Sony MHC-WX7AV User manual

©1999 by Sony Corporation
Mini Hi-Fi
Component
System
Operating Instructions
3-867-706-11(1)
MHC-WX7AV
MHC-WX5
f

2
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
CAUTION
Do not, under any circumstances, place the CD
player/stereo cassette deck on top of the A/V
control amplifier.
Laser component in this product is capable of
emitting radiation exceeding the limit for Class 1.
This stereo sytem is equipped with the Dolby* B-
type noise reduction system.
* Dolby noise reduction manufactured under license
from Dolby Laboratories Licensing Corporation.
“DOLBY”, the double-D symbol aand “PRO
LOGIC” are trademarks of the Dolby Laboratories
Licensing Corporation.
The MHC-WX7AV consist of the following
components:
– A/V control amplifier STR-WX7
– CD player/Stereo cassette deck HTC-WX5
– Speaker system
• Front speaker SS-WX7
• Center speaker SS-CN50G
• Rear speaker SS-SR50G
The MHC-WX5 consist of the following
components:
– A/V control amplifier STR-WX5
– CD player/Stereo cassette deck HTC-WX5
– Speaker system
• Front speaker SS-WX7
This appliance is classified
as a CLASS 1 LASER
product. The CLASS 1
LASER PRODUCT
MARKING is located on
the rear exterior.
About this manual
The instructions in this manual are for
MHC-WX7AV/WX5. MHC-WX7AV is the
model used for illustration purposes. The
location of some buttons on MHC-WX5 is
different from that of MHC-WX7AV, but the
name of the buttons are the same.

3
Table of Contents
Getting Started
Step 1: Hooking up the main unit....... 4
Step 2: Setting up your speakers .......... 6
Step 3: Setting the time ....................... 10
Step 4: Presetting radio stations ........ 11
Connecting optional AV components
.......................................................... 12
Basic Operations
Playing a CD ......................................... 14
Recording a CD .................................... 15
Listening to the radio........................... 16
Recording from the radio .................... 18
Playing a tape........................................ 19
Recording from a tape ......................... 21
The CD Player
Using the CD display........................... 22
Playing the CD tracks repeatedly ...... 22
Playing the CD tracks in random order
.......................................................... 23
Programming the CD tracks ............... 24
Playing CDs without interruption ..... 25
The Tape Deck
Recording on a tape manually ........... 26
Recording a CD by specifying track
order ................................................ 27
DJ Effects
Looping part of a CD ........................... 29
Flashing part of a CD ........................... 29
Sound Adjustment
Adjusting the sound ............................ 30
Selecting the audio emphasis ............. 31
Selecting the surround effects ............ 32
Enjoying the Dolby Pro Logic Surround
sound ............................................... 33
Making a personal audio emphasis file
.......................................................... 34
Other Features
Singing along: Karaoke ...................... 36
Falling asleep to music ........................ 37
Waking up to music ............................. 38
Timer-recording radio programs ....... 39
Additional Information
Precautions ............................................ 40
Troubleshooting ................................... 41
Specifications ........................................ 44
Remote identification........................... 46
Index....................................... Back Cover

4
FM 75Ω
AM
Step 1: Hooking up the main unit
Getting Started
Do the following procedure 1to 2to hook up your system using the supplied cords and
accessories.
If you set up the stereo system vertically
Be sure to place the A/V control amplifier on top of the CD player/stereo cassette deck.
2Connect the FM/AM antennas.
Set up the AM loop antenna, then
connect it.
Extend the FM lead
antenna horizontally.
1Connect the flat cord to the SYSTEM
CONTROL connectors until it clicks.
To disconnect AM loop antenna
FM antenna
AM loop antenna
12

5
Inserting two size AA (R6)
batteries into the remote
For MHC-WX7AV
For MHC-WX5
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
When carrying this system
Do the following to protect the CD
mechanism.
1Press FUNCTION repeatedly until “CD”
appears in the display.
2Hold down LOOP and press (power)
so that “LOCK” appears in the display.
3Unplug the power cord.
]
}
]
}
}}
]
]

