Sound Sation WF-U1300 User manual

Please read this manual carefully and proper take care of this manual.
USER MANUAL
WF-U1300
True Diversity
WIRELESS MICROPHONE
SYSTEMS
Leggete questo manuale e conservatelo per future consultazioni!
MANUALE utente

Dear customer,
First of all thanks far purchasing a SOUNDSATION® product. Our mission is to satisfy
all possible needs of musical instrument, professional audio and lighting users offering
a wide range of products using the latest technologies.
We hope you will be satised with this item and, if you want to collaborate, we are look-
ing for a feedback from you about the operation of the product and possible improve-
ments to introduce in the next future. Go to our website www.soundsationmusic.com
and send an e-mail with your opinion, this will help us to build instruments ever closer
to customer’s real requirements.
One last thing: read this manual before using the instrument, an incorrect operation
can cause damages to you and to the unit. Take care!
The SOUNDSATION Team
Gentile Cliente,
Grazie per aver scelto un prodotto SOUNDSATION®. La nostra missione è quella di
offrire ai nostri utenti una vasta gamma di strumenti musicali ed apparecchiature audio
e lighting con tecnologie di ultima generazione.
Speriamo di aver soddisfatto le vostre aspettative e, se voleste collaborare, saremmo
lieti di ricevere un vostro feedback sulla qualità del prodotto al ne di migliorare costan-
temente la nostra produzione. Visitate il nostro sito www.soundsationmusic.com ed
inviateci una mail con la vostra opinione, questo ci aiuterà a sviluppare nuovi prodotti
quanto più vicini alle vostre esigenze.
Un’ultima cosa, leggete il presente manuale al ne di evitare danni alla persona ed al
prodotto, derivanti da un utilizzo non corretto.
Il Team SOUNDSATION

1. TABLE OF CONTENTS
1. UNPACKING ............................................................................................................6
1.1. WF-U1300H ..........................................................................................................................6
1.2. WF-U1300P...........................................................................................................................6
2. ACCESSORIES........................................................................................................6
3. OVERVIEW...............................................................................................................6
3.1. WF-U1300H ..........................................................................................................................7
3.2. WF-U1300P...........................................................................................................................7
4. MAIN FEATURES.....................................................................................................7
5. RECEIVER CONTROL AND FUNCTIONS ..............................................................8
5.1. Receiver Display ...................................................................................................................9
6. RECEIVER INSTALLATION...................................................................................10
7. SYSTEM SETUP ....................................................................................................10
7.1. Channel Setup Mode...........................................................................................................10
7.2. Auto Search Mode...............................................................................................................11
7.3. ACT Function ......................................................................................................................11
7.4. Transmission Power Setting................................................................................................12
8. HAND-HELD MICROPHONE.................................................................................13
8.1. Hand-held Microphone Using Technique ............................................................................14
9. POCKET TRANSMITTER AND HEADSET ...........................................................15
10. AUDIO CONNECTIONS.........................................................................................16
11. WF-RACK KIT1 AND KIT2 ....................................................................................17
11.1. WF-RACK KIT1...................................................................................................................17
11.2. WF-RACK KIT1 Assembling................................................................................................18
11.3. WF-RACK KIT2...................................................................................................................18
11.4. WF-RACK KIT2 Assembling................................................................................................19
12. SPECIFICATIONS ..................................................................................................20
13. FREQUENCY TABLE.............................................................................................21
14. WARRANTY AND SERVICE..................................................................................23
15. WARNING ..............................................................................................................23
16. DECLARATION OF CONFORMITY.......................................................................46
3
ENGLISH

IMPORTANT SAFETY SYMBOLS
The symbol is used to indicate that some hazardous live terminals
are involved within this apparatus, even under the normal operating
conditions, which may be sufcient to constitute the risk of electric
shock or death.
The symbol is used in the service documentation to indicate that spe-
cic component shall be replaced only by the component specied in
that documentation for safety reasons.
Protective grounding terminal
Alternating current/voltage
Hazardous live terminal
Denotes the apparatus is turned on
Denotes the apparatus is turned off
WARNING: Describes precautions that should be observed to prevent the danger
of injury or death to the operator.
CAUTION: Describes precautions that should be observed to prevent danger of
the apparatus.
TAKING CARE OF YOUR PRODUCT
fRead these instructions
fKeep these instructions
fHeed all warning
fFollow all instructions
Water / Moisture
The apparatus should be protected from moisture and rain and can not be used near
water; for example near a bathtub, a kitchen sink, a swimming pool, etc.
Heat
The apparatus should be located away from heat sources such as radiators, stoves or
other appliances that produce heat.
4
ENGLISH
WF-U1300 User manual

