Soundigital POWER 35000.1D User manual

35000.1D

1 Amplificador 35000.1D POWER
1 Manual do Proprietário
1 Chave Allen 2,5mm
1 Chave Allen 4mm
1 Adesivo Promocional
1 35000.1D POWER Amplifier
1 Owner’s Manual
1 Allen Wrench 2.5mm
1 Allen Wrench 4mm
1 Promotional Sticker
CONTEÚDO DA EMBALAGEM //
PACKAGE CONTENTS

INSTALLATION
11
To know our complete line of amplifiers and accessories,
visit www.soundigitalusa.com .
Efficiency
The POWER Line uses Class D topology, together with
high thermal efficiency, which result in a very high
efficiency overall (>70%). You will have less battery
consumption, which means more power for a much longer
period.
Warning!
This “Warning” sign alerts the user of
important info. Not following this
instructions may cause injuries to the
user or damage to the equipment.
*TermLab is a trade mark by Harris, Wayne - Carson City-NV
ADDITIONAL INFORMATION
PACKAGE CONTENTS
1 35000.1D POWER Amplifier
1 Owner's Manual
1 Allen Wrench 2.5mm
1 Allen Wrench 4mm
1 Promotional Sticker
CONTACT CHANNEL
Customer Service
[phone]
[email protected]
Tech Support
[email protected]
Website
soundigitalusa.com
Social Media
facebook.com/soundigitalusa
Dear Customer,
Congratulations on acquiring your SounDigital!
You've just purchased a product of high quality and
technology. The SounDigital products are developed to
assure maximum efficiency and reliability to your sound
system.
State of Art
The POWER Line is the state of art in audio reproduction.
Deep bass, precise midranges and nice highs are
guaranteed by the high technology implemented in this
line.
Amazing Bass
The innovative Twin Source 2.0 system guarantees much
more stability in the audio reproduction, with the use of two
twin power supplies.
Live Show
With the NST (Noise Suppression Technology) system in
the RCA inputs, you will have a much cleaner sound,
totally noise free. We implement a new input topology, with
more efficient filters and isolators, that not only supress
any noise, but also guarantees a very clean signal.
Feel the Power
Real power is what you will find in the POWER Line.
Amplifiers that range from 400W RMS to 35000W RMS
make this line the most powerful in the world.
Thermal Efficiency
New aluminum heatsink with more mass and forced
venting systems makes the POWER Line even more
efficient and robust. You will have an efficient system with
low distortion for a much longer period.
Low EMI Interferance
We made the impossible, possible! Even our 35000.1D
Power has a very low EMI interferance. This means they
can be easily clamped in measuring tools such as
TermLab*.
IMPORTANT INFO
Read this manual and follow its instructions and information
carefully. It contains extremely important information to have
your amplifier working properly. If you feel the need to contact
our Tech Support, you can reach our technicians through the
e-mail [e-mail] .
We recommend the use of SounDigital original
accessories for a batter performance. The crossovers,
power supplies and voltmeters offered by SounDigital
follow the same quality standards as our amplifiers,
assuring an excelent quality and high power sound
system to our customers.

DESCRIPTION PANELS
12
35000.1D POWER
"Power On" LED indicator (Blue);
1
"CLIP" LED indicator (Yellow);
"Protection" LED indicator (Red);
Audio Input RCA connector;
Audio Output RCA connector;
Variable signal gain control;
2
3
4
5
6
Negative speaker connector (-);
Minimum speaker load allowed (impedance);
Positive speaker connector;
Negative power supply connector (GND);
Remote power supply connector;
Positive power supply connector (+12V).
7
8
9
10
11
12
POWER CLIP PROTECT
LEVEL
MIN MAX
1
℧
+
SPEAKER
-
min
INPUT
OUTPUT
2
3
10
11
12
REM REM
GND
GND
+12V
+12V +12V
+12V
GND
GND
19
7
8
5
6
4
10
11
12