6
2Place the center speaker so it is
placed at about the same height as
the front speakers (A). Align the
center speaker with the front
speakers or place it slightly back
from the position of the front
speakers (B).
3Place the rear speakers facing each
other at about 60 to 90 cm above
your listening position.
BCenter speaker
A
Rear speaker
60 to 90cm
Step 2: Setting up
your speakers
(MHC-WX7AV only)
Connecting the supplied rear and center
speakers enables you to fully enjoy Dolby Pro
Logic Surround sound. Dolby Pro Logic
Surround is a decoding system standardized
in TV programs and movies. Dolby Pro Logic
Surround improves sound image by using
four separate channels. These channels
manipulate the sound to be heard and
enhance the action as it happens on the
screen.
Positioning the speakers
Before you connect them, determine the best
location for your speakers.
1Place the front speakers at an angle
of 45 degrees from your listening
position.
Center speaker
45°
Front
speaker
(L)
Rear
speaker
(L)
Front
speaker
(R)
Rear
speaker
(R)

7
11
5
4
23
6
1
Connecting the speakers
1Connect the front speakers.
Connect the speaker cords to the FRONT
SPEAKER jacks of the same color.
Keep the speaker cords away from the
aerials to prevent noise.
* The color of your speaker cords might be different.
See the speakers’ manual for details if supplied.
continued
Left front speaker
Insert only the stripped portion. Insert only the stripped portion.
Black (’)Red (‘)
2Connect the rear speakers (supplied
for MHC-WX7AV only).
Connect the speaker cords to the REAR
SPEAKER jacks of the same color.
Keep the speaker cords away from the
aerials to prevent noise.
* The color of your speaker cords might be different.
See the speakers’ manual for details if supplied.
Right front speaker
Black* (’)
Grey* (‘)
Right rear speaker Left rear speaker
Center speaker
R
L
+
‘
’
RL
‘
’

8
Step 2: Setting up your speakers
(continued)
3Connect the center speaker
(MHC-WX7AV only).
Connect the speaker cords to the
CENTER SPEAKER jacks of the same
color.
Keep the speaker cords away from the
aerials to prevent noise.
* The color of your speaker cords might be different.
See the speakers’ manual for details if supplied.
4Set VOLTAGE SELECTOR to
position of your local power line
voltage (except for China, Thailand,
Korea, and Australian models).
5Connect the power cord to a wall
outlet.
Demo mode appears in the display.
If the plug on this unit does not fit
your wall outlet, detach the supplied
adapter from the plug (except for
Australia and Malaysia).
6Deactivate the demo mode by
pressing DISPLAY/DEMO when
the system is turned off.
The demo mode is also deactivated
when you set the time.
To activate the automatic sliding
panel
Press OPEN/CLOSE to slide the panel. Press
OPEN SENSOR ON/OFF button, so that
AUTO indicator lights up. When you stand
within 30 cm from the panel, the panel slides
down automatically.
The panel closes automatically if you do not
operate on or in the panel for about 30
seconds.
To attach the front speaker pads
Attach the supplied front speaker pads to the
bottom of the speakers to stabilize the
speakers and prevent them from slipping.
EQ
SLIDING SENSOR OPEN/CLOSE
OPEN SENSOR ON/OFF
AUTO indicator
R
L
‘
’
+
–
Grey* (‘)
Black* (’)
Insert only the stripped portion.

9
Adjusting the speaker
volume (MHC-WX7AV
only)
To enjoy Dolby Pro Logic Surround sound,
adjust the volume of each speaker.
n
1Press PROLOGIC (or PROLOGIC
ON/OFF on the remote)
“PROLOGIC ON” appears.
2Press T. TONE ON/OFF on the
remote.
The test tone is heard from the speakers
in the following order. Adjust the
volume of the test tone.
Front (left) nCenter nFront (right)
Rear
3From your listening position, press
CENTER LEVEL (+/–) and REAR
LEVEL (+/–) on the remote to
adjust the volume.
The volume levels from each speaker
must become the same.
4Press T. TONE ON/OFF when you
are done adjusting.
The test tone is turned off.
Tips
• If you turn VOLUME (or press VOLUME +/– on
the remote) all the speaker volumes change.
• If Test Tone turns-off automatically, press TEST
TONE ON/OFF to continue.
Note
The test tone feature works only for Dolby Pro Logic
Surround sound.
PROLOGIC
CD

