Soundcore Life Q30 User manual

Soundcore Life Q30
USER MANUAL

01 EN
Charging
• Fully dry off the USB port before charging.
• Use a certied USB-C charging cable and charger to prevent any damage.
• Do not power on your headphones while charging.
R L
Flashing red once every 60 seconds Low battery
Steady red Being charged
Light off Fully charged
Powering On/Off
Press and hold the power button for 3 seconds to power on/off.
ON
OFF
3s
RL

EN 02
Bluetooth Pairing
1. When powered off, press and hold the power button for 5 seconds until the LED
ashes blue to enter the Bluetooth pairing mode.
2. Select “Soundcore Life Q30” on your device’s Bluetooth list to connect.
5s
2s
1
L
L
R
R
Life Q30
Flashing blue Bluetooth pairing
Steady blue (for 2 seconds) Bluetooth connected
Pairing with another device
When successfully connected with the rst device, press twice the power button to
pair up with another device.

03 EN
x2
L
L
Life Q30
R
R
• Your Soundcore headphones can only play music on one mobile device at a
time. To play from another connected device, pause the device that's currently
active rst.
• Each time you power on your Soundcore headphones, it will automatically
connect to your last successfully connected device if available within the
Bluetooth range.
Button Controls
Play/Pause Press
Next track Press and hold for 1 second
Previous track Press and hold for 1 second
Volume up/down Press

EN 04
Answer/End a call
Press
Put the current call on hold and answer a new
incoming call
Reject a call
Press and hold for 1 second
Switch between held call and active call
Activate Siri or other voice assistant software Press and hold for 1 second
NFC Mode
Near Field Communication (NFC) is a technology that enables short-range wireless
communication between various NFC compatible devices, such as mobile phones
and IC tags. If your Bluetooth device supports NFC, you can connect it with your
headphones easily.
1. Ensure to power on the headphones by pressing the power button for 3 seconds.
2. Enable the NFC feature on your Bluetooth device (iOS devices excluded).
3. Tap the right panel of your headphones with the back of your Bluetooth device.
R
L
NFC

05 EN
Noise Cancellation Mode
To reduce ambient noise, turn on the active noise cancellation mode by pressing the
NC button. Press the NC button again to turn off.
NC ON
x1
RL
Transparency Mode
To stay aware of your surroundings by allowing ambient sounds in, touch the right
panel for 1 second to activate the transparency mode.
R
L
1s
AUX Mode
Play audio on an external device by plugging in a 3.5mm AUX cable.

EN 06
3.5mm
R L
• Plugging in an audio cable will automatically switch to AUX mode, and
Bluetooth mode and ANC will turn off.
Soundcore App
Download the Soundcore app to enhance your experience.
EQ settings: There are more than 20 EQ settings you can choose from in the app to
optimize your experience while enjoying different music genres.
Noise cancellation: Choose an active noise cancellation mode to reduce ambient
noise according to your surroundings.
• Transport: Targets low-end frequencies like engine and road noise for peaceful
journeys and commutes.
• Outdoor: Reduces ambient sounds in cities for less distractions.
• Indoor: Reduces voices and mid-frequency noise from coffee shops and other inside
spaces.
Transparency: Stay aware of your surroundings by allowing ambient sounds in.
White noise soundscape: Tailor your own white noise soundscape when you need to
rest.
Firmware update: You will be informed once the new version of rmware is detected
when you connect the headphones with the app.
Soundcore
Apple and the Apple logo are trademarks
of Apple Inc.
Google Play and the Google Play logo are
trademarks of Google Inc.

07 EN
Reset
You might need to reset your headphones if you experience any connectivity
problems or function issues.
Press and hold the power button and volume up button simultaneously for 5
seconds until the LED indicator ashes blue and red alternately twice.
5s
x2
RL
Specifications
Specications are subject to change without notice.
Input 5 V 0.65 A
Charging time 2 hours
Playtime (with ANC mode turned on) 40 hours
Playtime (with ANC mode turned off) 60 hours
Driver size 40 mm × 2
Frequency response 20 Hz-20 kHz (Bluetooth)
16 Hz-40 kHz (AUX)
Impedance 16 Ω
Bluetooth version V5.0
Bluetooth range 15 m / 49.5 ft