Sound Devices MixPre-3M User manual

MixPre-3M
Multitrack Recorder | USB Audio Interface
User Guide

Sound Devices, LLC
E7556 Road 23 and 33
Reedsburg, Wisconsin 53959 USA
Direct: [phone]
Toll Free: [phone]
Fax: [phone]
www.sounddevices.com
[email protected]
Legal Notices
Product specications and features are subject to
change without prior notication.
Copyright © 2018 Sound Devices, LLC.
All rights reserved.
This product is subject to the terms and conditions of
a end-user license agreement provided in this guide,
and may be used in accordance with the license
agreement.
This document is protected under copyright law. An
authorized licensee of this product may reproduce
this publication for the licensee’s own personal use.
This document may not be reproduced or distrib-
uted, in whole or in part, for commercial purposes,
such as selling copies or providing educational ser-
vices or support.
This document is supplied as a technical guide. Spe-
cial care has been taken in preparing the information
for publication; however, since product specications
are subject to change, this document might contain
omissions and technical or typographical inaccura-
cies. Sound Devices, LLC does not accept responsi-
bility for any losses due to the use of this guide.
Trademarks
The “wave” logo is a registered trademark and
Kashmir is a trademark of Sound Devices, LLC. iPad,
iPhone, Mac and OS X are trademarks of Apple Inc.,
registered in the U.S. and other countries. Windows
is a registered trademark of Microsoft Corporation in
the U.S. and other countries. Bluetooth Smart is a
registered trademark of Bluetooth SIG, Inc. ASIO is
a registered trademark of Steinberg Media Technolo-
gies. All other trademarks herein are the property of
their respective owners.
WEEE Statement
If you wish to discard a Sound Devices
product in Europe, contact Sound Devices
(Germany) for further information.
Revision History
This table provides the revision history for this guide.
Date Firm-
ware
Version
Description
2-A June 2018 2.21 Initial release
2-B July 2018 2.21 Added Output Muting
3-A Dec 2018 3.00 Revised Remote
Control chapter w/
info on Wingman for
Music projects. Also
added new chapter
for USB Controllers.
This document is distributed by Sound Devices, LLC
in online electronic (PDF) format only. E-published
in the USA.
MixPre-3M User Guide • Sept 2018

3
Rev#
Table of Contents
Quick Start
Multitrack Recording Step-by-Step ........5
Intro
Powering
Flexible Powering Options .............11
Panels
Front Panel .......................13
Left Side Panel .....................13
Right Side Panel ....................14
Back Panel ........................14
Screens & Navigation
Home Screen ......................15
Main Menu Screen ..................17
Music Control Menu .................18
Input Channels
Accessing Channel Screen Settings ......19
Track Names .....................20
Setting Input Source ...............20
Enabling Monitoring ................21
Setting the Gain ..................21
Using Solo/Mute ..................21
Arming a Track ...................22
Understanding Pan ................22
Using Reverb ....................22
Rendering a Vocal Air Effect ..........23
Setting the Low Cut Filter ............23
Toggling Phase Inversion ............24
Stereo Track Linking .................24
Conguring Aux In Mode ..............24
Track Bank Selector .................25
Outputs
Adjusting Output Level ...............27
Output Muting ....................27
Headphone Output and Presets .........28
Metering
LEDs and Metering ..................29
Channel Knob Ring LEDs ............29
Channel Screen Meter ..............29
Meter View ......................30
Projects
Creating Projects ...................32
Import Recording ...................32
Opening Projects ...................33
Trashing Projects ...................33
Project History .....................34
Project Folder Structure ..............34
Sharing Projects ....................35

User Guide
4
Recording and Playback
Formatting SD Cards ................36
Transport Controls ..................37
Record Arming ...................37
Working with Cue Points ..............38
Moving Cue Points .................40
Previewing Cue Point Positions ........41
Clearing & Deleting Cue Points ........41
Locating to Cue Marks ..............41
Punching In/Out ....................41
Bouncing ........................42
Metronome .......................44
Record Settings ....................45
USB
USB Audio Interface .................46
Low-latency Monitoring ...............47
USB File Transfer ...................47
USB Keyboard .....................48
USB Keyboard Shortcuts ............48
User Presets and System Settings
Saving and Recalling Presets ...........49 System Settings ....................50
Remote Control
Wingman Application ................51
Connecting to a MixPre Recorder ......53
Music Projects via Wingman ..........54
Third-Party USB Controllers
Connecting the MixPre to a Controller .....56
Map User-Denable Buttons to Shortcuts . .57
Controller Interfaces .................57
Akai MidiMix Interface ..............58
Korg NanoKontrol 2 Interface .........59
Korg NanoKontrol Studio Interface .....61
Novation LaunchControl XL Interface ....62
Specications
Audio Inputs ......................65
Audio Outputs .....................66
Recorder .........................66
USB ............................66
Touch Screen ......................66
Remote Control ....................67
Power ...........................67
Environmental .....................67
Dimensions and Weight ..............67
Software License
FCC & ISED Compliance Statements