Ventilation
Do not block areas of ventilation opening. Failure to do could result in re. Always
install according to the manufacturer’s instructions.
Object and Liquid Entry
Objects do not fall into and liquids are not spilled into the inside of the apparatus for
safety.
Power Cord and Plug
Protect the power cord from being walked on or pinched particularly at plugs, conve-
nience receptacles, and the point where they exit from the apparatus. Do not defeat the
safety purpose of the polarized or grounding-type plug. A polarized plug has two poles;
a grounding-type plug has two poles and a third grounding terminal. The third prong
is provided for your safety. If the provided plug does not t into your outlet, refer to an
electrician for replacement.
Power Supply
In case of external power supply, the apparatus should be connected to the power sup-
ply only of the type as marked on the apparatus or described in the manual. Failure to
do could result in damage to the product and possibly the user. Unplug this apparatus
during lightning storms or when unused for long periods of time.
Fuse
To prevent the risk of re and damaging the unit, please use only of the recommended
fuse type as described in the manual. Before replacing the fuse, make sure the unit
turned off and disconnected from the AC outlet.
Electrical Connection
Improper electrical wiring may invalidate the product warranty.
Cleaning
Clean only with a dry cloth. Do not use any solvents such as benzol or alcohol.
Servicing
Do not implement any servicing other than those means described in the manual. Refer
all servicing to qualied service personnel only. Only use accessories/attachments or
parts recommended by the manufacturer.
Warning
Please remember the high sound pressure do not only temporarily damage your sense
of hearing, but can also cause permanent damage. Be careful to select a suitable
volume.
Interference from cell phone
Using a cell phone near the wireless system can induce noise. If this accours, move
the cell phone further away from the components of the wireless system.
5
ENGLISH
WF-U1300 User manual

2. UNPACKING
WF-U1300 system is composed by following parts:
2.1. WF-U1300H
f1x Receiver
f1x External Power Adapter
f1x Hand Transmitter
f2x 1.5V AA-Type Batteries
f2x Antennas
fThis User Manual
2.2. WF-U1300P
f1x Receiver
f1x External Power Adapter
f1x Pocket Transmitter
f1x Headset Microphone
f2x 1.5V AA-Type Batteries
f2x Antennas
fThis User Manual
ATTENTION: Packaging bag is not a toy! Keep out of reach of children!!!
Keep in a safe place the original packaging material for future use.
3. ACCESSORIES
SOUNDSATION can supply a wide range of quality accessories that you can use with
your WIREFREE Series wireless microphone system, like Cables, Mixers, Speakers,
Ampliers, Stands, etc.
All products in our catalogue has been long tested with this device so we recommend
to use Genuine SOUNDSATION Accessories and Spare Parts.
Ask your SOUNDSATION dealer for any accessories you could need to ensure best
performance of the product.
4. OVERVIEW
WF-U1300 is a UHF True Diversity professional wireless microphone with 300 chan-
nels and a simple and intuitive user interface. “True Diversity” means that the receiving
system is equipped with two antennas, two receive circuits and a device capable of
6
ENGLISH
WF-U1300 User manual

