Sony SA-EX100 User manual

SA-EX100/S900
US Model
Canadian Model
Tourist Model
SA-S900
AEP Model
UK Model
Australian Model
SA-EX100
E Model
SA-EX100/S900
SERVICE MANUAL
SA-EX100 is the ACTIVE SPEAKER
SYSTEM section in MHC-EX10AV.
SA-S900 is the ACTIVE SPEAKER
SYSTEM section in MHC-C9EX. Photo : SA-S900 model (US model)
SPECIFICATIONS
Speaker system = Active speaker, 2-way,
bass-reflex type
(Woof er) Speaker units
With 6 ohm loads driven i Woofer: 15 cm dia., cone type
from 40 — 3,000 Hz; rated Tweeter: 2.5 x 10 cm, electrostatic
50 . . type
watts minimum RMS Continuous RMS power output
power, with no more than Wooler: @ — 30 :
re) . ohms at 40 -
0.9 Yo total harmonic 3,000 Hz, 0.9% THD)
distortion from 65W+65W
250 milliwatts to rated ae a Se
output. Tweeter: 8W+8W
(50 ohms at 3,000 —
20,000 Hz, 0.9% THD)
(Tweeter) 10W+10W
With 50 ohm loads driven, (50 ohms at 10 kHz,
from
3,000
—
20,000
Hz;
rated
_
5%
THD)
tk Power consumpiton
8 watts minimum RMS 60 W
power, with no more than Dimensions i
Oo : Approx. 220 x 455 x 350 mm (w
0.9 Yo total harmonic (8 3/4.x 18 x 13 7/8 inches)
distoration from Mass Approx. 8.2 kg
250 milliwatts to rated oP kea) net Per
ii tpu t speaker
Power requirements
120 V AC, 60 Hz (US, Canadian model)
220 — 230 V AC 50/60 Hz (AEP, UK model)
110 — 120, 220 — 240 V AC adjustble 50/60 Hz
(E, Australian, Tourist model)
ACTIVE SPEAKER SYSTEM
SONY.

MODEL IDENTIFICATION
— Specification Label —
SONY.
ACTIVE SPEAKER SYSTEM
SERIAL NO.
a a [7
MADE
IN
JAPAN
4-971-Z7
SA-S900 US, Canadian model: 390-00
E, Tourist model : 391-00
SA-EX100 AEP model : 393-00
UK, German model : 394-00
E, Australian model : 392-00
TABLE OF CONTENTS
Section Title Page
SECTION 1. DISASSEMBLY
1-1. Back Cover/Rear Cabinet ..............cccccsccssssseessecsssessteneees 3
Tes o FrONt- PANO fccvcccocssccelsciecies covsseidecacedaticdavtces vecsvsdetesecovesouds 3
SECTION 2. DIAGRAMS
2-1. Circuit Boards Location ............cccsccccccscsssssseecescecssseserraeees 4
2-2. Semiconductor Lead Layout ....... ce ceecesseeseereeenseeenes 4
2-3. Schematic Diagram ..........cccssesssscesessssnssesscessaesssereeees 5
2-4. Printed Wiring Board oo... cc. cccesssscseesseensseeseseeeseesneaeeeeees A
SECTION 3. EXPLODED VIEWS
3-1. Cabinet Section oi ccesssscesreescesnscseceeseesenesensaeeees 10
BeBe VAMP SOCIO cesescascnicetssai vane veanscccsvatavasdshneveteccoccstacntavecevcsenss 11
SECTION 4. ELECTRICAL PARTS LIST.............0000.... 12
SAFETY-RELATED COMPONENT WARNING !!
COMPONENTS IDENTIFIED BY MARK A OR DOTTED
_LINE WITH MARK A. ON THE SCHEMATIC DIAGRAMS
AND IN THE PARTS LIST ARE CRITICAL TO SAFE
OPERATION. REPLACE THESE COMPONENTS WITH
SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
SAFETY CHECK-OUT
(US model only)
After correcting the original service problem, perform
the following safety checks before releasing the set to the
customer:
Check the antenna terminals, metal trim, “metallized”
knobs, screws, and all other exposed metal parts for AC
leakage. Check leakage as described below.
LEAKAGE
The AC leakage from any exposed metal part to earth
ground and from all exposed metal parts to any exposed
metal part having a return to chassis, must not exceed 0.5
mA (500 microampers). Leakage current can be measured
by any one of three methods.
1. A commercial leakage tester, such as the Simpson 229
or RCA WT-540A. Follow the manufacturers’
instructions to use these instruments.
