Sony Ht-ct790 User guide

2Connecting with a TV

HDMI cable (not supplied)*

Optical digital cable

(supplied)

HDMI cable (not supplied)*

YES NO

Is the HDMI input jack on your TV labeled “ARC” ?

* To enjoy images in 4K/60p, usage of the Premium High Speed HDMI cable(s) with Ethernet is recommended. For details, refer to “Playable Types of Files” in the Operating Instructions (separate document).

Note

•Make sure that the HDMI cable is firmly inserted.

3Connecting with other devices

HDMI cable (not supplied)*

Blu-ray Disc™ player, cable

box or satellite box, etc.



Disconnect the HDMI cable from the HDMI IN jack of the TV, then reconnect it to any of the HDMI IN jacks (HDMI IN 1/2/3) on the Bar Speaker.

To enjoy the high quality surround sound of Dolby TrueHD, DTS HD, etc., switch the connection of the Blu-ray Disc™ player, cable box, satellite box, etc. to the system.

Tip

•The Standby Through function allows you to output HDMI signals to the TV even when the system is in standby mode.

Set the settings as follows; Press HOME - [Setup] - [System Settings] - [HDMI Settings] - [Standby Through], then select [Auto] or [On].

•To enjoy copy right-protected 4K content, refer to “Connection for Viewing Copyright-protected 4K Content” in the Operating Instructions (separate document).

Note

•Make sure that the HDMI cable is firmly inserted.

4Setting up the remote control

1Locating the installation position

Subwoofer

Bar Speaker

To mount the Bar Speaker on a wall

Refer to “Mounting the Unit on a Wall” in the Operating Instructions (separate document).

Note

•Do not place magnetic cards on the system or near the system.

•Do not place metal objects other than a TV around the system. Wireless functions may become unstable.

Sound Bar

Startup Guide

4-586-048-73(1)

HT-CT790

Supplied accessories

Remote control (1) R03 (size AAA) batteries (2) Optical digital cable (1)

Wall mounting brackets (2)

Screws (2)

Operating Instructions (1) Startup guide (this document) (1)

About the operation method of the system

Connect this system and the TV with the HDMI cable (not supplied) to display the operation screen

of the system on the TV. Prepare the HDMI cable.

Refer to the Operating Instructions (separate

document) for the network settings, the NFC

function, and other functions.

Operating Instructions

Continued on back page

5Turning on the TV

Power

6Turning on the system

Power indicator

(green)Front Panel



 /



Connect the AC power cords (mains leads) of the Bar Speaker and subwoofer.



Press (power) of the remote control.

The front panel display lights up.



Confirm that the power indicator of the subwoofer is lit in green.

If not, refer to “Subwoofer” of “Troubleshooting” in the Operating Instructions (separate

document).



Turn on the connected device.

Tip

•For details on the settings of the control for HDMI on the TV, refer to the Operating Instructions supplied

with the TV.

7Performing Easy Setup

////

HOME



Press HOME on the remote control of this system.

The Easy Setup screen is displayed on the TV screen.

If the Easy Setup screen does not appear, use the remote control of the TV to switch the TV

input setting to the HDMI input jack that connects the TV to the system.



Press ///to select an item as instructed on the TV screen, and then press

to perform Easy Setup.



Once [Easy Initial Settings are complete.] appears, select [Finish].

Tip

•On-screen instructions are displayed in the language you selected in this step.

•For details on the network connection, refer to“Enjoying with the Network Function” in the Operating

Instructions (separate document).

8Listening to the sound

INPUT +/–

+/–

HOME

///

SW +/–

Home menu

Listening to the audio of the TV



Select the desired program using the remote control of the TV.

The screen switches to the television broadcast screen and the TV audio is output from

the system.

If the sound of the TV does not output from the system, press INPUT +/− of the supplied

remote control until “TV” appears in the front panel.



Adjust the volume.

Adjust the volume by pressing +/− on the remote control of the system.

Adjust the volume of the subwoofer by pressing SW +/− on the remote control of the

system.

For details on the sound quality adjustment, refer to “Selecting the Sound Effect” in the

Operating Instructions (separate document).

To enjoy an input device other than the TV



Press HOME.

The home menu appears on the TV screen.



Press ///to select the desired input on the home menu.

For details, refer to “About the Home Menu” in the Operating Instructions (separate

document).

Troubleshooting

No TV sound is output from the system, or no picture is displayed on the TV

•Press INPUT +/− on the remote control of the system repeatedly until “TV” appears in the front panel display on the system.

•Make sure that the input and output of the HDMI jack of the system are correct.

•Disconnect the cables connecting the TV and the system, and then connect them again. Make sure that the cables are firmly inserted.

•Depending on the order you turn on the TV and the system, the system may enter muting mode and “Muting” may appear in the front panel display. In this case, turn on the TV first, then the system.

No picture or sound of the device connected to the system is output

•Press INPUT +/− on the remote control of the system repeatedly until the input connecting the desired device appears on the front panel display of the system.