VOLUME +/–
T. TONE ON/OFF
PROLOGIC ON/OFF
REAR LEVEL +/–
CENTER LEVEL +/–
4
$
4
$
)0P
P
+=p
p
·
·ª
·
·
ª

10
You must set the time before using the timer
functions.
1Press CLOCK/TIMER SET.
The hour indication flashes.
2Turn the jog dial to set the hour.
The clock is on a 12-hour system.
3Press ENTER/NEXT.
The minute indication flashes.
4Turn the jog dial to set the minute.
5Press ENTER/NEXT.
The clock starts working.
Tips
• If you’ve made a mistake, start over from step 1.
• Setting the time deactivates the demo mode.
If you want to display the demo mode, press
DISPLAY/DEMO when the power is off.
Step 3: Setting the
time
ß
RELAY
DAILY 1 2 REC SLEEP
DOLBY NR
PROGRAM
REPEAT1
SHUFFLE
ALL DISCS1
TUNED
MONO
STEREO
SYNC
STEP
MHz
kHz
t
VOLUME
a
SUR
ß
RELAY
DAILY 1 2 REC SLEEPDAILY 1 2 REC SLEEP
DOLBY NRDOLBY NR
PROGRAM
REPEAT1
SHUFFLE
TUNED
MONO
STEREO
SYNC
STEP
MHz
kHz
REC
t
VOLUME
a
DBFB
SUR
Note
The previous explanation shows you how to set the
time while the power is off. To change the time
while the power is on, do the following:
1 Press CLOCK/TIMER SET.
2 Turn the jog dial to select the SET CLOCK.
3 Press ENTER/NEXT.
4 Perform steps 2 through 5 above.
CD

3,52,41
(Power)

11
ß
RELAY
DAILY 1 2 REC SLEEPDAILY 1 2 REC SLEEP
DOLBY NRDOLBY NR
PROGRAM
REPEAT1
SHUFFLE
SALL DISC1
TUNED
MONO
STEREO
SYNC
STEP
MHz
kHz
REC
t
VOLUME
1
DBFB
SUR
You can preset up to 40 stations, 20 for FM, 10
for MW and 10 for SW. For South American,
Australian and Thai models, you can preset
up to 30 stations, 20 for FM and 10 for AM.
1Press TUNER BAND repeatedly
until the band you want appears in
the display.
Every time you press this button, the
band changes as follows:
FM nMW nSW
CD

321
45
ß
RELAY
DAILY 1 2 REC SLEEPDAILY 1 2 REC SLEEP
DOLBY NR
PROGRAM
REPEAT1
SHUFFLE
SALL DISC1
TUNED
MONO
STEREO
SYNC
STEP
MHz
kHz
REC
t
VOLUME
1
SUR
Preset number
(Power)
Step 4: Presetting
radio stations 3Press TUNING MEMORY.
A preset number appears in the display.
4Turn the jog dial to select the preset
number you want.
5Press ENTER/NEXT.
The station is stored.
6Repeat steps 1 to 5 to store other
stations.
To tune in a station with a weak
signal
Press – or + repeatedly to tune in the station
manually.
To change the preset number
Start over from step 1.
To change the AM tuning interval
(Except for the Middle Eastern model)
The AM tuning interval is factory-preset to 9 kHz
(10 kHz in some areas). To change the AM tuning
interval, tune in any AM station first, then turn off
the power. While holding down the ENTER/NEXT
button, turn the power back on. When you change
the interval, AM preset stations will be erased. To
reset the interval, repeat the same procedure.
Tip
The preset stations are retained for a day even if you
unplug the power cord or if a power failure occurs.
2Press and hold – or + until the
frequency indication starts to
change, then release.
Scanning stops when the system tunes in
a station. “TUNED” and “STEREO” (for
a stereo program) appear.
n