2. A battery-operated AC milliammeter. The Data
Precision 245 digital multimeter is suitable for this
job.
3. Measuring the voltage drop across a resistor by means
of a VOM or battery-operated AC voltmeter. The
“limit” indication is 0.75 V, so analog meters must
have an accurate low-voltage scale. The Simpson 250
and Sanwa SH-63Trd are examples of a passive VOM
that is suitable. Nearly all battery operated digital
multimeters that have a 2V AC range are suitable.
(See Fig. A)
To Exposed Metal
Parts on Set
AC
(Saal voltmeter
(0.75V)
= Earth Ground
Fig. A. Using an AC voltmeter to check AC leakage.
ATTENTION AU COMPOSANT AYANT RAPPORT
A LA SECURITE!!
LES COMPOSANTS IDENTIFIES PAR UNE MARQUE A
SUR LES DIAGRAMMES SCHEMATIQUES ET LA LISTE
DES PIECES SONT CRITIQUES POUR LA SECURITE
DE FONCTIONNEMENT. NE REMPLACER CES.
COMPOSANTS QUE PAR DES PIECES SONY DONT
LES NUMEROS SONT DONNES DANS CE MANUEL OU
DANS LES SUPPLEMENTS PUBLIES PAR SONY.
—2—

SECTION 1
DISASSEMBLY
Note : Follow the disassembly procedure in the number order given.
1-1. BACK COVER/REAR CABINET
Four tappin
@
Rear
cabinet
assembly
©
Four
tapping
screws
@ Four tapping screws
(BVTP4x16)
© Removal the speaker
cord
connector.
@
Six
tapping
screws
(M4x16)
@ Back cover assembly
_
@
Connector
2P
(CN201
on
the
a
POWER
board)
©
Connector
2P
(EX100
:
AEP,
UK,
G/S900
:
US,
CND)
3P
(EX100
:
E,
AUS/S900
:
JE,
E)
(CN905
on
the
POWER
board)
\\
“..
@
Pull
out
the
speaker
cord
from
the
hole.
1-2. FRONT PANEL
@ Front panel assembly
@ Connector
(CN401 on the
c LED board)
Comes
@
Remove
the
four
catchers.
© Four tapping screws.

SECTION 2
DIAGRAMS
2-1. CIRCUIT BOARDS LOCATION
MAIN board
BIAS board
TRANSFORMER board
LED
board
POWER
board
2-2.
SEMICONDUCTOR
LEAD
LAYOUTS
RC5532DD
2SA1175-HFE
HZS16-2L
SEL3510C-CD
87
6
5
LETTER
SIDE
cathode
1234
(Top view)
anode
mow
oO.
wo”
anode cathode
STK401-100B
2SB1094-LK
RBA-402
1N4148M
2SD2012
CATHODE
ANODE
uPC1237HA
(2345678

SA-EX100/S900
2-3. SCHEMATIC DIAGRAM
1 2 3 4
A Co ee
[MAIN BOARD]
RIO
MFB ON (ry 470
MFB GNA|l_ |
ied R100
2.2k
CNId
SEQP
— I
D POWER
BOARD (2/2) dist mw gh
as Sf sionar ono f°
a ol .. Ut Rip
2
I
acs Rd hal
ne es cnlo2
C107 15008
R105 18k >
og
F NOTE
eAl{ capacitors are in pr unless otherwise noted. pr: pur
SOW or less are not indicated except for electrolytics
and tontalums,
* All resistors are in Q and 1/4W or less unless otherwise
specified,
* % sindicates tolerance,
G . iH :nonflammable resistor,
¢ -Wt =: fusible resistor.
e (_____] :pane! designation,
Note: Note:
The components identi- | Les composants identifiés par
fied by mark Axor dot-| une marque AN sont critiques
H ted tine with mark AN pour fa sécurité,
are critical for safety.| Ne les remplacer que par une
Replace only with part | pidce portant le numdro spéci-
number specified, fia,
e {Bt} :B+ Line,
« [B=] :B Line.
| * Voltages and waveforms are dc with respect fo ground
under no~signal conditions,
¢ Voltages are taken with o VOM(Input impedunce 10MQ).