5
Rev#
Quick Start
Multitrack Recording Step-by-Step
This Quick Start chapter is meant as a “step-by-step, how-to” reference for set-
ting up the recorder and making music with the MixPre-3M right out of the box.
For more information on features and steps mentioned in this procedure, refer
to later chapters in this User Guide.
To begin multitrack recording:
1. Connect power.
XProvide at least one power source, either batteries (via included sled) or
via USB-C.
LIf using battery power, be sure to insert your Class 10 SD card into the SD slot
before attaching the sled to rear panel.
2. Power up the MixPre.
XSlide the power switch (left side panel) to On. The MixPre will boot and
light up.
3. Connect an audio source.
XConnect an audio source, either a microphone, line or instrument
line-level signal to one of the input jacks on the side panels.
4. Connect headphones.
XConnect your preferred headphones to the headphone jack on the right
side panel.
5. Format Media — The MixPre supports SD, SDHC,or SDXC, but the card
must be formatted by the MixPre prior to recording.
(A) Tap . The Main menu appears with multiple pages of settings.
(B) Tap (the Dots icon) to “page” through the sub-menu.
LThe number of dots indicate the number of pages; the solid dot shows what page
is displayed.

User Guide
6
(C) Tap SD Card > Edit > Format.
(D) Tap OK to conrm formatting of the card.
⚠Warning - all data on the SD card will be erased!
(E) Tap to return to the Home screen.
6. Create a project.
(A) Tap .
(B) Tap Project > New.
(C) Tap Name to customize the name of the new project.
LIf no custom name is provided, the MixPre creates new projects with unique
names, such as Song 1, Song 2, etc. by default.
(D) Tap Sample Rate to select from available rates.
(E) Tap Create.
7. Congure an input.
(A) Press the Channel knob associated with the track onto which you want
to record. For example, press knob 1 to record on track 1.
The Channel screen appears.
(B) Tap Input and use the HP encoder to select a source for the track. Op-
tions include: Mic, Line, Aux In, and USB In.
(C) Select Phantom if your microphone, DI or other device requires +48v
phantom power to operate.
(D) Tap Back to return to Channel screen.
(E) Tap Arm to arm the track for recording. The circle on the button appears

7
Rev#
red when track is armed.
(F) To hear the input as you adjust gain, rst turn the Channel knob until
fader setting is 0dB. Then, tap Gain (on Channel screen) and turn the
HP encoder to adjust input sensitivity for the source.
If possible, adjust with signal coming in at the intended level and ob-
serve the LED ring around the Channel knob. Aim for the LED ring to
remain green for the majority of the time. If unsure where to start, set
the gain to 35dB for mic sources, 10dB for line sources, and make ad-
justments as needed.
LThe Gain adjustment will time out after ve seconds.
(G) Tap the Dots icon to access “page” 2 of settings, such as Pan, Reverb,
Air, etc. Set any/all of them as desired.
(H) Enable Linking if your source is a stereo instrument such as a keyboard,
drum machine, or computer output.
(I) Tap to return to the Home screen.
8. Set up metronome.
(A) Tap .
(B) Page through submenu and tap Metronome. You will hear a preview of
the metronome in headphones while in this sub-menu.
(C) Make adjustments to the volume and to t your intended time signature
and tempo.
(D) Tap Count-in to select how many measures the metronome will count at
the beginning before recording begins.
(E) On page 2 of the Metronome sub-menu, tap On During... to determine
when you’ll hear the metronome. Options include: Count-in, Record, or
Play.
(F) Tap . The metronome preview will stop.
(G) Tap to access the Music Control menu. Then tap to activate the
metronome. The Metronome icon will illuminate orange when active.
LThe metronome will only start when the MixPre enters record and/or play accord-
ing to the On During... settings previously congured.
9. From the Home screen, ensure the track number you intend to record is
red, indicating it is armed and ready to record. You should also see input
levels on the meter view.
10. Push REC button to record and play music!
11. Press Stop button to stop recording. Press it again (twice) to return to the
beginning of the recording.
12. Push Play button to playback the recording. During playback, you can

