Sony HCD-S3000 User manual

HCD-S3000
US Model
Canadian Model
SERVICE MANUAL
COMPACT Hi-Fi STEREO SYSTEM
MICROFILM
SPECIFICATIONS
HCD-S3000 is the tuner, deck, CD and
amplifier section in LBT-S3000.
Model Name Using Similar Mechanism HCD-G2500
CD Mechanism Type 5CD DISC
Base Unit Type KSM-213ECM
Optical Pick-up Type KSS-213ECM/C2NP
Model Name Using Similar Mechanism NEW
Tape Transport Mechanism Type CWL-44-RR
CD
SECTION
TAPE
DECK
SECTION
Manufactured under licensefromDolbyLaboratories
Licensing Corporation.
“DOLBY”andthedouble-Dsymbolaare trademarks
of Dolby Laboratories Licensing Corporation.
U.S and foreign patents licensed from Dolby
Laboratories Licensing Corporation.
— Continued on next page —
(For the U.S model)
AUDIO POWER SPECIFICATIONS:
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 6 Ωloads both channels driven, from 70 –
20,000 Hz; rated 70 W per channel minimum RMS
power, with no more than 0.9% total harmonic
distortion from 250 mW to rated output.
Amplifier section
Continuous RMS power output
80W + 80W
(6 Ωat 1 kHz, 10%
THD)
Total harmonics distortion Less than 0.07%
(6 Ωat 1 kHz, 35W)
Inputs
PHONO IN (phono jack):
sensitivity 3mV,
impedance 47 kΩ
MD/VIDEO IN (phono jacks):sensitivity 250mV,
impedance 47 kΩ
Outputs
PHONOS (stereo phono jacks):
accepts headphones of
8 W or more
MD/VIDEO OUT (phone jack):
voltage 250mV,
impedance 1 kΩ
SPEAKER: accepts impedance of
6 to 16 Ω
CD player section
System Compact disc and digital
audio system
Laser Semiconductor laser
(λ= 780 nm)
Emission
duration: continuous
Laser output Max. 44.6µW*
*This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pock-up
Block with 7 mm
aperture.
Wavelength 780 – 790 nm
Frequency response 20Hz – 20kHz (±0.5 dB)
Signal-to-noise retio More than 90 dB
Dynamic range More than 90 dB
DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength 600 nm
Output Level –18 dBm
Tape deck section
Recording system 4-track 2-channel stereo
Frequency response (DOLBY NR OFF)
60 – 13,000 Hz (±3 dB),
using Sony TYPE I
cassette
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tunr section
Tuning range 87.5 – 108.0 MHz
(100 kHz step)
AM tuner section
Tuning renge 530 – 1,710 kHz
(with the tuning interval
set at 10 kHz)
Antenna AM loop antenna
External antenna
terminal
Intermediate frequency 450 kHz

HCD-S3000
5-4. SCHEMATIC DIAGRAM MAIN (1/3) SECTION
— 23 — — 24 —
• Refer to page 16 for Waveform. • Refer to page 45 for IC Block Diagrams.

HCD-S3000
5-5. SCHEMATIC DIAGRAM MAIN (2/3) SECTION
— 25 — — 26 —
• Refer to page 16 for Waveform. • Refer to page 21 for Printed Wiring Board.

HCD-S3000
5-6. SCHEMATIC DIAGRAM MAIN (3/3) SECTION
— 27 — — 28 —
• Refer to page 21 for Printed Wiring Board. • Refer to page 45 for IC Block Diagrams.

HCD-S3000
5-8. SCHEMATIC DIAGRAM AMP SECTION
— 31 — — 32 —
• Refer to page 46 for IC Block Diagram.
2.0A 250V
The components identified by
mark !or dotted line with mark
!are critical for safety.
Replace only with part number
specified.
Les composants identifiés par
une marque !sont critiques
pour la sécurité.
Ne les remplacer que par une
pièceportant le numérospécifié.

HCD-S3000
5-10. SCHEMATIC DIAGRAM CD DECORD SECTION
— 35 — — 36 —
• Refer to page 16 for Waveforms.
CM/C2NP
The components identified by
mark !or dotted line with mark
!are critical for safety.
Replace only with part number
specified.
Les composants identifiés par
une marque !sont critiques
pour la sécurité.
Ne les remplacer que par une
pièceportant le numérospécifié.

HCD-S3000
5-12. SCHEMATIC DIAGRAM FRONT (1/2) SECTION
— 39 — — 40 —
• Refer to page 16 for Waveform. • Refer to page 43 for IC Pin Function Description. • Refer to page 46 for IC Block Diagrams.

HCD-S3000
5-13. SCHEMATIC DIAGRAM FRONT (2/2) SECTION
— 41 — — 42 —
• Refer to page 37 for Printed Wiring Board.