Voltage variations may be noted due to normal produc
tion folerances,
HIGH PASS FILTER/ MIX-AMP
Abbreviation
CND:Conadian model,
G :German model,
AUS: Australian model,
JE :Tourist model,
* Signal path,
“AUDIO
aio1/io2 9900:4700 Sov
REG R143
10)
EX100:4800 SOV
$900:4700 SOV
11 12 13
wel
nw ry SP-H
gp DCT a (ee
ial
SILO SPgot
em SPEAKER
WOOFER
1C105
HPC1237HA
LAaSayoLny
ZHILV
o
g
al
v)
mm
a
w
m
4
13G GVO YSAC
Ww
SP302
ELECTROSTATIC
TWEETER
x
B
F101
F101,
F102
&
b
4
d
EX100:AEP,
UK,
G
MOBEL
4A
250V
lis
3
AX
EX100:E,
AUS
MOBEL
.3.15A
250V
=
? ?
$900
:US,CND
MOBEL
5A
125V
&
|
tok
Quigg
$900
+E,
JE
MOBEL 3.154
250V
=e
3
rm
-
ree)
-
——
-
——__
-
oles
O}F
oO
ale
ale]
2
Bales
ee
(CHASSIS)
alate
ti
[fe
6
6
4]
C4
Cb
i
pa
ial
1
3 BIAS
4700
1KV
47009
IRV
47008
TRV
ls
a
1s
ix
2
pS
repiaced
as
g
'
rae
BLOCK
|
ERA34-10
[ent
|
ig
-
&
@)
=
2 2
ERABS-104
ERAGA-10}
—
ERABE-10
4
ERAGA-1o
NUNIT,
so
saa
Col
irl
I
se
32
I
|
87
1
28
ae
‘
ERAS4~10
z
a
fof
P|
1
(ata
:
7
|
LED
RUNNY
’
47009
1xV4700R
1KV
47000
KY
47000.
IRV
|
|
T901 |
fe eS = ae POWER I |
|
|
|
TRANSFORMER
L_ ~~~ |
= TRANSFORMER ||
BOARD |
[eS Soa ye ee he nen hn RO Sas eee eee ee a
EX100;:EXCEPT E. AUS MODEL.
5900 EXCEPT E, JE MOBEL ee SET ere eee
AN Si | | A !
sstetan| a eee TRANSFORMER |
ea | 4
110V-120V I
Lee THANSEORMER ]|
1 A [powER BOARD — |
| BOARD (1/2) 3 |
byes iene oc eee ee ee ee el lh oe ey 4
EX100:E, AUS MODEL
§900 :E, JE MOSEL
ca
2200p 6kV

2-4. PRINTED WIRING BOARD
« See page 4 for Circuit Boards Location.
* See page 4 for Semiconductor Lead Layouts.
a
I
GO
NN
SR”
RR
C-NMR
[T/A
|
SR
(1
GS
|
De
(A
|
SP
ee
RC
(BIAS BLOCK is replaced as a unit)
[BIAS BLOCK]
CNS
09
SP902
ELECTROSTATIC
TWEETER
1-654-253-
[MAIN BOARD
SPEAKER WOOFER
[POWER BOARD]
NOTE
o—— parts extracted from fhe component side,
72 Pattern from the side which enable seeing,
Abbreviation
AUS: Austration model,
JE :Tourist model,
$900 :E,JE MODEL
T90I
POWER
TRANSFORMER
EX100:E,AUS MODEL
i-654-251- ()]
SA-EX100/S900
« Semiconductor
Location
Peo. aio
mom
[e0)
2
—_ Cc
oes ~“N
on
—
aN
om>o
Onn
ao
oO

NOTE:
¢ Items marked “ * ” are not stocked since they are
seldom required for routine service. Some delay
should be anticipated when ordering these items.
¢ Abbreviation
CND : Canadian model
G : German model
AUS : Australian model
JE — : Tourist model
3-1. CABINET SECTION
SECTION 3
EXPLODED VIEWS
* -XX, -X mean standardized parts, so they may
have some difference from the original one.
¢ The mechanical parts with no reference number
in the exploded views are not supplied.
e Hardware (# mark) list and accessories and
packing materials are given in the last of this
parts list.
Ref. No. Part No. Description Remark | Ref. No.
1 X-4945-291-1 FRAME ASSY, GRILLE 8
Z 4-912-253-01 CATCHER 8
3 X-4945-290-1 PANEL ASSY, FRONT (EX100/S900: JE, E) *9
3 X-4945-541-1 PANEL ASSY, FRONT (S900:US, CND) * 9
x4 1~654-253-11 LED BOARD 10
*5 X-4945-293-1 RING ASSY, WOOFER 11
k 6 A-4361-186-A CABINET ASSY, SPEAKER (EXCEPT EX100:G) SP901
* 6 A-4361-310-A CABINET ASSY, SPEAKER (EX100:G) SP902
x7 1-654-252-11 POWER BOARD
8 X-4945-731-1 COVER ASSY, BACK (EX100:AEP, UK, G) SP902
Part No.