User Guide
8
change the track Level, Reverb, Air, Pan, Solo, and Mute settings.
LYou can only use Air on one track at a time.
13. (Optional) Should you want to scrap the recording and try again, tap
and then tap History. Using the HP encoder, rotate to highlight and select
Restart Song.
14. To lay another track over the just-recorded track, congure an input and
proceed from there. See step 7. Congure an input..
15. After laying down all of your tracks, play your song and adjust track mix
levels, pans, reverb, air, etc.
16. When you have a mix that you like, you can easily share your le by using
the Render feature.
(A) Tap and then tap Render.
(B) Select the format you want to use to render (export) the le. Options
include: Wav stereo, AAC stereo, or Wav All Isos.
This will perform a real-time render of your project. Feel free to dynami-
cally adjust mix levels, pans, reverbs etc during the render process.
17. Most importantly, have fun creating music! No saving of the project need
be done, since the MixPre automatically takes care of that for you.

9
Rev#
Intro
Hi and a big thanks for buying the MixPre-3M! At Sound Devices, we are pas-
sionate about great sounding audio. We’ve unleashed our design and engineer-
ing team, many of whom are musicians, and asked them to create a ground-
breaking device that sets new standards for what’s possible from a super
compact and affordable, multitrack audio recorder.
From the ground up, we’ve designed the MixPre-3M to be a versatile tool for
musicians and singer/songwriters who want to record sound with unrivalled
quality. Whether you are gigging, multitracking a new song or capturing a live
performance, the MixPre-3M is your best friend on stage, in the studio, and out
on the road.
We’ve harnessed our storied heritage in portable recording to create an incred-
ible piece of kit! We think that you’ll nd the unique mix of functionality, per-
formance, size, ease-of-use, design and build quality to be an invaluable part of
your life and creative passion for many years to come.
The MixPre has been meticulously engineered to offer extreme exibility and
sound quality, operating in a variety of fundamental ways:
• 12-channel multitrack recorder/mixer, up to 96kHz/24-bit
• 3 simultaneous inputs including 3 ultra low noise mic preampliers
• 5-in, 2-out USB computer audio interface
The MixPre-3M includes many indispensable features for musicians including:
• Track Laying
• Overdubbing
• Punch In/Out
• Q-Points
• Track Bouncing
• Reverb and Vocal Air Effects
• Metronome
• Export
The MixPre-3M works in a similar fashion to a DAW such as Protools, Logic,
Cubase, Reaper etc, however, with its dedicated hardware it allows musicians to
focus on their art rather than getting bogged down in all the technical stuff that
a typical computer-based system brings. Musicians and songwriters now have
an easy to use, portable tool for creating high quality, multi-layered songs any-
where and anytime that inspiration grabs them.
The MixPre-3M lets you record up to three tracks at once from either the three
XLR inputs, Aux in connectors, or USB inputs. The built-in metronome helps you
to keep your performance in time, while the reverb and vocal air effects add
character to your recording and can aid in inspiring a great performance. The
vocal air effect is an easily dialled-in combination of EQ and compression that
results in an airy sheen and intimacy to vocals, popular today with singer/song-

User Guide
10
writers.
Of course, the possible uses for the MixPre-3M are virtually unlimited, but a few
common ones are:
• Creating a multi-layered song using the track laying and overdubbing fea-
tures
• Mixing and recording small ensemble live performance
• Playback of multichannel backing tracks
• Recording live events, concerts, jam sessions, and so forth.
• Premium-quality 5x2 USB audio interface for any DAW application
The MixPre-3M’s versatility is augmented by the various powering options.
Whether you want to power the MixPre-3M from a USB connection, AA batter-
ies, L-mount batteries, or optional AC wall plug adapter, it’s ready, willing and
able to go anywhere, anytime—always handling your audio needs with grace.
We sincerely hope that you enjoy working with the MixPre-3M as much as we’ve
enjoyed creating it! Please drop us an email at [email protected]
and share your experiences as we’d love to see how the MixPre-3M is furthering
your passion.