INSTALLATION
13
*To achieve the capacity of protection needed, more than
one fuse/circuit breaker can be linked for the battery
connections to the amplifier and ground, use good quality
copper cables. CCA cables should not be used.
Use loudspeakers with power and impedance
compatible with the amplifier.
The 35000.1D Power should be connect to
+12VDC to +18VDC only during competition.
After judging or testing the fuses or circuit
breakers should be turned off.
Warning!
Installation Tips
The protection fuse or circuit breaker
must be installed at a max distance of 30
cm (1 foot) from the battery.
Warning!
Minimum capacity of the battery
Recommend capacity of the battery
Size of recommended cable 4 X 00 AWG/67mm²
2971Ah
3000Ah
Warning!
Unplug the negative (-) terminal of the
battery before proceding with any electrical
installation in the vehicle to avoid fire
starts, wounds or damage to the amplifier.
The ground cable should be the shortest possible and
should be connected to the chassis of the vehicle. The
surface should be sanded at the contact point to create
a clean, metal-to-metal connection between the
chassis and the termination of the ground wire;
Remove de paint between
the terminal and chassis
Keep the RCA cables together, but away from the
power or the audio output cables and away from
electric equipment such as electronic fuel injection
centrals, electric engines, etc;
You should never connect or disconnect
RCA cables with the amplifier on,
because it may damage the headunit or
the amplifier.
Warning!
For proper operation your amplifier needs the correct size
of cables and batteries.
Eletrical Dimensioning Safety Instructions
To prevent injuries to the user or damage to the
amplifier, read all the safety instructions written on this
manual;
If you're insecure about the installation of this
equipment, get in touch with our tech support or with a
professional specialized in car audio installation;
Before proceding with the installation of any electric
equipment on your vehicle, unplug the negative (-)
terminal of the battery to avoid fires, injuries or
damages;
Use your sound system safely. The continuous
exposure to sound pressures over 85dB may cause
irreversible hearing damage;
This equipment is for use in automotive DC voltage
batteries between 12.6 and 14.4 volts. Before
installing the equipment, check the voltage of the
batteries;
Do not install the amplifier in places exposed to water,
dirt or humidity;
Choose a ventilated place to install the amplifier and
avoid blocking the side ventilation windows;
Fix the amplifier in a steady and proper way. Avoid
fixing it in metallic parts of the vehicle, because it may
cause ground looping (noise);
Make sure the location chosen for the amplifier
installation does not affect the operation of the vehicle;
When passing cables through metallic walls, use
rubber O-rings to avoid cable cutting and short circuits. -
Make sure the place chosen for the installation of the
amplifier will not interfere with the proper working of the
vehicle;
This product may reach te mperatures over
60°C/140°F. Make sure it is cold before touching it;
Clean the amplifier periodically with a brush or dry cloth
to assure the thermal efficiency of the heatsink;
Be careful when making holes in the vehicle. Make
sure you're not making holes in the fuel tank, br ake e
lines or electrical cables of the vehicle;
Make sure the cables are properly fixed throughout the
ins allationt ;
Wear gloves, safety g s and all necessary PPE lasse
during the installation of SounDigital amplifiers.

INSTALLATION
14
Speaker Connection
It is important to observe the minimum working
impedance for the 35000.1D to work properly.
Never connect the speakers under the
nominal impedance of the amplifier.
Warning!
Loudspeakers an Voice Coils Connections
POWER CLIP PROTECT
LEVEL
MIN MAX
INPUT
OUTPUT
1
℧
min
+
SPEAKER
-
Double Voice coil subwoofers.
One subwoofer with coils wired in parallel
Multiple Batteries Connections
One subwoofer with coils wired in series.
2Ω + 2Ω
4Ω + 4Ω
Voice
Coils
Total
Impedance
1Ω
2Ω
POWER CLIP PROTECT
LEVEL
MIN MAX
INPUT
OUTPUT
1
℧
min
+
SPEAKER
-
POWER CLIP PROTECT
LEVEL
MIN MAX
INPUT
OUTPUT
1
℧
min
+
SPEAKER
-
2Ω + 2Ω
4Ω + 4Ω
4Ω
8Ω
Voice
Coils
Total
Impedance
Two subwoofers with coils wired in parallel:
4Ω + 4Ω
8Ω + 8Ω
Voice
Coil
Total
Impedance
1Ω
2Ω
POWER CLIP PROTECT
LEVEL
MIN MAX
INPUT
OUTPUT
1
℧
min
+
SPEAKER
-
It is recommended the use of copper busbars for the
connections of multiple batteries. The bars must have
equidistant holes for a balanced distribution of batteries
and amplifiers in order to avoid an unbalanced heating.