continuously choose the stronger and interference-free signal.
This system is built with leading technology that allows the integration of many of the
major functions - such as amplication section, digital signal processing, PLL (Phase-
Locked Loop) frequency synthesis, and more - into a single CHIP. This allows us to
offer highly professional performance yet cost-effective products.
The WF-U1300 is also equipped with the automatic frequency search system and IR
sync. system for channel synchronization between receiver and transmitter in a quick
way. Furthermore, the Digital Pilot Technology not only allows to monitor reception level
and battery charge, but even to operate with multiple systems without problems.
Finally, there are two optional kit for rack mounting of 1 or 2 receivers, respectively, on
1 or 2 standard 19” rack units. Ask your dealer or visit SOUNDSATION website www.
soundsationmusic.com for further details.
WF-U1300 systems are available in 2 congurations:
4.1. WF-U1300H
• 1x UHF True Diversity Receiver
• 1x Hand Transmitter with Professional Dynamic Cardioid Capsule
4.2.WF-U1300P
• 1x UHF True Diversity Receiver
• 1x Pocket Transmitter
• 1x Headset Microphone with Professional Dynamic Cardioid Capsule
5. MAIN FEATURES
fUHF True Diversity Technology to Avert Interferences
f300 Preset Frequencies and IR Matching System for Quick Setup
f823-832MHz UHF Band
fSimple and Outright User Interface with LCD display on Transmitter and Receiver
fDigital Pilot Technology to allow multi system Operation
fTransmitter AF-level and Battery-Low Monitoring directly on the Receiver
f80m Ideal Distance (without obstacles)
fProfessional Hand held Microphone with Dynamic Cardioid Capsule (WF-U1300H
model)
fBody pack with Connector Locking System (WF-U1300P model)
fProfessional and Lightweight Headset with High-Sensibility Dynamic Cardioid Cap-
sule (WF-U1300P model)
fRack-Mount Kit for 1 or 2 receiver units to 1x or 2x 19” rack unit (optional)
7
ENGLISH
WF-U1300 User manual

6. RECEIVER CONTROL AND FUNCTIONS
1. Power Switch: It switches on and off the receiver. Please notice that LOCK
function is active at power on. Hold SET button for a few seconds to unlock the
receiver and access to the parameters (refer to the section “8. SYSTEM SETUP”
at page 10 for details).
2. Set Button: It access to all editing functions, etc. (See section “8. SYSTEM SET-
UP” at page 10 for further details).
3. DOWN Button: During editing, it increases current parameter’s value.
4. UP Button: During editing, it decreases current parameter’s value.
5. LCD Display: It shows all functions and allows easy and intuitive programming of
all parameters.
6. ACT Window: It is the infrared sensor used to synchronize the operating channel
between receiver and transmitter.
7. Volume Knob: It increases or decreases the output level of BALANCED and MIX
outputs.
8. Antennas: They receive RF signals from the transmitter. It’s important to always
plug the two supplied antennas to their connectors on rear panel, taking care to
screw them all the way, and ensure maximum receiving capacity of the system.
8
ENGLISH
WF-U1300 User manual

9. Balance Output: It is the balanced XLR audio line output to connect to your mixer
or audio system. For more details about the internal wiring of balanced cables,
refer to paragraph “11. AUDIO CONNECTIONS” at page 16.
10. Mix Output: It is the unbalanced audio line output with ¼” Jack to use in case of
connection to mixers or audio equipment with unbalanced connections.
11. DC Input: Connect here the external power supply (17Vdc – 300mA min.)
6.1. Receiver Display
It indicates which of the two antennas is receiving the best signal.
Soundsation WF-U1300 operates with true diversity technology; this means that the
receiver has inside two independent receiving circuits, each with its own antenna.
Depending on the position of the transmitter, possible obstacles and its distance from
the receiver, the WF-U1300 chooses the best radio signal, always ensuring impeccable
sound quality.
This bar indicates radio signal level
This bar indicates audio signal level
It indicates current channel, there are 300 channels available.
It indicates the frequency currently used. There are 300 available
frequencies. Refer to “14. FREQUENCY TABLE” (page 21) for the
correspondence between frequencies and channels.
This icon shows the battery level of hand-held or pocket transmitter.
When ashes, this icon indicates that ACT function (IR channel synchro-
9
ENGLISH
WF-U1300 User manual