The components identified by mark
A\ or dotted line with mark A\ are
critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque \ sont critiques pour la
sécurité.
Ne les remplacer que par une piéce
portant le numéro spécifié.
AMP Section
not supplied
Description Remark
X-4945-860-1 COVER ASSY, BACK (S900:US, CND)
X-4945-861-1 COVER ASSY, BACK (EX100:E, AUS/S900: JE, E)
X-4945-292-1 CABINET ASSY, REAR (EX100/S900: JE, E)
X-4945-542-1 CABINET ASSY, REAR (S900:US, CND)
4-962-063-01 SCREW
4-923-040-11 SCREW (4X16), TAPPING
1-504-671-11 SPEAKER (WOOFER) (15cm)
1-504-680-11 SPEAKER (TWEETER) (2. 2X10)
(EX100/S900: JE, E)
1-504-680-21 SPEAKER (TWEETER) (2. 2X10) (S900:US, CND)

3-2. AMP SECTION
56 F102
#4
F101
g not supplied 51
not supplied re ~~
# 4 Pf
not supplied
T901
not supplied not supplied
not supplied
ad
not supplied
hee
ii
EX100
:
AEP,
UK,
G,
E/S900
:
E,
JE
The components identified by mark
A\ or dotted line with mark A\ are
critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque A\ sont critiques pour la
sécurité,
Ne les remplacer que par une piéce
portant le numéro spécifié.
Ref. No. Part No. Description Remark | Ref.No. Part No. Description Remark
51 4-959-869-01 SCREW (STEP) (M3X6) AF101 1-533-420-11 FUSE, GLASS CYLINDRICAL (DIA. 5)
* 52 1-654-251-11 TRANSFORMER BOARD (5A 125V) (S900:US, CND)
53 A-4361-196-A BIAS BLOCK ASSY (EX100/S900: JE, E) AXF102 = 1-532-237-00 FUSE, TIME LAG (3. 15A 250V
53 A-4361-296-A BIAS BLOCK ASSY (S900:US, CND) (EX100:E, AUS/S900: JE, E)
x 54 A-4377-583-A MAIN BOARD, COMPLETE (EX100) A\F102 1-532-350-00 FUSE (4A 250V) (EX100: AEP, UK, G)
AF102 1-533-420-11 FUSE, GLASS CYLINDRICAL (DIA. 5)
* 54 A-4377-584-A MAIN BOARD, COMPLETE (S900) (5A 125V) (S900:US, CND)
* 55 4-941-563-01 BUSHING A\T901 =: 1-427-744-11 TRANSFORMER, POWER (S900:US, CND)
56 3-703-044-26 LABEL, CAUTION (S900:US, CND)
AF101 1-532-237-00 FUSE, TIME LAG (3. 15A 250¥) T901 | 1-427-745-11 TRANSFORMER, POWER (EX100:AEP, UK, G)
(EX100:E, AUS/S900: JE, E) T901 1-427-746-11 TRANSFORMER, POWER
AF101 1-532-350-00 FUSE (4A 250V) (EX100: AEP, UK, G) - (EX100:E, AUS/S900: JE, E)

NOTE:
The components identified by mark
A\ or dotted line with mark A\ are
critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque A\ sont critiques pour la
sécurité.
Ne les remplacer que par une piéce
SECTION 4
ELECTRICAL PARTS LIST
« Due to standardization, replacements in the parts
list may be different from the parts specified in
the diagrams or the components used on the set.
¢ Items marked “*” are not stocked since they are
seldom required for routine service. Some delay
should be anticipated when ordering these items.
¢ Abbreviation
CND_: Canadian model
G : German model
AUS _ : Australian model
¢ RESISTORS
All resistors are in ohms
METAL: Metal-film resistor
METAL OXIDE: Metal Oxide-film resistor
F : nonflammable
¢ SEMICONDUCTORS
In each case, u: uw , for example:
UA...: WA..., UPA...: @PA..., UPB...: @ PB...,
uPC...: wPC..., uPD...: PD...
¢ CAPACITORS
portant le numéro spécifié. JE : Tourist model uF: uF
¢ COILS
When indicating parts by reference uH : #H
number, please include the board
name.
