimum illumination 4 lux (F2, GAIN: HYPER)
S/N ratio DXC-C33: 62 dB (typical)
DXC-C33P: 61 dB (typical)
Gain control STEP/AGC/HYPER selectable
STEP: 0 to 24 dB by 1 dB step
AGC: 0 to 24 dB (Limit value: 6 dB,12 dB, 18 dB, 24 dB (selectable))
HYPER: 30 dB
Electronic shutter 8.0 to 1/100,000 s
Lens Manual Iris
AE area Multi/Large/Medium/Spot/Slit/Manual (selectable)
DXC_C33_C33P.qxd 02.2.8 6:03 PM Page 15

7. SPECIFICATIONS
16 – DXC-C33/C33P Product Information Manual
Input/Output
Video output signals i.LINK (DV): IEEE1394 Based
VBS: 1.0 Vp-p, 75 Ω, sync negative
RGB: 0.7 Vp-p, 75 Ω, sync (switchable)
SYNC: 2 Vp-p, 75 Ω
Y: 1.0 Vp-p, 75 Ω
C: NTSC 0.286 Vp-p, 75 Ω,without sync
PAL 0.3 Vp-p, 75 Ω, without sync
External sync input VBS/BS, HD/VD
Input/Output connectors DV OUT (6-pin jack)
RGB/SYNC (9-pin D-sub)
VIDEO OUT (BNC)
S-VIDEO (4-pin mini DIN)
FS/TRIG IN (Stereo Mini jack)
REMOTE (8-pin mini DIN)
AC Inlet
Camera (20-pin)
AE level Variable
AE speed Fast/Mid/Slow (selectable)
AE detect Average/Peak (selectable)
Contrast effect Manual/DynaLatitude/DCC+ (selectable)
Gamma ON/OFF (Variable at ON)
Pedestal Master and R/B Manual (adjustable)
Black balance ABB
White balance AWB/ATW NORMAL/ATW WIDE/MANUAL/3200 K/5600 K (selectable)
AWB or ATW R/B Paint,MANUAL R/B Gain
Detail level ALL/TARGET/OFF (Variable at ALL or TARGET)
Detail frequency HIGH/MID/LOW (selectable)
Linear matrix ALL/TARGET/OFF
CCD integration mode FIELD/FRAME (selectable)
Shading compensation OFF/ON (Manual control)
Baud rate 19200/9600/4800/2400/1200 (selectable)
User file A/B (switchable) (Two pattern memories)
Scene file STANDARD/MICROSCOPE/FULL AUTO/STROBE/FILE A or B
DXC_C33_C33P.qxd 02.2.8 6:03 PM Page 16

7. SPECIFICATIONS
DXC-C33/C33P Product Information Manual – 17
General
Power supply 100 to 240 V AC, 50/60 Hz
Operation temperature -5 to 45°C (23 to 113°F)
Storage temperature -20 to 60°C (-4 to 140°F)
Operating humidity 20% to 80%
Storage humidity 20% to 90%
Power consumption Max. 18 W
Dimensions CHU: 32 x 38 x 40 mm (15/16 x 11/2x 1 5/8inches)
(W x H x D) CCU: 200 x 88 x 242 mm (77/8x 31/2x 9 5/8inches)
Weight CHU: 48 g (1.7 oz)
CCU: 2.5 kg (5 lb 8 oz)
Supplied accessories Tripod adaptor
AC power cable
Lens cap
Panel sheet for RM-C950
Operation instruction manual
DXC_C33_C33P.qxd 02.2.8 6:03 PM Page 17

8. OPTIONAL ACCESSORIES
8. OPTIONAL ACCESSORIES
18 – DXC-C33/C33P Product Information Manual
Cable CCMC-20P05/20P10/20P30
•Specially designed camera cable for DXC-C33/C33P
•20-pin Multi Cable (5/10/30 m) for connecting CHU to CCU
Features
DVCAMTM Recorder DSR-11
•Employs the DVCAM format to offer excellent picture and sound
quality. Also compatible with DV format recording and playback
(SP mode only)
•The compact, unique design enables both horizontal and vertical
installation
•Compatible with both Standard and Mini cassette sizes
•Compatible with both NTSC and PAL recording/playback
•i.LINK (DV) interface allows a single cable connection to
simultaneously transfer audio, video and command signals with
virtually no quality loss
•Wireless Remote Commander RMT-DS11 supplied
•Dimensions (W x H x D): 180 x 69 x 258.4 mm
(7 1/8x 2 3/4x 10 1/4inches),
excluding projections
•Mass: 2.8 kg (6 lb 2 oz)
•Power consumption: 15 W
Features
DXC_C33_C33P.qxd 02.2.8 6:03 PM Page 18