INSTALLATION
15
Two subwoofers with voice coils wired in parallel / series:
POWER CLIP PROTECT
LEVEL
MIN MAX
INPUT
OUTPUT
1
℧
min
+
SPEAKER
-
POWER CLIP PROTECT
LEVEL
MIN MAX
INPUT
OUTPUT
1
℧
min
+
SPEAKER
-
Example of connection using only one RCA cable.
Input Connection
POWER CLIP PROTECT
LEVEL
MIN MAX
INPUT
OUTPUT
1
℧
min
+
SPEAKER
-
POWER CLIP PROTECT
LEVEL
MIN MAX
INPUT
OUTPUT
1
℧
min
+
SPEAKER
-
Simplified power connections diagram.
Power Connections
It is recommended the use of cooper busbars for the
connections of multiple batteries. The bars must have
equidistant holes for a balanced distribution of batteries
and amplifiers in order to avoid an unbalanced heating.
POWER CLIP PROTECT
LEVEL
MIN MAX
INPUT
OUTPUT
1
℧
min
+
SPEAKER
-
Barramento +
Barramento -
Multiples Batteries Connections

INSTALLATION
16
The max. distance for the installation of
the fuse/circuit breaker is one foot away
from the battery.
Warning!
Remote Input Connection
Instalation Sequence
Before proceding with the installation, unplug the
negative from all of the batteries;
Affix the amplifier in such a way you have access to the
connectors;
Install the power cables on the vehicle in a proper way.
From the battery to the busbar, fuse holder or circuit
breaker. Chose the appropriate section for the cable
(see Table 1). Make all of the connections to the
busbars, fuse holders or circuit breakers, with no fuses
in the holder and with the circuit breakers in the "Off"
position;
Connect the power cables in to the amplifier, observing
the polarity. Connect all the positive cables from the
fuse holder or circuit breaker to the positive conector of
the amplifier and all the negative power cables from
the busbar or from the batteries, to the negative
connector of the amplifier;
Install the signal input cables in a proper way, distant
from the power cables;
Connect the RCA to the head unit and amplifiers;
POWER CLIP PROTECT
LEVEL
MIN MAX
1
℧
+
SPEAKER
-
min
INPUT
OUTPUT
Procedures for Setting the Gain
Check if gain is set to minimum. Turn on the head unit
and/or the remote switch to power on the amplifier. The
three LEDs will light up for approximately 1 second.
After that, only the power LED will remain on.
To set the gain of your amplifier properly, follow the
steps below;
Install the audio output cables with the appropriate
section (see table 2), distant from the power and audio
input cables;
Connect the audio output cables to the amplifiers and
the acoustic boxes, observing the positive (+) and
negative (-) polarities;
Install the remote cable with the power cables, using a
section of 1.5mm² or thicker;
Connect the remote cable to the two REM terminals on
the amplifier and to a 12V power supply activated by a
switch key or to the remote power output of the head
Before powering the system, verify all the connections
and make sure there are no mistakes or short-circuits
on the power and ground cables;
Reconnect the ground of the batteries;
Check if the remote key is in the "Off" position and if the
head unit is turned off, then place the fuses in the fuse
holders or switch the circuit breakers on;
Disconnect the output cables from the amplifier
outputs;
With the gain set to minimum, turn on the head unit and
the remote switch to power on the amplifier. Wait until
only the power LED is on;
Reproduce a 60Hz sine wave signal through the head
unit;
Set the volume of the head unit to about 70% of its
capacity.
REM REM
GND
GND
+12V
+12V +12V
+12V
GND
GND
1A Fuse
On/Off Switch
REM REM
GND
GND
+12V
+12V +12V
+12V
GND
GND
Remote Output
of Head Unit
1A Fuse
Connection through an On/Off Switch
Connection through the remote output of the head unit:

Turn up the gain clockwise slowly until the "CLIP" LED
starts blinking;
INSTALLATION
17
Declaration of Conformity
J. Anflor Eletrônicos - ME
Gravataí - RS
Brazil
D e c l a r e i n o w n r e s p o n s a b i l i t y t h a t t h e p r o d u c t s
d e s c r i b e d i n t h i s o w n e r ´ s m a n u a l a r e i n
c o m p l i a n c e w i t h t e c h n i c a l s t a n d a r d s :
- EN 60065:2002+A1:2002+A11:2008+A2:2010+A12:2010
- IEC 60065:2014-06
Juliano Anflor
J. Anflor Eletrônicos
Brazil
POWER CLIP PROTECT
LEVEL
MIN MAX
1
℧
+
SPEAKER
-
min
INPUT
OUTPUT
Interrupted audio and red LED blinking: It indicates an
electronic failure on the PCB. Talk to our tech support
and look for the nearest tech assistance to solve the
problem.
Return the gain to the limit where the "CLIP" LED
stops blinking and remains off.
SounDigital amplifiers are microcontrolled. You can
check the diagnostic of the monitoring of the electronic
functions through the LED panel Installed on the side
of the amplifier;
Protection and Monitoring Systems
Blue LED on with the audio playing normally: It
indicates the amplifier is working properly;
The audio is interrupted, blue and red LEDs start
blinking: It indicates the input tension is over 20 volts;
The audio is interrupted, blue LED start blinking: It
indicates the input tension is under 9 volts;
The audio is interrupted and the yellow LED starts
blinking: It indicates a short circuit or low output
impedance;
Yellow LED blinking on the rhythm of the music: It
indicates distorted signal on the output. Lower the gain
or the volume of the head unit;
The audio is interrupted and the red LED is constantly
on: It indicates the amplifier has reached over
80°C/176°F and gone into thermal protection.
Suspend the audio reproduction from the head unit
and keep the amplifier on until the red LED goes off;

TECHNICAL SPECS
18
Section
REF. AWG mm²
16.8
13.3
8.3
5.2
2.0
Table 2 - Power Conductors
Cable lenght (ft)
Power in Watts RMS
F F F F F F F
F F F F F F F
F F F F F F
0~3.28 3.2~6.3 6.5~9.8 9.8~13.1 13.1~16.4 16.4~19.6 19.6~22.9
Table 1 - Power Conductors
A
B
C
D
E
F
G
00
1/0
2
3
4
5
6
67.4
53.5
33.6
26.6
21.2
16.8
13.3
mm²mm²
*All cables shall be doubled with the aid of an adapter or busbar.
Section
40.000W
35.000W
30.000W
25.000W
20.000W
15.000W
12.000W
8.000W
6.500W
5.000W
4.000W
3.000W
2.500W
2.000W
1.600W
1.200W
0~3.28
Cable lenght (ft)
A
A
B
B
B
B
B
B
C
C
C
D
D
E
F
G
A
A
A
B
B
B
B
B
B
B
C
C
D
E
F
G
2 x A* 2 x A*
2 x A*
4 x A*
4 x A*
2 x A*
4 x A*
4 x A*
4 x A*
4 x A*
2 x A*
2 x A*
2 x A*
6 x A*
6 x A*
4 x A*
4 x A*
4 x A*
4 x A*
2 x A*
2 x A*
2 x A*
A
A
A
B
B
B
B
B
B
B
C
C
E
E
F
A
A
A
A
A
B
B
B
B
C
C
D
E
F
A
A
A
A
A
B
B
B
C
C
D
E
E
A
A
B
B
C
C
D
D
E
A
B
B
C
C
D
E
Power in Watts RMS
3.2~6.3 6.5~9.8 9.8~13.1 13.1~16.4 16.4~19.6 19.6~22.9