Ref.No. Part No. Description Remark | Ref.No. Part No. Description Remark
x 1-654-253-11 LED BOARD C126 =1-124-927-11 ELECT 4, TuF 20% 100V
KEKEKEKEE C127. ~=—- 1-136-165-00 FILM 0. luF 5% 50V
< CONNECTOR > C128 =1-136-165-00 FILM 0. luF 5% 50V
C129 = 1-124-910-11 ELECT ATuF 20% 50V
CN401 1-564-517-11 PLUG, CONNECTOR 2P C130 =©1-124-910-11 ELECT 4TuF 20% 50V
C131 = =.1-124-443-00 ELECT 100uF 20% 10V
< DIODE > C132 =. 1-124-443-00 ELECT 100uF 20% 10V
D106 =. 8-719-018-46 DIODE SEL3510C-CD C133. =. 1-136-165-00 FILM 0. luF 5% 50V
C134 =: 1-136-165-00 FILM 0. luF 5% 50V
KEKAEKEKAKEKK REAR EEE AR EER EEE ERR EE EARS EERAEE EAA ES ERA ER ERE EE RES C147 =: 1-124-927-11 ELECT 4. TuF 20% 100V
C151 1-136-159-00 FILM 0.033uF 5% 50V
* A~4377-583-A MAIN BOARD, COMPLETE (EX100) C152 1-136-159-00 FILM 0.033uF 5% 50V
KEREKEREKEEEERE REE REE EERE EES
C153 = 1-130-488-00 MYLAR 0.027uF 5% 50V
* A-4377-584-A MAIN BOARD, COMPLETE (S900) C155 =: 1-130-479-00 MYLAR 0.0047uF 5% 50V
HERKEKERERKAREAEEERES ERASE ES C161 1-136-166-00 FILM 0. 12uF 5% 50V
C162 1-136-167-00 FILM 0. 15uF 5% 50V
1-533~-293-11 FUSE HOLDER C163 = 1-130-484-00 MYLAR 0.012uF 5% 50V
< CAPACITOR > C301 = =1-136-171-00 FILM 0. 33uF 5% 50V
C302 =1-136-163-00 FILM 0.068uF 5% 50V
C101 1-136-166-00 FILM 0. 12uF 5% 50V C303 1-130-488-00 MYLAR 0.027uF 5% 50V
C103. =: 1-136-162-00 FILM 0.056uF 5% 50V C304 = 1-130-475-00 MYLAR 0.0022uF 5% 50V
C105 1-136-163-00 FILM 0.068uF 5% 50V C306 1-110-337-51 MYLAR 150PF 5% 50V
C107 ~=1-130-473-00 MYLAR 0. 0015uF 5% 50V
C110. =. 1-126-012-11 ELECT 470uF 20% 16V C307 ~=—1-130-478-00 MYLAR 0.0039uF 5% 50V
C308 1-130-477-00 MYLAR 0. 0033uF 5% 50V
C111. =: 1-126-012-11 ELECT 470uF 20% 16V C309 =1-130-477-00 MYLAR 0. 0033uF 5% 50V
C112 = 1-136-169-00 FILM 0. 22uF 5% 50V
C113 ~=1-130-469-00 MYLAR 680PF 5% 50V < CONNECTOR >
C114 =: 1-136-165-00 FILM 0. luF 5% 50V
C115 = 1-124-910-11 ELECT ATuF 20% 50V CN101 1-566-693-11 PIN, CONNECTOR 2P
CN102 1-564-506-11 PLUG, CONNECTOR 3P
C116 =. 1-124-122-11 ELECT 100uF 20% 50V (EX100) CN103 1-565-395-11 PIN, CONNECTOR 3P
C1l16)=—- 1-124-478-11 ELECT 100uF 20% 25V (S900) CN108 1-564-517-11 PLUG, CONNECTOR 2P
C117. ~—s- 1-130-469-00 MYLAR 680PF 5% 50V CN110 1-564-214-11 PIN, CONNECTOR 3P
Cil8 = =1-136-165-00 FILM 0. luF 5% 50V
C119 =: 1-124-910-11 ELECT ATuF 20% 50V CN111 1-566-693-11 PIN, CONNECTOR 2P
C120) ~=.1-136-165-00 FILM 0. luF 5% 50V < DIODE >
C121 = 1-136-165-00 FILM 0. luF 5% 50V
C122) ~=1-110-667-11 ELECT 6800uF 50V (EX100) D101 8-719-312-09 DIODE RBA-402
C122) =1-126-138-11 ELECT 4700uF 20% 50V (S900) D103 8-719-987-63 DIODE 1N4148M
