Speco HINT13D7G User manual

HINT13D7G
650Line Intensifier3
TM
Tamperproof Dome
w/Chameleon Co er
3.6mm lens
Wall/Ceiling Mount
Please read this manual thoroughly before operation and keep
it handy for further reference.
Wall/Ceiling Mount
All manuals and user guides at all-guides.com
all-guides.com

The lighting flash with an arrowhead symbol, within an equilateral triangle is
Intended to alert the user to the presence of un-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons____________________________________
The e clamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (serving) instructions
i n
the
l i t e r at u r e
a cc o mp a n y i ng
the
appliance
__________________
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK
D O N O T R E M O V E C O V E R ( O R B A C K ) .
N O U S E R S E R V I C E A B L E P A R T S I N S I D E
R E F E R S E R V I C I N G T O Q U A L I F I E D
S E R V I C E P E R S O N N E L . _______________
CAUTION
WA NING & CAUTION
DO NOT use power sources other than that specified.______
i n
the
l i t e r at u r e
a cc o mp a n y i ng
the
appliance
__________________
I N F O M A T I O N - T h i s e q u i p m e n t h a s b e e n t e s t e d a n d f o u n d t o c o mp a n y w i t h
l i m i t s f o r a c l a s s a d i g i t a l d e v i c e P u r s u a n t t o p a r t 1 5 o f t h e F C C r u l e s .
T h e s e l i m i t s a r e d e s i g n e d t o p r o v i d e r e a s o n a bl e p r ot e c ti o n a g ai n s t h a r m f u l
I n t e r f e r e n c e W h e n t h e e q u i p m e n t s o p e r a t e d i n a c o m m e r c i a l e n v i r o n m e n t .
T h i s e q u i p me n t g e ne r a t es , u s e s, a n d C a n R ad i a t e ra d i o f re q u e n cy e n e r gy a n d
i f n o t in s t al l e d an d us e d i n a c co r d an c e w i t h t h e i n s tr u c ti o n ma n u a l , m a y C a u se
H a r mf u l i n t e rf e r en c e to r a di o c o mm u n i c at i o n s. O p er a ti o n o f t h i s e q u i p me n t i n a
r e s i d e n t i a l a r e a i s l i k e l y t o c a u s e h a r m f u l i n t e r f e r e n c e i n w h i c h
C a se t h e u se r w i l l b e r e q u i r e d t o c or r e c t t h e i n te r f e r en c e a t h i s o wn e p en s e .
WA NING – Change or modification not e pressly approved by the manufacturer could void
the user’s authori ty to operate the equipment__________________________________
CAUTION : To prevent electric shock and risk of fire hazards.
DO NOT e pose this appliance to rain or moisture.000
This installation should be made by a qualified service person and should conform to all local codes.
2
All manuals and user guides at all-guides.com

PACKAGE CONTENTS
Please make sure that the following items are included
in the Package:
-3 Mounting Screws and Anchors
-1 Set Screw
-1 Video Test Connector
-1 Power Cable
-1 Chameleon Cover
3
All manuals and user guides at all-guides.com

CAME A INSTALLATION
Place the Chameleon Dome over the camera and push until it snaps
into position.
CHAMELEON COVE
4
* Spray the color of your choice onto the Chameleon cover
* If necessary, apply a second coat
* Painting method for the Chameleon Dome
● Notes : Optional painting before installation
All manuals and user guides at all-guides.com

FEATU ES
More Powerful Performance in low light condition.
High quality Pictures to be captured in very low light condition.
INTENSIFIER 3
Horizontal resolution of 650 TV lines is achieved by using a
SONY Super-HAD CCD with 410,000 pi els, and a custom DSP
yielding pictures with a high S/N ratio.
650TVL Resolution
PRESETS (Outdoor, Indoor, Elevator, Lobby, Hallway & Low Light)
Used for a quick and easy setup for the installation environment.
Now with “PRESETS”
5
The Intensifier camera has a DSP chip that can remove image
noise efficiently showing clean images in low light conditions.
SPECO DNR
More Powerful WDR in strong back lighting.
Your camera allows you to get a clear image.
WDR
This function reverses bright spots in the picture (such as
headlights). This enables the entire system to do a better job of
resolving and displaying grayscale information such as a
license plate.
LC ( igh Light Compensation)
All manuals and user guides at all-guides.com

