Soundcore Flare Mini 3 User manual

soundcore
soundcore
HQ% @fl gfljl
Soundcore Mini 3
USER MANUAL

At a Glance
soundcore
Power LED
Power button
Volume down button
Multi-function button
Volume up button
Bluetooth/PartyCast button
Bluetooth/PartyCast LED
Microphone
USB-C charging port
Charging
e Use the provided USB-C cable to prevent any damage.
e Fully charge this speaker before the first use to prolong the lifespan of the
built-in battery.
e Disconnect this speaker from the charger when fully charged. Do not charge
for extended periods.
01 EN

-e- Flashing red Low battery
) Steady red Being charged
@) Steady white Fully charged
Powering On/Off
To power on or off, press and hold the power button for 2 seconds.
® soundcore
MS on ‘
ON/OFF
O
OFF *
e This speaker will power off automatically 30 minutes after no audio input or
button inactivity.
EN 02

Using your Soundcore Mini 3
Bluetooth Mode
With this speaker, you can enjoy music through your Bluetooth-enabled devices.
soundcore
PARING CONNECTED
Press Enter Bluetooth pairing mode
-+- Flashing blue Bluetooth pairing
[ ] Steady blue Bluetooth connected
e Dual Bluetooth Connection: This speaker can pair up to 2 mobile devices via
Bluetooth. To pair with another device, press the Bluetooth button to re-enter
Bluetooth pairing mode.
e This speaker can only play music on one mobile device at a time. To play from
another connected device, pause the currently active device first.
e Each time you power on your Soundcore speaker, it will automatically connect
to your last connected device if available within the Bluetooth range. If not,
press the Bluetooth button to enter Bluetooth pairing mode.
PartyCast Mode
You can wirelessly connect up to 100 identical Soundcore Mini 3 speakers together.
1. Connect one Soundcore Mini 3 speaker with your smartphne or tablet as the
primary speaker.
2. Press and hold the Bluetooth button on the primary speaker and all desired
speakers to enter pairing mode.
>>> When successfully connected, the Bluetooth LED on the primary speaker will
continue flashing white, while on the secondary speakers will turn white.
03 EN

Primary Speaker nfl
Primary Speaker
e 7@7 T
PARING CONNECTED
When PartyCast mode is successfully entered:
® Any secondary speaker can be switched to become the primary speaker by
pressing the Blutooth button twice and connecting to your smartphone. Any
primary speaker can be switched to become the secondary speaker by pressing
the Bluetooth button twice and searching for an available primary speaker.
e To exit the PartyCast mode, press and hold the Bluetooth button on any
speaker for 2 seconds.
Button Controls
-
d Press
-
d Press twice
d Press thrice
—/+ Press
Press
=
d Press
~
(o)
Play/Pause
Next track
Previous track
Adjust volume
Answer/End a call
Answer a second incoming call and
put the current call on hold
EN 04

d’ Press and hold for 2 seconds Reject an incoming call
Switch between a call on hold and an
d’ Press and hold for 2 seconds .
acitve call
Activate Siri or other voice assistant
d— Press and hold for 2 seconds
software
Soundcore App
Download the Soundcore App for enhanced product experience.
e Check product information
e Update firmware
® Indicate battery status
® Switch BassUp mode
e Remotely control the volume and play/pause
Soundcore
a
GETITON
#
Download
on
the
soundcore
Google
Play
‘
App
Store
Google Play and the Google Play logo are Apple and the Apple logo are trademarks
trademarks of Google Inc. of Apple Inc.
Specifications
=|Specifications are subject to change without notice
DC power input SV=1A
Battery capacity 1800 mAh/3.7V
Audio output power 6W
Charging time 2-3 hours
Playtime (varies by volume level and
. Up to 15 hours
music content)
Waterproof level IPX7
Bluetooth version 5.0
Bluetooth range 20 m /66 ft
05 EN