11
Rev#
Powering
Flexible Powering Options
In designing the MixPre-3M, we felt that it was important for it to be able to
operate in a wide array of applications and environments. To support that goal,
power can be supplied from several possible sources:
• Four AA NiMH rechargeable or Lithium primary batteries installed in the
provided 4-AA battery sled, called MX-4AA (included).
• Eight AA NiMH rechargeable or Lithium primary batteries installed in the
optional 8-AA battery sled, called MX-8AA.
• One or two Sony-type L-mount batteries installed in the optional L-mount
battery sled accessory, called MX-LMount.
• USB-C to USB-C cable connected to a USB-C host computer or AC wall
adapter.
• USB-A to USB-C cable connected to a USB-A host computer or AC wall
adapter.
• Dual USB-A to USB-C cable connected to a USB-A host computer.Use this
cable option if your computer is unable to provide adequate power for the
MixPre with only one USB-A port.
• MX-PSU AC wall adapter (included) to USB-C power supply.
LBatteries not included.
The power switch is located in the upper right corner of the left side panel.
Power Switch

User Guide
12
To ensure Battery Status indicator displays accurate levels/status:
1. Tap .
2. Page through submenu and tap Power.
3. Select the type of batteries being used in the sled. Options include: NiMH,
Alkaline, L-Mount

13
Rev#
Panels
Front Panel
Power light, Star button for shortcuts, Channel knobs, Channel knob ring LEDs,
backlit Transport buttons, and touch screen
Recorder Transport Controls
Channel Knobs
Channel Knob Ring LEDs
Power Light
LCD
The Channel knobs on the front panel have two purposes:
• Rotate to adjust the level of the selected track in the LR mix.
• Press to access the selected track’s Channel screen.
Left Side Panel
USB connections, XLR inputs 1-2, 2-channel 3.5 mm output, and power switch
Power Switch
USB-A Port
XLR Inputs 3.5 mm Stereo Output
USB-C Port

User Guide
14
Right Side Panel
3.5mm headphone output, 3.5mm Aux/Mic input, XLR input 3, headphone en-
coder
HP Encoder
XLR Input
3.5 mm Headphone Output 3.5 mm Aux/Mic Input
Back Panel
Battery mounts, SD memory card slot, Allen wrench (for ¼-inch-20-thread cap-
tive screw), and anti-rotational pin
SD Memory Card Slot
Battery Mounts
Allen wrench & anti-rotational pin

15
Rev#
Screens & Navigation
The MixPre-3M has a sunlight-viewable, high-resolution, touch-screen-based
user interface. The touch screen interface displays the Home screen, Main Menu
screen, Channel screens and various other views.
For information on Channel screens, see Accessing Channel Screen Settings in
the Input Channels chapter.
There are several tap zones on the touch screen allowing you to easily interact
with the MixPre. As you become familiar with the user interface, changing set-
tings for inputs, outputs, recording and metering will become fast and intuitive.
Home Screen
The Home screen view is the default view that appears on the touch screen
when the device is powered up. The Home screen looks like this:
Status Bar
Q Icon & Cue NumberMusic Icon
Time Counter
Punch IndicatorRemaining Time
SD Card Icon
Track Bank Selector
Meter View
Limiter Indicator
Track Labels
L/R Mix Meters
Power Status Icon
Menu Icon
Metronome

User Guide
16
You will nd on the Home screen numerous items, such as:
Name IcoN DescrIptIoN
Music Notes icon Access the Music Control menu by touching this region of
the Home screen.
Current name Displays name of current Music project.
Time counter Indicates the current song position in hh:mm:ss:tenths.
All songs start at 00:00:00:0. Access the Music Control
menu by touching this region of the Home screen.
Q icon Indicates current cue number: 01, 02, etc. A cue point
stores a song position so that you can easily locate to
that point—ideal for quickly jumping to the start of a
verse, chorus, or bridge.
When stopped, tap the Q icon to open the Cue Points
menu, which provides access to the Cue List and other
options.
While recording or during playback, tap the Q icon to
create a cue mark at the current location in the song.
Cue marks may be set as Play In, Record In, Record Out,
or Stop cue points via the Cue Points menu.
For more information, see Working with Cue Points.
Power Status Icons
(Green USB)
USB power source is ideal.
(Orange USB)
USB power source low. Brightness dimmed, USB-A port
disabled, 48v phantom on 2 channels only.
(Green Battery)
Healthy battery. Plan to change batteries when green
level drops to about ¼ full.
(Flashing Red
Battery)
Battery power is critically low. Change batteries.
Menu icon Provides access to Menu screen.
Meter View Displays the metering for the 12 tracks and stereo mix,
LR. White-outlined boxes surround meters to indicate
which tracks are being controlled by the Channel knobs.
Tap the L (left) horizontal meter to open Record sub-
menu and quickly adjust L&R Gain.
Switch track banks by touching different groups of me-
ters. See Track Bank Selector for more information.
Status bar Cycle status information by touching:
• Song status: current bar position as well as Punch
and Metronome indicators,rendering status, and
remaining time: In idle or record, the remaining time
eld displays remaining time on the SD card. In play,
the eld displays remaining time to the end of the
song.
• Date & Time