FEATU ES
This function removes image jitter that is caused by vibrations in
the building and reduces the amount of hard drive space.
STABILIZER
It also has the ability to mask up to 8 areas of the picture where
Viewing is not desired. Each zone can be independently
programmed via the OSD
PRIVACY MASK
The picture could be enlarged by this function in digital.
DIGITAL ZOOM
6
All camera functions are menu driven for easy use.
OSD
The Intensifier camera can show color pictures in all lighting
conditions, or you can have it automatically switch to a B/W
picture in low light conditions
DAY/NIG T
All manuals and user guides at all-guides.com
all-guides.com

OSD MENU T EE
CAM NAME
LENS
DC IRIS / MANUAL
INTENSIFIE
AGC / SHUTTER / INTENSIFY / INITIAL SET / PREVIOUS
ADVANCED MENU
P ESETS
INDOOR / OUTDOOR / LOW LIGHT / LOBBY / HALLWAY / ELEVATOR
ADVANCED
EXIT
MAIN MENU
7
EXIT
DAY / NIGHT
WD / BLC / HLC
SPECO DN
COLO TEMP
EFFECTS
SPECIAL
AUTO / DAY / NIGHT / EXT
AWC-SET / MANUAL / ATW1 / ATW2
DZOOM / IMAGE FREEZE / D-EFFECT / CONTRAST / SHARPNESS /
COLOR ADJUST / INITIAL SET / PREVIOUS
MOTION DET / PRIVACY MASK / LANGUAGE / STABILIZER / LL SYNC /
MONITOR TYPE / FACTORY RESET / PREVIOUS
DNR LEVEL / SSC (Speco Sensitivity Control)
All manuals and user guides at all-guides.com

OSD MENU DETAILS
1. P ESET
[INDOOR / OUTDOOR / LOW LIGHT / LOBBY / HALLWAY / ELEVATOR]
Quick & Easy Way to install without complicated OSD menu setting!
** Attention : Select any preset mode and push the set button once,
Blinking status means it is correctly set up at that mode.
8
* * If you need more detailed setting, click ‘ADVANCED’ to see more
OSD menu at every preset mode.
2. INTENSIFIE
[AGC / SHUTTER / INTENSIFY / INITIAL SET / PREVIOUS]
- AGC (Off / Low / Middle / High)
: Adjusts value of AGC gain and increases the GAIN level to
brighten the picture. (noise / distortion may develop)
-SHUTTE
* FLK - Flicker-less mode (FLK) reduces on-screen flickering.
* ESC - Electronic Shutter Control (AUTO) adjusts brightness
level on screen.
- INTENSIFY : Automatically provides a clear image under low-
light conditions. You can control the ma imum low-light magnification
from 2 to 512 (increasing magnification may cause noise/distortion).
This function is deactivated when SHUTTER is set to FLK mode.
All manuals and user guides at all-guides.com

OSD MENU DETAILS
4. WD / BLC / HLC
-WD
: Provides light level control to overcome severe back light conditions.
- HLC (High Light Compensation)
: High Light Compensation removes the high light and makes it possible
to view the image clearly.
3. DAY/NIGHT
[AUTO / DAY / NIGHT]
-DAY : Full time color mode
-NIGHT : Full time black & white mode
- AUTO (D/N LEVEL / DWELL TIME / NIGHT BURST)
** Attention : AUTO is disabled when the AGC in INTENSIFIE is ‘Off’.
9
5. COLO TEMP
[AWC SET / MANUAL / ATW1 / ATW2]
- AWC SET
: Set while pointing the camera towards a sheet of white paper.
- MANUAL
: It allows you to increase or decrease the red or blue factor on screen.
Set the ATW1 firstly then turn the manual value.
- ATW 1
: Select Auto Tracking White Balance (ATW) when the color temperature
is 2400 ° K~10500 ° K.
- ATW 2
: When reduce color rolling.
** Attention : White Balance may not work properly when in special
light condition such as clear sky, sunset, dim lighting, mixed
lights providing different temp. etc.
All manuals and user guides at all-guides.com