12
Connecting an MD deck for analog
recording
Make sure to match the color of the plugs and
the connectors. To listen to the sound of the
connected MD deck, press FUNCTION
repeatedly until “MD” appears.
To the audio output
of the MD deck To the audio input
of the MD deck
Connecting a super woofer
speaker
You can connect an optional super woofer
speaker.
Connecting a VCR
Make sure to match the color of the plugs and
the connectors. To listen to the sound of the
connected VCR, press FUNCTION repeatedly
until “VIDEO 1” appears.
To super woofer
To the audio output of the VCR
Connecting optional
AV components
To enhance your system, you can connect
optional components. Refer to the
instructions of each component.
Connecting audio
components
Select one of the following two connections,
depending on the equipment to be connected
and method of connecting.
Connecting an MD deck for digital
recording
You can record from CD into the MD deck
digitally by connecting an optical cable.
To the DIGITAL IN jack of the MD deck
Tip
When you connect a Sony MD (, Pand pbuttons
on this unit’s remote to perform play, pause and
stop operations.
Note
If you cannot select “MD” even when you have
pressed FUNCTION, press (power) while
pressing FUNCTION when the power is turned off.
“VIDEO 1” will be switched to “MD”. To return to
“VIDEO 1” do the same procedure.

13
Connecting outdoor
antennas
Connect the outdoor antenna to improve the
reception.
FM antenna
Connect the optional FM outdoor antenna.
You can also use the TV antenna instead.
AM antenna
Connect a 6- to 15- meter (20- to 50- feet)
insulated wire to the AM antenna terminal.
Leave the supplied AM loop antenna
connected.
Important
If you connect an outdoor antenna, ground
from yterminal with the screw clamp. To
prevent a gas explosion, do not connect the
ground wire to a gas pipe.
Connecting a video game
player
You can enjoy video games with audio
emphasis by connecting a video game player.
To listen to and watch a video game, press
FUNCTION repeatedly until “VIDEO 2”
appears.
Press OPEN/CLOSE or place your hand to
the sliding sensor to slide the panel. Connect
a video game player as shown below:
To the audio/video output of a
video game player
To the video input of a TV
Note
The sliding panel does not close when the AV
INPUT jacks are connected.
EQ
OPEN/CLOSE
FM 75Ω
AM
y
Insulated wire (not supplied)
75-ohm coaxial cable
(not supplied)
Ground wire (not supplied)
Screw clamp
Ground wire
(not supplied)
Screw clamp
FM 75Ω
AM
y

14
Basic Operations
Disc tray number
1Press OPEN/CLOSE 6and place
up to two CDs on the disc tray.
If a disc is not placed properly it will not
be recognized.
To insert a third disc, press DISC SKIP/
EX-CHANGE to rotate the disc tray.
2Press one of the DISC 1~3 buttons.
The disc tray closes and play starts.
If you press ·P (or CD (on the
remote), play starts from the CD loaded
on the tray whose button is lit green.
Playing time
With the label
side up. When
you play a CD
single, place it
on the inner
circle of the
tray.
ß
RELAY
DAILY 1 2 REC SLEEPDAILY 1 2 REC SLEEP
PROGRAM
SHUFFLE
S
TUNED
MONO
STEREO
SYNC
STEP
MHz
kHz
REC
t
VOLUME
DOLBY NR
ALL DISC1
DBFB
SUR
1
Track number
Playing a CD
— Normal play
You can play up to three CDs in a row.
CD

DISC SKIP/
EX-CHANGE
PLAY
MODE VOLUME
VOLUME +/–
4
$
4
$
)0P
P
+=p
p
·
·ª
·
·
ª
21
(Power)

Basic Operations
15
The CD SYNCHRO button lets you record
from a CD to a tape easily. You can use TYPE
I (normal) or TYPE II (CrO2) tapes. The
recording level is adjusted automatically.
1Press §and insert a blank tape into
deck B.
DOLBY NR
DISC SKIP/
EX-CHANGE
2
354 1
To Do this
Stop play Press p(pon the remote).
Pause Press ·P (Pon the remote).
Press again to resume play.
Select a track During play or pause, turn the
jog dial clockwise (to go
forward) or counterclockwise
(to go back) and release it
when you reach the desired
track. Or press +(to go
forward) or =(to go back)
on the remote.
Find a point in Press and hold down )or
a track 0(or )/0 on the
remote) during play and
release it at the desired point.
Select a CD Press a DISC 1~3 button or
in stop mode DISC SKIP/EX-CHANGE (or
D. SKIP on the remote).
Play only the Press PLAY MODE
CD you have repeatedly until “1 DISC”
selected appears.
Play all CDs Press PLAY MODE repeatedly
until “ALL DISCS” appears.
Remove the CD Press OPEN/CLOSE 6.
Exchange other Press DISC SKIP/
CDs while EX-CHANGE.
playing
Adjust the Turn VOLUME (or press
volume VOLUME +/– (MHC-WX7AV)
or VOL +/– (MHC-WX5) on
the remote).
Tips
• Pressing ·P when the power is off
automatically turns the power on and starts CD
playback if there is a CD in the tray (One Touch
Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing
·P or the DISC 1~3 buttons (Automatic Source
Selection).
• If there is no CD in the player, “CD NO DISC”
appears in the display.
• When a disc tray is selected or the CD placed on
that tray is playing, the DISC 1~3 button for the
respective tray lights green.
continued
Recording a CD
— CD Synchro Recording
With the side
you want to
record facing
forward