C123) =: 1-110-667-11 ELECT 6800uF 50V (EX100) D104 8-719-987-63 DIODE 1N4148M
D107 ~=8-719-933-88 DIODE 4HZS16-2L
C123) =: 1-126-138-11 ELECT 4700uF 20% 50V (S900) D108 8~719-933-88 DIODE 4HZS16-2L
C124 ~=1-124-122-11 ELECT 100uF 20% 50V
C125 = 1-124-122~11 ELECT 100uF 20% 50V D147 =8-719-987-63 DIODE 1N4148M

Ref.No. Part No. Description Remark | Ref.No. Part No. Description Remark
< GROUND PLATE > R130 1-249-397-11 CARBON 22 5% 1/4¥ F
R131 1-249-397-11 CARBON 22 5% 1/4¥ F
* EPT101 4-870-539-00 PLATE, GROUND
R133: 1-249-431-11 CARBON 15K «5% 1/4¥
< FUSE > R134 1-249-429-11 CARBON 10K 5% 1/44
R135 1-249-441-11 CARBON 100K 5% 1/4¥
AF101 = 1-532-237-00 FUSE, TIME LAG (3. 15A 250V) R136 1-249-437-11 CARBON ATK 5% 1/4¥
(EX100:E, AUS/S900:E, JE) R137 = 1-249-430-11 CARBON 12K 5% 1/4¥
AF101 —1-532-350-00 FUSE, (4A 250V) (EX100:AEP, UK, G)
A\F101 1-533-420-11 FUSE, GLASS CYLINDRICAL (DIA. 5) R141 1-249-427-11 CARBON 6. 8K 5% 1/4¥ F
(5A 125V) (S900:US, CND) R142 1-208-960-11 METAL PLATE 3.3 BW
A\F102 1-532-237-00 FUSE, TIME LAG (3. 15A 250V) A\R143 =: 1-215-914-11 METAL OXIDE 330 35% 3 F
(EX100:E, AUS/S900:E, JE) | A\R144 =: 1-215~914-11 METAL OXIDE 330 95% 3¥ F
AF102 1-532-350-00 FUSE, (4A 250V) (EX100:AEP, UK, G) R145 =1-249-421-11 CARBON 2.2K 5% 1/4¥ F
A\F102 —1-533-420-11 FUSE, GLASS CYLINDRICAL . (DIA. 5) R146 =: 1-249-421-11 CARBON 2.2K 5% 1/4¥ F
(5A 125V) (S900:US, CND) R147 —- 1-249-429-11 CARBON 10K 5% 1/4¥
, R148 = 1-249-429-11 CARBON 10K 5% 1/44
< IC > R149 =1-249-419-11 CARBON 1.5K 5% 1/4¥ F
R151 1-247-881-00 CARBON 120K 5% 1/44
IC101 8-759-982-03 IC RC5532DD
C104 8-749-924-68 IC STK401-100B R153: 1-247-862-11 CARBON 20K 5% 1/4¥
IC105 8-759-111-68 IC uPC1237HA R161 1-247-866-11 CARBON 30K 5% 1/44
1C301 8-759-982-03 IC RC5532DD R162 1-249-432-11 CARBON 18K 5% 1/44
R163 1-247-840-00 CARBON 2.4K 5% 1/4¥
< TRANSISTOR > R164 1-249-436-11 CARBON 39K 5% 1/4¥
Q101 8-729-209-15 TRANSISTOR 2SD2012 R165 1-247-888-11 CARBON 240K 5% 1/4¥
Q102 8-729-141-83 TRANSISTOR 2SB1094-LK A\R166 =: 1-212-942-00 FUSIBLE 2.2 5% 1/2W F
Q147. 8-729-119~-76 TRANSISTOR 2SA1175-HFE R301 1-249-431-11 CARBON 15K 5% 1/4¥
R302 1-249-424-11 CARBON 3.9K 5% 1/4¥ F
< RESISTOR > R303 1-249-424-11 CARBON 3.9K 5% 1/4¥ F
R100 1-249-421-11 CARBON 2.2K 5% 1/4¥ F R304 1-249-424-11 CARBON 3.9K 5% 1/4¥ F
R101 1-249-413-11 CARBON 470 5% 1/4¥ F R306 1-247-898-11 CARBON 620K 5% 1/4¥
R102 1-247-895-00 CARBON AT0K 5% 1/4¥ R307 1-249-431-11 CARBON 15K 5% 1/44
R103 1~249-417-11 CARBON 1K 5% 1/4 F R308 1-249-427-11 CARBON 6.8K 5% 1/4¥ F