17
Rev#
Main Menu Screen
The Menu screen is where most of the features and functions are selected and
set up.
To enter the Menu screen:
XTap on the Home screen.
There are three Menu pages. These pages are indicated by the Dots icon
. Tapping it will toggle between the three Menu pages.
The Menu has its own submenus, which may be displayed by tapping them.
page submeNu DescrIptIoN
1 Presets Lets you save and load user presets to and from SD card and inter-
nal memory. Also allows resetting all settings to factory default.
1Project Lets you create new projects, open or trash existing projects.
1Inputs Provides settings for the 3.5 mm Aux/Mic input.
1 Outputs Provides routing and gain settings for the stereo output, as well as
ability to mute the stereo output.
2Reverb Provides access to Reverb settings.
2Metronome Provides access to Metronome settings.
2 Record Provides access to L&R Gain and AAC export quality.
2SD Card Displays SD card and allows for format and empty trash card func-
tions.
3System Provides settings for le transfers, setting and sending a tone sig-
nal, limiters, Date/Time settings, adjusting LCD/LED brightness,
updating rmware, and viewing version and regulatory information.
3 Power Select the type of batteries (Alkaline, NiMH, L-Mount) being used to
ensure that the Power Status icon on the Home screen accurately
displays remaining battery level or power status.
To return to the main Menu from a submenu at any time:
XTap .
To return directly to the Home screen from the main Menu:
XTap .

User Guide
18
Music Control Menu
The Music Control Menu provides fast access to the the Q-List, the Solo/Mute
screen, metronome on/off, project render, and access to project history.
For more information, see Working with Cue Points, Using Solo/Mute, Metro-
nome, Project History and Sharing Projects.
To access the Music Control menu:
XTap in the top left corner of the Home screen.

19
Rev#
Input Channels
An input channel is the path an audio source travels before it can be mixed and
recorded along with other channels. In the MixPre-3M, think of an input channel
as the same as a ‘track’ in a DAW. An input channel can be fed by any of the
XLR mic/line sources, a 3.5mm Aux line/mic source (with or without plug-in-
power), or from USB channels 1-4 from a computer.
You can also select the MixPre-3M’s mixer outputs, or a metronome click. With
its overdub capability, the MixPre-3M allows recording of up to 12 tracks, a
maximum of 3 at a time.
An input channel’s settings are adjusted in its Channel screen.
Accessing Channel Screen Settings
To access the Channel screen:
XPush in a Channel knob.
Each Channel screen provides two pages of settings—indicated by Dots icon. Tap
the Dots icon to switch pages.
settINgs For more INFormatIoN
Solo & Mute Using Solo/Mute
Arm Arming a Track
Input Setting Input Source
Monitor Enabling Monitoring
Gain Setting the Gain
Pan Understanding Pan
Reverb & (Vocal) Air Using Reverb & Rendering a Vocal Air Effect
Low Cut Setting the Low Cut Filter
Phase Toggling Phase Inversion
Linking Stereo Track Linking
Since the MixPre-3M has more tracks (up to twelve) than its three physical
Channel knobs, settings for tracks 4 and higher are accessed using the Track
Bank selector. For more information, see Track Bank Selector.

User Guide
20
Track Names
You can edit a song’s individual track names from its associated Channel screen.
For example, changing the default names Track 1 to Drums, Track 2 to Key-
board, Track 3 to Lead Vocals, etc.:
To edit Track 1’s name:
1. Press Channel 1 knob.
2. Tap top left corner of the Channel screen.
3. Enter a new name for Track 1 and tap OK.
The edited name will appear at the top of the track’s Channel screen and
will also be embedded in the metadata of rendered ISO (isolated) les when
using Render > Wav All Isos. See Sharing Projects for more information.
Setting Input Source
Input, on the Channel screen, lets you select the input source for a track.
Any input can be routed to any channel. This reduces the need to rearrange
instruments plugged into inputs when you want to record that input to a differ-
ent track. You can also select the MixPre-3M’s mixer outputs (see Bouncing), a
metronome click (see Metronome) or turn on Phantom power.
To route inputs:
1. Enter the Channel screen, tap Input. The Routing screen appears, as shown
in the following examples.
2. Select an input for the track. A track can only have one live input source.
3. Select Phantom if you want to turn on Phantom power for a Mic source.
Phantom toggles 48V Phantom on and off. Turn Phantom on if a condenser
microphone is being used.
LNotice in the previous screenshots how Phantom is only an option when a Mic
source is selected.
4. Select Click as an input for your track if you want to record the metronome
click into your song. This is useful should you want to later import the song
into a DAW to develop the song further. The recorded metronome will allow