OSD MENU DETAILS
7. EFFECTS
[DZOOM / IMAGE FREEZE / D-EFFECT / CONTRAST / SHARPNESS /
COLOR ADJUST / INITIAL SET / PREVIOUS]
6. SPECO DN
- Reduces noise/distortion on the screen
to save a recording capacity.
Increasing the DNR level reduces noise
but may introduce video artifacts.
DNR is deactivated if AGC is turned off.
** SSC (Speco Sensitivity Control)
- adjusts the brightness level in low light
condition only. Tune right value to get a
Right image data in low light .
10
-DZOOM : Digital Zoom. Select this and set a desired zoom level to obtain
an e tended focal length.
-IMAGE F EEZE : To hold the image to analyze precisely.
-D-EFFECT : Change the video direction. Vertical Flip, Mirror, and Rotate
-CONT AST : Adjust contrast Level that you desired.
-SHA PNESS : Adjust Sharpness Level. Increasing this value, the picture
outline becomes stronger and clear.
-COLO ADJUST : Adjust various color options for the camera (Color
toggle, Color Level, Color Hue, Red Gain, Blue Gain)
-INITIAL SET : Return to the default setting defined in the "EFFECT"
menu.
All manuals and user guides at all-guides.com

OSD MENU DETAILS
8. SPECIAL
[MOTION DET / PRIVACY MASK / LANGUAGE / STABILIZER / LL SYNC
/ MONITOR TYPE / FACTORY RESET / PREVIOUS]
- MOTION DET.
: Built in motion detector with adjustable areas of coverage will send a
signal to an e ternal alarm device when motion is detected.
* Zone Number: Select MD area to activate: 8 Areas can be selected.
* Zone Stat: Determine MD area selected.
* Width / Height: Set the size of MD
* Move X/Y: Set the coordinate for the MD position.
* Sensitivity: 8 levels. When sensitivity number is high, motion detection
sensitivity is increased to recognize even small movements.
- P IVACY MASK
Mask up to 8 areas of the screen from video monitoring.
* Mask Number: Select PM area to activate. 8 Areas can be selected.
* Mask Stat
: Determine PM area selected.
11
* Mask Stat
: Determine PM area selected.
* Mask Color: Determine area color. Grey, White, Red, Green, Blue,
Yellow, Black colors are available.
* Width / Height: Set the size of PM
* Move X/Y: Set the coordinate of the PM position.
-LANGUAGE
: ENGLISH / RUSSIAN / SPANISH / FRENCH / POLISH / GERMAN
-STABILIZE
: Mitigate any picture movement by e ternal factors as wind.
-LL SYNC : Synchronizes the output phase of multiple cameras.
* INT : Internal Synchronization
* L/L : Power Synchronization type, Line-Lock
*Remark : When using DC12V, SYNC menu is fi ed to INT mode.
When using AC24V, the L/L is available.
- MONITO TYPE
: LCD/ CRT monitor type is selectable.
All manuals and user guides at all-guides.com
all-guides.com

Item Intensifier 3 Camera
Power Source 12VDC ONLY
Power Consumption 210mA
Image Sensor 1/3”, SONY SUPE HAD II CCD, 410,000 pixels
Total Pixels 811(H) x 508(V) , 1/3” CCD
Effective Pixels 768(H) x 494(V) , 1/3” CCD
Lens Type 3.6mm Fixed Lens
Maximum Aperture atio 1 : 1.3 ~2.0
Scanning System 2 : 1 Interlaced 525 Lines / 60 Fields / 30 Frames
Synchronization Internal
Video Output 1.0V [p-p] Composite, 75Ω
esolution 650 TV Line
Gain Control
Low / Middle / High / OFF selectable
SPECIFICATIONS
Gain Control
Low / Middle / High / OFF selectable
Electric Shutter Speed 1/60 ~ 1/90,000 sec
INTENSIFIE 3 Built-in ( selectable limit ~ X512)
COLO TEMP (White
Balance) ATW 1 / ATW 2 / AWC SET / MANUAL
Min. Illumination 0.00002Lux (intensifier) 0.03Lux (shutter)
S/N ( Y signal) 52dB (Weight On)
SPECO DN ON - DYNAMIC / OFF
Motion Detection ON / OFF (8 Programmable Zone)
OSD Built - in
Privacy Function ON / OFF (8 Programmable Zone)
Operational Temperature -29 ℃
℃℃
℃ ~ +50 ℃
℃℃
℃ ( - 20 ℉
℉℉
℉ ~122 ℉
℉℉
℉ )
Operational Humidity 30% ~90% H
12
All manuals and user guides at all-guides.com

DIMENSIONS
* TOP VIEW
27
DIA 80
DIA 110
* SIDE VIEW
78
HIGH IMPACT DOME
13
All manuals and user guides at all-guides.com

WA ANTY
14
All manuals and user guides at all-guides.com

MEMO
All manuals and user guides at all-guides.com

200 New Highway
Amityville, NY 11701
631-957-8700
www.specotech.com
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without notice
and without incurring any obligation.
ev. 120122
All manuals and user guides at all-guides.com
all-guides.com