nization between receiver and transmitter) is active.
It indicates that all keys are locked, long press SET button to unlock.
These icons Indicate that the signal level from your hand-held or pocket
transmitter is, respectively, high (“HI” is on) or low (“LO” is on).
7. RECEIVER INSTALLATION
fInstall the two antennas and place them perpendicularly.
fConnect the supplied power adapter to the DC power supply socket (11).
fConnect the balanced audio output (9) or the unbalanced (10) to your mixer or
sound system, using the appropriate cables (see section “11. AUDIO CONNEC-
TIONS” at page 16 for further details).
fTurn on the receiver by pressing the POWER button (1); the LCD (5) will light up
showing the current settings of the system.
8. SYSTEM SETUP
Please notice that when you switch the receiver on LOCK function is active. Hold for a
few seconds SET button to unlock and have access to all parameters. LOCK icon will
turn off.
NOTE: In addition to the active LOCK function, at power on the receiver is
even muted ( icon ashes in the display) until you turn on the transmit-
ter and align it on the same receiver’s channel.
8.1. Channel Setup Mode
After unlocking the receiver, the LOCK icon will turn off and the CHANN icon ashes,
indicating that you can choose one of the 300 available channels.
fPress the UP or DOWN buttons to increase or decrease the channel number and its
associated frequency.
fOnce you have located an interference-free channel, press and hold for about 2
seconds the SET key to switch to the ACT mode and transmit the channel to the
transmitter.
10
ENGLISH
WF-U1300 User manual

NOTE: If during channel selection you do not press any button for about 10
seconds, the system automatically returns to the LOCK mode. It is therefore
necessary to unlock the receiver again to re-access channel setup mode.
8.2. Auto Search Mode
SOUNDSATION WF-U1300 is equipped with a useful auto scan function of the fre-
quencies. This allows you to always choose those channels with less problems and
make setting operations extremely quick.
fTo automatically perform a frequency scan, unlock - if not already done - the receiver
by holding for a few seconds SET button (LOCK icon disappears).
fThen briey press SET button again to enter auto search mode. The display shows
the following screen:
fPress the UP or DOWN buttons to search for free frequencies.
Channel number will increase (if you press UP) or decrease (if you press DOWN)
until the rst free frequency is reached. Auto Research icon ashes.
fOnce the frequency is reached, press SET button to move to next step and send
channel information via IR (ACT function, see next section).
NOTE: If you do not press any buttons for about 10 seconds, the automatic
search icon goes off and the system returns to channel setting mode. If,
after the receiver is back to channel setting mode (CHANN icon is ashing)
you do not press any button for other 10 seconds, the system automatically
returns to LOCK mode.
8.3.ACT Function
The WF-U1300 comes with an infrared transmission system between receiver and
transmitter that easily sends all settings to your hand-held or pocket transmitter. To
activate the ACT function:
fTurn on the receiver and hold for a few seconds SET key to unlock it. LOCK icon
will turn off.
fPress UP or DOWN to manually increase or decrease channel number or press
SET again to enter the Auto Search Mode (in the latter case, press UP or DOWN to
search for the rst free frequency).
fPress and hold for about 2 seconds SET key again to enter ACT mode and transmit
11
ENGLISH
WF-U1300 User manual

all channel information to the transmitter. ACT icon will ash for about 10 seconds.
fBring the hand-held or pocket transmitter as close as possible to the receiver’s IR
sensor (refer to paragraphs “9. HAND-HELD MICROPHONE” at page 13 and “10.
POCKET TRANSMITTER AND HEADSET” at page 15 for details) located on the
right side of the display.
fOnce the transmitter is “hooked”, ACT icon stops blinking; MUTE icon turns off,
BATT. and POW HI icons light up, indicating that the system is now working properly.
fThe display on the transmitter shows the same channel set on the receiver and the
HI icon indicates a good radio signal.
fAfter about 10 seconds, the system automatically returns to LOCK mode. At this
point the system is fully set and ready to operate.
8.4.Transmission Power Setting
fWhen POW icon ashes on receiver’s display (usually followed by LO), press UP
or DOWN buttons to adjust transmission power: “HI” stands for good power; “LO”
12
ENGLISH
WF-U1300 User manual

