Speakman EYESAVER SEF-1800-FP User manual

SPEAKMAN®
PO Box 191 Wilmington, DE 19899 Phone: [phone] Fax: [phone]
Visit us on the web at www.speakmancompany.com
9/07 rev.2
92-2451
Page 1 of 4
SPEAKMAN SAFETY PRODUCTS
Additional Installation Instructions for
SEF-1800-FP EYESAVER®FAUCET
DESCRIPTION
The SEF-1800-FP Eyesaver®faucet combines a gooseneck faucet with an independently operated
eyewash. The faucet can be operated by either the Speakman Ceramic Perfect®Valve Bodies or the wall
mounted foot pedal valve. The eyewash offers twin aerated sprays and flip top dust covers. See page 4
for available foot pedal options.
Notes: All dimensions are in
inches (millimeters)
unless otherwise
specified and are
subject to change.

SPEAKMAN®
PO Box 191 Wilmington, DE 19899 Phone: [phone] Fax: [phone]
Visit us on the web at www.speakmancompany.com
9/07 rev.2
92-2451
Page 2 of 4
ADDITIONAL PACKING LIST for FOOT PEDAL OIPTION
Item Description Qty.
1 3/8” Compression Hose, 6” lg 1
2 3/8” Compression Tee 1
3 3/8” Compression Hose, 20” lg. 1
4 3/8” TO ½” Adapter 1
5 Separate Stops (part of Item 10) 2
6 ½” Pipe nipples 2
7 ½” Tees 2
8 ½” Unions (part of Item 10) 2
9 ½” Pipe (part of Item 10) 2
10 S-3219-USS, Foot Pedal Valve 1

SPEAKMAN®
PO Box 191 Wilmington, DE 19899 Phone: [phone] Fax: [phone]
Visit us on the web at www.speakmancompany.com
9/07 rev.2
92-2451
Page 3 of 4
INSTALLATION
Step 1: These instructions provide additional information for adding the necessary connections for a
foot pedal option. Follow the instructions for installing the SEF-1800 before following these
instructions for adding the foot pedal option.
a. Verify water supply is off before any work is
begun.
b. Mount the foot pedal valve using the
Installation instructions provided for the wall
mounted foot pedal valve, S-3219.
Step 2: Hose Connections-
a. Unscrew the hose connecting the center
gooseneck faucet to the cold valve body.
b. Connect this hose to the side of the tee with
the ‘H’ on it.
c. Attach the 6” hose provided from the base
adapter to the outlet side of the tee.
d. Connect the 20” long hose to the inlet side of
the tee with the ‘C ‘.
e. Connect the ½” connection of the adapter to
the outlet of the foot pedal valve. Use Teflon
tape to seal.
f. Connect the other end of the 20” long hose to
the adapter.
Step 3: Supply Connections-
a. To supply the unit, the hot and cold water supply both
the faucet and foot pedal valves. Supply stops, tees,
unions and pipes are supplied to make these
connections.
b. Connect the stop, tee and union together as shown in
the figure. Connect the cold supply line to the stop.
From the side port of the tee make connection to cold
inlet for the faucet and eyewash.
c. Connect the stop, tee and union together as shown in
the figure. Connect the hot supply line to the stop.
From the side port of the tee make connection to hot
inlet for the faucet.
d. Using the union, make the connection to the inlet for
the foot pedal valves.
Step 4: Unit Flushing-
a. Before inserting the aerator into the faucet, activate the faucet to flush both the hot and cold sided
of the fixture. Check all connections for leaks
b. Replace aerator into faucet outlet.
c. Activate the faucet and then activate the eyewash by pulling the handle and assure proper spray
formation and no leaks are present. If continuous hot water is felt coming through the eyewash,

SPEAKMAN®
PO Box 191 Wilmington, DE 19899 Phone: [phone] Fax: [phone]
Visit us on the web at www.speakmancompany.com
9/07 rev.2
92-2451
Page 4 of 4
the supply connections are crossed. Undue connections and follow directions in step 3 for proper
installation.
IMPORTANT: The supply line for plumbed eyewash units shall provide an uninterruptible supply of
flushing fluid at a minimum of 30 psi. of flow pressure. If shut off valves are installed in the supply line
of the eyewash for maintenance purposes, provisions shall be made to prevent unauthorized shut off.
TESTING PROGRAM
ANSI Z358.1 requires that all emergency equipment shall be tested weekly to verify proper operation
and inspected annually to assure conformance with ANSI Z358.1 - 1998 requirement.
OPTIONS (Foot Pedal Only)
◊ UAS – Union Angle Stops ◊