16
2Press OPEN/CLOSE 6and place a
CD.
Then press again to close the disc tray.
If the indicator for the tray you want to
record is not lit green, press DISC SKIP/
EX-CHANGE repeatedly so that it lights
green.
3Press CD SYNCHRO.
Deck B stands by for recording and the
CD player stands by for playback. ·
(for front side) lights up.
4Press DIRECTION MODE
repeatedly to select Ato record on
one side. Select ß(or RELAY) to
record on both sides.
5Press PPAUSE on deck B.
Recording starts.
To stop recording
Press πon deck B or pon the CD player.
Tips
• If you want to record from the reverse side, press
ªso that ª(for reverse side) lights up.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that “DOLBY NR” appears after pressing CD
SYNCHRO.
Notes
• You cannot listen to other sources while recording.
• Dolby NR and DIRECTION MODE (ßor
RELAY) is off when the mains AC power supply
is switched off.
Recording a CD (continued)
With the label
side up. When
you play a CD
single, place it
on the inner
circle of the
tray.
Listening to the radio
–– Preset Tuning
Preset radio stations in the tuner’s memory
first (see “Step 4: Presetting radio stations”).
CD

STEREO/
MONO
3
VOLUME
4
$
4
$
)0P
P
+=p
p
·
·ª
·
·
ª
VOLUME +/–
TUNER/BAND
21
(Power)

Basic Operations
17
n
1Press TUNER BAND repeatedly
until the band you want appears in
the display.
Every time you press the button, the
band changes as follows:
FM nMW nSW
2Turn the jog dial (or press =or
+on the remote) to tune in the
desired preset station.
To Do this
Turn off the radio Press (power).
Adjust the volume Turn VOLUME (or press
VOLUME +/– (MHC-
WX7AV) or VOL +/–
(MHC-WX5) on the
remote).
Turn counter-
clockwise
(or press =
on the remote)
for lower preset
numbers.
Turn clockwise
(or press +
on the remote)
for higher
preset numbers.
ß
RELAY
DAILY 1 2 REC SLEEPDAILY 1 2 REC SLEEP
DOLBY NRDOLBY NR
PROGRAM
REPEAT1
SHUFFLE
ALL DISCS1
TUNED
MONO
STEREO
SYNC
STEP
MHz
kHz
REC
t
VOLUME
SUR
1
Preset number Frequency
To listen to non-preset radio
stations
Use manual or automatic tuning. For manual
tuning, press – or + repeatedly. For automatic
tuning, press and hold – or +.
Tips
• Pressing TUNER BAND when the power is off
automatically turns the power on and tunes to the
last received station (One Touch Play).
• You can switch from another source to the radio
just by pressing TUNER BAND (Automatic Source
Selection).
• When an FM program is noisy, press STEREO/
MONO so that “MONO” appears in the display.
There will be no stereo effect, but the reception
will improve. Press the button again to restore the
stereo effect.
• To improve broadcast reception, reorient the
supplied antennas.