R104 1-249-437-11 CARBON 47K 5% 1/4¥ R310 1-249-401-11 CARBON 47 5% 1/4¥ F
R105 1-249-432-11 CARBON 18K 5% 1/4¥ R516 1-249-401-11 CARBON 47 5% 1/4¥ F
R106 1-249-438-11 CARBON 56K 5% = /4¥
R107 1-249-436-11 CARBON 39K 5% 1/4¥ < RELAY >
R108 1-249-433-11 CARBON 22K 55% 1/4¥
R114 = 1-249-419~-11 CARBON 1.5K 5% 1/49 F RY101 1-515-920-11 RELAY (24¥)
R115 1-249-420-11 CARBON 1.8K 5% 1/4¥ F ro FFF FFF FSsssrrsisr torts sss sists sets ites itss ss ssr ets sre t sissy ss
R117 =: 1-249-427-11 CARBON 6.8K 5% 1/4¥ F
R118 1-249-436-11 CARBON 39K 5% 1/4¥ t 1-654-252-11 POWER BOARD
R119 1-249-436-11 CARBON 39K 5% 1/4¥ EEEEERELEEE
AR120 =: 1-212-982-00 FUSIBLE 100 5% 1/2¥ F
< CAPACITOR >
R121 1-249-420-11 CARBON 1.8K 5% 1/4¥ F
R123. 1-249-436-11 CARBON 39K 5% 1/4¥ C201 = 1-162-282-31 CERAMIC 100PF 10% 50V
‘R124 = 1-249-436-11 CARBON 39K 5% 1/4¥ AXC901 ~=—:1-161-743-00 CERAMIC 0. 0047uF 400V
A\R125 =: 1-212-982-00 FUSIBLE 100 = 5% 1/2¥ F AC902 =: 1-161-743-00 CERAMIC 0. 0047uF 400V
R126 1-249-439-11 CARBON 68K 5% 1/49 (EX100:E, AUS/S900:E, JE)
R127 =1-249-397-11 CARBON 22 5% 1/4¥ F < CONNECTOR >
R128 1-249-397-11 CARBON 22 5% 1/44 F
R129 1~249-437-11 CARBON ATK 5% 1/4¥ CN201 1-564-506-11 PLUG, CONNECTOR 3P
The components identified by mark | Les composants identifiés par une
A\ or dotted line with mark A\ are | marque A\ sont critiques pour la
critical for safety. sécurité.
Replace only with part number | Ne les remplacer que par une piéce
specified. portant le numéro spécifié.

SA-EX100/S900
TRANSFORMER
Ref.No. Part No. Description Remark
A\CN902 1-526-930-11 INLET, AC (AC IN) (S900)
A\CN902 = 1-526-931-11 INLET, AC (AC IN) (EX100)
CN905 1-564-321-00 PIN, CONNECTOR 2P
(EX100: AEP, UK, G/S900:US, CND)
CN905 1-564-687-11 PIN, CONNECTOR 3P
(EX100:E, AUS/S900:E, JE)
< JACK >
J201 1-750-969-11 JACK, PIN (INPUT)
< SWITCH >
A\S901 = 1-572-675-11 SWITCH, POWER VOLTAGE CHANGE
(VOLTAGE SELECTOR) (EX100:E, AUS/S900:E, JE)
ARERR RRA RR ARERR EERE REE RE REE RETR EERE ERE E REE R EE ER ERE ERE
* 1-654-251-11 TRANSFORMER BOARD
RERKRKEREREREREEE
< CONNECTOR >
CN903
CN904
1-568-226-11 PIN, CONNECTOR 2P
1-769-292-31 LEAD (WITH CONNECTOR) (3 CORE)
(EX100:E, AUS/S900:E, JE)
1-690-123-31 REED (WITH CONNECTOR) (2 CORE)
(EX100: AEP, UK, G/S900:US, CND)
CN904
< TRANSFORMER >
A\T901 — 1-427-744-11 TRANSFORMER, POWER (S900:US, CND)
A\T901 —-1-427-745-11 TRANSFORMER, POWER (EX100:AEP, UK, G)
A\T901 =: 1-427-746-11 TRANSFORMER, POWER
(EX100:E, AUS/S900:E, JE)
KEKEKERK KEELER EKER EERE REE ER ERE RARER ERASER ERE ERE ER EEE REEE RES
Ref.No. Part No. Description Remark