stands for low power.
NOTE: Turn down the transmit power of a wireless system may seem a
contradiction. Normally radio interference cause audio noises because of
poor power, but this is not always true. In fact, sometimes a transmitter too
close to the receiver can create problems. In these cases, it may be better to
reduce transmission power in order to cancel these problems.
9. HAND-HELD MICROPHONE
WF-U1300H system features a hand-held transmitter with professional dynamic cardi-
oid capsule.
1. Grille: It protects the microphone capsule. Never remove it to prevent damage to
the internal parts of the microphone.
2. LCD Display: This back-lit display shows all important information related to set-
tings, as well as the battery charge level.
NOTE: After about 5 seconds the back-light is lowered, reducing battery
consumption. The lighting returns to increase each time you press Power
button.
3. ACT Window: During ACT mode, bring this part of the transmitter close to the
receiver’s IR sensor to complete the operation.
4. Power button: Press and hold this button for about 2 seconds to turn on or off the
microphone.
5. Battery Slot: Insert two 1.5V AA-Type batteries, paying attention to correct polarity
(indicated on bottom of this battery compartment).
6. Battery Slot Cover: Remove this cover to access the battery-compartment and
13
ENGLISH
WF-U1300 User manual

insert or replace the batteries.
9.1. Hand-held Microphone Using Technique
fDon’t hold the microphone grill.
fAvoid holding the microphone on antenna position.
fDon’t hold two microphones together
ATTENTION: Operating distance between microphone grill and mouth must
be less than 15cm
fAvoid direct the microphone toward a speaker to avoid Larsen effect, which could
damage your audio system.
14
ENGLISH
WF-U1300 User manual

10. POCKET TRANSMITTER AND HEADSET
1. Microphone: WF-U1300P system features a headset microphone with professional
cardioid dynamic capsule.
2. Microphone Input: Plug here the headset audio connector. Please notice that this
connector is equipped with security threads, to prevent it from coming off during
use.
3. Volume: Adjust the audio input level of the transmitter. Use this knob to adapt
microphone signal level in order to prevent distorted sound.
4. POWER Button: This selector has 3 positions. When it’s all to the OFF position,
the microphone is turned off; when it is in the central position, the microphone is
active but the audio is disabled; nally, when it’s all to ON position, the microphone
is working and the audio is active.
NOTE: Standby central position allows the unit to transmit without audio.
This option is important to prevent interference in the receiver due to the
absence of a radio transmitting signal. It is, therefore, suggested to ALWAYS
use this standby position when you temporarily don’t sing or play but the
wireless microphone is connected to an audio system (e.g. during a pause
in a show). You can move the switch to OFF position (all down) only when
you are sure that the sound system volume is low.
5. Power LED: It lights up when the transmitter is on.
6. Antenna: It transmits the radio signal. Be careful not to bend or break this terminal.
15
ENGLISH
WF-U1300 User manual

7. LCD Display: The back-lit display shows all important information relating to set-
tings, as well as battery charge level.
NOTE: After about 5 seconds the back-light is lowered, reducing battery
consumption. The lighting returns to increase each time you press the Pow-
er button.
8. ACT Window: During ACT mode, bring this part of the transmitter close to the
receiver’s IR sensor to complete the operation.
9. Battery Slot: Insert two 1.5V AA-Type batteries, paying attention to correct polarity
(indicated on bottom of this battery compartment).
10. Battery Slot Cover: Open this cover to access to insert or replace the batteries.
Following the instructions for their replacement:
fApply a slight pressure at the top of the door (10) and pull down.
fInsert or replace the batteries in the compartment, observing the +/- polarity marked
on the bottom.
fClose the cover to prevent batteries to be lost during use.
11. AUDIO CONNECTIONS
You need XLR balanced cables for connections to your audio equipment. See the
pictures below that show the internal wiring of these cables. Be sure to use only high
quality cables (visit our website www.soundsationmusic.com for further details).
Balanced use of XLR connectors
1= Ground/Shield
2= Hot (+)
3= Cold (-)
INPUT OUTPUT
In case of unbalanced use Pins 1 and 3 will be jumped
Balanced use of 1/4” jack TRS connector
Strain relief
clamp
Sleeve
Tip
Sleeve
Ground shield
Ring Ring
Cold (- Ve)
Tip
Hot (+ Ve)
You can, of course, connect even unbalanced equipment to balanced outputs. Use ei-
16
ENGLISH
WF-U1300 User manual