18
CD

1
2
DOLBY NR
3
45
6
3Press §and insert a blank tape into
deck B.
4Press rREC.
Deck B stands by for recording.
5Press DIRECTION MODE
repeatedly to select Ato record on
one side. Select ß(or RELAY) to
record on both sides.
6Press PPAUSE on deck B.
Recording starts.
To stop recording
Press πon deck B.
Tips
• If you want to record from the reverse side, press
ªso that ª(for reverse side) lights up.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• To record non-preset stations, use – and + to tune
in the desired station manually.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that “DOLBY NR ON” appears after pressing r
REC.
• If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
Note
Dolby NR and DIRECTION MODE (ßor RELAY)
is off when the mains AC power supply is switched
off.
With the side
you want to
record facing
forward
Recording from the
radio
You can record the radio program on a tape
by calling up a preset station. You can use
TYPE I (normal) or TYPE II (CrO2) tapes. The
recording level is automatically adjusted.
Frequency
1Press TUNER BAND to select the
band you want.
2Turn the jog dial to tune in a preset
station.
Turn clockwise
for higher
preset numbers.
Turn counter-
clockwise for
lower preset
numbers.
Preset number
ß
RELAY
DAILY 1 2 REC SLEEPDAILY 1 2 REC SLEEP
DOLBY NRDOLBY NR
PROGRAM
REPEAT1
SHUFFLE
ALL DISCS1
TUNED
MONO
STEREO
SYNC
STEP
MHz
kHz
REC
t
VOLUME
SUR
1
(Power)

Basic Operations
19
Playing a tape
DECK A (
DECK B (
VOLUME +/–
4
$
4
$
)0P
P
+=p
p
·
·ª
·
·
ª
DECK B 9(
DECK A 9(
You can use any type of tape, TYPE I
(normal), TYPE II (CrO2) or TYPE IV (metal) ,
since the deck automatically detects the tape
type. You can also use the jog dial’s AMS*
functions to quickly search for songs you
want to hear. To select either deck A or B,
press DECK A 9(or DECK B 9(
( MHC-WX7AV ) or DECK A (or DECK B
(( MHC-WX5 ) on the remote.
continued
1Press §and insert a recorded tape
in deck A or B.
2Press DIRECTION MODE
repeatedly to select Ato play one
side. Select ß** to play both sides.
To play both decks in succession, select
RELAY (relay play).***
3Press ·.
Press ªto play the reverse side. The
tape starts playing.
** The deck stops automatically after
repeating the sequence five times.
*** Relay play always follows the following
sequence:
Deck A (front side), Deck A (reverse side),
Deck B (front side), Deck B (reverse side).
With the side
you want to
play facing
forward
DOLBY NR
PPAUSE
3
3
112
CD
VOLUME0/)
(Power)

20
Searching for the beginning of a
track (AMS*)
During playback, turn the jog dial the same
direction as the 9or (indicator to go
forward. Turn the opposite direction to go
back. (Or press =or +on the remote.)
The search direction, + (forward) or – (back),
and number of songs being skipped (1~9)
appear in the display.
Example: searching forward 2 songs
* AMS (Automatic Music Sensor)
Notes
• The AMS function may not operate correctly
under the following circumstances:
– When the unrecorded space between songs is
less than 4 seconds long.
– If completely different information is recorded
on the left and right channels.
– When there are continuous sections of
extremely low level or low frequency sound
(like those of a baritone sax).
– When the unit is placed near a television. (In
this case, we recommend moving the unit
farther away from the television or turning off
the television.)
• Dolby NR and DIRECTION MODE (ßor
RELAY) is off when the mains AC power supply
is switched off.
To Do this
Stop play Press π(or pon the
remote).
Pause (Deck B only) Press PPAUSE. Press
again to resume play.
Fast-forward Press )while playing
the front side or 0while
playing the reverse side.
Rewind Press 0while playing
the front side or )while
playing the reverse side.
Remove the cassette Press §.
Adjust the volume Turn VOLUME (or press
VOLUME +/– (MHC-
WX7AV) or VOL +/–
(MHC-WX5) on the
remote).
Playing a tape (continued)
Tips
• Pressing ·or ªwhen the power is off
automatically turns the power on and starts tape
playback if there is a tape in the deck (One Touch
Play).
• You can switch from another source to the tape
deck just by pressing ·or ª(Automatic Source
Selection).
• If the tape you want to play is recorded with
DOLBY NR, you can reduce the noise by pressing
the DOLBY NR so that “DOLBY NR ON” appears.
• When dubbing tapes originally recorded with
Dolby NR B, the dubbed tape is automatically
played with Dolby NR B.
ß
RELAY
DAILY 1 2 REC SLEEPDAILY 1 2 REC SLEEP
DOLBY NRDOLBY NR
PROGRAM
REPEAT1
SHUFFLE
ALL DISCS1
TUNED
MONO
STEREO
SYNC
STEP
MHz
kHz
REC
t
VOLUME
SUR