A\T901_ —- 1-427-746-11 TRANSFORMER, POWER
(EX100:E, AUS/S900:E, JE)
REKEERERERESEEREEEEREREE SER ERE REE RES ERE RE EAE ERA REESE ERE EEE SES
ACCESSORIES & PACKING MATERIALS
KRKKERERER EEE RAR ERELEREEERE RES
1-575-706-31 CORD,
1-765-293-11 CORD,
1-769-312-11 CORD,
1-769-329-11 CORD,
1-769-459-11 CORD,
POWER (S900:US, CND)
POWER (EX100: AEP, E, G, AUS)
POWER (EX100:UK)
CONNECTION (PIN-PIN) (2. 5m)
POWER (S900:E, JE)
> PPE
3-701-940-01 LABEL, BEAB (EX100:UK)
3-798-348-11 MANUAL, INSTRUCTION
(ENGLISH, FRENCH, SPANISH, PORTUGUESE,
GERMAN, DUTCH, SWEDISH, ITALIAN, CHINESE,
KOREAN, ARABIC)
* 4-971-160-01 CUSHION (UPPER)
4~971-161-01 CUSHION (LOWER)
4-972-595-01 INDIVIDUAL CARTON (EX100:AEP, UK, G, AUS)
«e
4-972-596-01 INDIVIDUAL CARTON (EX100:E)
4-973-623-01 INDIVIDUAL CARTON (S900:US, CND)
4-973-624-01 INDIVIDUAL CARTON (S900: JE)
4~973-625-01 INDIVIDUAL CARTON (S900:E)
ae HM HM
REREEEEAERERE EERE EERESER ES EERERERERERE SERRE EERE ERER EAE EEE EELS
KEKEEEESEERR EERE ES
HARDWARE LIST
KEKEKEEEERESELER ESS
#1 7-621-849-50 SCREW, WOOD +R 4. 1X40
7-685-134-19 SCREW +P 2.6X8 TYPE2 NON-SLIT
#3 7-685-147-19 SCREW +P 3X10 TYPE2 NON-SLIT
#4 7-682-548-04 SCREW +BVIT 3X8 (S)
#5 7-685-163-01 SCREW +P 4X16 TYPE]
MISCELLANEOUS
HEKEEEEEKEERE #6 7-685-650-79 SCREW +BVIP 3X16 TYPE2 IT-3
#7 7-685-663-79 SCREW +BVITP 4X16 TYPE2 IT-3
AF101 — 1-532-237-00 FUSE, TIME LAG (3.15A 250V) — #8 7-685-647-79 SCREW +BVIP 3X10 TYPE2 IT-3
' (EX100:E, AUS/S900:E, JE) #9 7-682-549-04 SCREW +BVIT 3X10 (S)
A\F101 — 1-532-350-00 FUSE (4A 250V) (EX100: AEP, UK, G)
A\F101 — 1-533-420-11 FUSE, GLASS CYLINDRICAL (DIA. 5)
(5A 125V) (S900:US, CND)
A\F102 1-532-237-00 FUSE, TIME LAG (3. 15A 250V)
(EX100:E, AUS/S900:E, JE)
A102 1-532-350-00 FUSE (4A 250¥) (EX100:AEP, UK, G)
A\F102 1-533-420-11 FUSE, GLASS CYLINDRICAL (DIA. 5)
(5A 125V) (S900:US, CND)
SP901 1-504-671-11 SPEAKER (WOOFER) (15cm)
SP902 1-504-680-11 SPEAKER (TWEETER) (2. 2X10)
(EX100/S900:E, JE) | | The components identified by mark | Les composants identifiés par une
SP902 1-504-680-21 SPEAKER (TWEETER) (2. 2X10) (S900:US, CND) A\ or dotted line with mark A\ are | marque A\ sont critiques pour la
A\T901_ — 1-427-744-11 TRANSFORMER, POWER (S900:US, CND) critical for safety. sécurité.
Replace only with part number | Ne les remplacer que par une piéce
A\T901 —1-427-745-11 TRANSFORMER, POWER (BX100:AEP, UK, G) See paren ene ee
English
: 95A091 10-1
Sony Corporation Printed in Japan
Consumer A&V Products Company © 1995. 1
9-959-953-11 Home A&V Products Div. Published by Home A&V Products Div.
Quality Engineering Dept.
—— 14 —