TECHNICAL SPECS 35000.1D
19
Impedance
Power @ 14.4V
35000.1D POWER
2Ω
19250W
1Ω
35000W
4Ω
10587W
THD x Input Amplitude
-5.0
-3.0
-1.0
1.0
3.0
5.0
50.0m 230.0m 410.0m 590.0m 770.0m 950.0m
X: 90mV/div
Y: 1%/div
THD+N Ratio vs Amplitude
40.0
33.0
26.0
19.0
12.0
44.0 83.0 122.0 161.0 200.0
5.0 5.0
X: 19.5 HZ/div
Y: 3,5dB/div
Vac vs Frequency
Frequency Response < 200Hz
Power x Input Amplitude
39.75k
31.09k
22.43k
13.77k
5.11k
3.55k
50.0m 230.0m 410.0m 590.0m 770.0m 950.0m
X: 90mV/div
Y: 4.3kW/div
VAC vs Amplitude
Frequency Response 5Hz to 20kHz
35.0
28.2
21.4
14.6
7.8
1.0
5.0 4.004k 8.003k 12.0k12.0k 16.0k 20.0k
X: 2.0kHz/div
Y: 3.4dB/div
VAC vsFrequency
RMS Power - CTA 2006 @ 40Hz
Graphics
SNR (LPF 15kHz / Nominal Power)
THD + N (Nominal Impedance / 100Hz / LPF 15kHz / 10% of Nominal Power)
Frequency Response (+/-3dB)
Damping Factor (Nominal Impedance @100Hz)
Audio Specs
Total Efficiency (Source+Output) 81.8%
Operating Voltage
9VDC ~ 18VDC
0.3%
20Hz ~ 18kHz
>100
75dB
Power Supply
Current Draw (Max) 2971A
Input Sensitivity
0.5V ~ 8V
Input Signal and Filters
Dimensions
E
A
B
C
D
28.6lbs (13kg)
A
B
C
D
E
858.7mm
819.1mm
224.7mm
189.7mm
68.1mm

LIMITED WARRANTY
SounDigital warrants the original purchaser that this product shall be free of defects in materials an workmanship for a
period of twelve (12) months from the original date of purchase. Some countries have extended warranty in case the
product is installed by an authorized dealer. This warranty is not transferable and applies only to the original customer from
an authorized SounDigital dealer.
Warranty is void when:
ŸDefect or problem caused by misuse of the product;
ŸIncorrect installation or non-conformity with the Manual;
ŸMaintenance made by unauthorized personnel;
ŸAlteration or removal of the seal/serial number;
ŸExposure to adverse conditions (weather, humidity, etc);
ŸDamage caused by fall, impact or natural depreciation, caused by transport and/or handling, risks, or smashings;
ŸProducts was purchased more than 12 months ago.
Warranty covers:
Ÿ Component or material with manufacturing defects;
Ÿ Workmanship/service needed to repair the equipment;
Ÿ If you need service on your SounDigital amplifier, send it (freight-prepaid) to SounDigital's Amplifier Repair Center
through an authorized SounDigital dealer (must be accompanied by proof of purchase);
Ÿ Any extra information you can get by contacting us at the e-mail address: [email protected];
Ÿ In case of manufacturing defect or bad quality of raw material, the max compensation will be the replacement of the
product, not allowing any kind of compensation payment;
Ÿ New modifications/iterations on a product don't obligate the manufacturer to modify products formerly produced.
20