ther mono and stereo jack, making sure ring and collar are connected together (or pins
1 & 3 in the case of XLR connectors).
Unbalanced use of 1/4” jack TS connector
Strain relief
clamp
Sleeve
Tip
Sleeve
Ground shield
Tip
Signal
12. WF-RACK KIT1 AND KIT2
WF-U24 series receiver units can be mounted in 19” standard rack units using optional
kits (contact your dealer or go to www.soundsationmusic.com for more details) to adapt
the receiver to any 19” rack. 2 different kits are available:
fWF-RACK KIT1: To set one SOUNDSATION WIREFREE series receiver in one 19”
rack unit.
fWF-RACK KIT2: To set two SOUNDSATION WIREFREE series receivers in two
19” rack units.
12.1. WF-RACK KIT1
The kit includes:
A. 2x ¼ rack unit adapter
B. 2x Extension cables for Antenna
17
ENGLISH
WF-U1300 User manual

C. 4x Screws to fasten the receiver to the two rack adapters
NOTE: The kit doesn’t include screws to fasten the whole block (receiver
and adapters) to the 19” rack chassis.
12.2. WF-RACK KIT1 Assembling
1
2
4
3
5
1. Remove the two plastic parts on each of the two sides of the receiver.
2. Place the A adapter so that the two lateral holes match those on the receiver side.
3. Fasten the adapter using two screws as shown in the following picture.
4. Repeat steps 1 to 3 of this section on the other side of the receiver.
5. Unscrew the two rear antennas and insert extension cables supplied with the kit.
Then attach the other end to the panel in order to place the antennas outside the
rack. The same operation must be performed for both antennas.
12.3. WF-RACK KIT2
The kit includes:
A
B C D
A. 1x 19” rack panel
18
ENGLISH
WF-U1300 User manual

B. 2x Lateral brackets
C. 4x Receiver’s coupling brackets
D. 4x Extension cables for Antenna
E. 12x Screws to fasten the two receiver each other and then to the rack adapters
NOTE: The kit doesn’t include screws to fasten the whole block (receiver
and adapters) to the 19” rack chassis.
12.4. WF-RACK KIT2 Assembling
1. Remove the 4 plastic parts on two sides of the receivers.
2. Place the two receivers so that the holes on the upper and lower part coincide as
shown in previous picture and attach one coupling bracket on the top and one on
the bottom of the receivers using the supplied screws.
3. Place the lateral brackets respectively on the left and right side of the two connect-
ed receivers using the supplied screws.
4. Unscrew the four antennas and insert extension cables supplied with the kit. Then
attach the other end to the rack panel as shown in the picture.
1
3
3
4
2
19
ENGLISH
WF-U1300 User manual

13.SPECIFICATIONS
SYSTEM
Carrier Frequency: UHF823-832MHz
Frequency Stabilization: < ±30ppm
Dynamic Range: >90dB
Total Harmonic Distortion: <0.5%
Frequency Response: 40Hz-15KHz ±3dB
Audio Output Level: Balanced 400mV; Unbalanced 400mV
Packing Dimensions (WxHxD): 435 x 104 x 321 mm
Packing Gross Weight: 2.5 kg
RECEIVER
Power Supply: DC 17V / 300mA
Consume Power: 5W
Signal/Noise Ratio: >90dB
Receiving Sensitivity: 5dBuV
De-Emphasis: 75uS
Dimensions (WxHxD): 210 x 43 x 187 mm (antennas not incl.)
Antenna: 255 mm (not bent)
Net Weight: 0.53 kg
HAND-HELD AND POCKET TRANSMITTER
Transmitter Power: 10mW(Max)
Modulation Type: FM
Max Deviation: ±25KHz
Spurious Emission: >40dB
Battery Voltage: 3V (2x1.5V AA Battery)
Continuous Using: 5 hours
Hand-held Mic. Dimensions (W/DxH): Ø35 (min) - Ø53 (max) x 260 mm
Hand-held Mic. Net Weight: 0.335 kg (batteries included)
Pocket Transmitter Dimensions (WxHxD): 62 x 103 x 30 mm
Antenna (W/DxH): Ø3 x 9 mm
Pocket Transmitter Net Weight: 0.132 kg (batteries included)
20
ENGLISH
WF-U1300 User manual